Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data extraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Extracting Quantitative Data from Lunar Soil Spectra

Using the modified Gaussian model (MGM) developed by Sunshine et al. [1] we compared the spectral properties of the Lunar Soil Characterization Consortium (LSCC) suite of lunar soils [2,3] with their petrologic and chemical compositions to obtain quantitative data. Our initial work on Apollo 17 soils [4] suggested that useful compositional data could be elicited from high quality soil spectra. We are now able to expand upon those results with the full suite of LSCC soils that allows us to explore a much wider range of compositions and maturity states. The model is shown to be sensitive to pyroxene abundance and can evaluate the relative portion of high-Ca and low-Ca pyroxenes in the soils. In addition, the dataset has provided unexpected insights into the nature and causes of absorption bands in lunar soils. For example, it was found that two distinct absorption bands are required in the 1.2 m region of the spectrum. Neither of these bands can be attributed to plagioclase or agglutinates, but both appear to be largely due to pyroxene.

Noble, S. K.↗
NASA NTRS2004

APMS 3.0 Flight Analyst Guide: Aviation Performance Measuring System

The Aviation Performance Measuring System (APMS) is a method-embodied in software-that uses mathematical algorithms and related procedures to analyze digital flight data extracted from aircraft flight data recorders. APMS consists of an integrated set of tools used to perform two primary functions: a) Flight Data Importation b) Flight Data Analysis.

Jay, Griff↗
NASA NTRS2004

Real time on-chip sequential adaptive principal component analysis for data feature extraction and image compression

In this paper, we present a new, simple, and optimized hardware architecture sequential learning technique for adaptive Principle Component Analysis (PCA) which will help optimize the hardware implementation in VLSI and to overcome the difficulties of the traditional gradient descent in learning convergence and hardware implementation.

PCA feature extraction image compression real time↗
DOE OSTI2025

MaTableGPT: GPT‐Based Table Data Extractor from Materials Science Literature

Abstract Efficiently extracting data from tables in the scientific literature is pivotal for building large‐scale databases. However, the tables reported in materials science papers exist in highly diverse forms; thus, rule‐based extractions are an ineffective approach. To overcome this challenge, the study presents MaTableGPT, which is a GPT‐based table data extractor from the materials science literature. MaTableGPT features key strategies of table data representation and table splitting for better GPT comprehension and filtering hallucinated information through follow‐up questions. When applied to a vast volume of water splitting catalysis literature, MaTableGPT achieves an extraction accuracy (total F1 score) of up to 96.8%. Through comprehensive evaluations of the GPT usage cost, labeling cost, and extraction accuracy for the learning methods of zero‐shot, few‐shot, and fine‐tuning, the study presents a Pareto‐front mapping where the few‐shot learning method is found to be the most balanced solution owing to both its high extraction accuracy (total F1 score >95%) and low cost (GPT usage cost of 5.97 US dollars and labeling cost of 10 I/O paired examples). The statistical analyses conducted on the database generated by MaTableGPT revealed valuable insights into the distribution of the overpotential and elemental utilization across the reported catalysts in the water splitting literature.

Yi, Gyeong Hoon [Computational Science Research Ce↗
NASA NTRS2005

Data Format Standardization of Space Weather Model Output at the Community Coordinated Modeling Center

The disparate nature of space weather model output provides many challenges with regards to the portability and reuse of not only the data itself, but also any tools that are developed for analysis and visualization. We are developing and implementing a comprehensive data format standardization methodology that allows heterogeneous model output data to be stored uniformly in any common science data format. We will discuss our approach to identifying core meta-data elements that can be used to supplement raw model output data, thus creating self-descriptive files. The meta-data should also contain information describing the simulation grid. This will ultimately assists in the development of efficient data access tools capable of extracting data at any given point and time. We will also discuss our experiences standardizing the output of two global magnetospheric models, and how we plan to apply similar procedures when standardizing the output of the solar, heliospheric, and ionospheric models that are also currently hosted at the Community Coordinated Modeling Center.

Maddox, M.↗
NASA NTRS1972

A communication link between the GIM data base and a general application program

Utilizing the extract verb of GIM causes the requested information to be extracted from the GIM base and written on to tape. When the GIM extract has completed, a FORTRAN program is then compiled and executed. This program reads the tape generated by GIM, formats and prints the extracted data on the line printer. When an end of file on the extracted tape is encountered the job is terminated.

Argo, W. V.↗
DOE OSTI2025

Data from TropiRoot 1.0 database: tropical root characteristics across environments

TropiRoot 1.0 is a new tropical root database with root characteristics across environment gradients. It has data extracted from 104 new sources, resulting in more than 8000 rows of data (either species or community data). Most of the data in TropiRoot 1.0 includes root characteristics such as root biomass, morphology, root dynamics, mass fraction, architecture, anatomy, physiology and root chemistry. This initiative represents an approximately 30% increase in the currently available data for tropical roots in the Fine Root Ecology Database (FRED). TropiRoot 1.0, contains root characteristics from 25 different countries where seven are located in Asia, six in South America, five in Central America and the Caribbean, four in Africa, two in North America, and 1 in Oceania. Due to the volume of data, when ancillary data was available, including soil data, these data was either extracted and included in the database or their availability was recorded in an additional column. Multiple contributors checked the entries for outliers during the collation process to ensure data quality. For text-based observations, we examined all cells to ensure that their content relates to their specific categories. For numerical observations, we ordered each numerical value from least to greatest and plotted the values, checking apparent outliers against the data in their respective sources and correcting or removing incorrect or impossible values. Some data (soil and aboveground) have different columns for the same variable presented in different units, including originally published units, but root characteristics data had units converted to match the ones reported in FRED. By filling a gap from global databases, TropiRoot 1.0 expands our knowledge of otherwise so far underrepresented regions, and our ability to assess global trends. This advancement can be used to improve tropical forest representation in vegetation models.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1973

Two dimensional digital computer

The development of a two dimensional data processing system is reported that extracts data from optical images by performing multiple logical operations simultaneously. A two dimensional logical circuits is described that contains a liquid crystal negation element and an OR-ing element. The negation element performs 20,000 negations simultaneously, and the OR does 20,000 OR operations simultaneously.

Schaefer, D. H.↗
NASA NTRS2010

Development of an In Flight Vision Self-Assessment Questionnaire for Long Duration Space Missions

OVERVIEW A NASA Flight Medicine optometrist teamed with a human factors specialist to develop an electronic questionnaire for crewmembers to record their visual acuity test scores and perceived vision assessment. It will be implemented on the International Space Station (ISS) and administered as part of a suite of tools for early detection of potential vision changes. The goal of this effort was to rapidly develop a set of questions to help in early detection of visual (e.g. blurred vision) and/or non-visual (e.g. headaches) symptoms by allowing the ISS crewmembers to think about their own current vision during their spaceflight missions. PROCESS An iterative process began with a Space Shuttle one-page paper questionnaire generated by the optometrist that was updated by applying human factors design principles. It was used as a baseline to establish an electronic questionnaire for ISS missions. Additional questions needed for the ISS missions were included and the information was organized to take advantage of the computer-based file format available. Human factors heuristics were applied to the prototype and then they were reviewed by the optometrist and procedures specialists with rapid-turn around updates that lead to the final questionnaire. CONCLUSIONS With about only a month lead time, a usable tool to collect crewmember assessments was developed through this cross-discipline collaboration. With only a little expenditure of energy, the potential payoff is great. ISS crewmembers will complete the questionnaire at 30 days into the mission, 100 days into the mission and 30 days prior to return to Earth. The systematic layout may also facilitate physicians later data extraction for quick interpretation of the data. The data collected along with other measures (e.g. retinal and ultrasound imaging) at regular intervals could potentially lead to early detection and treatment of related vision problems than using the other measures alone.

Byrne, Vicky E.↗
NASA NTRS1974

Monitoring the vernal advancement and retrogradation (green wave effect) of natural vegetation

The author has identified the following significant results. Primary emphasis during the period has been given to completing the resource and land use mask overlays for ultimate subsite MSS data extraction and analysis, refining the computer mask program, verifying resultant masks, and evaluating the initial subsite data. Standard deviations for the selected subsites were generally reduced significantly when compared to the values for the overall 7km x 7km test site areas. This indicates that the masking technique has been successful in reducing the variability of the ERTS-1 MSS data for ultimate subsite comparisons with ground data. The techniques used to locate the 7km x 7km test site areas and extract masked subsite data apparently limit the ability to reliably locate identical very small subsite areas for temporal comparisons. Current evidence indicates that areas which include less than about four pixel elements in either dimension are probably unreliable.

Rouse, J. W., Jr.↗
NASA NTRS1977

Lateral aerodynamic parameters extracted from flight data for the F-8C airplane in maneuvering flight

Flight test data are used to extract the lateral aerodynamic parameters of the F-8C airplane at moderate to high angles of attack. The data were obtained during perturbations of the airplane from steady turns with trim normal accelerations from 1.5g to 3.0g. The angle-of-attack variation from trim was negligible. The aerodynamic coefficients extracted from flight data were compared with several other sets of coefficients, and the extracted coefficients resulted in characteristics for the Dutch roll mode (at the highest angles of attack) similar to those of a set of coefficients that have been the basis of several simulations of the F-8C.

Suit, W. T.↗
NASA NTRS1980

On extracting brightness temperature maps from scanning radiometer data

The extraction of brightness temperature maps from scanning radiometer data is described as a typical linear inverse problem. Spatial quantization and parameter estimation is described and is suggested as an advantageous approach to a solution. Since this approach takes into explicit account the multivariate nature of the problem, it permits an accurate determination of the most detailed resolution extractable from the data as well as explicitly defining the possible compromises between accuracy and resolution. To illustrate the usefulness of the method described for algorithm design and accuracy prediction, it was applied to the problem of providing brightness temperature maps during the NOSS flight segment. The most detained possible resolution was determined and a curve which displays the possible compromises between accuracy and resolution was provided.

Argentiero, P.↗
DOE OSTI2025

Emergent Nanostructure and Ion Transport in Polyzwitterion/Polyanion Blends

We investigated blends of poly(1-(3-sulfonatopropyl)-2-vinylpyridinium) (P2VPPS) and poly(lithium (trifluoromethane)sulfonimide methacrylate) (poly(MTFSI)Li) at varying molar ratios to gain a mechanistic understanding of ionic conductivity in a miscible polyzwitterion/polyanion system. This dataset contains the raw numerical data corresponding to the figures in the manuscript. The data files include the following information: (1) Experimental Data – includes X-ray and neutron scattering measurements, broadband dielectric spectroscopy (BDS) data, extracted DC conductivity values, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) results, extracted glass transition temperatures, etc. (2) CGMD Data – includes molecular dynamics (MD) trajectory files and computed structural correlations. All data files are organized/named according to the figure numbers in the manuscript.

36 MATERIALS SCIENCE↗
NASA NTRS1996

Towards the Interoperability of Web, Database, and Mass Storage Technologies for Petabyte Archives

At the San Diego Supercomputer Center, a massive data analysis system (MDAS) is being developed to support data-intensive applications that manipulate terabyte sized data sets. The objective is to support scientific application access to data whether it is located at a Web site, stored as an object in a database, and/or storage in an archival storage system. We are developing a suite of demonstration programs which illustrate how Web, database (DBMS), and archival storage (mass storage) technologies can be integrated. An application presentation interface is being designed that integrates data access to all of these sources. We have developed a data movement interface between the Illustra object-relational database and the NSL UniTree archival storage system running in a production mode at the San Diego Supercomputer Center. With this interface, an Illustra client can transparently access data on UniTree under the control of the Illustr DBMS server. The current implementation is based on the creation of a new DBMS storage manager class, and a set of library functions that allow the manipulation and migration of data stored as Illustra 'large objects'. We have extended this interface to allow a Web client application to control data movement between its local disk, the Web server, the DBMS Illustra server, and the UniTree mass storage environment. This paper describes some of the current approaches successfully integrating these technologies. This framework is measured against a representative sample of environmental data extracted from the San Diego Ba Environmental Data Repository. Practical lessons are drawn and critical research areas are highlighted.

Moore, Reagan↗
NASA NTRS2016

Features of the Upgraded Imaging for Hypersonic Experimental Aeroheating Testing (IHEAT) Software

The Imaging for Hypersonic Experimental Aeroheating Testing (IHEAT) software is used at the NASA Langley Research Center to analyze global aeroheating data on wind tunnel models tested in the Langley Aerothermodynamics Laboratory. One-dimensional, semi-infinite heating data derived from IHEAT are used in the design of thermal protection systems for hypersonic vehicles that are exposed to severe aeroheating loads, such as reentry vehicles during descent and landing procedures. This software program originally was written in the PV-WAVE(Registered Trademark) programming language to analyze phosphor thermography data from the two-color, relative-intensity system developed at Langley. To increase the efficiency, functionality, and reliability of IHEAT, the program was migrated to MATLAB(Registered Trademark) syntax and compiled as a stand-alone executable file labeled version 4.0. New features of IHEAT 4.0 include the options to perform diagnostic checks of the accuracy of the acquired data during a wind tunnel test, to extract data along a specified multi-segment line following a feature such as a leading edge or a streamline, and to batch process all of the temporal frame data from a wind tunnel run. Results from IHEAT 4.0 were compared on a pixel level to the output images from the legacy software to validate the program. The absolute differences between the heat transfer data output from the two programs were on the order of 10(exp -5) to 10(exp -7). IHEAT 4.0 replaces the PV-WAVE(Registered Trademark) version as the production software for aeroheating experiments conducted in the hypersonic facilities at NASA Langley.

Mason, Michelle L.↗
NASA NTRS2020

Availability of previously lost data and metadata from the Apollo Lunar Surface Experiments Package (ALSEP)

Fourteen types of geophysical instruments deployed at the Apollo 12, 14, 15, 16, and 17 sites by the astronauts for long-term observation were collectively called the Apollo Lunar Surface Experiments Package (ALSEP). These instruments were active from the times of their deployment (November 1969–December 1972) to September 1977. At the conclusion of the experiments, the raw instrument data received from the Moon prior to March 1976 were left unarchived. Portions of the data processed by the principal investigators (PIs) of these experiments had been archived at the NASA Space Science Data Coordinated Archive (NSSDCA) in various formats. The unarchived data, residing then on open-reel magnetic tapes, became lost in the decades since, along with much of the metadata (the supporting documents for these data). We have recently recovered 440 of the previously lost tapes, containing raw ALSEP instrument data from April through June of 1975. Here we describe the data extracted from these tapes and summarize the data products generated for archiving at the NASA Planetary Data System (PDS) and NSSDCA, along with their historical narrative. In addition, we have reformatted many of the datasets delivered to NSSDCA by the PIs in the 1970s for archiving at the PDS. Finally, we have compiled an online searchable repository of ALSEP-related documents by optically scanning tens of thousands of pages of them kept at the Lunar and Planetary Institute in Texas.

S. Nagihara↗
NASA NTRSDate not supplied

Identifying Trends in Landing Profiles After Long Duration Spaceflight

BACKGROUND As NASA’s mission programs begin to shift from Low Earth Orbit (LEO) to planetary mission profiles, the importance of understanding the phenomena a human experience when returning from spaceflight is of increased importance. The purpose of this study was to assess trends across individuals in the symptoms experienced during the landing process of long duration ISS missions. METHODS Data for this study is an aggregation of mission level data from forms used by crew surgeons at R+0, electronic medical records, notes from weekly Space Medicine Operation Team meetings, records in the Shuttle Mission Data Archive, and data collected by research teams in the Human Research Program (HRP). Aggregated data was used in descriptive analysis of the trends in medical events and countermeasure use. The data was also used to identify high value targets for emphasis in on going surveillance efforts. RESULTS Completeness of reporting varied greatly over time and across missions dependent on information sources available for data extraction. Landing forms provided the most complete data but still missed or left unconfirmed, several, common symptoms, and countermeasures. Data aggregation did show to cover gaps within individual data sources. Commonly reported symptoms included nystagmus, vertigo, and nausea. Common protocols for fluid loading and meclizine are reflected within the data set. DISCUSSION The data set generated in this project provides a foundation that show how symptoms of astronauts as they return to Earth varies across the long duration ISS missions. While there is an abundance of information provided within the data set, there are still inconsistencies in reporting especially in the absence of the landing day form. Further data collection practices should be standardized to ease the burden on crew surgeons during R+0 exams and better collect high value variables.

Sam Jacobs↗