Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “heterojunction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Fluorinated polythiophenes with ester side chains for boosting the V OC and efficiency in non-fullerene polymer solar cells

As the power conversion efficiency (PCE) of organic photovoltaics (OPVs) approximates the 19 % threshold, wide bandgap (WBG) polythiophenes (PTs) have gained increasing attention due to their simple chemical structures and ease of synthesis, making them promising candidates for large-scale production. However, the benchmark polymer poly(3-hexylthiophene) (P3HT) is limited by its high-lying HOMO energy level, which restricts the open-circuit voltage (V OC ) in solar cells. Here, in this study, we introduce a novel series of PT derivatives (PDC8-T, PDC8-3T, PDC16-3T, and PDC16-3T-2F) featuring ester side chains designed to fine-tune electronic properties through a streamlined three-step synthesis. Additionally, we incorporated a π-spacer to reduce steric hindrance and elongated alkyl side chains to improve solubility and processability. Compared to P3HT, these PT derivatives demonstrate a significant reduction in HOMO energy levels, lowering by approximately 0.3–0.4 eV. Among them, PDC16-3T-2F—with fluorine atom substitution—achieves the lowest HOMO energy level, induces a coplanar molecular conformation, and enhances polymer aggregation behavior. We evaluated these PT derivatives in inverted non-fullerene bulk-heterojunction (NFA BHJ) OPVs. The PDC8-3T device showed a relatively low PCE of 0.69 %, with a V OC of 0.76 V, a short-circuit current density (J SC ) of 3.32 mA/cm 2 , and a fill factor (FF) of 27.3 %. In contrast, the PDC16-3T-2F device achieved an impressive PCE of 7.21 %, with a V OC of 0.85 V, a J SC of 14.60 mA/cm 2 , and an FF of 58.4 %. This remarkable improvement is attributed to the fluorine substitution, which not only enhances molecular orientation but also downshifts the HOMO energy level and further boosts the V OC . Hence, these molecular design strategies have led to a fibrillar bicontinuous interpenetrating network with optimal nanoscale phase separation within the active layer.

14 SOLAR ENERGY↗
DOE OSTI2026

Simplifying the Chemical Design of Nonfused-Ring Electron Acceptors─Lessons Learned from Thienothiophene and Benzodithiophene Cores

Nonfused-ring electron acceptors (NFREA)s have been proposed as alternatives to fused-ring acceptors in organic photovoltaics (OPV)s. The simpler molecular design of NFREAs results in a reduced synthetic complexity, potentially lowering manufacturing costs, and easier access to desired optoelectronic properties by structural modifications. However, they have not seen the same rise in popularity as fused nonfullerene acceptors (NFA)s due to their lower performances in devices. In this work, we explore structure–property relationships of three NFREA molecules based on thieno[3,2-b]thiophene (TT) and benzo[1,2-b:4,5-b′]dithiophene (BDT) cores and malononitrile functionalized-isatin end group acceptors. We describe their synthetic routes, computational analysis, and photophysical and electronic properties. Here, we investigated the effect of changing the core from TT to BDT on electronic properties of the molecules─a result of raising/lowering of the frontier molecular orbital (FMO) levels. We also explored the effect of branched vs nonbranched alkyl groups on the morphological and blend-capabilities in bulk heterojunction (BHJ) OPV devices. These effects were then reflected in the overall device performances, primarily due to favorable FMO energy alignment between the NFREA and polymer. To investigate the behavior of the excited states of the NFREAs within the active layer of the devices, we performed time-resolved microwave conductivity and transient absorption experiments, which confirmed that the TT molecules exhibited very low conductance while the BDT molecule showed moderate photoconductance. Our combined theoretical, synthetic, device, and charge carrier dynamics studies of these materials reveal the central role that structure–property relationships play in future molecular designs of NFREAs that can perform as well as their fused counterparts.

14 SOLAR ENERGY↗
DOE OSTI2024

Hole Relaxation Bottlenecks in CdSe/CdTe/CdSe Lateral Heterostructures Lead to Bicolor Emission

Concentric lateral CdSe/CdTe/CdSe heterostructures show bicolor photoluminescence from both a red charge transfer band of the CdSe/CdTe interface and a green fluorescence from CdSe. Further, this work uses visible and near-infrared transient spectroscopy measurements to demonstrate that the deviation from Kasha's rule arises from a hole relaxation bottleneck from CdSe to CdTe. Hole transfer can take up to 1 ns, which permits radiative relaxation of excitons remaining in CdSe. Simulations indicate that the hole relaxation bottleneck arises due to the sparse density of states and poor spatial overlap of hole states at energies near the CdSe band edge. The divergent kinetics of transfer for band edge and hot holes is exploited to vary the ratio of green and red photoluminescence with excitation wavelength, providing another knob to control emission color. These findings support the use of lateral heterojunctions as a method for slowing carrier relaxation in two-dimensional materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Plasmons Enable Ultralow Threshold Solid-State Triplet Fusion Upconversion with a 2D Sensitizer

Solid-state triplet−triplet annihilation (TTA) upconversion has significant potential for application in light harvesting, optoelectronic devices, and bioimaging. However, the high optical powers required to achieve efficient upconversion have inhibited its adoption. In this work, we demonstrate plasmon-enhanced near-infrared (NIR)-to-blue TTA upconversion in a monolayer WSe2/organic heterojunction. Under far-field excitation, the device reaches a threshold of 19 mW/cm 2 and an external quantum efficiency (EQE) of 0.17% with an anti-Stokes shift of 1.1 eV. Plasmon excitation lowers the threshold to 0.9 mW/cm 2 and improves the EQE to 3.6%. We attribute the plasmon enhancement to surface plasmon polariton (SPP) near-field enhancement and dark-exciton absorption. Optimization of the WSe 2 transfer process is identified as a key factor for the device performance. This work demonstrates that plasmon excitation overcomes the low far-field absorption of 2D transition-metal dichalcogenide (TMD) sensitizers. Consequently, monolayer TMDs can achieve solid-state upconversion with a performance among the best reported.

2D materials↗
DOE OSTI2024

Sputter-Coated TiO 2 Films as Passivation and Hole Transfer Layers for Improved Energy Conversion with Solar Fuel WO 3 /CuWO 4 Photoanodes

Atomic layer deposited (ALD) “leaky” TiO 2 have gained interest as charge-selective protection layers for semiconductor solar fuel electrodes. Here we demonstrate the use of sputter-deposited TiO 2 layers as hole selective contacts for WO 3 /CuWO 4 type 2 heterojunction water oxidation photoanodes for the first time. TiO 2 protection layers with varying thicknesses (2 to 128 nm) were deposited using the RF magnetron sputtering technique. The resulting TiO 2 films are amorphous based on Raman spectroscopy and powder XRD. Photoelectrochemical scans and Vibrating Kelvin probe photovoltage spectroscopy show that 2-8 nm TiO 2 layers nearly double the photocurrent to 0.97 mA cm -2 under AM 1.5 illumination (19% AQE at 350 nm), increase the surface photovoltage signal by 25%, and increase the WO 3 /CuWO 4 bandgap. These effects can be attributed to the selectivity of TiO 2 for photoholes. Additionally, SPV data suggest that TiO 2 overlayers suppress copper-based surface recombination defects. Reduced photocurrent and the photovoltage are seen in thicker TiO 2 films (16 to 128 nm) as a result of an increasing hole transfer resistance and because of light shading effects according to photoaction spectra. The TiO 2 films also improve the stability of the WO 3 /CuWO 4 photoelectrodes, allowing nearly constant O 2 evolution over 3 hours after an initial 20-35% loss. Overall, this work establishes RF magnetron sputtering as a useful method to install amorphous TiO 2 passivation layers for improved WO 3 /CuWO 4 solar fuel photoelectrodes. Furthermore, we show how the combination of PEC with SPV measurements provides insight into the function of the TiO 2 coatings.

CuWO4↗
DOE OSTI2025

ZnTiN 2 as an Electron-Selective, Protective Layer on Si Photocathodes

Photoelectrochemical production of fuels requires photoelectrodes that efficiently convert sunlight to electrochemical energy by producing photovoltage and photocurrent and maintain this ability over time under a variety of pH, illumination, and applied bias conditions. Work in the photovoltaic community has demonstrated that interfaces with high charge carrier selectivity provide high photovoltages. This offers a co-design opportunity to create semiconductor photoelectrodes with contact layers that are both carrier-selective and offer protection from degradation in aqueous solutions. In this work, we explored the ternary nitride ZnTiN 2 as an electronselective, protective layer for Si-based photocathodes. We demonstrated that ZnTiN 2 formed a heterojunction with p-type Si that facilitated electron movement toward the ZnTiN 2 surface for light-driven reduction reactions. Across a variety of electrolyte conditions, ZnTiN 2 /Si produced an open circuit voltage of ca. 400 mV vs the solution potential, while bare Si produced 220−480 mV vs the solution potential depending on conditions. ZnTiN 2 was also shown to protect Si over 72 h at open circuit in the dark in 0.1 M KHCO 3 aqueous solution at pH 10.5, with a 2.4% loss in open circuit voltage compared to a 17% loss for unprotected Si. A protective effect was also observed under illumination during methyl viologen reduction at pH 3.5 for 21 h, with a 2.5% loss in open circuit voltage observed for ZnTiN 2 /Si compared to a 25% loss in open circuit voltage for unprotected Si under the same conditions. Elemental characterization revealed the presence of oxides on the surface of ZnTiN 2 that are consistent with the Pourbaix diagram after photoelectrochemical operation; these oxides appeared to support durability without hindering charge carrier extraction to drive electrochemical work. This work highlights the promise of ZnTiN 2 for durable photoelectrochemical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Electrolyte Immersion Increases Photoconductivity in a Model Polymer Photocathode

Immersing polymer solar cells in aqueous electrolyte for photoelectrochemical (PEC) hydrogen production is likely to cause photophysical changes that could present both challenges and opportunities for engineering functional and durable devices. Herein we study the bulk heterojunction blend poly(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b:4,5-b']dithiophene-2,6-diyl)-alt-(2-(((2-ethylhexyl)oxy)carbonyl)-3-fluorothieno[3,4-b]thiophene-4,6-diyl):poly(N,N'-di(2-octyldodecyl)naphthalene-1,8:4,5-bis(dicarboximide)-2,6-diyl)-alt-(2,2-bithiophene-5,5'-diyl) (PTB7-Th:N2200) excited-state dynamics in electrolyte from femtosecond to millisecond time scales using pump-probe microwave conductivity and absorption spectroscopy. While the blend swells very little, electrolyte exposure increases the microwave-frequency mobility and possibly the yield of photogenerated charges while also decreasing crystallinity. These results indicate an enhancement in key performance metrics, implying that any limitations on the performance of PEC test devices do not arise from active layer-electrolyte interactions. For the PTB7-Th:N2200 blend or similar photocathode systems, our results indicate that improving the interfacial kinetics and/or the carrier lifetime should be prioritized, not protecting the active layer from the electrolyte. Since this observation may not be universal to all polymer systems, future research should focus on identifying their limiting photophysical processes. electrolyte.

14 SOLAR ENERGY↗
DOE OSTI2024

Quantum-Confined Lifshitz Transition on Weyl Semimetal T d -MoTe 2

Adsorption of alkali atoms onto material surfaces is widely utilized for controlling electronic properties and is particularly effective for two-dimensional materials. While tuning the chemical potential and band gap and creating quantum-confined states are well established for alkali adsorption on semiconductors, the effects on semimetallic systems remain largely elusive. Here, utilizing angle-resolved photoemission spectroscopy measurements and density functional theory calculations, we disclose the creation of two-dimensional electron gas and the quantum-confined Lifshitz transition at the surface of a Weyl semimetal T d -MoTe 2 by potassium adsorption. Electrons from potassium adatoms are shown to be transferred mainly to the lowest unoccupied band within the gapped part of the Brillouin zone, which, in turn, induces strong surface band bending and quantum confinement in the topmost layer. The quantum-confined topmost layer evolves from a semimetal to a strong metal with a Lifshitz transition departing substantially from the bulk band. The present finding and its underlying mechanism can be exploited for the creation of electronic heterojunctions in van der Waals semimetals.

36 MATERIALS SCIENCE↗
DOE OSTI2026

A Vibrational Probe of Electrical Doping in N2200 and Fermi-Level Alignment at Polymer Cathode/Metal Cocatalyst/Electrolyte Junctions

Hybrid (photo)­cathodes consisting of conjugated polymer and hydrogen evolution reaction (HER) cocatalysts are an emerging platform for low-cost solar fuel generation. Poly­{[N,N′-bis­(2-octyldodecyl)-naphthalene-1,4,5,8-bis­(dicarboximide)-2,6-diyl]-alt-5,5′-(2,2′-bithiophene)}, known as P­(NDI2OD-T2) or N2200, is a promising electron accepting material for bulk heterojunction photocathodes. Unlike inorganic (photo)­electrodes, much less is known about the energetic alignment of conjugated polymer electrode/metal/electrolyte junctions. Here, in this work, we investigate the electrical doping behavior in an N2200 cathode and its Fermi-level alignment with gold nanoparticles, which is used here as a model for the hydrogen evolution metal cocatalyst. Through UV/visible, Raman, and attenuated total-reflectance infrared spectroelectrochemistry, we observe the impact of electrical doping on the vibrational frequencies of neutral, anion, and dianion species in N2200, which suggests that electron density changes within the corresponding naphthalene-diimide (NDI) units. Upon one-electron reduction, the $C=O$ stretching frequency of the NDI anion unit (polaron) shows a red shift by ∼ 68 cm –1 . Additionally, the $C=O$ stretching frequency of neutral units in the doped N2200 shows a minor red shift of ∼ 5 cm –1 , suggesting charge transfer from neighboring polaron units. Surface-enhanced Raman spectroscopy measurements of a gold nanoparticle-functionalized N2200 electrode revealed that the Au Fermi level only shifts with that of N2200 upon polaron formation; thus, the formal potential of polymer polaron formation determines the behavior of the catalyst Fermi level, which we posit will modulate reaction capability. This mechanistic study provides a new approach for understanding the nanometer-scale energetics at the conjugated polymer/cocatalyst junction and provides critical insights for the future design of HER (photo)­cathodes.

charge transfer↗
DOE OSTI2024

Large-scale 2D heterostructures from hydrogen-bonded organic frameworks and graphene with distinct Dirac and flat bands

The current strategies for building 2D organic-inorganic heterojunctions involve mostly wet-chemistry processes or exfoliation and transfer, leading to interface contaminations, poor crystallizing, or limited size. Here we show a bottom-up procedure to fabricate 2D large-scale heterostructure with clean interface and highly-crystalline sheets. As a prototypical example, a well-ordered hydrogen-bonded organic framework is self-assembled on the highly-oriented-pyrolytic-graphite substrate. The organic framework adopts a honeycomb lattice with faulted/unfaulted halves in a unit cell, resemble to molecular “graphene”. Interestingly, the topmost layer of substrate is self-lifted by organic framework via strong interlayer coupling, to form effectively a floating organic framework/graphene heterostructure. The individual layer of heterostructure inherits its intrinsic property, exhibiting distinct Dirac bands of graphene and narrow bands of organic framework. Our results demonstrate a promising approach to fabricate 2D organic-inorganic heterostructure with large-scale uniformity and highly-crystalline via the self-lifting effect, which is generally applicable to most of van der Waals materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Dual interfacial H-bonding-enhanced deep-blue hybrid copper–iodide LEDs

Solution-processed light-emitting diodes based on non-toxic copper–iodide hybrids are a compelling solution for efficient and stable deep-blue lighting, owing to their tunability, high photoluminescence efficiency and environmental sustainability. Here we present a hybrid copper–iodide that shows near-unity photoluminescence quantum yield (99.6%) with an emission wavelength of 449 nm and colour coordinates (0.147, 0.087), alongside its emission mechanism and charge transport characteristics. Here, we use the thin film of this hybrid as the sole active emissive layer to fabricate deep-blue light-emitting diodes and subsequently enhance the device performance through a dual interfacial hydrogen-bond passivation strategy. This synergetic surface modification approach, integrating a hydrogen-bond-acceptor self-assembled monolayer with an ultrathin polymethyl methacrylate capping layer, effectively passivates both heterojunctions of the copper–iodide hybrid emissive layer and optimizes charge injections. We achieve a maximum external quantum efficiency of 12.57%, a maximum luminance of 3,970.30 cd m −2 with colour coordinates (0.147, 0.091) and an excellent operational stability (half-lifetime) of 204 hours under ambient conditions. We further showcase a large-area device of 4 cm 2 that maintains high efficiency. Our findings reveal the potential of copper–iodide-based hybrid materials for applications in solid-state lighting and display technologies, offering a versatile strategy for enhancing device performances.

14 SOLAR ENERGY↗
DOE OSTI2025

Dynamic disulfide bond networks enable self-healable and mechanically resilient intrinsically stretchable organic solar cells

A dynamic disulfide network introduced into donor/acceptor blends enables room-temperature self-healing and mechanical resilience in intrinsically stretchable organic solar cells, achieving performance recovery after high mechanical strain. The development of intrinsically stretchable organic solar cells (IS-OSCs) faces significant challenges in balancing mechanical durability and optoelectronic performance. Conventional π-conjugated polymer-based donor/acceptor blend films often exhibit limited stretchability and irreversible performance degradation under mechanical strain. To address these limitations, we propose a novel self-healable donor/acceptor blended film with a dual-network morphology, achieved by incorporating a dynamic disulfide bond-based crosslinked network into the bulk-heterojunction film. The resulting thin films demonstrate a power conversion efficiency (PCE) of 16.39% in rigid OSC devices and a fracture strain of 15.6%. Remarkably, the IS-OSCs retain 80% of their initial PCE under 30% strain and exhibit performance recovery after multiple stretch-release cycles at 40% strain through a room-temperature self-healing process. This work provides a proof-of-concept for highly stretchable and durable IS-OSCs, offering valuable insights for advancing the field of wearable energy systems, adaptive solar textiles, and sustainable electronics.

Yang, Wenyu↗
DOE OSTI2025

Polymer nanoparticle photocatalysts realized in non-aqueous solvents

Colloidal organic nanoparticles (oNPs) have emerged as a promising category of photocatalyst, thanks to their long-lived surface-bound charges, electronic tunability, and strong absorption in the visible spectrum. Our previous research has established a direct correlation between charge generation in oNPs and their photocatalytic activity, highlighting their effectiveness as a framework for stable, long-lived free carriers. However, oNPs have been restricted to use only in aqueous environments as a result of being synthesized via either nano-emulsion or nano-precipitation procedures. Herein, we present a method for transferring oNP photocatalysts from water into polar non-aqueous solvents while retaining their long-term colloidal stability. We observed that the polymer chains in the solvent-transferred oNPs rearrange from a predominantly H-aggregate structure in water to a combination of H- and J-aggregate characteristics in N,N-dimethylformamide, suggesting a dynamic rearrangement in response to the new solvent environment. Importantly, transient absorption and time-resolved microwave conductivity measurements confirm that the solvent-transferred oNPs maintain their ability to generate free charges at an internal heterojunction. This development opens unique opportunities for eventually leveraging light-generated, long-lived electrons and holes in synthetic redox chemistry across diverse solvent environments, a direction that will be explored in future studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Photovoltage behaviour of p-Sb 2 S 3 photocathodes for hydrogen evolution: effect of n-In 2 S 3 passivation layers

The 1.76 eV band gap of antimony(iii) sulphide (Sb 2 S 3 ) makes this semiconductor material a promising light absorber for photoelectrochemical water splitting, but scalable fabrication approaches to efficient devices are still lacking. Here we show that compact Sb 2 S 3 films on FTO can be obtained by electrochemical growth from aqueous colloidal sulphur and antimony trichloride solutions, followed by mild annealing. These films can be converted into hydrogen evolution photocathodes after coating with In 2 S 3 passivation layers and the addition of Pt proton reduction co-catalysts. For the first time, vibrating Kelvin probe surface photovoltage (VKP-SPV) spectroscopy is used to observe the carrier dynamics in such photoelectrodes. While the bare Sb 2 S 3 films suffer from high surface recombination rates and poor electron extraction, the In 2 S 3 overlayer is found to raise the photovoltage and cathodic photocurrent density, due to passivation of surface defects and formation of a p–n heterojunction. In thick In 2 S 3 films, these benefits are offset by shading and slow electron transfer. Also, we find that O 2 strongly affects the band bending in the Sb 2 S 3 –air and In 2 S 3 –air junctions and their photovoltage. The optimised devices evolve H 2 at 77.5% Faradaic efficiency and with 0.084% applied bias photon-to-current efficiency (ABPE) at 0.12 V vs. RHE. The low ABPE value is attributed to Sb 2 S 3 sub-bandgap defects visible in SPV spectra, the random orientation of Sb 2 S 3 crystallites in the films, which inhibits charge transport, the absence of crystal facets of Sb 2 S 3 , and a detrimental Schottky junction at the FTO|Sb 2 S 3 interface.

de Araújo, Moisés A. [University of California, Da↗
DOE OSTI2025

Fast and efficient Sb-based type-II phototransistors integrated on silicon

Increasing the energy efficiency and reducing the footprint of on-chip photodetectors enable dense optical interconnects for emerging computational and sensing applications. While heterojunction phototransistors (HPTs) exhibit high energy efficiency and negligible excess noise factor, their gain-bandwidth product (GBP) has been inferior to that of avalanche photodiodes at low optical powers. Here, we demonstrate that utilizing type-II energy band alignment in an Sb-based HPT results in six times smaller junction capacitance per unit area and a significantly higher GBP at low optical powers. These type-II HPTs were scaled down to 2 μm in diameter and fully integrated with photonic waveguides on silicon. Thanks to their extremely low dark current and high internal gain, these devices exhibit a GBP similar to the best avalanche devices (∼270 GHz) but with one order of magnitude better energy efficiency. Their energy consumption is about 5 fJ/bit at 3.2 Gbps, with an error rate below 10−9 at −25 dBm optical power at 1550 nm. These features suggest new opportunities for creating highly efficient and compact optical receivers based on phototransistors with type-II band alignment.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

THz cyclotron resonance of a 2D hole gas in a GaN/AlN heterostructure

The recent discovery of highly conducting two-dimensional hole gases (2DHGs) in GaN/AlN heterojunctions has opened the door to efficient complementary GaN electronics, a long-standing challenge in wide-bandgap semiconductor device physics. Electrical transport studies and simulations indicate that both heavy- and light-hole valence bands are occupied in these 2DHGs, but direct experimental characterization of the fundamental parameters of the mobile holes remains at an early stage. Here, we use time-domain terahertz spectroscopy and pulsed magnetic fields up to 31 T to directly measure cyclotron resonance of the mobile 2D holes in these GaN-based 2DHGs at low temperature (8 K), revealing key material properties including effective masses, densities, scattering times, and mobilities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

SU(4) symmetry breaking and induced superconductivity in graphene quantum Hall edges

In graphene, the approximate SU(4) symmetry associated with the spin and valley degrees of freedom in the quantum Hall (QH) regime is reflected in the fourfold degeneracy of graphene’s Landau levels (LLs). Interactions and the Zeeman effect break such approximate symmetry and lift the corresponding degeneracy of the LLs. We study how the breaking of the approximate SU(4) symmetry affects the properties of graphene’s QH edge modes located in proximity to a superconductor. We show how the lifting of the fourfold degeneracy qualitatively modifies the transport properties of the QH-superconductor heterojunction. For the zero LL, by placing the edge modes in proximity to a superconductor, it is, in principle, possible to realize a 1D topological superconductor supporting Majoranas in the presence of sufficiently strong Zeeman field. Here, we estimate the topological gap of such a topological superconductor and relate it to the properties of the QH-superconductor interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Slope Efficiency and Voltage Reduction at High Current Densities in AlInGaAs Diode Lasers

Here, the slope efficiency and drive voltage of broad area AlInGaAs laser diodes near 865 nm is observed to decrease significantly under quasi-CW pulsed operation at currents well above threshold, in a manner that cannot be explained by thermal effects or carrier leakage over heterojunction barriers. Simulations show that the slope efficiency reduction is explicable by increased free carrier absorption in the waveguide region. Empirical formulas are presented to represent these effects in a closed analytic form suitable for use in simulators for diode-pumped laser systems.

47 OTHER INSTRUMENTATION↗