SEARCH · Engineering Papers

Results for “Synthesis and processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Combustion synthesis of Eu 2 O 3 nanomaterials with tunable phase composition and morphology

Combustion reactions in europium nitrate – acetylacetone – 2-methoxyethanol solutions and gels were investigated to produce europium (III) oxide (Eu 2 O 3 ) nanocrystalline materials and thin films. Thermal analyses of solutions indicated that the 2-methoxyethanol solvent also acts as a fuel in the absence of acetylacetone. Adding acetylacetone increases the overall heat of the reaction. Thermal analysis results revealed that the slow oxidation of unburned hydrocarbon residues follows the primary combustion reaction. Time-temperature profile measurements of the bulk combustion synthesis process in air and nitrogen atmospheres enabled the extraction of the maximum reaction temperature and the heating and cooling rates in the combustion zone. Several direct correlations exist between measured combustion parameters and the phase composition of the products. Combustion in air results in mixed-phase cubic and monoclinic nanocrystalline Eu 2 O 3 . Increasing the acetylacetone concentration in solutions increases the synthesis temperature and decreases the quantity of cubic Eu 2 O 3 . Here, the reaction of solutions in a nitrogen atmosphere or diluted with Eu 2 O 3 provides control of the product phase composition and reduces the quantity of the monoclinic phase. Transmission electron microscopy imaging shows that the Eu 2 O 3 end products are highly porous aggregates of nanocrystalline particles. Electrospraying of reactive solutions onto different substrates followed by short annealing makes the preparation of Eu 2 O 3 materials with diverse morphologies possible.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Technology Strategy Assessment: Findings from Storage Innovations 2030 Bidirectional Hydrogen Storage

Hydrogen is the most common element in the universe, comprising nearly 75% of all normal matter, and it has been used by scientists for centuries, but it was not fully recognized as an element until 1766, when it was isolated by Henry Cavendish. Early work focused on the generation of hydrogen through the oxidation of metals in water, which released hydrogen gas. Hydrogen’s lighter-than-air and flammable properties were immediately used in engines, zeppelins, and as feedstock for a wide variety of chemical reactions. Several approaches were developed for the production of hydrogen with the most common being associated with the production and conversion of hydrocarbon-based fuels. Coal gasification, steam methane reforming, and other reformation processes provide the majority of current hydrogen production due to the relatively low cost of hydrogen produced through these processes. More than 95% of hydrogen production is used for industrial processes rather than energy storage. To facilitate affordable decarbonization of these industrial processes and to advance the use of hydrogen as a fuel in transportation, DOE launched the Hydrogen Shot as part of the Energy Earthshots Initiative. The goal of the Hydrogen Shot is to reduce the cost of clean hydrogen by 80% to $1/kg of clean hydrogen production within one decade (known as the “1 1 1” goal). This is distinct from the Long-Duration Storage Shot, which is the primary focus of this report; however, it is intrinsically linked to bidirectional hydrogen storage. Several important chemical synthesis processes are dependent upon hydrogen, and the production and use of hydrogen is generally driven by its connection to one of these markets. For example, ammonia is one of the most highly produced chemicals in the world and it depends chiefly on hydrogen. Ammonia is primarily used for agricultural fertilizer and is considered to be largely responsible for a doubling of agricultural production per unit of land over the last century. Another one of hydrogen’s primary uses is as a catalyst in petroleum refining during the desulfurization process. Beyond chemical production, hydrogen is used as a reductant in the production of steel and has been demonstrated as a substitute for metallurgical coal in the production of raw iron. It is even used in the hydrogenation reaction for food products to create more shelf-stable semi-solid fats. However, while hydrogen is produced on the order of 100 million metric tons/year globally to feed these industries, more than 95% of hydrogen is produced from hydrocarbons that emit CO2 during the process. Conversely, electrolysis is a process by which electricity is used to separate hydrogen and oxygen in water molecules, usually across a membrane. Hydrogen production via electrolysis lowers the carbon intensity of produced hydrogen when coupled with low-carbon electricity. Currently, global electrolysis capacity is on the order of 1 GW, which equates to about 500 metric tons/day of hydrogen production. To support large-scale industrial decarbonization, capacity will likely need to increase by two to three orders of magnitude. Electrolysis technology is broadly separated into groups that are defined by the electrolyte used, with further subdivision based on the operating characteristics. The majority of commercial electrolyzer systems are based around three main technology groups: liquid alkaline, proton exchange membrane, and solid oxide. Liquid Alkaline (LA) electrolysis is the oldest, most mature, least expensive, and most common commercial technology, with 400 plants in operation by 1902. Its hydrogen output is low relative to the size of the system due to a low current density. LA electrolysis utilizes a liquid potassium hydroxide solution as the electrolyte. Proton exchange membrane (PEM) electrolysis (also known as polymer electrolyte membrane electrolysis), described in 1960, relies on an acid-impregnated polymer membrane as the electrolyte and typically offers three to six times higher hydrogen production per unit cell area than LA electrolysis. Solid oxide electrolysis, or high-temperature electrolysis, utilizes a ceramic cell as the electrolyte and operates on steam rather than liquid water, enabling electrical efficiencies of more than 90%, which is up from 60% with PEM. Two pre-commercial electrolyzer technologies to note are alkaline exchange membrane (AEM) and proton-conducting solid oxide electrolysis cell (SOEC). AEM potentially has the advantages of both LA and PEM technologies in that it is able to use low-cost materials like LA but with the ability to operate at higher output pressures with a smaller footprint like PEM. Proton-conducting SOEC is similar to commercial SOEC, which uses an oxide-conducting ceramic; however, it uses a proton-conducting ceramic that has the potential to operate at lower temperatures and has lower capital costs. Each of these technologies is experiencing a rapid improvement in performance and a reduction in installed cost, and each appears to be well suited to specific applications. Besides differences in the type of electrolyzer used, the main difference in the architecture of bidirectional hydrogen systems is how the hydrogen is stored. Currently, the most cost-effective way to store large amounts of hydrogen gas is underground, such as in large salt caverns that have been hollowed out. These salt caverns are geographically concentrated in small portions of the United States and are not generally near large metropolitan areas; however, other subsurface architectures are being investigated to expand this reach. A more widely deployable option is aboveground pressurized tanks. These systems are about 10 times as expensive because of the materials and safety margins required to hold hydrogen at high pressures. A third option is using materials-based storage, such as liquid organic hydrogen carriers. By reversibly attaching the produced hydrogen to other molecules, it can be stored at near atmospheric pressure and room temperature. This has the potential to reduce the material cost of storage but may result in a reduction in the efficiency of the process because there are both hydrogen uptake and release processes. While materials-based storage has not been used extensively for large-scale hydrogen storage in the past, there is currently significant activity regarding developing materials and processes for use in large-scale hydrogen storage applications. Electrolysis-produced hydrogen offers an unusual opportunity for energy storage applications. Unlike more conventional energy storage approaches, such as batteries, which operate entirely within electrical markets, hydrogen is a valuable product beyond the electric market and can be directed to the most lucrative use. Hydrogen also can be directly converted back to electricity using either a fuel cell or turbine, or it can be sold to other markets, such as chemical synthesis, steel production, or even export. In this way, excess electricity can be upgraded to the most valuable product. Finally, its use can be actively managed between multiple off-takers; for example, local hydrogen storage can provide a specific amount of stored electricity and any excess can be exported to ammonia production. This flexibility is amplified by the fact that hydrogen storage has fully decoupled power and energy components, which allows for affordable scaling options. Together, this allows a substantial amount of creativity to enable the economic utilization of variable power resources while supporting decarbonization of the industry.

08 HYDROGEN↗

DOE OSTI2025

Tuning 3-D Nanomaterial Architectures Using Atomic Layer Deposition to Direct Solution Synthesis

The ability to synthesize nanoarchitected materials with tunable geometries provides a means to control their functional properties, with applications in biological, environmental, and energy fields. To this end, various bottom-up and top-down synthesis processes have been developed. However, many of these processes require prepatterning or etching steps, making them challenging to scale-up to complex, nonplanar substrates. Furthermore, the ability to integrate nanomaterials into hierarchical arrays with precise control of feature spacing and orientation remains a challenge. One approach to overcome these patterning challenges is the use of surface modification layers to guide the resulting geometry of nanomaterial architectures grown from the substrate. A powerful strategy to accomplish this is what we will refer to as “surface-directed assembly,” where the resulting geometric parameters (feature size, shape, orientation) are predetermined by the initial surface layer. In particular, the use of Atomic Layer Deposition (ALD) to form a surface layer, followed by solution-based growth processes, has the ability to synthesize architected structures with tunable geometries on complex, nonplanar surfaces. Over the past decade, we have reported a series of studies where surface-directed assembly is used to synthesize ZnO nanowires (NWs) on top of a variety of substrates. In this case, a thin film of ZnO is deposited onto the substrate using ALD, which can guide the NW diameter, spacing, and angular orientation with respect to the substrate by controlling epitaxial relationships. Furthermore, we have shown that by depositing a submonolayer overcoat of a secondary material (e.g., amorphous TiO 2 ), nucleation sites are partially blocked, which can further tune the spacing between nanowires while minimizing changes to their other geometric properties. This approach can be used to generate multilevel hierarchical structures, such as hyperbranched NW arrays with tunable control of each level of hierarchy using ALD. Finally, we have demonstrated that the tunable control of geometric parameters can be scaled-up to curved, nonplanar substrates. This highlights the power of ALD to conformally and uniformly deposit the seed layers on complex substrates with subnanometer precision. To complement these seeded hydrothermal approaches, we expanded this strategy to include conversion chemistry of the initial ALD seed layers. For example, by replacing ZnO with Al 2 O 3 as the seed layer without changing the hydrothermal growth conditions, Al–Zn layered-double hydroxide nanosheets can be formed instead of nanowires. In another example of conversion chemistry, a solution anion-exchange process was used to incorporate sulfur into ALD metal oxide films. In both of these conversion processes, the properties of the initial ALD film enabled tuning of the resulting nanostructure geometry. In this Account, we describe the use of ALD to guide the growth of diverse nanomaterial systems, with tunable control over their geometry and composition. We further show how these approaches can be used to tune functional properties for a range of applications, including superomniphobic surfaces, antibiofouling coatings, and photocatalysis. In conclusion, we conclude with an outlook on how the combination of ALD and solution synthesis can enable future directions in scalable nanomanufacturing to overcome the limitations of traditional top-down and bottom-up approaches.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Electrochemical Li intercalation in b-As y P 1–y alloys: In-situ Raman spectroscopy study

Structural evolution of b-As y P 1-y alloys with varying As concentration, y was studied during Li-intercalation using in-situ Raman spectroscopy. A monotonic redshift of all the vibrational modes corresponding to P-P bonds (A 1 g , A 2 g , B 2g ), As-As bonds (A 1 g , A 2 g , B 2g ), and As-P bonds of all the samples was observed during the initial stages of the intercalation process due to the softening of each mode caused by the intercalation driven donor-type charge-transfer from Li to b-As y P 1-y . The emergence of a new peak identified as the E g mode of gray As, above an intercalation threshold, is indicative of the presence of an intercalation-driven structural phase segregation process. Further, the A 1g mode of gray As emerging after this intercalation threshold lies in close proximity of the A 2 g Raman mode of b-As y P 1-y . All the peaks beyond the intercalation threshold show an upshift due to the co-existence of gray As with b-As y P 1-y alloys causing strain and thus hardening of the phonon modes. In the sample with the highest As concentration phase segregation takes place during the synthesis process. Computational modeling reveals the co-existence of gray As in the b-As y P 1-y alloys with high As concentrations. It also confirms the existence of a local structural segregation taking place at a critical Li concentration during the intercalation process. Furthermore, this work shows the significance of intercalation on structural changes in the search for new phases of b-As y P 1-y alloys.

2D Materials↗

DOE OSTI2026

Ternary and Quaternary Nickel-Iron-Oxide-Based Thin Films as Oxygen Evolution Reaction Catalysts in Alkaline Media

Alkaline water electrolyzers are a promising technology for energy storage and conversion through the electrochemical production of hydrogen, however the slow kinetics of the oxygen evolution reaction (OER) pose a major challenge. The alkaline environment enables the use of non-Pt-group metals as OER catalysts, in particular NiFe-based materials. In this study, Mn and/or Cr were elementally mixed with NiFe to further improve the OER catalyst properties through a controlled, systematic synthesis process involving thin films prepared by electron beam-induced physical vapor deposition (PVD). By exploring both simultaneous co-deposition and serial deposition of the different metals, the OER performance was investigated as a function of both the location of Mn or Cr in the multi-metal NiFe-based catalysts and the difference between surface versus bulk mixing. The distinct differences in the redox dynamics, surface oxidation, and stability of the seven studied catalysts reveal metal Cr- and/or Mn-overlayers as a promising synthesis approach for fine-tuning of catalyst properties and improving the OER performance.

Alkaline Water Electrolysis↗

DOE OSTI2024

Advancing the Performance of Lithium-Rich Oxides in Concert with Inherent Complexities: Domain-Selective Substitutions

Historically, modifications to Li- and Mn-rich (LMR) cathodes have been studied in relation to their efficacy in solving challenges such as oxygen loss and voltage fade, which are inherent to the activation process of these electrodes. However, even in the presence of these phenomena, well-optimized LMR cathodes show considerable promise as earth-abundant options, particularly if other barriers to implementation can be overcome or mitigated. As the complex mechanisms of LMR electrodes are known to stem from the local, chemical inhomogeneities that define the nanocomposite domain nature of these oxides, strategies aimed at manipulating the performance of activated electrodes, irrespective of voltage fade, through domain-selective modifications, could prove instructive. In this work, we use a novel synthesis process aimed at influencing the site occupancy of substituted Sn 4+ , as an example 4+ cation, into a Co-free Li 1.13 Mn 0.57(1–x) Sn 0.57x Ni 0.3 O 2 LMR oxide. We show that Sn 4+ can be selectively substituted into Li-rich environments. The consequences are revealed to be both chemical and morphological, and the domain-selective doping strategy provides a knob for directed control of the low state-of-charge impedance behavior. In conclusion, these results reveal new clues and insights with respect to further advancing the practical relevance of LMR cathode particles and electrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Supercritical preparation of doped (111) facetted nickel oxide for the oxygen evolution reaction

Green hydrogen is of great interest as a replacement for traditional fossil fuels in a variety of energy applications. However, due to the poor kinetics present in the oxygen evolution reaction (OER) half-reaction, nanostructured catalysts are needed to reduce the reaction overpotential. Nickel oxide has previously been shown to be a promising alternative to expensive Pt-group based catalysts for the OER in alkaline media. Herein, facetted NiO nanosheets have been doped with Fe, Mn, or Co to reduce its catalytic overpotential for the OER. A supercritical synthesis process was used to promote the mass transport of the reactants while preserving catalytic surface area. Microscopy, diffraction, spectroscopy, and adsorption techniques were used to understand the morphological changes resulting from the inclusion of each dopant, as well as characterize the surface chemistry presented by the doped (111) facet. The pH was found to affect the properties of mixing due to difference in hydrolysis rates and catalysis of the hydrolysis/condensation. The dopants exhibited distinct effects on OER activity: Mn increased the overpotential to 742 mV vs. RHE, while Co and Fe reduced it to 502 mV and 457 mV, respectively. In summary, a straightforward and novel synthesis method is presented to prepare doped NiO(111) nanosheets, and their surface characteristics are explored to understand their varied electrochemical performances.

08 HYDROGEN↗

DOE OSTI2025

Structural evolution and magnetic hardness of (Sm,Zr)(Fe,Co,Ti) 12 alloy particles via reduction-diffusion

The quest for achieving high coercivity in Sm(Fe,Co,Ti) 12 alloys, despite their inherent strong magnetocrystalline anisotropy, has posed significant challenges. Recently, (Sm,Zr)(Fe,Co,Ti) 12 monocrystalline particles have exhibited coercivity μ 0 H c > 1.2 T, showcasing promising prospects and significant potential for both manufacturing and research endeavors. This study delves into the structural evolution of (Sm,Zr)(Fe,Co,Ti) 12 (1:12) alloy particles made via the calciothermic reduction-diffusion synthesis process as influenced by the molar ratios of Ca atoms to O 2- ions (Ca/O), annealing time and annealing temperature. Critical insight that informs conditions to optimize the magnetic response is gained via systematic experimentation and advanced electron microscopy. Complex structural features, including core-shell morphologies and intricate multiphase compositions within individual particles, are unveiled. An optimal Ca/O ratio of 1.30 produces particles with a coercivity up to μ 0 H c = 1.63 T, while higher Ca/O ratios induce the formation of a Sm-rich TbCu 7 -type (1: 7 ) phase, which only partially transforms into the desired 1:12 phase during annealing. Persistent remnants of the 1:7 phase locally impact atomic structure, particle morphology, and coercivity. Furthermore, these findings underscore the complex interplay between synthesis parameters, resulting structures, and magnetic properties, informing the design and optimization of high-performance permanent magnets comprised of the (1:12) compound.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Atomic Layer Deposition for Improved Biomass Conversion Catalysts

Heterogeneous catalysts are a key enabler of the transition towards a sustainable, bio-based economy for fuels and chemicals. However, the harsh conditions in many biomass conversion processes lead to nanoparticle sintering, support collapse, and metal leaching in conventional PGM catalysts. Next-generation catalysts must be developed to address these stability challenges. This presentation will discuss ongoing work between the Catalytic Carbon Transformation and Scale-Up Center at NREL and various industrial partners to develop scalable and cost-effective atomic layer deposition (ALD) coatings for improving the performance of biomass conversion catalysts. The substantial focus will be devoted to the benefits of TiO2 ALD coatings on supported Pd hydrogenation catalysts. Ten cycles of TiO2 ALD were found to dramatically improve the activity of a conventional Pd/Al2O3 catalyst towards aromatic hydrogenation, despite partial coverage of the Pd sites by the ALD layer. Subsequent advanced characterization and atomic-scale computational modeling revealed that the ALD coating weakened the adsorption strength of hydrogenation surface intermediates, leading to higher reaction rates. Reaction testing after exposure to sulfur impurities, high temperature oxidation, and hydrothermal treatment demonstrated the improved stability of the ALD-coated catalyst. Additionally, the ALD synthesis process was found to be scalable over two orders of magnitude with minimal deviation in synthesized catalyst properties. These results were contextualized with cost models of industrial ALD coating and aromatic hydrogenation processes to further refine the value proposition of ALD coatings. Given the demonstrated improvements in hydrogenation, TiO2 ALD coatings have also been applied to supported Pt catalysts for use in other biomass conversion reactions, such as hydrodeoxygenation for the production of sustainable aviation fuel (SAF) and the oxidation of glucose to bio-derived gluconic acid.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2021

Atomic Layer Deposition for Improved Biomass Conversion Catalysts

Heterogeneous catalysts are a key enabler of the transition towards a sustainable, bio-based economy for fuels and chemicals. However, the harsh conditions in many biomass conversion processes lead to nanoparticle sintering, support collapse, and metal leaching in conventional PGM catalysts. Next-generation catalysts must be developed to address these stability challenges. This presentation will discuss ongoing work between the Catalytic Carbon Transformation & Scale-Up Center at NREL and various industrial partners to develop scalable, cost-effective atomic layer deposition (ALD) coatings for improving the performance of biomass conversion catalysts. Substantial focus will be devoted to the benefits of TiO2 ALD coatings on supported Pd hydrogenation catalysts. Ten cycles of TiO2 ALD were found to dramatically improve the activity of a conventional Pd/Al2O3 catalyst towards aromatic hydrogenation, despite partial coverage of the Pd sites by the ALD layer. Subsequent advanced characterization and atomic-scale computational modeling revealed that the ALD coating influenced the adsorption strength of hydrogenation surface intermediates in unexpected ways, leading to higher reaction rates. Reaction testing after exposure to sulfur impurities, high temperature oxidation, and hydrothermal treatment demonstrated the improved stability of the ALD-coated catalyst. Additionally, the ALD synthesis process was found to be scalable over two orders of magnitude with minimal deviation in synthesized catalyst properties. These results were contextualized with cost models of industrial ALD coating and aromatic hydrogenation processes to further refine the value proposition of ALD coatings. Given the demonstrated improvements in hydrogenation, TiO2 ALD coatings have also been applied to supported Pt catalysts for use in other biomass conversion reactions, such as hydrodeoxygenation for production of sustainable aviation fuel (SAF) and the oxidation of glucose for bio-derived gluconic acid. Recent findings from these experimental campaigns will also be shared. ALD technology holds great potential in the development of next-generation catalysts for biofuels and bioproducts and this work constitutes an important examination of the impact of ALD coatings in a variety of reaction environments.

bioenergy↗

DOE OSTI2021

Atomic Layer Deposition for Improved Biomass Conversion Catalysts

atomic layer deposition↗

DOE OSTI2022

Unveiling mechanism of surface-guided platinum nanowire growth

We report surface-guided growth of non-planar nanowires on functional substrates offers the new opportunity to precisely control their diameter, length, density and alignment, which will greatly benefit their direct integration into practical devices for large-scale applications. However, control of noble metal nanowires growth and arrangement remains a great challenge, and the mechanistic understanding is still limited. Herein, we choose Pt as a model material system to study the synthesis conditions required to control the in situ growth of aligned Pt nanowires on flat titanium substrate via a one-step and room-temperature green chemical synthesis process in aqueous solution. Most importantly, it is for the first time discovered that ordered nanoarrays and self-assembled nanoflowers can be directly grown on flat Ti substrate by merely adjusting the reaction times, without use of any soft/hard templates, surfactants and organic solvents. The proposed surface-guided growth mechanisms for nanoarray and nanoflower formation in this study may shed light on understanding of oriented arrangement/assembly of one-dimensional Pt nanowires into desirable morphologies for a variety of practical device applications.

Pt nanoflower↗

DOE OSTI2022

PtRu Catalysts on Nitrogen-Doped Carbon Nanotubes with Conformal Hydrogenated TiO 2 Shells for Methanol Oxidation

The methanol oxidation reaction (MOR) is the limiting factor in direct methanol fuel cells (DMFC). There is an urgent need to improve the catalytic activity and stability of MOR catalysts. This study reports a highly active PtRu catalyst for MOR based on a hybrid multifunctional catalyst support consisting of a conformal amorphous hydrogenated TiO 2 shell wrapped around the oxygenated N-doped carbon nanotube core, denoted as PtRu/TiO 2 / ONCNT-400. Both the TiO 2 shell and the subsequent PtRu nanoparticles are deposited by a rapid microwave-assisted synthesis processes. The hydrogenated TiO 2 shell is found to exhibit a strong interaction with the deposited PtRu catalyst nanoparticles and effectively prevent them from agglomeration during the postdeposition thermal annealing to form more active crystalline PtRu alloy catalysts. In addition, the defective hydrogenated TiO 2 shell enhances the PtRu catalyst activity by the synergistic effects of partial charge transfer from TiO 2 to PtRu and high oxophilicity, which improves the kinetics of oxidation of poisonous CO intermediate to CO 2 . The mass activity for MOR and long-cycling stability of the PtRu/TiO 2 /ONCNT-400 catalyst surpass the two benchmark commercial PtRu/C catalysts from Johnson Matthey (JM) and Tanaka KiKinzoku (TKK), respectively. Furthermore, the results demonstrate that PtRu/TiO 2 /ONCNT-400 can serve as an efficient catalyst for MOR in DMFC.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Spatiotemporal Studies of Soluble Inorganic Nanostructures with X‐rays and Neutrons

Abstract This Review addresses the use of X‐ray and neutron scattering as well as X‐ray absorption to describe how inorganic nanostructured materials assemble, evolve, and function in solution. We first provide an overview of techniques and instrumentation (both large user facilities and benchtop). We review recent studies of soluble inorganic nanostructure assembly, covering the disciplines of materials synthesis, processes in nature, nuclear materials, and the widely applicable fundamental processes of hydrophobic interactions and ion pairing. Reviewed studies cover size regimes and length scales ranging from sub‐Ångström (coordination chemistry and ion pairing) to several nanometers (molecular clusters, i.e. polyoxometalates, polyoxocations, and metal‐organic polyhedra), to the mesoscale (supramolecular assembly processes). Reviewed studies predominantly exploit 1) SAXS/WAXS/SANS (small‐ and wide‐angle X‐ray or neutron scattering), 2) PDF (pair‐distribution function analysis of X‐ray total scattering), and 3) XANES and EXAFS (X‐ray absorption near‐edge structure and extended X‐ray absorption fine structure, respectively). While the scattering techniques provide structural information, X‐ray absorption yields the oxidation state in addition to the local coordination. Our goal for this Review is to provide information and inspiration for the inorganic/materials science communities that may benefit from elucidating the role of solution speciation in natural and synthetic processes.

Yin, Jia‐Fu↗

DOE OSTI2023

Spatiotemporal Studies of Soluble Inorganic Nanostructures with X‐rays and Neutrons

This Review addresses the use of X-ray and neutron scattering as well as X-ray absorption to describe how inorganic nanostructured materials assemble, evolve, and function in solution. We first provide an overview of techniques and instrumentation (both large user facilities and benchtop). We review recent studies of soluble inorganic nanostructure assembly, covering the disciplines of materials synthesis, processes in nature, nuclear materials, and the widely applicable fundamental processes of hydrophobic interactions and ion pairing. Reviewed studies cover size regimes and length scales ranging from sub-Ångström (coordination chemistry and ion pairing) to several nanometers (molecular clusters, i.e. polyoxometalates, polyoxocations, and metal-organic polyhedra), to the mesoscale (supramolecular assembly processes). Reviewed studies predominantly exploit 1) SAXS/WAXS/SANS (small- and wide-angle X-ray or neutron scattering), 2) PDF (pair-distribution function analysis of X-ray total scattering), and 3) XANES and EXAFS (X-ray absorption near-edge structure and extended X-ray absorption fine structure, respectively). While the scattering techniques provide structural information, X-ray absorption yields the oxidation state in addition to the local coordination. Our goal for this Review is to provide information and inspiration for the inorganic/materials science communities that may benefit from elucidating the role of solution speciation in natural and synthetic processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Sculpting the Plasmonic Responses of Nanoparticles by Directed Electron Beam Irradiation

Spatial confinement of matter in functional nanostructures has propelled these systems to the forefront of nanoscience, both as a playground for exotic physics and quantum phenomena and in multiple applications including plasmonics, optoelectronics, and sensing. In parallel, the emergence of monochromated electron energy loss spectroscopy (EELS) has enabled exploration of local nanoplasmonic functionalities within single nanoparticles and the collective response of nanoparticle assemblies, providing deep insight into associated mechanisms. However, modern synthesis processes for plasmonic nanostructures are often limited in the types of accessible geometry, and materials and are limited to spatial precisions on the order of tens of nm, precluding the direct exploration of critical aspects of the structure-property relationships. Here, the atomic-sized probe of the scanning transmission electron microscope is used to perform precise sculpting and design nanoparticle configurations. Using low-loss EELS, dynamic analyses of the evolution of the plasmonic response are provided. It is shown that within self-assembled systems of nanoparticles, individual nanoparticles can be selectively removed, reshaped, or patterned with nanometer-level resolution, effectively modifying the plasmonic response in both space and energy. This process significantly increases the scope for design possibilities and presents opportunities for unique structure development, which are ultimately the key for nanophotonic design.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Understanding Synthesis and Structural Variation of Nanomaterials Through In Situ/Operando XAS and SAXS

Nanostructured materials with high surface area and low coordinated atoms present distinct intrinsic properties from their bulk counterparts. However, nanomaterials' nucleation/growth mechanism during the synthesis process and the changes of the nanomaterials in the working state are still not thoroughly studied. As two indispensable methods, X-ray absorption spectroscopy (XAS) provides nanomaterials' electronic structure and coordination environment, while small-angle X-ray scattering (SAXS) offers structural properties and morphology information. Here, a combination of in situ/operando XAS and SAXS provides high temporal and spatial resolution to monitor the evolution of nanomaterials. This review gives a brief introduction to in situ/operando SAXS/XAS cells. In addition, the application of in situ/operando XAS and SAXS in preparing nanomaterials and studying changes of working nanomaterials are summarized.

25 ENERGY STORAGE↗

DOE OSTI2025

Effect of lithium diffusion into Ga 2 O 3 thin films

The integration of lithium based compounds (e.g., Li:NiO/Ga 2 O 3 , LiGa 5 O 8 /Ga 2 O 3 ) in Ga 2 O 3 based pn-heterojunctions raises concerns about interface stability, i.e., Li diffusion effects on Ga 2 O 3 properties. In this work the ex-situ diffusion of Li is investigated in three different Ga 2 O 3 epilayers systems [(001) κ-Ga 2 O 3 and (−201) β-Ga2O3 heteroepitaxy on (001) α-Al 2 O 3 , and (010) β-Ga 2 O 3 homoepitaxy] at relevant temperatures for the synthesis / processing of Li-based epilayers. It is here experimentally demonstrated and quantified the Li diffusion in all the investigated Ga 2 O 3 epilayers systems and Li bulk (D Li,bulk ) and 2D defects (D Li,2D ) diffusion coefficients are provided. In the case of the (010) β-Ga 2 O 3 homoepitaxial layer (nominally free of structural defects), hybrid functional theory calculations foresee a diffusion mechanism mediated by Ga vacancies (VGa). Moreover, in the (010) β-Ga 2 O 3 homo-layer a significant effect on its functional properties (e.g., additional Raman vibrational modes, induced conductivity in an otherwise insulating sample) upon the Li-diffusion process is experimentally highlighted and tentatively related to the passivation of acceptor defects (i.e., formation of V Ga -nLi complexes).

Defects↗