Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Magnetic pressure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

LaFeSi–LaFe 13-x Si x composites: Modulating magnetic and magnetocaloric properties through inherent stress manipulation

We examine structural and magnetic properties of a series of La–Fe–Si alloys in the region of concentrations where they naturally form two-phase LaFeSi–LaFe 13-x Si x composites with variable content and connectivity of LaFe 13-x Si x grains distributed within the LaFeSi matrix. Theoretical calculations confirm that the LaFeSi constituent is magnetically and structurally inert below room temperature and at pressures between -10 and 10 GPa. The LaFe 13-x Si x constituent, on the other hand, is magnetically and structurally active: it exhibits first-order magnetostructural transformations that, in addition to x Si , can be controlled with temperature, magnetic field, and pressure. In composites where the concentration of the inactive constituent is ~70 wt. % or greater, the standard, single-step, LaFe 13-x Si x first-order phase transformation proceeds in two steps separated by over 30 K in a zero magnetic field. Increasing the magnetic field recouples the two steps and restores the single-step phase transformation pathway. We analyze the roles of stresses caused by both thermal expansion mismatch and the first-order magnetic phase transition in LaFe 13-x Si x to rationalize the observed physical behaviors that emerge as the temperature or/and magnetic field vary.

36 MATERIALS SCIENCE↗
NASA NTRS1998

Can Kelvin-Helmholtz Instabilities of Jet-Like Structures and Plumes Cause Solar Wind Fluctuations at 1AU

During its south polar passage in 1994, Ulysses sampled the solar wind emerging from the south polar coronal hole. In analysing these data two types of density fluctuations lasting a few hours have been reported, one characterized by fluctuations in velocity gradients ("microstreams") and the other by magnetic plus thermal-pressure balance structures ("PBS"). Microstreams were both temporal and spatial in nature. At higher frequencies, MHD turbulence was observed and found to be less evolved than in the ecliptic, but essentially independent of heliographic latitude. It is argued here that microstreams, PBS, and MHD turbulence could all be the remnant of shears associated with plumes and other filamentary structures ("jets") which have been reported to exist in coronal holes. The shear between a jet and its ambient can become unstable to the MHD Kelvin-Helmholtz ("KH') instability at 5-10 solar radius and the propagating instability can cause fluctuations like those seen by Ulysses. This motivates us to simulate coronal jets using a 3D MHD ZEUS code. The first 2D results have just started to come and are promising. To study the KH instability the jet is perturbed at the boundary with a linear amplitude and fixed frequency. The jet seems to pass through various distinct phases, one of which Is apparently dominated by KH instabilities. These instabilities drive oblique shocks into the jet as the turbulent eddies contact the jet surface. It is known that KH instabilities and internal shock waves are partially suppressed by magnetic field tension. Hence, in simulating far along the jet the Instability is expected to produce Alfvenic fluctuations like those seen near 1 AU.

Parhi, Shyamsundar↗
NASA NTRS1979

Magnetic Cepheids

The role of a magnetic field in the pulsational behavior of classical Cepheids has been studied by computing linearized models of pulsating stellar envelopes pervaded by a well-tangled magnetic field. It is found that the 'pulsational' masses of Cepheids that are implied by the theoretical values of the quantities Q(0), P(1)/P(0), and (possibly) P(2)/P(0) can be brought into line with the large 'evolutionary' masses, if the pressure due to the postulated magnetic field is assumed to be comparable to the thermodynamic pressure everywhere in the pulsating layers. The field strengths that are required - several hundred gauss at the surface and several ten thousand gauss at the base - are quite reasonable from the point of view of the observed magnetic fields in Cepheids. The influence of the magnetic field on the location of the blue edge of the instability strip in the H-R diagram is estimated to be very slight.

Stothers, R.↗
NASA NTRS1983

Doubly diffusive magnetic buoyancy instability in the solar interior

An investigation of the buoyancy of diffuse magnetic fields has shown that in the presence of rotation, static equilibrium configurations of the toroidal magnetic field and ambient plasma can exist. In that case, the escape of toroidal magnetic flux from the solar interior may be determined by the growth of instabilities which the equilibrium configuration may be subject to. In connection with the present investigation, it is assumed that in the region of toroidal magnetic flux amplification, the magnetic field has not as yet filamented into flux ropes, and is therefore 'diffuse'. A study is conducted of the MHD stability of an electrically conducting and differentially rotating gas in the presence of a toroidal magnetic field, an external constant gravitational field, and radiance pressure. The full dispersion relation for the magnetic buoyancy problem is developed, and the solutions of the dispersion relation are discussed.

Schmitt, J. H. M. M.↗
NASA NTRS1989

The effect of ballooning modes on thermal transport and magnetic field diffusion in the solar corona

Presently favored mechanisms of coronal heating (current sheet dissipation and Alfven wave resonant heating) deposit heat in thin layers. Classical thermal conduction cannot explain how heat is transported across the magnetic field. If heating occurs in thin layers, large pressure gradients can be created which can give rise to ballooning modes. These instabilities are caused by the pressure gradient and the curvature of the magnetic field, and are stabilized by magnetic tension. The modes are broad band in wavelength and should produce turbulence. A mixing length expression for the turbulent heat transport shows that it is more than adequate to rapidly convect heat into much broader layers. Furthermore, the turbulent resistivity implies that heating occurs over most of the width of these broadened layers. The broadening also implies that much shorter time scales are required for heating. The beta values in the corona suggest that 1-10 turbulent layers are formed in typical loop or arch structures.

Strauss, H. R.↗
DOE OSTI2023

Topological Hall effect in CeAlGe

The Weyl semimetal CeAlGe is a promising material to study nontrivial topologies in real and momentum space due to the presence of a topological magnetic phase. Our results at ambient pressure show that the electronic properties of CeAlGe are extremely sensitive to small stoichiometric variations. In particular, the topological Hall effect (THE) present in CeAlGe is absent in some samples of almost identical chemical composition. The application of external pressure favors the antiferromagnetic ground state. It also induces a THE where it was not visible at ambient pressure. Furthermore, a small pressure is sufficient to drive the single region of the THE in magnetic fields into two different ones. Our results reveal an extreme sensitivity of the electronic properties of CeAlGe to tiny changes in its chemical composition, leading to a high tunability by external stimuli. We can relate this sensitivity to a shift in the Fermi level and to domain walls.

36 MATERIALS SCIENCE↗
NASA NTRS1991

Fiber optic and laser sensors VIII; Proceedings of the Meeting, San Jose, CA, Sept. 17-19, 1990

This issue presents topics on the advances in fiber-optic sensor technology, fiber-optic gyroscope, fiber-optic position and pressure sensors, fiber-optic magnetic and temperature sensors, and generic fiber-optic sensors. Papers included are on a novel analog phase tracker for interferometric fiber-optic sensor applications, recent development status of fiber-optic sensors in China, the magnetic-field sensitivity of depolarized fiber-optic gyros, a depolarized fiber-optic gyro for future tactical applications, fiber-optic position transducers for aircraft controls, and a metal embedded optical-fiber pressure sensor. Attention is also given to a fiber-optic magnetic field sensor using spectral modulation encoding, a bare-fiber temperature sensor, an interferometric fiber-optic accelerometer, improvement of specular reflection pyrometer, a theoretical analysis of two-mode elliptical-core optical fiber sensors, and a fiber probe for ring pattern.

Depaula, Ramon P.↗
DOE OSTI2025

N‐Heterocyclic Carbene Functionalization of 2D Transition Metal Dichalcogenides via a Frustrated Lewis Pair Strategy

Molecular functionalization of 2D transition metal dichalcogenides (TMDs), which unites tailorability of organic molecules and robustness of inorganic solids, is important for tuning their surface properties. While it is common to leverage the electronic effect of organic ligands to functionalize TMDs, the corresponding steric hinderance has remained elusive and underexplored. Herein N‐heterocyclic carbene (NHC) functionalization of WS 2 is demonstrated via a frustrated Lewis pair (FLP) route, which exploits both the electronic and steric effect for TMD functionalization. The Lewis base, 1,3‐bis(2,4,6‐trimethylphenyl)imidazol‐2‐ylidene (IMes), is anchored to the sulfur vacancy sites (Lewis acid) of the WS 2 nanostructures with the hybrid‐interface‐mediated steric hinderance, mimicking the FLP chemistry and enabling dihydrogen cleavage at room temperature and atmospheric pressure. Solid‐state nuclear magnetic resonance (ssNMR) results reveal the local chemical environment of the activated hydrogen species, which can be transferred for room‐temperature hydrogenation reactions. Finally, the insights are useful for designing weak, non‐covalent bonds to modify the 2D surface of TMDs for a broad scope of applications.

2D materials↗
DOE OSTI2022

Pressure-Driven Changes in the Electronic Bonding Environment of GeO 2 Glass above Megabar Pressures

Noncrystalline oxides under pressure undergo gradual structural modifications, highlighted by the formation of a dense noncrystalline network topology. The nature of the densified networks and their electronic structures at high pressures may account for the mechanical hardening and the anomalous changes in electromagnetic properties. Despite its importance, direct probing of the electronic structures in amorphous oxides under compression above the Mbar pressure (>100 GPa) is currently lacking. Here, we report the observation of pressure-driven changes in electronic configurations and their delocalization around oxygen in glasses using inelastic X-ray scattering spectroscopy (IXS). In particular, the first O K-edge IXS spectra for compressed GeO 2 glass up to 148 GPa, the highest pressure ever reached in an experimental study of GeO 2 glass, reveal that the glass densification results from a progressive increase of oxygen proximity. While the triply coordinated oxygen [3] O is dominant below ~50 GPa, the IXS spectra resolve multiple edge features that are unique to topologically disordered [4] O upon densification above 55 GPa. Topological compaction in GeO 2 glass above 100 GPa results in pronounced electronic delocalization, revealing the contribution from Ge d-orbitals to oxide densification. Strong correlations between the glass density and the electronic configurations beyond the Mbar conditions highlight the electronic origins of densification of heavy-metal-bearing oxide glasses. Furthermore, current experimental breakthroughs shed light on the direct probing of the electronic density of states in high-Z oxides above 1 Mbar, offering prospects for studies on the pressure-driven changes in magnetism, superconductivity, and electronic transport properties in heavy-metal-bearing oxides under compression.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Dual nature of magnetism driven by momentum dependent f-d Kondo hybridization

The intricate nature of magnetism in uranium-based Kondo lattices is a consequence of correlations between U-5 f and conduction electrons. Previously, the source of magnetism has been ascribed to either Mott physics or Ruderman-Kittel-Kasuya-Yosida interaction, both of which are not fully applicable to uranium-based Kondo lattices. Using linearized quasiparticle self-consistent GW plus dynamical mean-field theory, we demonstrate a crossover from incoherent to coherent f - d Kondo cloud in the paramagnetic phase of UTe 2 , USbTe and USbSe. As the transition occurs, we observe an augmented f - d coherence and Pauli-like magnetic susceptibility, with a substantial frozen magnetic moment of U-5 f persisting. We show that momentum dependent f - d hybridization is responsible for the magnetic moments arising from the renormalized f electrons’ van Hove singularity. Our findings provide a perspective to explain the dual nature of magnetism and the long-range magnetic ordering induced by pressure in UTe 2 .

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Solving the problem of overdetermination of quasisymmetric equilibrium solutions by near-axis expansions. II. Circular axis stellarator solutions

Here we apply the near-axis expansion method for quasisymmetric magnetic fields with anisotropic pressure to construct numerical solutions to circular axis stellarators. The solutions are found to second order in the distance from the axis, not possible in the standard Garren–Boozer construction, which assumes magnetostatic equilibria with isotropic pressure. In the limit of zero anisotropy, it is shown that a subset of coefficients can be chosen to avoid the overdetermination problem.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Laser-heated diamond anvil cell synthesis and recovery of metastable MnSb 2 and YbZn 2 for post-synthesis transport studies

The creation and exploration of new materials under extreme pressure–temperature conditions has become increasingly reliant on laser-heated diamond anvil cell (LHDAC) techniques, which provide direct access to previously unexplored regions of multinary phase diagrams. Whereas numerous high-pressure phases have been identified in situ, systematic recovery and post-synthesis physical property characterization of these materials remain significant challenges. In this work, we describe the setup and implementation of an LHDAC-based synthesis and recovery workflow and demonstrate its application to metastable MnSb 2 and YbZn 2 phases. Synchrotron x-ray diffraction and spatial mapping confirm dominant formation of the targeted phases, whereas laboratory-based refinement quantifies phase fractions despite intrinsic microstrain and minor secondary phases. High-pressure transport measurements on recovered samples reveal pressure-tunable electronic instabilities in both systems. In MnSb 2 , pressure suppresses two high-temperature magnetic ordering anomalies, observed in transport, by ∼5 GPa and, for higher pressures, induces a new low-temperature feature that increases with further pressure increase. In hexagonal high-pressure YbZn 2 , an electronic reconstruction emerges at ∼11 GPa, characterized by semiconducting-like behavior from ∼30 to 300 K and a broad low-temperature coherence crossover near 30 K. Our results establish LHDAC synthesis not only as a structural discovery tool but also as an experimental platform for investigating correlated quantum states stabilized far from equilibrium thermodynamic conditions.

Huyan, S. [Iowa State University, Ames, IA (United↗
DOE OSTI2024

Direct prediction of saturated neoclassical tearing modes in slab using an equilibrium approach

We demonstrate for the first time that the nonlinear saturation of neoclassical tearing modes (NTMs) can be found directly using a variational principle based on Taylor relaxation, without needing to simulate the intermediate, resistivity-dependent dynamics. As in previous investigations of classical tearing mode saturation (Loizu et al 2020 Phys. Plasmas 27 070701; Loizu and Bonfiglio 2023 J. Plasma Phys. 89 905890507), we make use of Stepped Pressure Equilibrium Code (SPEC) (Hudson et al 2012 Phys. Plasmas 19 112502), an equilibrium solver based on the variational principle of the multi-region relaxed magnetohydrodynamics (MHDs), featuring stepped pressure profiles and arbitrary magnetic topology. We work in slab geometry and employ a simple bootstrap current model J bs = C$\boldsymbol{\nabla}$p to study the bootstrap-driven tearing modes, scanning over the asymptotic matching parameter Δ' and bootstrap current strength. Saturated island widths produced by SPEC agree well with the predictions of an initial value resistive MHDs code (Huang and Bhattacharjee 2016 Astrophys. J. 818 20) while being orders of magnitude faster to calculate. Additionally, we observe good agreement with a simple analytical modified Rutherford equation, without requiring any fitting coefficients. The match is obtained for both linearly unstable classical tearing modes in the presence of bootstrap current, and NTMs, which are linearly stable but nonlinear-unstable due to the effects of the bootstrap current.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

A methodology to compute the critical current limit in Nb3Sn magnets

Numerous experiments have shown that the loads applied to Nb3Sn strands and cables can reduce their critical current. Experiments, performed on uniaxially loaded strands, allowed to define clear laws to describe the evolution of the critical surface as a function of the applied current, field, temperature and strain. It is, however, still unclear how these laws can be applied to superconducting magnets. The present paper proposes a methodology to estimate the critical current and temperature margin reduction on superconducting magnets due to stress on the superconducting material. The methodology is tested on the MQXF magnets, a quadrupole developed for the High Luminosity LHC project, and successfully validated by comparing computed strain with data from strain gauge measurements. Overall, results suggested that, because of the stresses arising in winding during assembly, cool-down and powering, the current limit of the magnet is lower than the expected short sample limit, and that the most critical region does not coincide with the peak field location.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Gyrokinetic simulation of low-frequency Alfvénic modes in DIII-D tokamak

Global gyrokinetic simulations find that a beta-induced Alfvén eigenmode (BAE) and a Low frequency mode (LFM) coexist in the DIII-D tokamak experiments. The LFM can be excited without fast ions and has a frequency inside the gap of the beta-induced Alfvén-acoustic eigenmode (BAAE). The mode structure of the LFM from simulations and many of its parametric dependencies are consistent with experimental observations. For the BAE, the simulated mode structure is consistent with experiment but the frequency is lower than experiment. An antenna scan shows that the LFM is NOT the conventioanl BAAE; rather, it is an interchange-like electromagnetic mode excited by non-resonant drive of pressure gradients. The compressible magnetic perturbations significantly increase the growth rates of the BAE and LFM. On the other hand, effects of trapped electrons and equilibrium current have modest effects on the BAE and LFM. Finally, radial transfer of wave energy is different between the BAE and LFM, resulting in their respective triangular and elliptic mode shapes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

The onset distribution of rotating m , n = 2 , 1 tearing modes and its consequences on the stability of high-confinement-mode plasmas in DIII-D

Abstract Analysis of a multi-scenario database of over 13 000 DIII-D H-mode discharges shows that the m , n = 2 , 1 magnetic islands are dominantly pressure gradient driven, stochastically triggered non-linear instabilities at all edge safety factor ( q 95 ) values. The instability onset time closely follows the exponential distribution in intermediate and high q 95 scenarios and is characterized by near constant onset rate ( λ ), in accordance with Poisson-point processes. This implies that the plasmas are operated in marginally stable conditions, characterized by a small threshold for instability growth and variations in the trigger amplitude and/or the stabilizing mechanisms with temporally uniform random distribution in this database. While the majority of the tearing modes occur in the first current-profile relaxation time of the β N flattop, constant λ throughout the β N flattop shows that the tearing onset is insensitive to the evolution of the equilibrium current profile. In low q 95 scenarios, where a large fraction of the plasmas are operated at low torque, λ increases over the course of the β N flattop, showing that these plasmas evolve toward more unstable conditions. The onset rate rapidly increases with β N , while it does not show a clear dependence on the current gradient at the mode rational surface. Overall, these observations support that the majority of the analyzed 2,1 tearing modes are non-linear, neoclassically driven instabilities and classical stability does not play a dominant role in their onset.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Design of a High Toughness Epoxy for Superconducting Magnets and Its Key Properties

Nb 3 Sn accelerator magnets are poised to enable the luminosity upgrade of the Large Hadron Collider (LHC) at CERN, improving its potential for exploring physics beyond the standard model of particle physics. The prototype Nb 3 Sn magnets consistently need 10–25 quenches to achieve their best performance. A hypothesis is that the long training of these magnets may at least be partially induced by epoxy cracking and bonding failures. In 2018, we showed that several existing epoxies have a higher toughness and less tendency to crack at low temperatures than CTD-101K, the epoxy resin with which almost all Nb 3 Sn accelerator magnets have been impregnated. Here we explore a new high toughness formulation for reducing quench training of Nb 3 Sn accelerator magnets, through combining two amine curing agents to achieve a good glass transition temperature (T g ), adding a viscosity reducer to achieve low viscosity, and experimenting a coupling agent for improved bonding strengths. In this work, we report results of comprehensive materials tests, including thermal shock, tensile, compressive, shear tests, viscosity and T g tests.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

A High-Magnetic-Field Polarized 3He Target for Jefferson Lab’s CLAS12 Spectrometer

We are developing a polarized 3He target concept for use in high luminosity electron scattering experiments in the high magnetic field environment of Jefferson Lab's CLAS12 spectrometer. By combining recent advancements in metastability exchange optical pumping of 3He with cryogenic, double-cell target methods such as those used for the MIT-Bates 88-02 experiment, a target with polarization and gas density comparable to traditional, low-field polarized 3He targets can be reached within high magnetic fields. We have established a new 3He pumping system at JLab, and are preparing for our first tests exploring polarization performance versus magnetic field and gas pressure in a single cell before we move to the construction of a full, cryogenic, double-cell prototype target.

Maxwell, James↗