SEARCH · Engineering Papers

Results for “High pressure X-ray diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Effect of Preparation Conditions of Fe@SiO2 Catalyst on Its Structure Using High-Pressure Activity Studies in a 3D-Printed SS Microreactor

Fischer–Tropsch synthesis (FTS) in a 3D-printed stainless steel (SS) microchannel microreactor was investigated using Fe@SiO2 catalysts. The catalysts were prepared by two different techniques: one pot (OP) and autoclave (AC). The mesoporous structure of the two catalysts, Fe@SiO2 (OP) and Fe@SiO2 (AC), ensured a large contact area between the reactants and the catalyst. They were characterized by N2 physisorption, H2 temperature-programmed reduction (H2-TPR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron microscopy (XPS), and thermogravimetric analysis–differential scanning calorimetry (TGA-DSC) techniques. The AC catalyst had a clear core–shell structure and showed a much greater surface area than that prepared by the OP method. The activities of the catalysts in terms of FTS were studied in the 200–350 °C temperature range at 20-bar pressure with a H2/CO molar ratio of 2:1. The Fe@SiO2 (AC) catalyst showed higher selectivity and higher CO conversion to olefins than Fe@SiO2 (OP). Stability studies of both catalysts were carried out for 30 h at 320 °C at 20 bar with a feed gas molar ratio of 2:1. The Fe@SiO2 (AC) catalyst showed higher stability and yielded consistent CO conversion compared to the Fe@SiO2 (OP) catalyst.

Biochemistry & Molecular Biology↗

DOE OSTI2026

Hyperspectral radiance mapping and chromatic correction for temperature measurement in laser-heated diamond anvil cells

In laser-heated diamond anvil cell (DAC) experiments, the effective heated region typically decreases in size with increasing pressure, leading to steeper thermal gradients. Under these conditions, chromatic aberration in the optical path from sample to detector can significantly create bias in spectro-radiometric temperature measurement. We present a radiance-mapping approach using a hyperspectral camera that records 25 spectral channels spanning 605–875 nm at each pixel in a single exposure, providing spatially and spectrally resolved radiance in each frame. This enables chromatic effects to be recorded and corrected in data processing. We developed a procedure for hyperspectral mapping, involving per-camera calibration, crosstalk removal, measured spectral throughput functions, and optional sub-pixel co-registration to minimize chromatic distortion. The calibrated radiance maps are then used to derive temperature maps of the laser-heated hotspots. For smaller heating spots, the radiance mapping approach reveals chromatic shifts that conventional spectro-radiometric methods cannot quantify. Ambient-pressure heating experiments confirm accurate temperature retrieval. At high pressure, application of the hyperspectral system to a platinum-heating experiment at 12 GPa demonstrates stable temperature reconstruction under steep thermal gradients. Beyond mitigating chromatic aberrations, the ability to diagnose optical artifacts separately from emissivity variations during controlled test experiments or in situ suggests a path toward more rigorous spectral emissivity analysis and improved modeling of thermal transport in laser-heated DAC experiments.

47 OTHER INSTRUMENTATION↗

DOE OSTI2025

Defect-Driven Redox Interplay on Anatase TiO 2 : Surface-Structure Dependent Activation for CO 2 Hydrogenation Catalysis

Titanium dioxide (TiO 2 ) is one of the most extensively studied oxides as an active catalyst or catalyst support, particularly in energy and environmental applications, but the atomistic mechanisms governing its dynamic response to reactive environments and their correlation to reactivity remain largely elusive. Using in situ environmental transmission electron microscopy (ETEM), synchrotron X-ray diffraction (XRD), ambient-pressure X-ray photoelectron spectroscopy (AP-XPS), temperature-programmed reduction (TPR), reactivity measurements, and theoretical modeling, we reveal the dynamic interplay between oxygen loss and replenishment of anatase TiO 2 under varying reactive conditions. Under H 2 exposure, anatase TiO 2 undergoes surface reduction via lattice oxygen loss, forming Ti 3 O 5 . In contrast, CO 2 exposure induces oxygen replenishment, reversing stoichiometry. In mixed H2/CO 2 environments, the reverse water–gas shift (RWGS) reaction proceeds selectively on stepped and high-indexed TiO 2 surfaces, whereas the thermodynamically stable TiO 2 (101) surface remains inactive and intact. Critically, H 2 pretreatment generates oxygen vacancies on TiO 2 (101), transforming it into an active Ti 3 O 5 or defect-rich surface that catalyzes RWGS. By correlating surface structure, defect dynamics, and gas-phase interactions, this work deciphers the competition between H 2 -driven reduction and CO 2 -driven oxidation pathways at the atomic scale. Furthermore, these insights establish defect engineering as a strategic lever to activate inert TiO 2 facets, advancing the design of adaptive catalysts for sustainable fuel synthesis technologies.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Epitaxial stabilization and oxygen vacancy control of EuNiO 3 thin films

Rare-earth nickelates exhibit valuable behavior for neuromorphic computing at low temperature: Building blocks for biologically inspired microelectronic neurons like electrically driven insulator–metal transitions (IMTs), negative differential resistance, and self-oscillations have been shown up to 230 K for SmNiO 3 and NdNiO 3 . EuNiO 3 raises the IMT far above room temperature (460 K) but high-quality thin films are challenging to synthesize. Here, we explore the epitaxial stabilization of EuNiO 3 using pulsed laser deposition. X-ray diffraction reciprocal space maps, x-ray absorption spectroscopy, and transmission electron microscopy show that higher growth temperature (800 °C) reduces oxygen vacancy concentrations in EuNiO 3 . Pseudomorphic EuNiO 3 is demonstrated on both SrLaAlO 4 and NdGaO 3 substrates, and LaNiO 3 buffer layers are incorporated to facilitate future vertical device fabrication. In contrast to bulk thermodynamic predictions, the greater oxidation and crystallinity at higher temperature we observe indicates that epitaxial substrates can stabilize EuNiO 3 at O 2 pressures less than 1 atm.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2026

Insights on carbon dioxide adsorption in a flexible 1-D coordination polymer from in situ X-ray scattering and density functional theory

A combination of in situ small-angle X-ray scattering (SAXS) microstructure characterization over scales ranging from 1 nm to 10 µm and powder X-ray diffraction (XRD) structure characterization under various gas/pressure/temperature conditions with density functional theory (DFT) calculations provides new insights for the CO2 sorption behavior of a one-dimensional porous coordination polymer: catena-bis(dibenzoylmethanato)(4,4′-bipyridyl)nickel(II), denoted NiDBM-Bpy. The NiDBM-Bpy chains are held together by van der Waals forces, but the structure of guest-free NiDBM-Bpy is unsolved due to a lack of suitable crystals and high-quality powder XRD patterns. Nevertheless, SAXS and powder XRD can follow microstructural and structural changes as a function of gas pressure, composition and temperature. Both mixed-gas flow and static supercritical CO2 regimes are explored experimentally. DFT calculations are used to model the structural variation associated with XRD changes and hysteresis in the sorption isotherms. XRD and DFT calculations suggest that an orthorhombic Fddd structure with two CO2 per Ni emerges following a transition from the structure with lower molar volume and symmetry that exists without CO2 present.

Allen, Andrew J.↗

DOE OSTI2026

Demonstration of a diamond anvil cell platform at the Linac Coherent Light Source: Capabilities and Outlook

A novel x-ray free electron laser (XFEL) diffraction setup for use with diamond anvil cells (DACs) at the Linac Coherent Light Source (LCLS) is described. Using the new diamond window at the Matter at Extreme Conditions (MEC) instrument, it allows hard x-ray experiments on DACs to be performed in air. The platform is described along with alignment and calibration procedures and details of the x-ray beam and diagnostics. Example data are presented, including a reversible XFEL induced phase transition in CsPbI3. The DAC setup was commissioned at MEC, but is applicable to most LCLS instruments where the unique pulse structures available at LCLS offer access to new ultrafast experimental techniques at high pressure.

Diamond Anvil Cells, LCLS, XFEL, High-Pressure↗

DOE OSTI2025

Single-Electron Transfer Stabilizes Metastable Alane in a Bipyridine-Functionalized MOF Nanopore

Nanoconfinement of metastable hydrides such as alane (AlH 3 ) in functionalized porous frameworks represents a promising yet largely untapped strategy for high-capacity energy storage. Despite its potential, the underlying mechanisms responsible for the thermodynamic stabilization of metastable hydrides are poorly understood. Here, in this study, concepts from solution Lewis acid–base chemistry were applied to a crystalline metal–organic framework (MOF) to stabilize AlH 3 . The long-range order and synthetically versatile pore chemistry enabled us to reveal the intimate details of the hydride-host interactions. Powder X-ray diffraction (PXRD) of AlH 3 -infiltrated UiO-67bpy (Zr 6 O 4 (OH) 4 (bpydc) 6 ; bpydc 2– = 2,2′-bipyridine-5,5′-dicarboxylate) confirms that the framework maintains its crystallinity up to 250 °C and is stable under 70 MPa H 2 pressure. We find that thermodynamic stabilization arises from coupled single-electron and hydrogen-atom transfer from AlH 3 to bipyridine-containing linkers. Electron paramagnetic resonance detects a bipyridyl radical with an anisotropic g-tensor (g values of 2.00132, 2.00215, and 2.00275), consistent with Bader charge analysis predicting 0.82 e – transferred from the hydride to the MOF. These findings establish critical structure–property relationships underpinning AlH 3 stabilization and suggest general strategies for tuning the thermodynamics and kinetics of metastable materials.

Shivanna, Mohana [Sandia National Laboratories (SN↗

DOE OSTI2025

Renewable Activated Carbon Sorbent for the Desulfurization of Liquid Fuels

In recent years, significant efforts have been devoted to the reduction of sulfur levels in transportation fuels in order to reach regulatory limits and reduce the emission of harmful SO x into the atmosphere. In particular, adsorptive desulfurization (ADS) has the potential to produce zero-sulfur fuels without the need for a high energy intensity process, high H 2 pressure, and long process times as in the case of other technologies such as hydrodesulfurization. In this work, we have demonstrated the effectiveness of renewable activated carbons derived from food waste (FWAC) for the ADS of model jet and diesel fuels. The optimal FWAC materials were those fabricated to maximize the micropore volume, providing available sites for the adsorption of dibenzothiophene (DBT) and dimethyldibenzothiophene (DMDBT). The FWAC had a greater sulfur adsorption capacity than commercial AC, Y zeolite sorbents, and AC derived from other biomass sources including miscanthus, coconut shell, and walnut shell. Elemental analysis suggests that the inorganic impurities inherent in food waste, notably K, Ca, P, and Na, may contribute to its improved sulfur adsorption compared to other AC materials. Microscopy and X-ray diffraction studies further demonstrated the presence of inorganic species on FWAC that may provide active sites for the chemisorption of sulfur molecules.

Adsorption↗

DOE OSTI2026

Pressure-tuned plethora of ferroelectric phases in CuInP 2 S 6

Layered chalcogenides like CuInP 2 S 6 are room temperature ferroelectrics. Modest compression even increases the electric polarization, raising questions about the origin of this unusual trend and other properties under pressure. In this work, we combine synchrotron-based infrared and Raman scattering spectroscopies, x-ray diffraction, and resistivity measurements with first-principles calculations of the lattice dynamics and energy landscape to unravel the influence of pressure on symmetry, polarization, and metallicity. We uncover a remarkable series of phase transitions across a series of polar space groups: monoclinic Cc → trigonal P31c (prismatic sulfur) → P31c (octahedral sulfur). True metallicity develops above 63 GPa, significantly higher than in related MPS 3 materials (M = Mn, Co, Fe, Ni), offering a picture of competing states of matter that is different than previously supposed. Detailed examination of pressure trends within the Cc phase also reveals phonon lifetime changes and streaking of satellite x-ray peaks that correlate with the maximum polarization. We discuss these tendencies in terms of Cu + ion migration, phase formation, and the overall energy landscape. Our findings place the high pressure behavior of CuInP 2 S 6 on a firm foundation and pave the way for the development of structure-property relations in this family of complex chalcogenides.

ferroelectric phases↗

DOE OSTI2025

Magnetoelastic-coupling-assisted first-order antiferromagnetic transitions in the corrugated honeycomb-lattice compounds (Ca, Sr) ⁢Mn 2 ⁢ P 2

Understanding the origin of unconventional magnetic order is a central theme in the research field of functional quantum materials for spin-dependent applications. In general, a paramagnetic (PM) to antiferromagnetic (AFM) transition is of thermodynamically second order in nature in the absence of a magnetic field. In the magnetically frustrated corrugated-honeycomb lattice compounds (Ca, Sr) ⁢Mn 2 ⁢ P 2 , electrical resistivity 𝜌 measurements in the 𝑎⁢𝑏 plane are reported to exhibit sharp discontinuities at the respective PM to AFM ordering temperatures 𝑇 N = 69.5 and 53 K, respectively, signifying the unusual first-order nature of the AFM transition. To reveal the origin of such anomalous transitions, high-resolution linear thermal-expansion measurements are reported for both CaMn 2 ⁢P 2 and SrMn 2 ⁢ P 2 in the 𝑎⁢𝑏 plane and along the 𝑐 axis using capacitance dilatometry. The thermal expansion measurements show a sharp discontinuity in Δ⁢𝐿/𝐿 at 𝑇 N , yielding a diverging behavior in the thermal expansion coefficient 𝛼⁡(𝑇) associated with strong magnetoelastic coupling, driving the first-order AFM transition in CaMn 2 ⁢P 2 . However, this effect is weaker in SrMn 2 ⁢P 2 , consistent with the magnetic entropy changes 𝑆⁡(𝑇) obtained from the heat-capacity measurements. Temperature-dependent 𝑎⁢𝑏-plane x-ray diffraction measurements for CaMn 2 ⁢ P 2 near its 𝑇 N yield a volume thermal expansion coefficient consistent with literature data for other materials. The uniaxial pressure derivatives of 𝑇 N in the two compounds are found to be respectively opposite in sign, presumably due to the different magnetic structures.

Pakhira, Santanu [Maulana Azad National Institute ↗

DOE OSTI2026

Growth-controlled twinning and magnetic anisotropy in CeSb 2

Cerium diantimonide (CeSb 2 ) is a layered heavy-fermion Kondo lattice material that hosts complex magnetism and pressure-induced superconductivity. The interpretation of its in-plane anisotropy has remained unsettled due to structural twinning, which superimposes orthogonal magnetic responses. Here, in this study, we combine controlled crystal growth with magnetization and rotational magnetometry to disentangle the effects of twinning. Nearly untwinned high-quality single crystals reveal the intrinsic in-plane anisotropy: The in-plane easy axis saturates at 𝑀 easy ⁡(4 T) ≈ 1.8 𝜇 B /Ce, while the in-plane hard axis magnetization is strongly suppressed, nearly linear, and comparable to the out-of-plane response. These results resolve long-standing discrepancies in reported magnetic measurements, in which in-plane metamagnetic transition fields and saturation magnetization varied significantly across previous studies. Growth experiments demonstrate that avoiding the proposed 𝛼 𝛽 structural transition—through Sb-rich flux and slower cooling—systematically reduces twinning. However, powder x-ray diffraction and differential thermal analysis measurements show no clear evidence of a distinct 𝛽 phase. Our results establish a consistent magnetic phase diagram and provide essential constraints for crystal-electric field models, enabling a clearer understanding of the interplay between anisotropic magnetism and unconventional superconductivity in CeSb 2 .

Weber, Jan T. [Goethe University, Frankfurt (Germa↗

DOE OSTI2025

Cold-Sprayed NMC622 Composite as a Cathode for Lithium-Ion Batteries

The growing demand for high-energy, low-cost lithium-ion batteries (LIBs) to power electric vehicles (EVs) necessitates advances in both materials and manufacturing processes. Conventional cathode fabrication methods, such as slurry casting and drying, are energy-intensive and pose challenges for scalability and environmental compliance. In this study, we propose cold-spray (CS) deposition as a solvent-free approach for fabricating LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) composite cathodes. Powder blends of NMC622, poly(vinylidene fluoride) (PVDF), and carbon black (CB) are directly deposited onto stainless steel and Inconel substrates under varied gas temperatures, pressures (and thus velocities), and standoff distances. The effects of temperature on the deposit morphology, coating density, and volume are systematically investigated. Computational fluid dynamics simulations reveal that increasing the gas temperature enhances the particle velocity, narrows the spray angle, and reduces the mass concentration radially at the nozzle outlet. CS deposition results in a dense cathode microstructure, accompanied by fracture in polycrystalline NMC622 particles. X-ray diffraction analysis further verifies that there are no phase changes during the deposition process. The electrochemical performance of the cold-sprayed cathodes reveals an initial capacity of approximately 96 mAh g –1 for single-crystal NMC622 and 167 mAh g –1 for polycrystalline NMC622. While these values are modest compared to state-of-the-art slurry-cast cathodes, which typically exhibit 180–200 mAh g –1 under optimized conditions. The results demonstrate a competitive performance given the solvent-free nature of the CS process and compare favorably with tape-cast samples made from identical feedstock. In conclusion, he CS process enables the formation of dense, binder-integrated cathode coatings without the need for solvent processing, offering a promising pathway for scalable, energy-efficient dry electrode manufacturing of next-generation LIBs.

Batteries↗

DOE OSTI2026

Postirradiation Examination of WIRE-21 Experiment Irradiated in the High Flux Isotope Reactor

Westinghouse Electric Company is developing wireless sensors to monitor the centerline temperature and internal pressure of commercial light-water reactor fuel rods during irradiation. Oak Ridge National Laboratory and Westinghouse Electric Company developed the Wireless Instrumented RB Experiment 2021 (WIRE-21) to test wireless temperature and pressure sensor technologies in a removable beryllium position in the High Flux Isotope Reactor. The experiment was irradiated for a total of 75 days, at temperatures ranging from approximately 150°C to 400°C, resulting in a peak fast (energy > 0.1 MeV) neutron fluence of about 3 × 10 21 n/cm 2 . The temperature was intentionally cycled multiple times to compare the response of the wireless temperature sensor to collocated thermocouples. Similarly, the pressure sensor was actuated in multiple steps to compare the response of the wireless measurement to excore pressure transducers (Petrie et al., 2023). After irradiation, the experiment was disassembled in the Irradiated Fuels Examination Laboratory (IFEL) hot cell at Oak Ridge National Laboratory with the intent to recover sensor and dosimetry components, document the as-irradiated condition of the hardware, and investigate possible causes of the sensor behavior observed during irradiation. The postirradiation examination successfully recovered and preserved key WIRE-21 components. After the housing was removed using a milling machine, the internal experiment sections were examined. All eight fiber-optic sensors were recovered, cut, and stored. The silicon carbide thermometry, temperature sensor, pressure sensor, lower spacer, and selected pressure and temperature cable sections were also removed and stored. The metal bellows of the pressure sensor was found to be plastically deformed, indicating that it had been properly pressurized during irradiation and generally behaved as expected. X-ray diffraction analysis of a section of one of the irradiated inductor cores within the pressure sensor was performed and confirmed the presence of phase-pure alpha ferrite (i.e., no unexpected phase transformations). Inductance testing was performed on the irradiated pressure sensor cores using an unirradiated test coil, and DC resistance measurements of the transceiver coils were also performed. The measurements with irradiated inductor cores assembled inside unirradiated coils showed slightly reduced inductance compared to measurements made with unirradiated cores, but the difference was not sufficient to explain the more significant reductions in inductance that were observed in-pile. Therefore, it is suspected that degradation of the inductor coils (specifically the wire wrapping) is responsible for the reduced inductance observed in-pile.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2026

Pressure-Induced Chemical Bonding Effects on Lattice and Magnetic Instabilities in Antiferromagnetic Insulating CaMn 2 Sb 2

Exotic quantum phenomena often emerge near an electronic delocalization transition (EDT) from an antiferromagnetic insulating phase to a strongly correlated metallic state under pressure. We report the pressure-induced structural and magnetic evolution of the antiferromagnetic insulator CaMn 2 Sb 2 . Single-crystal X-ray diffraction reveals a first-order phase transition near 5.4 GPa from a trigonal P-3m1 structure to a monoclinic P2 1 /m phase accompanied by a ∼7% volume collapse. Residual electron density analysis at intermediate pressures reveals charge localization along Mn–Sb chains, signaling electronic instability preceding the structural transition. Bonding analysis indicates anisotropic Mn–Sb orbital reconfiguration under pressure, driving a distorted square-pyramidal geometry. Neutron scattering confirms the transition and identifies a pressure-induced incommensurate magnetic order, distinct from the ambient antiferromagnetic state. In the monoclinic phase, zigzag Mn chains exhibit antiferromagnetic coupling along the ac-plane, enabled by enhanced orbital overlap. These results establish CaMn 2 Sb 2 as a model system for studying the coupling of structural distortion, charge redistribution, and magnetic order in layered Mn pnictides under pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Ammonolysis with N 2 -diluted NH 3 suppresses Ta( IV ) defects in BaTaO 2 N and enhances photocatalytic water oxidation

BaTaO 2 N stands out among oxynitride photocatalysts because of its ability to capture visible light and to drive the photoelectrochemical water oxidation reaction. However, its solar energy conversion performance is limited by electron–hole recombination at Ta( IV ) defects in the material. These defects are formed by overreduction of the Ta(v) oxide precursor by excess ammonia under the high temperature conditions during ammonolysis. Here we show for the first time that Ta( IV ) defect concentrations can be lowered by conducting the ammonolysis reaction in mixed NH 3 /N 2 gas. The obtained BaTaO 2 N samples crystallize in the cubic CaTiO 3 structure type and form 200–300 nm faceted nanocrystals, based on X-ray diffraction, scanning electron microscopy, and HRTEM. Electron paramagnetic resonance spectra observe the Ta( IV ) defects at g = 1.999 and confirm an 11-fold reduction for the product synthesized in mixed (0.13 : 1.0 vol) NH 3 /N 2 gas, equivalent to 1.14 × 10 16 cm −3 Ta( IV ) ions. This optimized BaTaO 2 N has nearly twice the photocatalytic oxygen evolution activity (AQE of 6.78% at 400 nm) of a reference material made with 1.0 atm ammonia and 78% higher photoelectrochemical water oxidation photocurrent (0.9 mA cm −2 at 1.23 V vs. RHE) under simulated sunlight. According to X-ray photoelectron spectroscopy, remaining Ta( IV ) defects are concentrated in the surface region of the BaTaO 2 N particles, where >50% of all Ta ions are found in the +4 oxidation state. This surface Ta( IV ) population can be directly observed in Vibrating Kelvin Probe Surface Photovoltage Spectra (VK-SPV) via its 1.2–1.4 eV photovoltage onset. Here, it suggests that the surface Ta( IV ) ions contribute empty d-states 0.5–0.7 eV below the BaTaO 2 N conduction band edge. These findings highlight how the energetics and concentrations of Ta( IV ) defects influence the photoelectrochemical water oxidation ability of BaTaO 2 N. Additionally, the work establishes ammonolysis with diluted NH 3 as a new tool to minimize defects in BaTaO 2 N and to raise its solar energy conversion efficiency toward its theoretical limit. Because of its simplicity, the reduced ammonia pressure strategy will likely be applicable to other oxynitrides, which generally suffer from overreduction problems during ammonolysis.

Salmanion, Mahya [University of California, Davis,↗

DOE OSTI2025

Influence of Compositional Complexity on Amorphization Resistance of Swift Heavy Ion Irradiated Titanate Pyrochlores

Compositionally complex oxides have garnered attention recently for their potential technological applications in harsh environments such as thermal barrier coatings and nuclear waste forms. Therefore, their response to extreme conditions, including high temperature and intense irradiation fields, must be thoroughly investigated. Here, the structural evolution of two pyrochlore oxides with comparable cation size ratio, r A /r B , (Yb 0.2 Er 0.2 Dy 0.2 Tb 0.2 Gd 0.2 ) 2 Ti 2 O 7 and Ho 2 Ti 2 O 7 , was evaluated after irradiation with 946 MeV Au ions up to a fluence of 8 × 10 12 ions/cm2 using synchrotron X-ray diffraction, transmission electron microscopy, and Raman spectroscopy. The overall radiation response is comparable for both titanate oxides and is dominated by a loss of crystallinity. When compared to a series of conventional titanate pyrochlore compositions, the amorphous track diameter of (Yb 0.2 Er 0.2 Dy 0.2 Tb 0.2 Gd 0.2 ) 2 Ti 2 O 7 is slightly larger than that of Ho2Ti2O7 and more in line with the diameter of the endmember with the maximum A-site cation size (Gd 2 Ti 2 O 7 ). Density functional theory calculations suggest that this behavior may be linked to local lattice distortions and the associated energetics of cation antisite formation. TEM and Raman analyses show that a disordered, crystalline shell surrounds the amorphous ion tracks in (Yb 0.2 Er 0.2 Dy 0.2 Tb 0.2 Gd 0.2 ) 2 Ti 2 O 7 , and the corresponding short-range structure resembles a weberite-type atomic arrangement.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Thermodynamic origin of the pressure-induced Invar effect: General criterion and experimental study of Fe 68 ⁢Pd 32

Synchrotron X-ray diffraction measurements were performed on 57 Fe 68 Pd 32 at multiple pressures and two temperatures in a diamond-anvil cell. Between 4 and 11GPa, the thermal expansion was zero or slightly negative. This pressure-induced Invar effect was studied further with 57 Fe nuclear forward scattering and nuclear resonant inelastic X-ray scattering to obtain information on the pressure-induced changes in both the magnetization and the phonon density of states. Magnetic entropy and phonon entropy were obtained from these results, the latter with additional measurements from inelastic neutron scattering to account for the contributions from Pd atoms. The dependencies of these entropies on pressure gave the magnetic and phonon contributions to thermal expansion. These canceled in the region of pressure-induced Invar behavior, even though they individually increased by more than a factor of 2 below the Curie pressure. The behavior of phonons gives evidence for spin-phonon interactions in Fe 68 Pd 32 . A general explanation of the pressure-induced Invar effect is presented, showing that Invar behavior is typically expected at a pressure P* below a magnetic transition at pressure PC. The difference in pressure P C − P* scales with the fractional reduction in magnetic exchange interaction divided by the average Gr¨uneisen parameter.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2025

Effect of pressure cycling and compression rate on the bcc-hcp transition in an FeNi alloy

Here, we investigate the body-centered cubic (bcc) to hexagonal close-packed (hcp) phase transition in Fe-10wt. %Ni alloy, combining pressure cycling and fast compression with time-resolved synchrotron x-ray diffraction in a dynamic diamond anvil cell. Three pressure cycles were conducted with compression rates ranging from 0.1 to nearly 10 3 GPa/s. During the first cycle with the slowest compression, the observed orientations in the bcc and hcp phases are consistent with the Burgers mechanism, followed by c-axis rotation of the hcp phase consistent with {$10$ $\bar{1}2$} twinning. During the following cycles with fast compression at 10 2 –10 3 GPa/s, the hcp phase exhibits negligible c-axis rotation with a nearly constant c/a ratio of ∼1.61 up to ∼30 GPa, indicating suppression of plastic deformation (especially, twinning) due to sample confinement from the gasket. Notably, the onset pressure of the transition decreases with additional pressure cycling and faster compression, which normally leads to over-pressurization. This suggests that defects or shear induced from the pressure cycling reduces the transition kinetics even during fast compression. These insights into the deformation and transition behavior in an FeNi alloy under multiple dynamic loading cycles can offer guidance for future design of advanced structural alloys and improve our understanding of planetary core processes.

FeNi alloy↗