SEARCH · Engineering Papers

Results for “data guidelines”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

All sources NASA NTRS DOE OSTI

NASA NTRS2010

Louisiana Air Quality - Using ASTER, Landsat 5, and MODIS to Assess the Impact of Sugar Cane and Marsh Burning Practices on Local Air Quality

Biomass burning is an event that occurs globally and encompasses both human-initiated and naturally-occurring fires. It is estimated that 3 billion metric tons of biomass are burned every year worldwide (Curtis 2002). Societies have used these burning techniques for cooking and heating, clearing land for agricultural use, and removing excess biomass from grazing and croplands (Levine 1991). Our study focuses on the state of Louisiana and its commonly occurring methods of sugarcane and marsh biomass burning (LSU Ag.Center 2000; Nyman and Chabreck 1995). Over the centuries, the sugarcane industry in this state has steadily grown to surpass all other agriculture commodities. To promote efficiency within this large industry, burning excess biomass takes place throughout the harvesting period (LSU Ag.Center 2000). In addition to sugarcane, Louisiana contains 30% of the total coastal marsh of the United States (LSU Ag.Center 2000). The periodic burning of such marshes is an ecologically important management tool that is practiced throughout the Atlantic and Gulf Coasts (Nyman and Chabreck 1995). In most biomass burning instances, the leading by-product is particulate matter that is less than 10 microns in diameter (PM10). Through past research, this fine material has been shown to have negative health effects on surrounding populations (Boopathy2001). While burning guidelines have been set into place by the Louisiana Department of Agriculture and Forestry (LDAF) to reduce health effects, the guidelines are voluntary (LDAF 2000). To help quantify emission estimates, we will focus on Iberia Parish for sugarcane burning and Cameron Parish for marsh burning. Through analysis of ASTER, Landsat 5 TM, and MODIS data, our goal is to determine the amount and location of land area burned for the years 2008 and 2009 due to these practices. With emissions algorithms from Seiler and Crutzen, 1980, total acreage burned can be used to estimate emissions. This information will help to document the impact of these smoke plumes on local populations for the improvement of biomass burning policies in Louisiana.

Clark, Robert↗

NASA NTRS2014

Pharmacokinetic Modeling of Intranasal Scopolamine in Plasma Saliva and Urine

Wu, L.↗

NASA NTRS2014

Pharmacokinetic Modeling of Intranasal Scopolamine in Plasma Saliva and Urine

An intranasal gel formulation of scopolamine (INSCOP) was developed for the treatment of Space Motion Sickness. The bioavailability and pharmacokinetics (PK) were evaluated under the Food and Drug Administration guidelines for clinical trials for an Investigative New Drug (IND). The aim of this project was to develop a PK model that can predict the relationship between plasma, saliva and urinary scopolamine concentrations using data collected from the IND clinical trial with INSCOP. METHODS: Twelve healthy human subjects were administered three dose levels (0.1, 0.2 and 0.4 mg) of INSCOP. Serial blood, saliva and urine samples were collected between 5 min to 24 h after dosing and scopolamine concentrations measured by using a validated LC-MS-MS assay. Pharmacokinetic Compartmental models, using actual dosing and sampling times, were built using Phoenix (version 1.2). Model discrimination was performed, by minimizing the Akaike Information Criteria (AIC), maximizing the coefficient of determination (r²) and by comparison of the quality of fit plots. RESULTS: The best structural model to describe scopolamine disposition after INSCOP administration (minimal AIC =907.2) consisted of one compartment for plasma, saliva and urine respectively that were inter-connected with different rate constants. The estimated values of PK parameters were compiled in Table 1. The model fitting exercises revealed a nonlinear PK for scopolamine between plasma and saliva compartments for K21, Vmax and Km. CONCLUSION: PK model for INSCOP was developed and for the first time it satisfactorily predicted the PK of scopolamine in plasma, saliva and urine after INSCOP administration. Using non-linear PK yielded the best structural model to describe scopolamine disposition between plasma and saliva compartments, and inclusion of non-linear PK resulted in a significant improved model fitting. The model can be utilized to predict scopolamine plasma concentration using saliva and/or urine data that allows non-invasive assessment of pharmacotherapeutics of scopolamine in space and other remote environments without requiring blood sampling.

Wu, L.↗

NASA NTRS2015

Directed Research in Bone Discipline: Refining Previous Research Observations for Space Medicine

Dual-energy X-ray absorptiometry bone mass density, as a sole index, is an insufficient surrogate for fracture; Clinical Practice Guidelines using bone mass density (both World Health Organization and FRAX) are not specific for complicated subjects such as young, healthy persons following prolonged exposure to skeletal unloading (i.e. an attribute of spaceflight); Research data suggest that spaceflight induces changes to astronaut bones that could be profound, possibly irreversible and unlike age-related bone loss on Earth.; There is a need to objectively assess factors across human physiology that are also influenced by spaceflight (e.g., muscle) that contribute to fracture risk. Some of these objective assessments may require innovative technologies, analyses and modeling.; Astronauts are also exposed to novel situations that may overload their bones highlighting a need integrate biomechanics of physical activities into risk assessments.; As we accumulate data, which reflects the biomechanical competence of bone under specific mechanically-loaded scenarios (even activities of daily living), BONE expects Bone Fracture Module to be more sensitive and/or have less uncertainty in its assessments of fracture probability.; Fracture probability drives the requirement for countermeasures. Level of evidence will unlikely be obtained; hence, the Bone Research and Clinical Advisory Panel (like a Data Safety Monitoring Board) will provide the recommendations.

Sibonga, Jean D.↗

NASA NTRS2024

Evolution of Spaceflight Renal Stone Risks and Update to the NASA Human Research Program (HRP) Renal Stone Evidence Report and Integrated Concept of Operations

BACKGROUND: The NASA HRP Evidence Report on the Risk of Renal Stone Formation is being updated based on new information obtained from 9 years of data from NASA’s astronaut renal stone surveillance program. In addition, the Concept of Operations for missions beyond Low Earth Orbit (LEO) was created to supplement the Evidence Report, and the NASA clinical practice guideline(CPG)for renal stone surveillance was updated. OVERVIEW: A literature review was performed to evaluate the state of literature regarding renal stone prevention, mitigation, and management both in terrestrial and spaceflight environments. Current renal stone treatment guidelines for the ISS, which were created by the Inflight Clinical Medicine Working Group and approved by the Multilateral Medical Operations Panel (MMOP)were reviewed, as well as recent ultrasound technology demonstrations onboard the ISS. This information was used in conjunction with emerging evidence from the surveillance program to update the Evidence Report and in-flight Concept of Operations. DISCUSSION: There are known and emerging renal stone prevention strategies including astronaut selection, the use of medications and resistive exercise, early diagnosis with regular urine studies and ultrasound imaging. In-flight treatment options include pharmaceuticals, use of lithotripsy and propulsive ultrasound, placement of percutaneous drains and other modalities. This information is useful to gauge future risks and update our strategies for prevention and management of renal stones in astronauts to reduce the risk of in-flight renal stone colic that could cause morbidity and mission impact.

E Stratton↗

DOE OSTI2024

Dynamic Modeling of Near Isothermal Compressor for Transcritical Carbon Dioxide Cycle

Compressors are the major energy consumption components in vapor compression systems, drawing much research effort in reducing carbon emissions. The isothermal compressor integrates the compressor chamber and gas cooler to achieve near isothermal compression, reaching up to 30% energy reduction compared to the traditional isentropic compression work. This paper presents a detailed isothermal compressor model combined with a generalized liquid piston model to account for the carbon dioxide (CO2) isothermal compression process. The model is established based on MATLAB environment. The model uses the real experimental data as boundary conditions and initial settings, which also considers the CO2 solubility in liquid piston (mineral oil) for designing, optimizing and customizing the compression chambers. The validation was carried out with experimental data using a prototype with 3.5 kW capacity. The results have demonstrated the accuracy of the dynamic model (6.2% relative error for chamber pressure and 0.5 K deviation for chamber temperature), which provide a guideline for designing and customizing the isothermal compression cycle.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

Intern Deliverable Poster 2025

An Incident Response Plan (IRP) is a document that is created and maintained by an organization that provides guidance in the event of a cyber incident. The primary objectives of an IRP are to aid in the detection, response, and recovery from incidents, as well as to enhance preparation and preventative measures. An IRP should outline specific procedures at each stage of an incident, with the goal of minimizing asset damage, data leakage, and operational impact. By investing in a well-defined IRP, organizations can better manage and mitigate risks associated with cyber threats, ensuring business continuity and resilience. This poster summarizes incident response guidelines for wind energy, which faces unique cybersecurity and physical challenges.

17 - WIND ENERGY↗

NASA NTRS2014

Scalable Asset Discovery, Vulnerability Scanning, and Penetration Testing for Remote Sites and Wireless Spectrums Utilizing an Embedded Linux Plug - PwniPlug and the Raspberry Pi B+ as a Sample Pen Test

All devices attached to the NASA KSC network are subject to security vulnerability scanning and/or penetration testing. In today's changing environment, vulnerable and/or unprotected systems can easily be overlooked. Systems that are not properly managed can become a potential threat to the operational integrity of our systems and networks. This includes all NASA (internal and external) information systems within NASA KSC Internet Protocol (IP) address space, and NASA KSC facilities. The Office of the Chief Information Officer (OCIO) recommends that all NASA Centers and information systems be subject to penetration testing on a regular interval in accordance with the guidelines identified by the National Institute of Standards and Technology (NIST). (ITS-HBK-2810.04-02A) Protecting information and equipment at NASA is an area of increasing concern. In addition to the CPU's on the network; Supervisory, Control and Data Acquisition (SCADA) systems are especially vulnerable because these systems have lacked standards, use embedded controllers with little computational power and informal software, are connected to physical processes, have few operators, and are increasingly also being connected to corporate networks. The scope of work is comprised of several individual components which together build upon previous work by Drew Branch, NASA KSC Intern. The Pwn Plug is the selected COTS (Commercial-Off-The-Shelf) device chosen to test simplification of mandatory IT Security tasks. The device will be utilized to provide services to NASA KSC and enable an assessment of infrastructure soundness and regulatory compliance in an efficient, economical, and business responsive manner. The Pwn Plug is designed as a pen testing appliance which provides a hardware platform that can support commercial penetration testing efforts at significantly reduced costs. The expected outcomes are: 1) External Penetration Testing, 2) Social Engineering, 3) Procedural Documentation, 4) Recommended Remediation Action Plan, 5) System Retest & Remediation Attestation and 6) Final Reports, out briefing and Presentation. Due to physical and material constraints beyond intern and mentor control, the project was redefined as a working pen-test scenario. Limitations of lab availability and tools dictated an academic exercise. This report was developed within the scenario guidelines suggested by the project mentor. The guidelines were to be creative in developing a Pen Test program for a client.

Penetration Testing↗

DOE OSTI2021

Antimicrobial properties of nanostructured surfaces – demonstrating the need for a standard testing methodology

Bioinspired nanostructured materials that exhibit antimicrobial properties are being synthesized and tested at increasing rates for use in healthcare, manufacturing processes, and diagnostics. Although progress has been made in improving and understanding their bactericidal activity, arguably, the biggest problem currently in the field is the lack of a standard testing methodology that allows for optimal characterization and better comparison of emerging nanostructures. In this work, we examine two forms of nanostructured silicon that vary in their ability to kill certain bacterial species due to different physical mechanisms and derive guidelines for the comparative testing. We perform a comprehensive evaluation of methodologies used extensively in the field (e.g., colony counting and live dead analysis) and the novel application of high-throughput flow cytometry. The data reveal how the techniques are complementary but not always directly equivalent or correlative. Therefore, comparison of results obtained using different methodologies on different materials can be grossly misleading. We report significant variations in bactericidal efficiencies depending on experimental environments (medium type, etc.) and methodologies employed. In addition, we demonstrate how cytometry is yet another powerful complementary tool that can aid the mechanistic understanding of antimicrobial activities of rough surfaces. Besides standardization for comparison, ultimately, evaluation methods need to consider anticipated applications. Then and only then can the true potential (or limitation) of a novel material be determined for its suitability for advancement in a particular field of use.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2025

bmdrc: Python package for quantifying phenotypes from chemical exposures with benchmark dose modeling

Though chemical exposures are known to potentially have negative impacts on health, including contributing to chronic diseases such as cancer, the quantitative contribution of risk is not fully understood for every chemical. A commonly used approach to quantify levels of risk is to measure the proportion of organisms (such as a total number of zebrafish on a plate or mice in a cage) with abnormal behavioral responses or morphology at increasing concentrations of chemical exposure. A particular challenge with processing the proportional data from these assays is the appropriate estimation of chemical concentration levels that result in malformations or acute toxicity, as these values typically vary between experimental measurements. The recommended approach by the Environmental Protection Agency (EPA) is to fit benchmark dose curves with specific filters and model fitting steps, which are crucial to properly processing the proportional data. Several tools exist for the fitting of benchmark dose response curves, but none are standalone Python libraries built to process both morphological and behavioral data as proportions with all the EPA recommended filters, filter parameters, models, and model parameters. Thus, here we present the benchmark dose response curve (bmdrc) Python library, which was built to closely follow these EPA guidelines with helpful visualizations of filters and fitted model curves, and reports for reproducibility purposes. bmdrc is open-source and has demonstrated utility as a support package to an existing web portal for information on chemicals (https://srp.pnnl.gov). Our package will support any toxicology analysis where the response is a proportional value at increasing levels of a concentration of a chemical or chemical mixture.

Superfund↗

DOE OSTI2023

Field Demonstration of the Brick Ontology to Scale up the Deployment of ASHRAE Guideline 36 Control Sequences

Many commercial buildings have a vast network of sensors as part of their building automation systems (BAS) that allows opportunities for energy consumption and cost savings by deploying advanced control sequences. However, this resource is often underutilized since BAS are typically programmed with simple control sequences with limited potential to deliver on these opportunities. The recent availability of ASHRAE Guideline 36 (G36) with advanced HVAC control sequences supports control retrofits in existing buildings to unlock much of the savings potential. However, barriers such as the lack of standard naming convention of building assets and data points, proprietary equipment and BAS, and the inherent uniqueness of buildings and their systems prevent building stakeholders from adopting any “plug-and-play” implementation of G36. Instead, control vendors must often undertake the manual and labor-intensive point mapping process to identify a data stream’s functional and spatial relationship within the HVAC system along with other relevant contexts and map it to the new control sequences. The vendor must carry out the point mapping process in each individual building since the mapping is unlikely to port over to another building. Even for the same building, the point mapping process can occur multiple times if various control vendors implement different control retrofits and/or multiple control retrofits happen over the lifecycle of the building. Then, there is the likelihood that G36 control sequences are programmed uniquely to the building, preventing the same implementation from being reused in another. Therefore, this paper presents a field demonstration of how we leveraged the Brick ontology with BACnet, OpenBuildingControl’s Control Description Language (CDL), and open-source support tools to implement scalable and portable advanced building controls. These tools provide standardized semantic descriptions and relationships of the building’s assets and data points (Brick), standardized communication protocol to read from and write to the building’s BAS (BACnet), and standardized code implementations (CDL) of standardized advanced control strategies (G36). We implemented G36’s hot water supply temperature setpoint reset in a Berkeley, CA building for this field demonstration. This field demonstration aims to show how integrating these tools may streamline the deployment of advanced control sequences such as G36 in a consistent manner regardless of differences found across buildings.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2020

Automated Threat Recognition For Aviation Security Applications

We have developed a framework for automated threat recognition (ATR) of explosive threat materials for both single-energy and dual-energy X-ray CT systems. Under this framework, two different types of ATR have been developed. The first type of ATR employs supervised machine learning with statistical characterization of target materials for threat identification training. The reliance only on statistical characterization information for threat training uniquely enables this style of ATR to adapt quickly to evolving threats. The second type of ATR employs deep learning through convolutional neural networks. Convolutional neural networks are attractive due to their human-like capacity for learning and strong ability to identify trends and patterns. Although this method is more powerful than the first type, it requires large amounts of training data and therefore is less agile. Each ATR performs threat characterization at the voxel neighborhood level. This approach avoids the use of threat shape as a detection criterion, which is prohibited by DHS and TSA guidelines.

97 MATHEMATICS AND COMPUTING↗

NASA NTRS1993

Orbital performance of communication satellite microwave power amplifiers (MPAs)

This paper presents background data on the performance of microwave power amplifiers (MPAs) used as transmitters in currently operating commercial communication satellites. Specifically aspects of two competing MPA types are discussed. These are well known TWTA (travelling wave tube amplifier) and the SSPA (solid state power amplifier). Extensive in-orbit data has been collected from over 2000 MPAs in 1991 and 1993. The study in 1991 invovlved 75 S/C (spacecraft) covering 463 S/C years. The 1993 'second-look' study encompassed a slightly different population of 72 S/C with 497 S/C years of operation. A surprising result of both studies was that SSPAs, although quite reliable, did not achieve the reliability of TWTAs were one-third more reliable in the 1993 study. This was at C-band with comparable power amplifiers, e.g. 6-16W of RF output power and similar gains. Data at K(sub u)-band is for TWTAs only since there are no SSPAs in the current S/C inventory. The other complementary result was that the projected failure rates used as S/C payload design guidelines were, on average, somewhat higher for TWTAs than the actual failure rates uncovered by this study. SSPA rates were as projected.

Strauss, R.↗

NASA NTRS2004

Handbook for Using IP Protocols for Space Missions

This presentation will provide a summary of a handbook developed at GSFC last year that contains concepts and guidelines for using Internet protocols for space missions. It will include topics on: Lessons learned from current Space IP mission. General architectural issues related to use of IP in space. Operational scenarios for common space data transfer applications. Security issues. A general review of protocols applicable for use with IP in space. The presentation will also pose questions on what sort of information would be useful in future versions of the document.

Hogie, Keith↗

NASA NTRS2014

A Population Pharmacokinetic Model for Disposition in Plasma, Saliva and Urine of Scopolamine after Intranasal Administration to Healthy Human Subjects

An intranasal gel formulation of scopolamine (INSCOP) was developed for the treatment of Space Motion Sickness. The bioavailability and pharmacokinetics (PK) were evaluated under the Food and Drug Administration guidelines for clinical trials with an Investigative New Drug (IND) protocol. The aim of this project was to develop a PK model that can predict the relationship between plasma, saliva and urinary scopolamine concentrations using data collected from the IND clinical trials with INSCOP. Methods: Twelve healthy human subjects were administered three dose levels (0.1, 0.2 and 0.4 mg) of INSCOP. Serial blood, saliva and urine samples were collected between 5 min and 24 h after dosing and scopolamine concentrations were measured by using a validated LC‐MS‐MS assay. Pharmacokinetic Compartmental models, using actual dosing and sampling times, were built using Phoenix (version 1.2). Model selection was based on the likelihood ratio test on the difference of criteria (‐2LL) and comparison of the quality of fit plots. Results: The best structural model for INSCOP (minimal ‐2LL= 502.8) was established. It consisted of one compartment each for plasma, saliva and urine, respectively, which were connected with linear transport processes except the nonlinear PK process from plasma to saliva compartment. The best‐fit estimates of PK parameters from individual PK compartmental analysis and Population PK model analysis were shown in Tables 1 and 2, respectively. Conclusion: A population PK model that could predict population and individual PK of scopolamine in plasma, saliva and urine after dosing was developed and validated. Incorporating a non‐linear transfer from plasma to saliva compartments resulted in a significantly improved model fitting. The model could be used to predict scopolamine plasma concentrations from salivary and urinary drug levels, allowing non‐invasive therapeutic monitoring of scopolamine in space and other remote environments.

Wu, L.↗

NASA NTRS2016

Historical Mass, Power, Schedule, and Cost Growth for NASA Spacecraft

Although spacecraft developers have been moving towards standardized product lines as the aerospace industry has matured, NASA's continual need to push the cutting edge of science to accomplish unique, challenging missions can still lead to spacecraft resource growth over time. This paper assesses historical mass, power, cost, and schedule growth for multiple NASA spacecraft from the last twenty years and compares to industry reserve guidelines to understand where the guidelines may fall short. Growth is assessed from project start to launch, from the time of the preliminary design review (PDR) to launch and from the time of the critical design review (CDR) to launch. Data is also assessed not just at the spacecraft bus level, but also at the subsystem level wherever possible, to help obtain further insight into possible drivers of growth. Potential recommendations to minimize spacecraft mass, power, cost, and schedule growth for future missions are also discussed.

Schedule↗

NASA NTRS2022

NASA's Responsible AI Plan

Artificial Intelligence (AI) is an integral part of today’s process of conducting science and technology development. At NASA, AI has become an integral and important tool for researchers, engineers, data scientists, and technologists in pursuing the ground-breaking discoveries that we are known for, including the command and controlling of our spacecraft and other supporting infrastructures. Consequently, research and engineering efforts incorporating AI have permeated almost every area of our work. It is contributing to NASA’s drive toward the future, not just of space science, but for society here at home. We are dedicated to continuing the use of AI in a safe and fully transparent approach so that the public can have high confidence in the outcomes and benefits. We believe that the plan outlined here will be responsive and contribute to the call for openness across the federal government. NASA is committed to responsible use of AI in all of its activities and in all phases of development and deployment of its space and terrestrial programs missions. NASA does not deliberately focus on “AI Research” as a separate field (we have no single “AI office” or “AI program”), rather NASA uses AI to build tools for its programs. This plan, being put forward, adheres to the Responsible AI (RAI) principles set and laid down by the White House in its Presidential Executive Order 13960. Our research, engineering and technical communities have been made aware of these guidelines and we are committed to an on-going process of educating and monitoring its implementation to ensure adherence to those principles. The vast majority of NASA’s use cases, which number almost 75 today, are geared toward analyzing the petabytes of data that NASA collects from its fleet of spacecraft across all disciplines, in human space exploration, and in aeronautics, etc.

Artificial Intelligence↗

DOE OSTI2021

Land Surface Temperature from GOES-East and GOES-West

Land surface temperature (LST) is an important climate parameter that controls the surface energy budget. For climate applications, information is needed at the global scale with representation of the diurnal cycle. To achieve global coverage there is a need to merge about five independent geostationary (GEO) satellites that have different observing capabilities. An issue of practical importance is the merging of independent satellite observations in areas of overlap. An optimal approach in such areas could eliminate the need for redundant computations by differently viewing satellites. We use a previously developed approach to derive information on LST from GOES-East (GOES-E), modify it for application to GOES-West (GOES-W) and implement it simultaneously across areas of overlap at 5-km spatial resolution. We evaluate the GOES-based LST against in situ observations and an independent MODIS product for the period of 2004–09. The methodology proposed minimizes differences between satellites in areas of overlap. The mean and median values of the differences in monthly mean LST retrieved from GOES-E and GOES-W at 0600 UTC for July are 0.01 and 0.11 K, respectively. Similarly, at 1800 UTC the respective mean and median value of the differences were 0.15 and 1.33 K. These findings can provide guidelines for potential users to decide whether the reported accuracy based on one satellite alone, meets their needs in area of overlap. Since the 6 yr record of LST was produced at hourly time scale, the data are well suited to address scientific issues that require the representation of LST diurnal cycle or the diurnal temperature range (DTR).

54 ENVIRONMENTAL SCIENCES↗