Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NATURAL CONVECTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Heat transfer from an internal combustion (Otto-cycle) engine on the surface of Mars

The cooling requirements for an average car sized engine (spark-ignition, V-6, four-stroke, naturally aspirated, about 200 kg, about 100 kW) were looked at for Mars. Several modes of cooling were considered, including forced convection, exhaust, radiation and closed loop systems. The primary goal was to determine the effect of the thinner Martian atmosphere on the cooling system. The results show that there was only a 6-percent difference in the cooling requirements. This difference was due mostly to the thinner atmosphere during forced convection and the heat capacity of the exhaust. A method using a single pass counter-flow heat exchanger is suggested to offset this difference in cooling requirements.

Gwynne, Owen↗
NASA NTRS1998

Orbital Processing of Eutectic Rod-Like Arrays

The eutectic is one of only three solidification classes that exist. The others are isostructural and peritectic-class reactions, respectively. Simplistically, in a binaryeutectic phase diagram, a single liquid phase isothermally decomposes to two solid phases in a cooperative manner. The melting point minimum at the eutectic composition, isothermal solidification temperature, near-isocompositional solidification and refined solidification microstructure lend themselves naturally to such applications as brazing and soldering; industries that eutectic alloys dominate. Interest in direct process control of microstructures has led, more recently, to in-situ eutectic directional solidification with applications in electro-magnetics and electro-optics. In these cases, controlled structural refinement and the high aspect ratio and regularity of the distributed eutectic phases is highly significant to the fabrication and application of these in-situ natural composites. The natural pattern formation and scaling of the dispersed phase on a sub-micron scale has enormous potential application, since fabricating bulk materials on this scale mechanically has proven to be particularly difficult. It is thus of obvious importance to understand the solidification of eutectic materials since they are of great commercial significance. The dominant theory that describes eutectic solidification was derived for diffusion-controlled growth of alloys where both solid eutectic phases solidify metallically, i.e. without faceting at the solidification interface. Both high volume fraction (lamellar) and low volume fraction (rod-like) regular metallic arrays are treated by this theory. Many of the useful solders and brazements, however, and most of the regular in-situ composites are characterized by solidification reactions that are faceted/non-faceted in nature, rather than doubly non-faceted (metallic). Further, diffusion-controlled growth conditions are atypical terrestrially since gravitationally-driven convection is pervasive. As a consequence, it is important to determine whether these faceted/non-faceted composites behave in the same manner as their doubly non-faceted counterparts, particularly in the presence of convection. Prior analytical convective sensitivity testing of this theory predicted insensitivity. Prior experimental testing of this theory offered broad-based agreement between theory and experiment, though most results were for high volume fraction lamellar eutectics that solidified without faceting at the solidification interface. Directional solidification experiments of low volume fraction rod eutectics under damped (microgravity or magnetic field) conditions, however, have demonstrated significant sensitivity, challenging this fundamental theory. More recent theories have been proposed which introduce kinetic undercooling, faceting, fluid shear of the solute redistribution zone and the possibility that the interface composition is not the same as the bulk liquid composition. This program tests the established and proposed analytical theories and addresses the origins of discrepancies between the experimental and analytical results.

Larson, David J., Jr.↗
NASA NTRS1998

Photonic and Opto-Electronic Applications of Polydiacetylene Films Photodeposited from Solution and Polydiacetylene Copolymer Networks

Polydiacetylenes (PDAS) are attractive materials for both electronic and photonic applications because of their highly conjugated electronic structures. They have been investigated for applications as both one-dimensional (linear chain) conductors and nonlinear optical (NLO) materials. One of the chief limitations to the use of PDAs has been the inability to readily process them into useful forms such as films and fibers. In our laboratory we have developed a novel process for obtaining amorphous films of a PDA derived from 2-methyl4-nitroaniline using photodeposition with Ultraviolet (UV) light from monomer solutions onto transparent substrates. Photodeposition from solution provides a simple technique for obtaining PDA films in any desired pattern with good optical quality. This technique has been used to produce PDA films that show potential for optical applications such as holographic memory storage and optical limiting, as well as third-order NLO applications such as all-optical refractive index modulation, phase modulation and switching. Additionally, copolymerization of diacetylenes with other monomers such as methacrylates provides a means to obtain materials with good processibility. Such copolymers can be spin cast to form films, or drawn by either melt or solution extrusion into fibers. These films or fibers can then be irradiated with UV to photopolymerize the diacetylene units to form a highly stable cross-linked PDA-copolymer network. If such films are electrically poled while being irradiated, they can achieve the asymmetry necessary for second-order NLO applications such as electro-optic switching. On Earth, formation of PDAs by the above mentioned techniques suffers from defects and inhomogeneities caused by convective flows that can arise during processing. By studying the formation of these materials in the reduced-convection, diffusion-controlled environment of space we hope to better understand the factors that affect their processing, and thereby, their nature and properties. Ultimately it may even be feasible to conduct space processing of PDAs for technological applications.

Paley, Mark S.↗
NASA NTRS2003

Droplet Combustion in a Slow Convective Flow

The influences of slow convective flow on droplet combustion, particularly in the low Reynolds number regime, have received very little attention in the past. Most studies in the literature are semi-empirical in nature and they were motivated by spray combustion applications in the moderate to high Reynolds number regime. None of the limited number of fundamental theoretical studies applicable to low Reynolds numbers have been verified by rigorous experimental data. Moreover, many unsteady phenomena associated with fluid-dynamic unsteadiness, such as impulsive starting or stopping of a burning droplet, or flow acceleration/deceleration effects, have not been investigated despite their importance in practical applications. In this study we investigate the effects of slow convection on droplet burning dynamics both experimentally and theoretically. The experimental portion of the study involves both ground-based experiments in the drop towers and future flight experiments on board the International Space Station. Heptane and methanol are used as test fuels, and this choice complements the quiescent-environment studies of the Droplet Combustion Experiment (DCE). An analytical model that employs the method of matched asymptotic expansions and uses the ratio of the convective velocity far from the droplet to the Stefan velocity at its surface as the small parameter for expansion has also been developed as a part of this investigation. Results from the ground-based experiments and comparison with the analytical model are presented in this report.

Nayagam, V.↗
NASA NTRS1998

Physics of Boundaries and Their Interactions in Space Plasmas

This report describes the work done by SciberNet, Inc. during the month of January. During this time, we primarily worked on further analysis of the results presented at the AGU as well as writing them up for publication. Using large scale simulations, we showed that the magnetopause during the southward IMF case is quite irregular with varying thickness, and has a complex flow pattern owing to the nonlinear effects of the convective flow superimposed on the flows generated in the reconnection layer. We used inflow-outflow boundary conditions to examine the kinetic nature of the discontinuities that are formed in the reconnection layer and concluded that nonlocal effects play a major role in the formation of such discontinuities and can alter their properties from the usual structures expected from 1-D simulations or from fluid theories. Finally, we used our 3-D simulations to examine the nonlinear interaction of the tearing mode with the Kelvin-Helmholtz instability. We showed that this interaction leads to the generation of a large core field which is observed both in the magnetotail as well as the magnetopause.

Omidi, Nojan↗
NASA NTRSDate not supplied

Exploring the Continuum of Stratiform and Cumulus Cloudiness: Observational Insights Related to Marine Boundary Layer Clouds

Low-level marine clouds take on a wide range of morphological states owing to external forcing and internal feedbacks. Rarely are shallow marine clouds adequately described by a single simplified framework but instead exhibit features that partially conform to several states that could be considered “limiting”. Perhaps the most apparent dichotomy is whether to consider shallow clouds as existing within a surface-driven mixed layer or as convective “plume” elements positioned on top. Do the rules that govern the limiting cases transition smoothly through the hybrid scenarios found in nature, or are there particular regions of attraction or repulsion?We have identified 3 ”axes” along which to investigate how the energetics, thermodynamics and cloud macro structure relate to the intermediate spaces between idealizations.

Ewan Crosbie↗
NASA NTRS1999

Laminar Dust Flames: A Program of Microgravity and Ground Based Studies at McGill

Fundamental knowledge of heterogeneous combustion mechanisms is required to improve utilization of solid fuels (e.g. coal), safe handling of combustible dusts in industry, and solid propulsion systems. The objective of the McGill University research program on dust combustion is to obtain a reliable set of data on basic combustion parameters for dust suspensions (i.e. laminar burning velocity, flame structure, quenching distance, flammability limits, etc.) over a range of particle sizes, dust concentrations, and types of fuel. This set of data then permits theoretical models to be validated and, when necessary, new models to be developed to describe the detailed reaction mechanisms and transport processes. Microgravity is essential to the generation of a uniform dust suspension of arbitrary particle size and concentration. When particles with a characteristic size on the order of tens of microns are suspended, they rapidly settle in a gravitational field. To maintain a particulate in suspension for time duration adequate to carry out combustion experiments invariably requires continuous convective flow in excess of the gravitational settling velocity (which is comparable with and can even exceed the dust laminar burning velocity). This makes the experiments turbulent in nature and thus renders it impossible to study laminar dust flames. Even for small particle sizes on the order of microns, a stable laminar dust flow can be maintained only for relatively low dust concentrations at normal gravity conditions. High dust loading leads to gravitational instability of the dust cloud and to the formation of recirculation cells in the dust suspension in a confined volume, or to the rapid sedimentation of the dense dust cloud, as a whole, in an unconfined volume. Many important solid fuels such as carbon and boron also have low laminar flame speeds (of the order of several centimeters per second). Convection that occurs in combustion products due to buoyancy disrupts the low speed dust flames and makes observation of such flames at normal gravity difficult.

Goroshin, Sam↗
NASA NTRS1999

Temperature Variability Associated with the Middle Atmosphere Electrodynamics (MAE-1) Campaign

Meteorological rockets launched during the Middle Atmosphere Electrodynamics (MAE-1) Campaign in October 1980 from Andoya Rocket Range (ARR), Norway, exhibited large and unexpected temperature variability. Temperatures were found to vary as much as 20 C within a few hours and demonstrated a similar type of variability from one day to the next. Following examination of the reduced rocketsonde profiles the question was raised whether the observed variability was due to natural atmospheric variability or instrument malfunction. Small-scale variability, as observed, may result from one or multiple sources, e.g., intense storms upstream from the observing site, orography such as mountain waves off of the Greenland Plateau, convective activity, gravity waves, etc. Arranging the observations spaced over time showed that the perturbations moved downward. Prior to MAE-1 very few small rocketsonde measurements had been launched from ARR, thus the quality of the initial measurements in early October caused concern when the large variability was noted. We discuss the errors of the rocketsonde measurements, graphically review the nature of the variability observed, compare the data with other measurements, and postulate a possible cause for the variability.

Schmidlin, F. J.↗
DOE OSTI2025

Direct observations of transient weakening during phase transformations in quartz and olivine

Phase transformations are widely invoked as a source of rheological weakening during subduction, continental collision, mantle convection and various other geodynamic phenomena. However, despite more than half a century of research, the likelihood and magnitude of such weakening in nature remain poorly constrained. Here we use experiments performed on a synchrotron beamline to reveal transient weakening of up to three orders of magnitude during the polymorphic quartz to coesite (SiO 2 ) and olivine to ringwoodite (Fe 2 SiO 4 ) phase transitions. Weakening becomes increasingly prominent as the transformation outpaces deformation. We suggest that this behaviour is broadly applicable among silicate minerals undergoing first-order phase transitions and examine the likelihood of weakening due to the olivine-spinel, (Mg,Fe) 2 SiO 4 , transformation during subduction. Modelling suggests that cold, wet slabs are most susceptible to transformational weakening, consistent with geophysical observations of slab stagnation in the mantle transition zone beneath the western Pacific. In conclusion, our study highlights the importance of incorporating transformational weakening into geodynamic simulations and provides a quantitative basis for doing so.

Cross, Andrew J. [Woods Hole Oceanographic Institu↗
NASA NTRS1996

Ignition Delay Associated with a Strained Strip

Ignition processes associated with two adjacent fuel-oxidizer interferences bounding a strained fuel strip are explored here using single-step activation energy asymptotics. Calculations are made for constant as well as temporally decaying strain fields. There possible models of ignition are determined: one in which the two interfaces ignite independently as diffusion flames; one in which the two interfaces ignite dependently and in which ignition occurs to form a single , premixed flame at very high strain rates before ignition is completely prevented. In contrast to a single, isolated interface in which ignition can be prevented by overmatching heat production with heat convection due to strain, ignition of a strained fuel strip can also be prevented if the finite extend of fuel is diluted by oxidizer more quickly than heat production can cause a positive feedback thermal runaway. These behaviors are dependent on the relative sizes of timescales associated with species and heat diffusion, with convection due to strain, and with the chemical reaction. The result here indicate that adjacent, strained species interfaces may ignite quite differently in nature from ignition of a single, strained intrface and that their interdependence should be considered as the interfaces are brought closer together in complex strain fields. Critical strain rates leading to complete ignition delay are found to be considerably smaller for the fuel strip than those for single interfaces as the fuel strip is made thin in comparison to diffusion and chemical length scales.

Gerk, T. J.↗
NASA NTRSDate not supplied

History of NASA Global Lightning Observations

Why does NASA study lightning from space? • Lightning is a natural hazard - threatening lives, damaging infrastructure, causing wildfires, and posing a risk to NASA rocket launches. • Lightning is related to processes within deep convection, and by studying lightning we learn more about how storms impact Earth’s weather and climate. • Lightning produces nitrogen oxides, which modulate ozone levels in the atmosphere. These gases are important for biogeochemical cycles and Earth’s climate. • Lightning affects regions beyond Earth’s troposphere and occurs on other planets.

Timothy Lang↗
NASA NTRS1986

The dependence of He I 10830 A absorption strength upon X-ray emission in late-type stars

Measurements of He I 10830 A absorption equivalent widths and fractional X-ray luminosities L(x)/L(bo) are presented for a large sample of late-type stars. A correlation of increasing 10830 A strength with increasing L(x)/L(bo) is evident in dwarfs, giants, and supergiants later than and including spectral type F7. No equivalent correlation is apparent in main-sequence stars earlier than dF7 (B-V of about 0.5). The data suggest that coronal X-ray irradiation constitutes an important source of He I excitation in late-type stars. The fact that X-ray luminosity depends exponentially on 10830 A equivalent width is attributed to the production of X-rays in active regions covering only a fraction of the stellar surface. It is conjectured that the absence of 10830 A X-ray correlation in early dF stars is due to the increased importance of electron collisional excitation of He I. This effect is discussed in light of evidence that the nature of magnetic activity changes significantly across the color range spanned by dF stars; a change related directly to the increasing depth of stellar convection with decreasing effective temperature.

Zarro, D. M.↗
NASA NTRS2001

Transport of Photoelectrons in the Nightside Magnetosphere

Kinetic modeling results are analyzed to examine the transport of photoelectrons through the nightside inner magnetosphere. A natural filter exists on the nightside for these particles, with Coulomb collisions eroding the distribution at low energies and low L shells, and magnetospheric convection compressing the flux tubes as they corotate towards dawn. This leads to an electron population with very distinctive features. It is shown that, for low activity levels, a band of photoelectrons forms between L=4 and 6 that extends throughout the nightside local times and into the morning sector. Modeled energy and pitch angle distributions are presented to show the development and features of this electron band, as well as their influences on the thermal plasma. Such a population should be observable in satellite spectrometer measurements.

Khazanov, G. V.↗
NASA NTRS2001

Transport of Photoelectrons in the Nightside Magnetosphere

Kinetic modeling results are analyzed to examine the transport of photoelectrons through the nightside inner magnetosphere. Two sources are considered, those on the dayside from direct solar illumination, and those at all local times from light scattered by the upper atmosphere and geocorona. For the dayside photoelectrons, a natural filter exists oil the nightside for these particles, with Coulomb collisions eroding the distribution at low energies and low L shells, and magnetospheric convection compressing the flux tubes as they corotate towards dawn. It is shown that, for low activity levels, a band of photoelectrons forms between L=4 and 6 that extends throughout the nightside local times and into the morning sector. For the scattered light photoelectrons, the trapped zone throughout the nightside is filled for energies less than 30 eV. Convective compression on the nightside and expansion on the dayside yields an accelerated population up to 50 eV at high L shells around dawn. Modeled energy and pitch angle distributions are presented to show the development and features of these populations. Such distinctive features should be observable in satellite spectrometer measurements.

Khazanov, G. V.↗
NASA NTRS2002

Transport of Photoelectrons in the Nightside Magnetosphere

Kinetic modeling results are analyzed to examine the transport of photoelectrons through the nightside inner magnetosphere. Two sources are considered, those on the dayside from direct solar illumination and those across the nightside from light scattered by the upper atmosphere and geocorona. A natural filter exists on the nightside for the dayside photoelectrons. Coulomb collisions erode the distribution at low energies and low L shells, and magnetospheric convection compresses the electrons as they drift toward dawn. It is shown that for low-activity levels a band of photoelectrons forms between L = 4 and 6 that extends throughout the nightside local times and into the morning sector. For the scattered light photoelectrons the trapped zone throughout the nightside is populated with electrons of E less than 30 eV. At high L shells near dawn, convective compression on the nightside yields an accelerated population with electrons at energies up to twice the ionospheric energy maximum (that is, roughly 1200 eV for dayside photoelectrons and 60 eV for scattered light electrons). Modeled energy and pitch angle distributions are presented to show the features of these populations.

Khazanov, G. V.↗
NASA NTRS2005

Planetary Geophysics and Tectonics

The broad objective of this work is to improve understanding of the internal structures and thermal and stress histories of the solid planets by combining results from analytical and computational modeling, and geophysical data analysis of gravity, topography and tectonic surface structures. During the past year we performed two quite independent studies in the attempt to explain the Mariner 10 magnetic observations of Mercury. In the first we revisited the possibility of crustal remanence by studying the conditions under which one could break symmetry inherent in Runcorn's model of a uniformly magnetized shell to produce a remanent signal with a dipolar form. In the second we applied a thin shell dynamo model to evaluate the range of intensity/structure for which such a planetary configuration can produce a dipole field consistent with Mariner 10 results. In the next full proposal cycle we will: (1) develop numerical and analytical and models of thin shell dynamos to address the possible nature of Mercury s present-day magnetic field and the demise of Mars magnetic field; (2) study the effect of degree-1 mantle convection on a core dynamo as relevant to the early magnetic field of Mars; (3) develop models of how the deep mantles of terrestrial planets are perturbed by large impacts and address the consequences for mantle evolution; (4) study the structure, compensation, state of stress, and viscous relaxation of lunar basins, and address implications for the Moon s state of stress and thermal history by modeling and gravity/topography analysis; and (5) use a three-dimensional viscous relaxation model for a planet with generalized vertical viscosity distribution to study the degree-two components of the Moon's topography and gravity fields to constrain the primordial stress state and spatial heterogeneity of the crust and mantle.

Zuber, Maria↗
DOE OSTI2023

Hypersonic Fluid–Structure Interaction on a Cone–Slice–Ramp Geometry

In this study, fluid–structure interactions were measured between a representative control surface and the hypersonic flow deflected by it. The control surface is simplified as a spanwise finite ramp placed on a longitudinal slice of a cone. The front surface of the ramp contains a thin panel designed to respond to the unsteady fluid loading arising from the shock-wave/boundary-layer interactions. Experiments were conducted at Mach 5 and Mach 8 with ramps of different angles. High-speed schlieren captured the unsteady flow dynamics and accelerometers behind the thin panel measured its structural response. Panel vibrations were dominated by natural modes that were excited by the broadband aerodynamic fluctuations arising in the flowfield. However, increased structural response was observed in two distinct flow regimes: 1) attached or small separation interactions, where the transitional regime induced the strongest panel fluctuations. This was in agreement with the observation of increased convective undulations or bulges in the separation shock generated by the passage of turbulent spots, and 2) large separated interactions, where shear layer flapping in the laminar regime produced strong panel response at the flapping frequency. In addition, panel heating during the experiment caused a downward shift in its natural mode frequencies.

33 ADVANCED PROPULSION SYSTEMS↗