Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “switches”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Vacuum stability testing of Apollo 15 Scientific Instrument Module (SIM) non-metallic materials and reversion of silicone rubber in a motor switch

Vacuum stability screening tests were performed on the Apollo 15 Scientific Instrument Module (SIM) bay nonmetallic materials in accordance with the NASA document SP-R-0022. The testing was necessary to support the evaluation to determine the effect material outgassing contamination would have on the SIM bay optical lenses and sensing devices. The Apollo 15 SIM experiments were highly successful, therefore, it is assumed that contamination due to the outgassing of nonmetallic materials did not affect equipment operation. A related problem, the reversion of a silicone rubber grommet which affected an electrical motor switch operation is also reported.

Clancy, H. M.↗
NASA NTRS1971

Detonation of insensitive high explosives by a Q-switched ruby laser.

Immediate longitudinal detonations have been observed in confined small-diameter columns of PETN, RDX, and tetryl by using a focused Q-switched ruby laser. The energy ranged from 0.8 to 4.0 J in a pulse width of 25 nsec. A 1000-A-thick aluminum film deposited on a glass window was used to generate a shock wave at the window-explosive interface when irradiated by the laser. In some cases, steady-state detonations were reached in less than .5 microsec with less than 10% variation in the detonation velocity.

Yang, L. C.↗
NASA NTRS1972

High power microstrip RF switches.

Description of a microstrip-type single-pole double-throw switch, which uses only two PIN diodes, eliminates usual dc blocking capacitors, and has demonstrated an RF power handling capacity greater than 100 W CW at S-band. The insertion loss is less than 0.25 dB, and the input-to-off port isolation is greater than 36 dB over a bandwidth larger than 30 MHz.

Choi, S. D.↗
NASA NTRS1974

Stress waves generated in thin metallic films by a Q-switched ruby laser

Investigation results on stress waves generated by Q-switched ruby laser irradiated thin metal films under confinement, studied over a wide range of film materials and film thicknesses, are reviewed. The results indicate that the dependence on these parameters is much weaker than is predicted by heat transfer estimations commonly used to describe the interaction of laser irradiation with unconfined bulk-solid surfaces.

Yang, L. C.↗
NASA NTRS1975

Transmitter switch for high-power microwave output

Combiner system can be used for combining output powers of two transmitters or for switching from one to the other. This can be done when pair of transmitters operate on same frequency and carriers are phase coherent as by excitation from single exciter.

Wiggins, C. P.↗
NASA NTRS1975

Switching regulator emission control circuit for ion sources

An electron emission control circuit of the switching regulator type operating at 100 kHz has been developed which maintains a constant emission current within 0.1% for a cathode power demand variation of approximately 100%. The power output stage has an efficiency of 67%, and the overall efficiency is 45% when driving a thoria-coated iridium cathode having a nominal resistance at operating temperature of 2.5 ohms. Under optimum conditions, the bus power demand is 1.75 W. The circuit is useful in controlling the electron emission current of ion sources in applications which involve a substantial variation of the cathode work function, such as oxygen partial pressure measurements over a large dynamic range.

Clay, F. P., Jr.↗
NASA NTRS1977

Feedback arrangement for regenerative switches

Load current feedback technique samples load current instead of collector current, which makes it possible to operate switching transistors at their maximum capacities for pulse loads.

Mclyman, W. T.↗
NASA NTRS1975

Ground power to fuel cell switch-over study

A functional operational description of orbiter ground power to fuel cell switch-over provisions is given. Emphasis is placed on the description of implementation, procedure and monitoring provisions associated with turn-around operation, at the Kennedy Space Center ground operations and launch facility.

Emmons, T. E.↗
NASA NTRS1975

A dynamic packet-switching system for satellite broadcast channels

A new satellite multi-access scheme for packet-switching computer communications combines a dynamic allocation technique with conventional time-division multiplexing to minimize delays and maximize traffic thruput. The scheme is designed to give the shortest delays to short-duration interactive or priority traffic, at the expense of longer delays for large data transfers. Simulation results show markedly improved delay-thruput characteristics over conventional time-division multiplexing for a wide range of traffic mixes, with especially significant performance gains as the traffic imbalance among the nodes increases.

Binder, R.↗
NASA NTRS1977

Development of a 1000V, 200A, low-loss, fast-switching, gate-assisted turn-off thyristor

The results of a program to develop a fast high power thyristor that can operate in switching circuits at frequencies of 10 to 20 kHz with very low power loss are given. Feasibility was demonstrated for a thyristor that blocks 1000V forward and reverse, conducts 200A, turns on in little more than 2 more microseconds with only 2A of gate drive, turns off in 3 microseconds with 2A of gate assist current and has an energy dissipation of only 12 mJ per pulse for a 20 microsecond half sine wave 200A pulse. Data were generated that clearly showed the tradeoffs that can be made between the turn off time and forward drop. The understanding of this relationship is necessary in the selection of deliverable thyristors with turn off times up to 7 microseconds to give improved efficiency in a series resonant dc to dc inverter application.

Schlegel, E. S.↗
NASA NTRS1977

Spatial filter for Q-switched lasers

A spatial filtered Q-switched laser system is reported that prevents ionization of air in close proximity to the aperture of the spatial filter. A compound lens system having an astigmatic focus is positioned between the laser and the spatial filter for defocusing the light beam emanating from the laser in the vicinity of the aperture of the spatial filter to an intensity below that which produces ionization of air. The preferred construction of the compound lens system as viewed from the laser comprises a cylindrical lens and a pair of positive lenses.

Wuerker, R. F.↗
NASA NTRS1977

Optimal design of mixed-media packet-switching networks - Routing and capacity assignment

This paper considers a mixed-media packet-switched computer communication network which consists of a low-delay terrestrial store-and-forward subnet combined with a low-cost high-bandwidth satellite subnet. We show how to route traffic via ground and/or satellite links by means of static, deterministic procedures and assign capacities to channels subject to a given linear cost such that the network average delay is minimized. Two operational schemes for this network model are investigated: one is a scheme in which the satellite channel is used as a slotted ALOHA channel; the other is a new multiaccess scheme we propose in which whenever a channel collision occurs, retransmission of the involved packets will route through ground links to their destinations. The performance of both schemes is evaluated and compared in terms of cost and average packet delay tradeoffs for some examples. The results offer guidelines for the design and optimal utilization of mixed-media networks.

Huynh, D.↗
NASA NTRS1977

Submillimeter-wave laser operating in a passive Q-switched intracavity pump mode

Pulsed operation of submillimeter gas lasers was achieved with the laser gas inside the resonator of the CO2 pump laser acting as a saturable absorber for passive Q switching the CO2 laser. With a metal-oxyde-metal whisker detector 1-5-microsec-wide pulses could be detected at 118, 373, and 496 micron wavelength.

Koepf, G. A.↗
NASA NTRS1978

IC implementation of crossbar switches

Basic switching-element configuration can be expanded to more complex networks by coupling basic building blocks in appropriate way. In all cases, binary addressing of input and output ports is used.

Anderson, T. O.↗
NASA NTRS1979

Power-switch dV/dt sensing

Simple means for controlling voltage risetime and powerline noise used three transistors and capacitive feedback. Rate of change of voltage across load is reduced and controlled by circuit. Circuit is useful in situations where large wire bundles are subject to noise and crosstalk due to rapid current switching.

Jones, R. L.↗
NASA NTRS1978

Electronic switching spherical array antenna

This work was conducted to demonstrate the performance levels attainable with an ESSA (Electronic Switching Spherical Array) antenna by designing and testing an engineering model. The antenna was designed to satisfy general spacecraft environmental requirements and built to provide electronically commandable beam pointing capability throughout a hemisphere. Constant gain and beam shape throughout large volumetric coverage regions are the principle characteristics. The model is intended to be a prototype of a standard communications and data handling antenna for user scientific spacecraft with the Tracking and Data Relay Satellite System (TDRSS). Some additional testing was conducted to determine the feasibility of an integrated TDRSS and GPS (Global Positioning System) antenna system.

Stockton, R.↗
NASA NTRS1978

Development of a nonlinear switching function and its application to static lift characteristics of straight wings

A mathematical modeling technique was developed for the lift characteristics of straight wings throughout a very wide angle of attack range. The technique employs a mathematical switching function that facilitates the representation of the nonlinear aerodynamic characteristics in the partially and fully stalled regions and permits matching empirical data within + or - 4 percent of maximum values. Although specifically developed for use in modeling the lift characteristics, the technique appears to have other applications in both aerodynamic and nonaerodynamic fields.

Hewes, D. E.↗
NASA NTRS1978

On the fundamental structure of Galois switching functions

In connection with investigations conducted by Menger (1969), Benjauthrit and Reed (1976), and Pradhan (1978) two methods have been reported for deriving a unique Galois switching function from a given truth table description of the function. However, neither of the two methods appears satisfactory. One method often contains many redundant terms in its formulation, whereas the second method requires a great number of multiplications and additions. By some algebraic manipulations, an expanded formula is obtained which combines the best features of both methods. This formula makes it possible to compute the coefficients of the desired function more directly and probably with less effort. The conduction of calculations by means of the new formula is illustrated with the aid of examples.

Benjauthrit, B.↗