Mechanisms for superconductivity in the transition metals
Electron-phonon interaction superconductivity in transition metals
TRANSITION ELEMENT↗
SEARCH · Engineering Papers
Results for “Superconducting transition”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Superconducting properties of annealed Nb-Al-Ge thin films.
Discussion of the superconducting transition temperature and other superconducting properties of annealed Nb-Al-Ge thin films which were prepared by sputtering from a 3Nb-0.8Al-0.2Ge cathode. Annealing was performed in a high-vacuum environment maintained at 10 to the minus 9th torr or less, for times and temperatures near the optimum conditions for bulk Nb-Al-Ge. Films with transition temperatures from 12 to 16 K were annealed and in all cases a rise in transition temperature was observed, with the maximum value obtained thus far being 17.5 K. The current carrying capacity values, already substantially higher for unannealed thin films than for the bulk, were raised even further in the annealed samples, indicating that annealing has no detrimental effects on the flux pinning in these films.
Janocko, M. A.↗
Microwave properties of high transition temperature superconducting thin films
Extensive studies of the interaction of microwaves with YBa2Cu3O(7-delta), Bi-based, and Tl-based superconducting thin films deposited in several microwave substrates were performed. The data were obtained by measuring the microwave power transmitted through the film in the normal and the superconducting state and by resonant cavity techniques. The main motives were to qualify and understand the physical parameters such as the magnetic penetration depth, the complex conductivity, and the surface impedance, of high temperature superconducting (HTS) materials at microwave frequencies. Based on these parameters, the suitability of these HTS thin films is discussed for microwave applications.
Gordon, W. L.↗
Multicolor Detectors for Ultrasensitive Long-Wave Imaging Cameras
A document describes a zeptobolometer for ultrasensitive, long-wavelength sensors. GSFC is developing pixels based on the zeptobolometer design that sense three THz wavelengths simultaneously. Two innovations are described in the document: (1) a quasiparticle (QO) filter arrangement that enables a compact multicolor spectrum at the focal plane, and (2) a THz antenna readout by up to three bolometers. The innovations enable high efficiency by greatly reducing high, frequency-dependent microstrip losses, and pixel compactness by eliminating the need for bulky filters in the focal plane. The zeptobolometer is a small TES bolometer, on the scale of a few microns, which can be readily coupled through an impedance-matching resistor to a metal or dielectric antenna. The bolometer is voltage-biased in its superconducting transition, allowing the use of superconducting RF multiplexers to read out large arrays. The antenna is geometrically tapped at three locations so as to efficiently couple radiation of three distinct wavelengths to the individual TESs. The transition edge hot electrons in metals offer a simple, compact arrangement for antenna readout, which can be crucial in the THz where line losses at high frequencies can be substantial. A metallic grill filter acts as a high-pass filter and directs the low-frequency components to a location where they will be absorbed. The absorption spectrum shows that three well-separated THz bands are feasible. The filters can be made from high-purity dielectrics such as float zone silicon or sapphire.
Brown, Ari↗
Anisotropic field-induced changes in the superconducting order parameter of UTe 2
UTe 2 is a newly discovered unconventional superconductor, where electron Cooper pairs combine into a spin-triplet ground state. We study the specific heat C( H,T ) of a high-quality UTe 2 single crystal, with a single anomaly at a high superconducting transition temperature T c = 2.1 K and a low residual Sommerfeld coefficient γ 0 . Applying magnetic fields up to 12 T along the crystallographic axes a, b , and c , we observe highly anisotropic behavior in γ 0 ( H ). Below 4 T, γ 0 ( H ) ≈ γ 0 + λi √H (i = a, b, c) , which is expected for an unconventional superconductor with nodes on the Fermi surface away from the direction of the magnetic field. At 4 T ( a and b axes) and 5.5 T ( c axis), distinctive changes in the behavior of γ 0 (H) suggest that a stable low-field ground state begins to evolve above 4 T. The data analysis indicates that the nodes are located near the a–b plane, with possible order parameters d B2u + iεd B1u or d B2u + iεd Au . Our findings support B 2u as the primary superconducting order parameter in UTe 2 .
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Materials Development for Auxiliary Components for Large Compact Mo/Au TES Arrays
We describe our current fabrication process for arrays of superconducting transition edge sensor microcalorimeters, which incorporates superconducting Mo/Au bilayers and micromachined silicon structures. We focus on materials and integration methods for array heatsinking with our bilayer and micromachining processes. The thin superconducting molybdenum bottom layer strongly influences the superconducting behavior and overall film characteristics of our molybdenum/gold transition-edge sensors (TES). Concurrent with our successful TES microcalorimeter array development, we have started to investigate the thin film properties of molybdenum monolayers within a given phase space of several important process parameters. The monolayers are sputtered or electron-beam deposited exclusively on LPCVD silicon nitride coated silicon wafers. In our current bilayer process, molybdenum is electron-beam deposited at high wafer temperatures in excess of 500 degrees C. Identifying process parameters that yield high quality bilayers at a significantly lower temperature will increase options for incorporating process-sensitive auxiliary array components (AAC) such as array heat sinking and electrical interconnects into our overall device process. We are currently developing two competing technical approaches for heat sinking large compact TES microcalorimeter arrays. Our efforts to improve array heat sinking and mitigate thermal cross-talk between pixels include copper backside deposition on completed device chips and copper-filled micro-trenches surface-machined into wafers. In addition, we fabricated prototypes of copper through-wafer microvias as a potential way to read out the arrays. We present an overview on the results of our molybdenum monolayer study and its implications concerning our device fabrication. We discuss the design, fabrication process, and recent test results of our AAC development.
Finkbeiner, F. m.↗
Exploration of Geometric Noise Suppression in Transition Edge Sensors
We present noise data on Mo/Au superconducting transition edge sensors featuring the noise suppression geometry using normal metal bars transverse to the bias current. The effectiveness of the bars in far-infrared bolometers and x-ray microcalorimeters is evaluated. We have examined the effect of the resistivity of the superconducting bilayer on excess noise in bolometer devices. We have also studied the effect of bar density on energy resolution in x-ray devices. We address the question of whether the reduction is noise is necessarily coupled to a reduction in the effective transition sharpness. We propose a fabrication technique experiment to examine the dependence of alpha and noise suppression in similar transverse bar densities.
Chervenak, J. A.↗
Anomalous lattice relaxation dynamics in optimally doped La 2−𝑥 Sr 𝑥 CuO 4
The atomic lattice plays a critical role in the emergence of high-𝑇 𝑐 superconductivity in cuprates. While the dynamics associated with electron-lattice coupling typically unfold on picosecond-to-femtosecond timescales, we present an x-ray photon correlation spectroscopy investigation on an optimally doped La-based cuprate that reveals a strong response of kilosecond-scale lattice relaxation dynamics to the superconducting state. Notably, an anomaly emerges around 𝑇 𝑐 : upon cooling into the superconducting state, the average atomic relaxation lifetime decreases, i.e., dynamics accelerate. This indicates a significant change in the local disorder-induced strain field dynamics at the superconducting transition, highlighting a remarkable coupling between superconductivity and the lattice on quasistatic timescales.
Petsch, A. N. [SLAC National Accelerator Laborator↗
Study of deposition of YBa2Cu3O7-x on cubic zirconia
Films of YBa2Cu3O7-x were grown on (100) cubic zirconia with 8 percent yttria by laser ablation from sintered targets of YBa2Cu3O7-x. The temperature of the zirconia substrate during growth was varied between 700 and 780 C. The atmosphere during growth was 170 mtorr of O2. The films were subsequently slowly cooled in-situ in 1 atm of O2. The best films were c-axis aligned and had a transition temperature of 87.7 K. The superconducting transition temperature and the X-ray diffraction analysis is reported as a function of the substrate temperature and of the angle between the laser beam and the target's normal.
Warner, Joseph D.↗
NASA Space applications of high-temperature superconductors
The application of superconducting technology in space has been limited by the requirement of cooling to near liquid helium temperatures. The only means of obtaining these temperatures has been with cryogenic fluids which severely limit mission lifetime. The development of materials with superconducting transition temperatures above 77 K has made superconducting technology more attractive and feasible for employment in aerospace systems. Here, potential applications of high temperature superconducting technology in cryocoolers, remote sensing, communications, and power systems are discussed.
Heinen, Vernon O.↗
Hund's coupling assisted orbital-selective superconductivity in Ba1-xKxFe2As2
While the superconducting transition temperature of hole-doped Ba_{1-x}K_{x}Fe_{2}As_{2} decreases past optimal doping, superconductivity does not completely disappear even for the fully doped KFe_{2}As_{2} compound. In fact, superconductivity is robust through a Lifshitz transition where electron bands become hole-like around the zone corner at around x=0.7, thus challenging the conventional understanding of superconductivity in iron-based systems. High-resolution angle-resolved photoemission spectroscopy is used to investigate the superconducting gap structure, as well as the normal state electronic structure, around optimal doping and across the Lifshitz transition. Our findings reveal a largely orbital-dependent superconducting gap structure, where the more strongly correlated d_{xy} band has a vanishing superconducting gap at higher doping, aligning with the Hund's metal behavior observed in the normal state. Notably, the superconducting gap on the d_{xy} band disappears before the Lifshitz transition, suggesting that the Fermi surface topology may play a secondary role. We discuss how these results point to orbital-selective superconducting pairing and how strong correlations via Hund's coupling may shape superconducting gap structures in iron-based and other multiorbital superconductors.
FOS: Physical sciences↗
Fabrication and Performance of Large Format Transition Edge Sensor Microcalorimeter Arrays
We have produced a variety of superconducting transition edge sensor array designs for microcalorimetric detection of x-rays. Designs include kilopixel scale arrays of relatively small sensors (~75 micron pitch) atop a thick metal heatsinking layer as well as arrays of membrane-isolated devices on 250 micron pitch and smaller arrays of devices up to 600 micron pitch. We discuss the fabrication techniques used for each type of array focusing on unique aspects where processes vary to achieve the particular designs and required device parameters. For example, we evaluate various material combinations in the production of the thick metal heatsinking, including superconducting and normal metal adhesion layers. We also evaluate the impact of added heatsinking on the membrane isolated devices as it relates to basic device parameters. Arrays can be characterized with a time division SQUID multiplexer such that greater than 10 devices from an array can be measured in the same cooldown. Device parameters can be measured simultaneously so that environmental events such as thermal drifts or changes in magnetic fields can be controlled. For some designs, we will evaluate the uniformity of parameters impacting the intrinsic performance of the microcalorimeters under bias in these arrays and assess the level of thermal crosstalk.
Chervenak, James A.↗
Large Format Transition Edge Sensor Microcalorimeter Arrays
We have produced a variety of superconducting transition edge sensor array designs for microcalorimetric detection of x-rays. Designs include kilopixel scale arrays of relatively small sensors (approximately 75 micron pitch) atop a thick metal heat sinking layer as well as arrays of membrane-isolated devices on 250 micron and up to 600 micron pitch. We discuss fabrication and performance of microstripline wiring at the small scales achieved to date. We also address fabrication issues with reduction of absorber contact area in small devices.
Chervenak, J. A.↗
Performance of Large Format Transition Edge Sensor Microcalorimeter Arrays
We have produced a variety of superconducting transition edge sensor array designs for microcalorimetric detection of x-rays. Arrays are characterized with a time division SQUID multiplexer such that greater than 10 devices from an array can be measured in the same cooldown. Designs include kilo pixel scale arrays of relatively small sensors (-75 micron pitch) atop a thick metal heatsinking layer as well as arrays of membrane-isolated devices on 250 micron and up to 600 micron pitch. We discuss fabrication and performance of microstripline wiring at the small scales achieved to date. We also address fabrication issues with reduction of absorber contact area in small devices.
Chervenak, J. A.↗
Epitaxial aluminum layer on antimonide heterostructures for exploring Josephson junction effects
In this study, we present results of our recent work of epitaxially-grown aluminum (epi-Al) on antimonide heterostructures, where the epi-Al thin film is grown at either room temperature or below zero °C. A sharp superconducting transition at T ∼ 1.3 K is observed in these epi-Al films. We further show that supercurrent states are realized in Josephson junctions fabricated in the epi-Al/antimonide heterostructures with mobility μ ∼ 1.0 × 10 6 cm 2 /Vs. These results clearly demonstrate we have achieved growing high-quality epi-Al/antimonide heterostructures, a promising platform for the exploration of Josephson junction effects for quantum information science and microelectronics applications.
Antimonide heterostructures↗
Superconducting Detector Arrays for Astrophysics
The next generation of astrophysics instruments will feature an order of magnitude more photon sensors or sensors that have an order of magnitude greater sensitivity. Since detector noise scales with temperature, a number of candidate technologies have been developed that use the intrinsic advantages of detector systems that operate below 1 Kelvin. Many of these systems employ of the superconducting phenomena that occur in metals at these temperatures to build ultrasensitive detectors and low-noise, low-power readout architectures. I will present one such system in use today to meet the needs of the astrophysics community at millimeter and x-ray wavelengths. Our group at NASA in collaboration with Princeton, NIST, Boulder and a number of other groups is building large format arrays of superconducting transition edge sensors (TES) read out with multiplexed superconducting quantum interference devices (SQUID). I will present the high sensitivity we have achieved in multiplexed x-ray sensors with the TES technology and describe the construction of a 1000-sensor TES/SQUID array for microwave measurements. With our collaboration's deployment of a kilopixel TES array for 2 mm radiation at the Atacarna Cosmology Telescope in November 2007, we have first images of the lensed Cosmic Microwave Background at fine angular scales.
Chervenak, James↗
Antenna-coupled transition edge polarization-sensitive bolometer arrays
We have fabricated antenna-coupled superconducting transition edge sensor (TES) arrays for far-infrared and millimeter-wave applications.
bolometer TES antenna-coupled array↗
Simple Superconducting "Permanent" Electromagnet
Proposed short tube of high-temperature-superconducting material like YBa2Cu3O7 acts as strong electromagnet that flows as long as magnetic field remains below critical value and temperature of cylinder maintained sufficiently below superconducting-transition temperature. Design exploits maximally anisotropy of high-temperature-superconducting material.
Israelson, Ulf E.↗