Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lifetime”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

On the Definition of the Prompt Neutron Lifetime

There are myriad definitions for the mean neutron lifetime, neutron generation time, and other related quantities to characterize a neutron and its progeny’s propagation through an assembly. In this document, we consider lifetime definitions that are associated with eigenvalue forms of the neutron transport equation. Specifically, we focus on the two most widely used eigenvalues: the $\kappa$ eigenvalue and the $\alpha$ eigenvalue. These eigenvalues are used more often than other eigenvalues due to the physical phenomenon they capture. The $\kappa$ eigenvalue allows for the ability to determine if the system can sustain a chain reaction, while the $\alpha$ eigenvalue captures the asymptotic time dependent behavior of the system. An advantage of using these eigenvalues resides in the biorthogonality of the solutions with their adjoint counterpart. This feature allows us to simplify the expressions and to obtain appropriately weighted definitions that highlight important physics and regions of an assembly.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

2022 Report - SRNL Aging and Lifetimes program tritium aging studies on structural alloys

This report documents work performed in fiscal year 2022 at SRNL in support of the Aging and Lifetimes program. This work is an enduring collaboration between SRNL and SNL to study tritium embrittlement of structural metals used in Gas Transfer System reservoirs. The measured data inform component lifetime assessments and predictions. Test coupons are thermally pre-charged with tritium and allowed to age at cryogenic temperatures to freeze out tritium diffusion and minimize off-gassing while allowing for decay helium levels to build. Coupons are removed and tested at planned intervals to measure how mechanical properties degrade as helium levels increase. This report summarizes test results from coupons which are in various stages of aging as they were tritium pre-charged in previous years, as well as documenting one new charging run.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

NMPWG Discussion on - Tracking Initial SAVY-4000 Population and Lifetime Extensions Across the DOE Complex [Slides]

As part of LANL's SAVY-4000 Lifetime Extension efforts, the question of "when does a SAVY's life start?" was posed. The unfortunate answer that can be agreed upon is to start the life based on the serial number which includes month and date of manufacture. For example - 012405025 was a 5QT container produced in January of 2024. This is not the most efficient way to track age of a container if extended lifetimes and usage are desired. Other possibilities include: Tracking on first-use date (date it was loaded); Tracking when it was sold from the warehouse to an operating group for use; Tracing the amount of time nuclear material is within the container (LANMAS transaction histories).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

2023 SRNL Aging and Lifetimes Report: Tritium Aging of Welded and Additively Manufactured Austenitic Stainless Steels

This report documents work performed in fiscal year 2023 at Savannah River National Laboratory (SRNL) collaborating with Sandia National Laboratories in support of the Aging and Lifetimes program. This work supports Gas Transfer Systems (GTS) design by measuring the mechanical behavior of structural materials used in GTS. Data on properties in relevant conditions are crucial for GTS lifetime assessments and predictions. To simulate relevant conditions, SRNL, in concert with the Savannah River Site, thermally pre-charges test specimens with tritium and stores them at -80°C to allow the tritium decay product, helium-3, to build up while limiting tritium diffusion. According to test plans based on how much helium-3 has accumulated, specimens are removed from storage and tested. Results from mechanical testing provide an empirical basis for GTS design as well as insight to how these structural materials degrade in a tritium environment.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Overview of SAVY-4000 Lifetime Extension Activities in Fiscal Year 2024

This report provides an overview of activities engaged in during the 2024 fiscal year in support of the SAVY-4000 (hereafter “SAVY”) lifetime extension. As the final full year prior to the submittal of the technical basis, efforts were made to assess the current understanding regarding SAVY degradation in service as well as any knowledge that provided a more substantive view of the challenges that SAVYs face in storage. Close coordination with the stakeholders (i.e. LANL program office) ensured alignment with expectations regarding timelines for the remainder of the activities supporting the technical basis document for the lifetime extension request.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Measure Effects of Molten Halide Salt on Creep Rupture Lifetime for 316H, 709 and 617

Ongoing commercialization of different molten salt reactor concepts can considerably benefit from quantitative information on the impact of molten halide salts on the engineering properties such as creep and fatigue strength of materials of interest. Limited legacy data from the molten salt reactor experiment (MSRE) program showed a significant reduction in creep rupture strength of a Ni-base alloy in molten fluoride salt. This task evaluated the creep behavior of candidate structural materials 316H, 709 and 617 for advanced nuclear reactors under molten halide salt environments at 650, 700 and 750°C respectively. Creep tests were conducted in air, Ar, fluoride (FLiNaK) and chloride (NaCl-MgCl 2 ) salts. The molten salt environment caused a 50% reduction in creep rupture lifetime for 316H in FLiNaK and an 80% reduction in creep rupture lifetime in NaCl-MgCl 2 compared to air exposures. The molten fluoride salt environment resulted in almost a 90% and 50% reduction in creep rupture time for 709 and 617 irrespective of the cover gas environment (air and Ar). Significant differences in the compositional changes between the salt- and air-facing surfaces were observed in the alloy subsurface which might have potentially lead to formation of phases detrimental to the creep behavior.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

An Engineering Approach for Weld Creep Lifetime Assessment Based on Local Property Measurement

The localized creep failure in the heat-affected zone (HAZ) of Grade 91 steel weldments has been identified as one of the most important factors causing significantly shortened service lifetime and structural integrity issues of welded components in advanced fossil and nuclear power plants. To conduct a reliable creep lifetime assessment, a new engineering assessment approach has been developed by incorporating the experimentally determined local properties of the heterogeneous HAZ. By creep testing a purposely simulated HAZ specimen with in situ digital image correlation (DIC) technique, the highly gradient creep properties across the HAZ of Grade 91 steel was quantitatively measured. A physical creep cavitation constitutive model was proposed to investigate the local creep deformation and damage accumulation within the heterogeneous HAZ, which takes into account the nucleation of creep cavities and their growth by both grain boundary diffusion and creep deformation. The relationship among the local material property, creep strain accumulation, and evolution characteristic of creep cavities was established. The approach was then utilized to investigate the creep response and subsequent life for an ex-service 9% Cr steel weldment by incorporating the effects of pre-existing damages which developed and accumulated during long-term services. The predicted results exhibited quantitative agreement with the DIC measurement in terms of both nominal/local creep deformation as well as the subsequent life under the test conditions at 650 and 80 MPa.

Zhang, Wei↗
DOE OSTI2021

Potential Activities and Long Lifetimes of Organic Carbon-Degrading Extracellular Enzymes in Deep Subsurface Sediments of the Baltic Sea

Heterotrophic microorganisms in marine sediments produce extracellular enzymes to hydrolyze organic macromolecules, so their products can be transported inside the cell and used for energy and growth. Therefore, extracellular enzymes may mediate the fate of organic carbon in sediments. The Baltic Sea Basin is a primarily depositional environment with high potential for organic matter preservation. The potential activities of multiple organic carbon-degrading enzymes were measured in samples obtained by the International Ocean Discovery Program Expedition 347 from the Little Belt Strait, Denmark, core M0059C. Potential maximum hydrolysis rates (V max ) were measured at depths down to 77.9mbsf for the following enzymes: alkaline phosphatase, β- d -xylosidase, β- d -cellobiohydrolase, N-acetyl-β- d -glucosaminidase, β-glucosidase, α-glucosidase, leucyl aminopeptidase, arginyl aminopeptidase, prolyl aminopeptidase, gingipain, and clostripain. Extracellular peptidase activities were detectable at depths shallower than 54.95mbsf, and alkaline phosphatase activity was detectable throughout the core, albeit against a relatively high activity in autoclaved sediments. β-glucosidase activities were detected above 30mbsf; however, activities of other glycosyl hydrolases (β-xylosidase, β-cellobiohydrolase, N-acetyl-β-glucosaminidase, and α-glucosidase) were generally indistinguishable from zero at all depths. These extracellular enzymes appear to be extremely stable: Among all enzymes, a median of 51.3% of enzyme activity was retained after autoclaving for an hour. We show that enzyme turnover times scale with the inverse of community metabolic rates, such that enzyme lifetimes in subsurface sediments, in which metabolic rates are very slow, are likely to be extraordinarily long. A back-of-the-envelope calculation suggests enzyme lifetimes are, at minimum, on the order of 230days, and may be substantially longer. These results lend empirical support to the hypothesis that a population of subsurface microbes persist by using extracellular enzymes to slowly metabolize old, highly degraded organic carbon.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

A research program to measure the lifetime of spin polarized fuel

The use of spin polarized fuel could increase the deuterium-tritium (D-T) fusion cross section by a factor of 1.5 and, owing to alpha heating, increase the fusion power by an even larger factor. Issues associated with the use of polarized fuel in a reactor are identified. Theoretically, nuclei remain polarized in a hot fusion plasma. The similarity between the Lorentz force law and the Bloch equations suggests polarization can be preserved despite the rich electromagnetic spectrum present in a magnetic fusion device. The most important depolarization mechanisms can be tested in existing devices. The use of polarized deuterium and 3 He in an experiment avoids the complexities of handling tritium, while encompassing the same nuclear reaction spin-physics, making it a useful proxy to study issues associated with full D-T implementation. 3 He fuel with 65% polarization can be prepared by permeating optically-pumped 3 He into a shell pellet. Dynamically polarized 7 Li-D pellets can achieve 70% vector polarization for the deuterium. Cryogenically-frozen pellets can be injected into fusion facilities by special injectors that minimize depolarizing field gradients. Alternatively, polarized nuclei could be injected as a neutral beam. Once injected, the lifetime of the polarized fuel is monitored through measurements of escaping charged fusion products. Multiple experimental scenarios to measure the polarization lifetime in the DIII-D tokamak and other magnetic-confinement facilities are discussed, followed by outstanding issues that warrant further study.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

MEGASIM: Lifetimes and Resonances of Earth Trojan Asteroids—The Death of Primordial ETAs?

Abstract We present an analysis of lifetimes and resonances of Earth Trojan Asteroids (ETAs) in the MEGASIM data set. Trojan asteroids co-orbit the Sun with a planet, but remain bound to the Lagrange points, L4 (60° leading the planet) or L5 (60° trailing). In the circular three-body approximation, the stability of a Trojan asteroid depends on the ratio of the host planet mass and the central mass. For the inner planets, the range of stability becomes increasingly small, so perturbations from the planets have made primordial Trojans rare. To date, there have been just two ETAs (2010 TK 7 and 2020 XL 5 ), several Mars Trojans, and a Venus Trojan discovered. The estimated lifetimes of the known inner system Trojans are shorter than a million years, suggesting they are interlopers rather than members of a stable and long-lasting population. With the largest ETA n -body simulation to date, we are able to track their survival across a wide initialized parameter space. We find that the remaining fraction of ETAs over time is well fit with a stretched exponential function that, when extrapolated beyond our simulation run time, predicts zero ETAs by 2.33 Gyr. We also show correlations between ETA ejections and the periods of the Milankovitch cycles. Though Earth’s orbital dynamics dominate the instabilities of ETAs, we provide evidence that ETA ejections are linked to resonances found in the variation of the orbital elements of many if not all of the planets.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2014

Modelled Black Carbon Radiative Forcing and Atmospheric Lifetime in AeroCom Phase II Constrained by Aircraft Observations

Black carbon (BC) aerosols absorb solar radiation, and are generally held to exacerbate global warming through exerting a positive radiative forcing1. However, the total contribution of BC to the ongoing changes in global climate is presently under debate2-8. Both anthropogenic BC emissions and the resulting spatial and temporal distribution of BC concentration are highly uncertain2,9. In particular, long range transport and processes affecting BC atmospheric lifetime are poorly understood, leading to large estimated uncertainty in BC concentration at high altitudes and far from emission sources10. These uncertainties limit our ability to quantify both the historical, present and future anthropogenic climate impact of BC. Here we compare vertical profiles of BC concentration from four recent aircraft measurement campaigns with 13 state of the art aerosol models, and show that recent assessments may have overestimated present day BC radiative forcing. Further, an atmospheric lifetime of BC of less than 5 days is shown to be essential for reproducing observations in transport dominated remote regions. Adjusting model results to measurements in remote regions, and at high altitudes, leads to a 25% reduction in the multi-model median direct BC forcing from fossil fuel and biofuel burning over the industrial era.

black carbon↗
DOE OSTI2015

Organic photolysis reactions in tropospheric aerosols: effect on secondary organic aerosol formation and lifetime

This paper presents the first modeling estimates of the potential effect of gas- and particle-phase organic photolysis reactions on the formation and lifetime of secondary organic aerosols (SOAs). Typically only photolysis of smaller organic molecules (e.g., formaldehyde) for which explicit data exist is included in chemistry–climate models. Here, we specifically examine the photolysis of larger molecules that actively partition between the gas and particle phases. The chemical mechanism generator GECKO-A is used to explicitly model SOA formation from α-pinene, toluene, and C 12 and C 16 n-alkane reactions with OH at low and high NO x . Simulations are conducted for typical mid-latitude conditions and a solar zenith angle of 45° (permanent daylight). The results show that after 4 days of chemical aging under those conditions (equivalent to 8 days in the summer mid-latitudes), gas-phase photolysis leads to a moderate decrease in SOA yields, i.e., ~15 % (low NO x ) to ~45 % (high NO x ) for α-pinene, ~15 % for toluene, ~25 % for C 12 n-alkane, and ~10 % for C 16 n-alkane. The small effect of gas-phase photolysis on low-volatility n-alkanes such as C 16 n-alkane is due to the rapid partitioning of early-generation products to the particle phase, where they are protected from gas-phase photolysis. Minor changes are found in the volatility distribution of organic products and in oxygen to carbon ratios. The decrease in SOA mass is increasingly more important after a day of chemical processing, suggesting that most laboratory experiments are likely too short to quantify the effect of gas-phase photolysis on SOA yields. Our results also suggest that many molecules containing chromophores are preferentially partitioned into the particle phase before they can be photolyzed in the gas phase. Given the growing experimental evidence that these molecules can undergo in-particle photolysis, we performed sensitivity simulations using an empirically estimated SOA photolysis rate of J SOA = 4 × 10 −4 J NO 2 . Modeling results indicate that this photolytic loss rate would decrease SOA mass by 40–60 % for most species after 10 days of equivalent atmospheric aging at mid-latitudes in the summer. It should be noted that in our simulations we do not consider in-particle or aqueous-phase reactions which could modify the chemical composition of the particle and thus the quantity of photolabile species. The atmospheric implications of our results are significant for both the SOA global distribution and lifetime. GEOS-Chem global model results suggest that particle-phase photolytic reactions could be an important loss process for SOA in the atmosphere, removing aerosols from the troposphere on timescales of less than 7 days that are comparable to wet deposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Arsenic doped Cd-rich CdTe: equilibrium doping limit and long lifetime for high open-circuit voltage solar cells greater than 900 mV

The combination of group-V element doping and Cd-rich composition is the most promising current strategy for maximizing p-type doping while preserving long lifetime. In this study, we carefully measure the equilibrium p-type doping limit for As-doped Cd-rich CdTe single crystals and demonstrate a doping limit in the low 10 17 cm –3 range upon slow cooling. Here, we present evidence for self-compensation with rapidly decreasing doping efficiency per added As above 5 × 10 16 cm –3 , yet we also demonstrate CdTe with >10 17 cm –3 hole concentration and bulk lifetime >30 ns. Such crystals allow As-doped CdTe photovoltaic devices with open-circuit voltage exceeding 900 mV.

14 SOLAR ENERGY↗
DOE OSTI2018

Significance of metastable acceptors in Cu(In,Ga)Se 2 solar cells in accelerated lifetime testing

The significance of metastable acceptors in Cu(In,Ga)Se 2 (CIGS) solar cells in accelerated lifetime testing has been investigated. Dry heating under light irradiation improves the conversion efficiency of CIGS solar cells at the early stage, which slightly decreases after long-term testing. However, after dry heating in the dark, the conversion efficiency significantly decreases. The net acceptor concentration considerably decreases after dark heating, and the reduction in the number of metastable acceptors results in decreases in open-circuit voltage and fill factor. After heat illumination treatment, the net acceptor concentration increases because of the metastable acceptors in CIGS layers, and the open-circuit voltage and fill factor partly recover. Therefore, the concentrations of metastable acceptors should be controlled by light irradiation or current injection with positive bias to evaluate correctly the degradation rates during accelerated lifetime testing.

14 SOLAR ENERGY↗
NASA NTRS1972

Photochemistry and lifetimes of interstellar molecules

A quantitative discussion is presented of the lifetime against photodecomposition, or the probability of photodecomposition, of interstellar molecules. In addition to photodissociation, molecules can also be destroyed by interaction with high energy radiation and energetic particles. These processes are much less effective than destruction by ultraviolet radiation. However, when the ultraviolet is highly attenuated in clouds, the energetic radiation and particles will persist and will become relatively more important and the ultimate lifetimes in clouds may depend upon these processes.

Stief, L. J.↗
NASA NTRS1972

Lifetime estimates for sterilizable silver-zinc battery separators

The lifetime of separator membranes currently employed in the electrolyte environment of silver-zinc batteries was estimated at 3 to 5 years. The separator membranes are crosslinked polyethylene film containing grafted poly (potassium acrylate)(PKA), the latter being the hydrophilic agent which promotes electrolyte ion transport. The lifetime was estimated by monitoring the rate of loss of PKA from the separators, caused by chemical attack of the electrolyte, and relating this loss rate to a known relationship between battery performance and PKA concentration in the separators.

Cuddihy, E. F.↗
NASA NTRS1972

Radiative lifetimes and absolute oscillator strengths for the SiO A/super 1/Pi to X/super 1/Sigma+ transition.

Measurement of a radiative lifetime of 9.6 (plus or minus 1.0) nsec for the SiO A(super 1)Pi state is reported. RKR Franck-Condon factors have been computed and, with these, absolute oscillator strengths are calculated. A band system at 3022 A has been found that may be due to SiO+, but the band is not resolved at our experimental resolution, and identification remains uncertain. The upper state of the carrier of this spectrum has a radiative lifetime of 8.3 (plus or minus 0.8) nsec.

Smith, W. H.↗
NASA NTRS1975

Averaged initial Cartesian coordinates for long lifetime satellite studies

A set of initial Cartesian coordinates, which are free of ambiguities and resonance singularities, is developed to study satellite mission requirements and dispersions over long lifetimes. The method outlined herein possesses two distinct advantages over most other averaging procedures. First, the averaging is carried out numerically using Gaussian quadratures, thus avoiding tedious expansions and the resulting resonances for critical inclinations, etc. Secondly, by using the initial rectangular Cartesian coordinates, conventional, existing acceleration perturbation routines can be absorbed into the program without further modifications, thus making the method easily adaptable to the addition of new perturbation effects. The averaged nonlinear differential equations are integrated by means of a Runge Kutta method. A typical step size of several orbits permits rapid integration of long lifetime orbits in a short computing time.

Pines, S.↗