Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TMA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

69 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

An automatic multi-precursor flow-type atomic layer deposition system

Designs for two automated atomic layer deposition (ALD) flow reactors are presented, and their capabilities for coating additively manufactured (AM) metal prints are described. One instrument allows the coating of several AM parts in batches, while the other is useful for single part experiments. To demonstrate reactor capabilities, alumina (Al 2 O 3 ) was deposited onto AM 316L stainless steel by dosing with water (H 2 O) vapor and trimethylaluminum (TMA) and purging with nitrogen gas (N 2 ). Both instruments are controlled by custom-programmed LabVIEW software that enables in situ logging of temperature, total pressure, and film thickness using a quartz crystal microbalance. An initial result shows that 150 ALD cycles led to a film thickness of ~55 nm, which was verified with Rutherford backscattering spectroscopy. This indicates that the reactors were indeed depositing single atomic layers of Al 2 O 3 per ALD cycle, as intended.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

First demonstration of robust tri-gate β-Ga 2 O 3 nano-membrane field-effect transistors

Nano-membrane tri-gate β-gallium oxide (β-Ga 2 O 3 ) field-effect transistors (FETs) on SiO 2 /Si substrate fabricated via exfoliation have been demonstrated for the first time. By employing electron beam lithography, the minimum-sized features can be defined with the footprint channel width of 50 nm. For high-quality interface between β-Ga 2 O 3 and gate dielectric, atomic layer-deposited 15 nm thick aluminum oxide (Al 2 O 3 ) was utilized with tri-methyl-aluminum (TMA) self-cleaning surface treatment. The fabricated devices demonstrate extremely low subthreshold slope (SS) of 61 mV dec –1 , high drain current (I DS ) ON/OFF ratio of 1.5 × 10 9 , and negligible transfer characteristic hysteresis. Furthermore, we also experimentally demonstrated robustness of these devices with current–voltage (I–V) characteristics measured at temperatures up to 400 °C.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Structure and electronic tunability of acene alkylamine based layered hybrid organic-inorganic perovskites from first principles

Twelve layered hybrid organic-inorganic perovskites combining oligoacene derivatives [phenylmethylammonium (PMA), naphthylmethylammonium (NMA), anthrylmethylammonium (AMA), and tetrylmethylammonium (TMA)] and lead halides (Cl - , Br - , and I - anions) are investigated by first-principles density functional theory (DFT), showing broad, rational tunability of band gap, quantum well type, and spin-dependent energy band properties. Six compounds are known from previous syntheses and are used to devise a computational search space for likely low-energy structures. Among the six known compounds, a refined structure is identified for (NMA) 2 ⁢ PbCl 4 and a new, lower-energy structure is suggested for (AMA) 2 ⁢PbCl 4 . The DFT based search methodology is next applied to predict the likely structures for the six unknown compounds. Computationally predicted energy levels for all 12 compounds from spin-orbit coupled hybrid DFT reveal tunable type I quantum well alignments, with frontier orbitals located on the inorganic component, on the organic component, or on both, as controlled by cation and anion selection. In conclusion, several structures spontaneously break local and global inversion symmetry, causing strong spin splitting of the conduction bands [up to 0.12 eV for (PMA) 2 ⁢PbCl 4 ] and showing potential for spin-dependent transport properties and future spintronic and tunable chiroptical applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Cross talk between RNA N6‐methyladenosine methyltransferase‐like 3 and miR‐186 regulates hepatoblastoma progression through Wnt/β‐catenin signalling pathway

Abstract Objectives N6‐methyladenosine (m6A) is a ubiquitous epigenetic RNA modification that plays a pivotal role in tumour development and metastasis. In this study, we aimed to investigate the expression profiling, clinical significance, biological function and the regulation of m6A‐related genes in hepatoblastoma (HB). Materials and Methods The mRNA and protein expression levels of m6A‐related genes were analysed using Gene Expression Omnibus (GEO) and tissue microarray (TMA) cohort. Kaplan‐Meier analysis was performed to evaluate the prognostic value of m6A‐related genes in HB. Knockdown of m6A‐related genes was conducted to analyse its function on cell proliferation, migration and invasion. Furthermore, bioinformatics analysis and experimental verification were used to explore the potential molecular mechanism and signalling pathway. Results We found that most m6A‐related genes were significantly upregulated in HB tumour tissues. High levels of methyltransferase‐like 3 (METTL3, P = .013), YTHDF2 ( P = .037) and FTO ( P = .032) indicated poor clinical outcomes, and the upregulation of METTL3 was an independent prognostic factor in HB patients. Functional assays showed that knockdown of METTL3 could dramatically suppress the proliferation, migration and invasion of HB cells. In addition, METTL3 was identified to be a direct target of microRNA‐186 (miR‐186). Consistently, miR‐186 was low expressed in HB tumour tissues. Moreover, overexpression of miR‐186 significantly inhibited cell aggressive phenotype both in vitro and in vivo, while the inhibitory effect could be reversed by METTL3 overexpression. Mechanism study indicated that miR‐186/METTL3 axis contributed to the progression of HB via the Wnt/β‐catenin signalling pathway. Conclusions M6A‐related genes were frequently dysregulated in HB. miR‐186/METTL3/Wnt/β‐catenin axis might serve as novel therapeutic targets and prognostic biomarkers in HB.

Cui, Xichun↗
DOE OSTI2024

Enhanced nucleation mechanism in ruthenium atomic layer deposition: Exploring surface termination and precursor ligand effects with RuCpEt(CO)2

Miniaturization of microelectronic devices necessitates atomic precision in manufacturing techniques, particularly in the deposition of thin films. Atomic layer deposition (ALD) is recognized for its precision in controlling film thickness and composition on intricate three-dimensional structures. This study focuses on the ALD nucleation and growth mechanisms of ruthenium (Ru), a metal that has significant future implications for microelectronics. Despite its advantages, the deposition of a high surface-free energy material like Ru on a low surface-free energy material such as an oxide often faces challenges of large nucleation delays and non-uniform growth. To address these challenges, we explored the effectiveness of organometallic surface pretreatments using trimethylaluminum (TMA) or diethylzinc (DEZ) to enhance Ru film nucleation and growth. Our study employed a less-studied Ru precursor, cyclopentadienylethyl(dicarbonyl)ruthenium [RuCpEt(CO)2], which demonstrated promising results in terms of reduced nucleation delay and increased film continuity. Ru ALD was performed on silicon substrates with native oxide, using RuCpEt(CO)2 and O2 as coreactants. Our findings reveal that surface pretreatment significantly improves nucleation density and film thickness within the initial 60 ALD cycles, achieving up to a 3.2-fold increase in Ru surface coverage compared to nonpretreated substrates. Supported by density functional theory calculations, we propose that the enhanced nucleation observed with RuCpEt(CO)2 compared to previously-studied Ru(Cp)2 is due to two key mechanisms: the facilitated removal of CO ligands during deposition, which enhances the reactivity of the precursor, and a hydrogen-abstraction reaction involving the ethyl ligand of RuCpEt(CO)2 and the metal-alkyl groups on the surface. This study not only advances our understanding of Ru ALD processes but also highlights the significant impact of precursor chemistry and surface treatments in optimizing ALD for advanced microelectronic applications.

Materials Science↗
DOE OSTI2022

Hawaii Wave Surge Energy Converter (HAWSEC) OSU O.H. Hinsdale Basin

The following information and metadata applies to both the Phase I (Hydrodynamics) and Phase II (Full System Power Take-Off) zip folders which contain testing data from the OSU (Oregon State University) O.H. Hinsdale Wave Research Laboratory, from both OSU and the University of Hawaii at Manoa (UH). See zip folders provided further below in the downloads section. For experimental data of the full system, including PTO, see Phase II dataset. There are two main directories in each Phases's zip folder: "OSU_data" and "UH_data". The "OSU_data" directory contains data collected from their DAQ (data acquisition system), which includes all wave gauge observations, as well as body motions derived from their Qualisys motion tracking system. The organization of the directory follows OSU's convention. Detailed information on the instrument setup can be found under "OSU_data/docs/setup/instm_locations". The experiments conducted are documented in the "OSU_data/docs/daq_logs", which provides the trial number to the corresponding data located under "OSU_data/data" in several formats (e.g., ".mat" and ".txt"). Inside the trial directory, data is provided for each of the instruments defined in "OSU_data/docs/setup/instm_locations". The "UH_data" directory contains data collected from their DAQ. The data is stored in a ".tdms" file format. There are free plug-ins for Microsoft Excel and MathWorks MATLAB to read the ".tdms" format. Below are a few links providing methods to read in the data, but a Google search should identify alternatives sources if these no longer exist (valid as of January 2024): Excel: http://www.ni.com/example/27944/en/ MATLAB: https://www.mathworks.com/matlabcentral/fileexchange/30023-tdms-reader The Excel plugin is recommend to get a quick overview of the data. The UH data is organized by directory name, in which the sub-directories for each experiment contains a directory whose name defines the wave height and period for the experimental data within. For example, a directory name "H02_T0275" corresponds to an experiment with wave height 0.1m and a period of 2.75s. For random wave data, the gamma value is also included in the directory name. For example, a directory name "H02_T0225_G18" corresponds to an experiment with a significant wave height of 0.2m, a peak period of 2.25s, and a gamma value of 1.8, with each spectra being a TMA spectrum. For the free decay experiments, the directory name is defined by the initial angular displacement. For example, a directory name "ang05_run01" corresponds to an experiment with an initial angular displacement of 5 degrees. There is a dataset in the UH data for each corresponding experiment defined in the OSU DAQ logs. The ".tdms" data is output from the DAQ at fixed intervals. Therefore, if multiple files are contained within the folder, the data will need to be stitched together. Within the UH dataset, there are two input channels from the OSU DAQ providing a random square wave signal for time synchronization ("ENV-WHT-0010") and a high/low signal ("ENV-WHT-0012") to identify when the wave maker is active (+5V). The UH data is logged as a collection of channel outputs. Channels not in use for the OSU testing (either Phase I or Phase II) are marked "nan" below. If the sensor is disconnected, it will record noise throughout the experiment. Below are the channel definitions in terms of what they measure: GPS Time = time CYL-POS-0001 = position between flap and fixed reference CYL-LCA-0001 = force between flap and hydraulic cylinder REC-LPT-0001 = nan REC-HPT-0001 = nan REC-HPT-0002 = nan REC-HPT-0003 = nan HHT-HPT-0001 = pressure at exhaust ("head" only) REC-FQC-0001 = nan REC-FQC-0002 = nan HHT-FQC-0001 = flow at exhaust ("head" only) ENV-WHT-0001 = nan ENV-WHT-0002 = nan ENV-WHT-0003 = nan ENV-WHT-0010 = random signal from OSU DAQ ENV-WHT-0012 = high/low signal from OSU DAQ Also included is a calibration curve to convert the string pot data to flap pi...

16 TIDAL AND WAVE POWER↗
DOE OSTI2020

Test Plan to Investigate the Optimal Cure Schedule of an Epoxy Resin for Its Application as an Adhesive in Optocouplers

Epoxy resins are polymeric materials that are known for their versatility, low cost, and strong thermal and mechanical properties. They can be used as coatings, adhesives, automotive primers, and have become staples in electronics, aerospace composites and semiconductor encapsulates. Recently, LANL has experienced a decline in the quality of a specialized electronic device, called an optocoupler, which is normally acquired from commercial suppliers. Because of this, a group at LANL is exploring the feasibility of in-house manufacturing of an optocoupler that is better suited for their application. The current prototype has resulted in adhesive failure after being exposed to several thermal cycles. There is a need to investigate the possible reasons for this failure, particularly how the cure schedule of the epoxy might affect its adhesive strength over time and in cycled temperatures. To assist in this investigation, a test plan has been developed involving multiple experiments using thermomechanical analysis (TMA), dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC).

36 MATERIALS SCIENCE↗
DOE OSTI2024

Field-Effect Passivation by Desired Charge Injection into SiNx Passivation in Crystalline-Silicon Solar Cells

Effective surface passivation is a necessity for high efficiency crystalline silicon solar cells. The field effect passivation of p-type surfaces is typically accomplished using aluminum oxide (Al 2 O 3 ) which contains a high density of negative fixed charges. The accumulation layer formed by the negative charges prevents surface recombination loss of photo-generated carriers by repelling minority carriers (electrons) from the surface with interface state recombination centers. However, the Al 2 O 3 surface passivation technology has two key concerns of cost and safety associated with the precursor material tri-methyl-aluminum (TMA).

14 SOLAR ENERGY↗
DOE OSTI2024

Cost-efficient temperature mediation of DPMS synthesis in flow using continuous flow chemistry

An efficient synthesis of diphenylmethylsilanol (DPMS) utilizing continuous flow chemistry was performed using a coil reactor and an ice bath. The inclusion of careful temperature control minimized the exothermic production of an unwanted dimer. Yields of up to 88% were obtained and dimer formation as low as 2.2% was confirmed by NMR. This material will be used in the formulation to make SX358 and its physical and chemical characteristics will be determined using DSC, DMA, TMA, compression set testing and FTIR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Modulated Thermomechanical Analysis of Compression-Molded High-Density Polyethylene

Thermomechanical analysis (TMA) experiments conducted on high-density polyethylene (HDPE) show both reversible and irreversible dimensional changes. To further explore these reversible and irreversible processes, modulated thermomechanical analysis (MTMA) was used. Before reliable data on compression-molded HDPE was collected, a parameter optimization was performed to obtain a suitable MTMA method. Once a suitable method was obtained, several MTMA experiments were conducted on compression-molded HDPE. This work highlights the steps taken during the MTMA parameter optimization and the results obtained from MTMA experiments conducted on pristine compression-molded HDPE samples.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Swelling of FK800

The report summarizes an assessment of the strain experienced by FK800 upon change in humidity and temperature of its surroundings. The FK800 samples were obtained from Laural Hargrove in the form of a disk that was 12 mm in diameter and 0.5 – 1 mm in thickness. The sample had a Lot # 05172301. For TMA testing, the sample was cut into a small film of dimensions 0.5 mm x 3.38 mm x 6.57 mm and tested under the tensile mode. A single set of swelling experiments were performed on the sample between November and December 2024.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Low-cost and high-performance heat exchangers for CSP

This project aimed to design and manufacture a low-cost and high-performance, particle–to–sCO 2 heat exchanger (HX) for Concentrated Solar Power (CSP) using additive manufacturing (AM). Three enabling technologies will be integrated to achieve the targeted cost and performance. The first technology is the extreme high‐speed laser materials deposition (LMD) AM process known by its German acronym EHLA that was invented at the Fraunhofer Institute for Laser Technology. The EHLA process utilizes a specially designed powder-feeding nozzle that enables a laser to melt the powder particles above the melt pool, in contrast to the conventional LMD process where the powders are melted inside the melt pool. EHLA enables much faster deposition rate than conventional LMD without the need to wait for the powders to melt. The second technology is an innovative double-helical HX geometry that can be easily fabricated using the EHLA process by rotating a rod at a high-speed to take advantage of the high EHLA deposition rate. The double-helical fins separate the hot region (the hot particle side) and the cold region (the sCO 2 side) and provide large heat transfer surface area without a large pressure drop on the sCO 2 side. The particle side will have a larger gap to facilitate the particle flow. The outer rims of the double helixes can be sealed off using the same AM process. After sealing-off, additional double helixes can be built radially on top of the first set to improve HX performance. The HX can be installed vertically for gravity-driven flow of the hot particles if necessary. The third technology is a low-cost high-temperature alumina-forming austenitic (AFA) steel TMA-6350 that has creep and oxidation resistance up to 1100 °C. These technologies together will enable high-performance and low-cost HXs for particle–to–sCO 2 for CSP.

14 SOLAR ENERGY↗
DOE OSTI2025

SITCOMTN-148: LSST Camera Electro-Optical Test (Run 7) Results

This note collects results from the LSST Camera electro-optical testing prior to installation on the TMA. We describe the focal plane characterization, optimization, and the resulting default settings. Results from eo-pipe are shown for standard runs such as B-protocols, Dense and SuperDense PTCs, gain stability, OpSim runs of Darks, and Darks with variable delays. We also describe features such as e2v Persistence, ITL phosphorescence in coffee stains, remnant charge near Serial register following saturated images, vampire pixels, ITL dips, and other sensor features.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Thermomechanical Analysis of Polysulfone-Nanodiamond Mixed Matrix Membranes

Idaho National Laboratory is developing a polymer membrane designed to concentrate oxygen from air to assist in cleaner coal combustion and other gasification processes. These membranes were formed by adding nanodiamond particles to enhance their transport properties. This study focuses on the thermomechanical analysis (TMA) of these membranes to probe the behavior between the nanodiamond particles and the polymer.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2020

Coefficient of Thermal Expansion during Ratchet Growth of TATB Compactions

Triamino trinitrobenzene (TATB) is an insensitive high explosive, meaning that it is quite immune from accidental detonation and only performs in appropriately engineered configurations. While this is advantageous for applications, the TATB crystal is graphitic and possesses significant thermal and mechanical anisotropy. Compactions of TATB crystals, with or without binder, have been shown to have oriented TATB crystals that relate to the pressing geometry and process, and this TATB texture necessarily imparts microscale and macroscale anisotropy to the compaction. By a mechanism not fully understood, thermal cycling results in irreversible volume expansion (also called ratchet growth) of the compaction likely by creating stress points on the microscale. Changes in density caused by thermal cycling can certainly effect the explosive performance. Our past characterization of the ratchet growth phenomenon has focused on the magnitude of the irreversible strain as measured before and after a thermal cycle. Finally, in the work presented here, we analyze the evolving thermal expansion behavior during the ascending and descending temperature ramps, providing further insight into the material changes taking place during the ratchet growth phenomenon.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗