Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “science & technology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Advancing Development of Emissions Detection (Final Report)

This document is the final report to the U.S. Department of Energy (DOE for contract DE-FE0031873) awarded to Colorado State University (CSU). CSU and partners at Harrisburg University of Science and Technology, University of Texas Arlington, and University of Texas at Austin organized several testing rounds to provide knowledge focused on advancing the detection capabilities of emissions monitoring devices. With this funding opportunity the research group began by establishing the Advancing the Development of Emission Detection (ADED) program, with the goal focused on enhancing the accuracy, reliability, and field applicability of methane detection technologies. This effort aimed to address the critical challenges of identifying and quantifying methane emissions while enabling industry stakeholders to meet regulatory compliance and environmental sustainability goals. The program engaged with industry, government, and technology stakeholders to promote adoption and consensus on testing techniques for methane detection solutions. Methane, a potent greenhouse gas, contributes significantly to global warming, and the oil and natural gas (O&G) sector is a primary source of methane emissions. Regulatory measures such as leak detection and repair (LDAR) programs have been implemented to address emissions. However, traditional LDAR approaches, reliant on handheld and component-level measurements, are resource-intensive. To address these limitations and move with evolving regulations, advanced methane technologies are emerging. These solutions include ground-based sensors, mobile systems (e.g., drones, vehicles, and aircraft), and satellite-based platforms. They offer innovative capabilities for autonomous monitoring, larger spatial coverage, and emission quantification using methods such as tracer gas techniques and inverse modeling with Gaussian plume analysis. The ADED program began with creating protocols for methane controlled release (CR) testing these continuous monitoring (CM) and survey technologies that detect and monitor methane emissions at O&G facilities. The protocols were then implemented throughout testing of CM and survey devices at CSU’s Methane Emissions Technology Evaluation Center (METEC) facility from 2021 through 2024. As apart of the protocol, solutions that tested under the ADED program installed their solutions at METEC, documented their system under test, and provided detection reports to the METEC team for analysis. The METEC team would provide the solutions with analyzed reports of their emissions and ground truth data of the releases conducted during their testing session. Under the ADED program, CMs were also tested at O&G facilities for a six week test run of challenge release (ChR) releases. The findings from the ADED program underscore the critical role of collaborative research and innovation in tackling methane emissions, offering a pathway for the oil and gas sector to achieve significant environmental and economic benefits. Results from METEC testing saw improvement of performance and accuracy across all solutions over the extent of the ADED experiments. The results also showed a variance in CM solution performance between CRs and ChRs. That variance pushed the team to further analyze the differences between CR testing environments and field conditions. With the drive from regulations and that variance in field conditions, the ADED team began designing a new CR testing protocol and additions to the METEC testing facility. The METEC team is furthering the progress made through the ADED program with awarded funding from DE-FE0032276. This funding pushes the development of METEC’s addition with new equipment, allowing for an updated facility layout. METEC still facilitates for traditional facilities, with a legacy pad, while expanding an new design based on how O&G infrastructure has Final Report - Contract Number: DE-FE0031873 been changed over the last decade. Throughout the ADED program the team has also been working with international partners to ensure staying in the trend globally. International partners have been essential in moving the new protocol forward to implement into CR testing at the METEC facility in Spring 2025.

42 ENGINEERING↗
DOE OSTI2025

Driving Electron Transfer in Photosystem I Using Far-Red Light: Overall Perspectives

Photosystem I (PSI) is a photosynthetic protein–pigment complex that, upon photoexcitation, transfers electrons to ferredoxin, facilitating the production of NADPH. Isolated PSI reaction centers (RCs) have also been used in hybrid systems to reduce protons and produce ‘biohydrogen’. This review article examines how various cyanobacteria with similar photosynthetic machinery utilize different wavelengths of light to execute photosynthetic electron transport through PSI. Key factors, such as, the structure of the electron transfer cofactors, the protein environment surrounding the primary donor pigments and hydrogen-bonding interactions with the surrounding protein matrix are analyzed to understand their roles in maintaining efficient electron transfer when it is driven using photons of different energies. We compare PSI complexes with known atomic structures from four species of cyanobacteria, Thermosynechococcus elongatus, Acaryochloris marina, Halomicronema hongdechloris, and Fischerella thermalis. T. elongatus is typical of most oxygenic photosynthetic organisms in that it requires visible light and uses only chlorophyll a (Chl a ) in PSI. In contrast, H. hongdechloris and F. thermalis are photoacclimating species capable of producing Chl f and Chl d that use red light when little visible light is available. A. marina , on the other hand, is adapted to red light conditions and consistently utilizes Chl d as its primary photosynthetic pigment, maintaining a stable pigment composition. Here, we explore the structural and functional differences between the PSI RCs of these organisms and the impact of these differences on electron transport. The structural differences in the cofactors influence both the absorption wavelengths of the cofactors and the energy levels of the intermediate states of electron transfer. An analysis of the surrounding protein shows how it has been adapted and underscores the interplay between the pigment structure, protein environment, and hydrogen bonding networks in tuning the efficiency and adaptability of photosynthetic mechanisms across different species of cyanobacteria.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Physical vapor deposition simulator by graphical processor unit ray casting

This paper presents fast, accurate software for modeling physical vapor deposition systems over irregular surfaces. The model is implemented using graphics processing unit (GPU) ray casting. Applied models are viewed as a cross section of the area of interest. Given evaporation rate, time, and angular profiles in a vacuum system, an iterative time-step approach for calculating deposition profiles is calculated in the GPU architecture following a ballistic modeling approach. Thin-film technologies for the electronics industry will require evaporations on complex surfaces. Depending on the nature of the surface, a uniform thin film across the topology is wanted for various device parameters. The ray casting method is tested against various profiles. The code is freely distributed on GitHub (see https://github.com/adam-r-thomas/PVDS).

Engineering↗
DOE OSTI2024

Introduction to Special Issue on the Early History of Nuclear Fusion

This introductory paper to the special issue of Fusion Science and Technology commemorates early research on fusion conducted at Los Alamos (the singular entity denoted Los Alamos Laboratory/Los Alamos Scientific Laboratory/Los Alamos National Laboratory at different times is designated “Los Alamos” in this paper) in support of the eventual H-bomb program. We survey the historical origins of the thermonuclear program, what was known of fusion reactions at the outbreak of the war, and the remarkable breakthroughs involving particularly the prospect of deuterium-tritium (DT) reactions conducted during the war, and we summarize the papers in this volume. Much of the nuclear fusion technical history presented herein has not been previously reported. Papers describe aspects of fusion science during these days, on shock hydrodynamics and on electron-radiation coupling, and on nuclear physics including the discoveries of resonances in both the DT cross section and in the lithium tritium-breeding cross section. Three papers follow our colleague Mark Paris’s finding Arthur Ruhlig’s 1938 paper on the first observation of DT fusion: one on how it influenced subsequent Manhattan Project research, another on a modern calculation of that historic experiment, and a third that has repeated the experiment using modern experimental capabilities. Other papers discuss how the first H-bomb test, Ivy Mike, led to the discovery of the new elements einsteinium and fermium and how the DT fusion processes played a key role in our universe’s development after the Big Bang. We also present a paper that analyzes the pioneering Cambridge University 1934 experiment by Marcus Oliphant, Paul Harteck, and Ernest Rutherford where deuterium-deuterium fusion was first observed and that describes how Ernest Lawrence missed identifying fusion in 1933. Finally, we present a summary of early concepts for controlled fusion energy that grew out of wartime discussions at Los Alamos. The papers show how J. Robert Oppenheimer played a leading technical role in the early developments of the H-bomb, before his later opposition—our first paper in this issue addresses the U.S. Department of Energy’s 2022 vacation of the earlier 1954 decision to revoke his security clearance.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2022

An epitaxial graphene platform for zero-energy edge state nanoelectronics

Graphene’s original promise to succeed silicon faltered due to pervasive edge disorder in lithographically patterned deposited graphene and the lack of a new electronics paradigm. Here we demonstrate that the annealed edges in conventionally patterned graphene epitaxially grown on a silicon carbide substrate (epigraphene) are stabilized by the substrate and support a protected edge state. The edge state has a mean free path that is greater than 50 microns, 5000 times greater than the bulk states and involves a theoretically unexpected Majorana-like zero-energy non-degenerate quasiparticle that does not produce a Hall voltage. In seamless integrated structures, the edge state forms a zero-energy one-dimensional ballistic network with essentially dissipationless nodes at ribbon–ribbon junctions. Seamless device structures offer a variety of switching possibilities including quantum coherent devices at low temperatures. This makes epigraphene a technologically viable graphene nanoelectronics platform that has the potential to succeed silicon nanoelectronics.

42 ENGINEERING↗
DOE OSTI2024

Efficient crystal structure materials as reactive sorbent for the CO 2 and CH 4 adsorption and storage

The efficient dirubidium cobalt bis(dihydrogendiphosphate) dihydrate compound is successfully synthesized in a solution and used as a reactive sorbent for the CO 2 and CH 4 gases adsorption and storage. A crystal of this Rb 2 Co(H 2 P 2 O 7 ) 2 ·2H 2 O compound has been isolated and characterized by single X-ray diffraction analysis and was found to crystallize in the triclinic system (P$\overline{1}$) with the cell parameters (Å): 6.980(1), 7.370(1), 7.816(1), 81.74(1), 70.35(1), 86.34(1); V = 374.68(9) Å3, Z = 2. The crystal-packing consists of a three-dimensional framework made upon corners and edges sharing of [RbO 7 ], [H 2 P 2 O 7 ] and [CoO 6 ] entities, furthermore linked by a network of H-bonds. The UV–Vis spectroscopy revealed usual transitions between the ground state 4T1g and the upper levels 4T2g, 4A2g and 4T1g (P). Moreover, the CO 2 and CH 4 gases sorption measurements were successfully performed at two different temperatures (25 and 45 °C) and various pressures ranging from vacuum to 50 bar. Our results show that rate of CO 2 and CH 4 capturing was 3.10 mmol/g and 2.35 mmol/g at temperature 25 °C and pressure 50 bar, respectively. This compound showed a clear potential for CO 2 /CH 4 adsorption and storage thereby paving the way towards its exploration and adaptation for capturing and collecting carbon dioxide and greenhouse gases from the air, and their conversion into hydrocarbon fuels using existing mature technologies. We have also conducted density functional theory calculations to study the CO 2 and CH 4 adsorption properties of Rb 2 Co(H 2 P 2 O 7 ) 2 ·2H 2 O. The simulation results show enhanced adsorption of both types of molecules on the surface of the material.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Bridging Additive Manufacturing and Electronics Printing in the Age of AI

Printing techniques have been instrumental in developing flexible and stretchable electronics, including organic light-emitting diode displays, organic thin film transistor arrays, electronic skins, organic electrochemical transistors for biosensors and neuromorphic computing, as well as flexible solar cells with low-cost processes such as inkjet printing, ultrasonic nozzle, roll-to-roll coating. The rise of additive manufacturing provides even more opportunities to print electronics in automated and customizable ways. In this work, we will review the current technologies of printing electronics (including printed batteries, supercapacitors, fuel cells, and sensors), especially with 3D printing. In this age of ongoing AI revolution, the application of AI algorithms is discussed in terms of combining them with 3D printing and electronics printing for a future with automated optimization, sustainable design, and customizable and scalable manufacturing.

Chemistry↗
DOE OSTI2021

Basic Energy Sciences Roundtable: Foundational Science for Carbon-Neutral Hydrogen Technologies

Basic research to identify and understand the fundamental principles governing hydrogen processes is essential for achieving a carbon-neutral, hydrogen-based energy and chemical infrastructure. In August 2021, the Office of Basic Energy Sciences (BES)—in coordination with the US Department of Energy (DOE) technology Offices of Energy Efficiency and Renewable Energy, Fossil Energy and Carbon Management, and Nuclear Energy—held a roundtable titled, “Foundational Science for Carbon-Neutral Hydrogen Technologies,” to discuss the scientific and technical barriers for carbon-neutral hydrogen production, storage, and utilization. Four priority research opportunities (PROs) were identified to address these scientific and technical challenges and accelerate progress toward the realization of energy-efficient, carbon-neutral cycles for hydrogen processes. The PROs are as follows: Discover and Control Materials and Chemical Processes to Revolutionize Electrolysis Systems; Manipulate Hydrogen Interactions to Harness the Full Potential of Hydrogen as a Fuel; Elucidate the Structure, Evolution, and Chemistry of Complex Interfaces for Energy- and Atom-Efficiency; and Understand and Limit Degradation Processes to Enhance the Durability of Hydrogen Systems.

08 HYDROGEN↗
DOE OSTI2023

SMPS data from TAMU TRACER campaign in the Houston TX region from July to September 2022

During TRACER, the Texas A&M Rapid Onsite Atmospheric Measurements Van (ROAM-V) was deployed to capture airmasses behind (maritime) and ahead (continental) of the passage of the sea-breeze front through Houston. On select sampling days, ROAM-V sampled in the morning/mid-day on the coast and then transited to a second inland site for the afternoon/evening. The suite of instruments deployed on ROAM-V included a Condensation Particle Counter (CPC; GRIMM Model 5.403 CPC), Scanning Mobility Particle Sizer (SMPS; TSI 3750 detector, TSI 3082 classifier, TSI 3088 neutralizer, TSI 3081A Differential Mobility Analyzer), Cloud Condensation Nuclei counter (Droplet Measurement Technologies CCN Counter), micro pulse lidar (Droplet Measurement Technologies Micro Pulse LiDAR (miniMPL)), and a Davis Rotating Uniform size-cut Monitor (DRUM; DRUMAir 4-DRUM). Before sampling at each location, the latitude and longitude were recorded using the GPS on the phone application “My Altitude”. Onboard the ROAM-V, aerosol samples are drawn through a shared isokinetic inlet at a flow rate ranging from 3.5 to 7.0 LPM. A portion of this flow, 1.0 LPM, is directed through TSI's 0.071 cm impactor attached to the classifier of the SMPS setup. The SMPS’s DMA and CPC are connected through a 20.3 cm length of 0.48 cm diameter tubing. Measured SMPS size distributions were used to calculate size-dependent particle losses for each SMPS scan. Particle losses from diffusion (based on Kesten, 1991 and Gormley, 1949) and inertial impaction in 90-degree bends (based on Aerosol Measurement, 2011 and Crane, 1977) were included in the loss calculation. This data was collected for ARM Field Campaign AFC07055 and supported by DOE ASR grant DE-SC0021047. For any further questions, please feel free to contact the instrument PI, Sarah D. Brooks, sbrooks@tamu.edu. Kesten et. al. Calibration of a TSI Model 3025 Ultrafine Condensation Particle Counter. Aerosol Science and Technology, 15:2, 107-111, 1991. Gormley et. al. Diffusion from a Stream Flowing through a Cylindrical Tube. Proceedings of the Royal Irish Academy, Vol 52, 163-169, 1948. Aerosol Measurement: Principles, Techniques, and Applications, Third Edition. John Wiley & Sons, Inc, 2011. Crane et. al. Inertial Deposition of Particles in a Bent Pipe. Journal of Aerosol Science, Vol 8, 161-170, 1977.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Development of Quantum Interconnects (QuICs) for Next-Generation Information Technologies

Just as “classical” information technology rests on a foundation built of interconnected information-processing systems, quantum information technology (QIT) must do the same. A critical component of such systems is the “interconnect,” a device or process that allows transfer of information between disparate physical media, for example, semiconductor electronics, individual atoms, light pulses in optical fiber, or microwave fields. While interconnects have been well engineered for decades in the realm of classical information technology, quantum interconnects (QuICs) present special challenges, as they must allow the transfer of fragile quantum states between different physical parts or degrees of freedom of the system. The diversity of QIT platforms (superconducting, atomic, solid-state color center, optical, etc.) that will form a “quantum internet” poses additional challenges. As quantum systems scale to larger size, the quantum interconnect bottleneck is imminent, and is emerging as a grand challenge for QIT. For these reasons, it is the position of the community represented by participants of the NSF workshop on “Quantum Interconnects” that accelerating QuIC research is crucial for sustained development of a national quantum science and technology program. Given the diversity of QIT platforms, materials used, applications, and infrastructure required, a convergent research program including partnership between academia, industry, and national laboratories is required.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

About the Complex Natural and Engineered Systems Pillar

Los Alamos National Laboratory is a world leader in applying multi-disciplinary science to complex systems within the Complex Natural and Engineered Systems (CNES) challenge areas. Our search for solutions requires science and technology innovation, as well as an integrated experiment, theory, and modeling and simulation approach. Our research and development spans from improving engineered systems such as nuclear weapons and the power grid, to understanding the interface of human and engineered systems from the subsurface to space, to studying how complex natural systems such as disease and climate impact humanity.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Cross-biome synthesis of source versus sink limits to tree growth

Uncertainties surrounding tree carbon allocation to growth are a major limitation to projections of forest carbon sequestration and response to climate change. The prevalence and extent to which carbon assimilation (source) or cambial activity (sink) mediate wood production are fundamentally important and remain elusive. We quantified source-sink relations across biomes by combining eddy-covariance gross primary production with extensive on-site and regional tree ring observations. We found widespread temporal decoupling between carbon assimilation and tree growth, underpinned by contrasting climatic sensitivities of these two processes. Substantial differences in assimilation-growth decoupling between angiosperms and gymnosperms were determined, as well as stronger decoupling with canopy closure, aridity, and decreasing temperatures. Our results reveal pervasive sink control over tree growth that is likely to be increasingly prominent under global climate change.

Science & Technology - Other Topics↗
DOE OSTI2023

2023 SAGE-Camp Report

The 7 th Summer Physics Camp for Young Women was successfully held in person in 2023 from June 5 th to 16 th at the New Mexico School for the Arts in Santa Fe, NM at Hilo Intermediate School in Hawaii. This year’s camp was dedicated to the topic of Energy Security and was made possible thanks to the strong collaboration of Los Alamos, Sandia and Hawaii teams and the logistical and financial support of Los Alamos and Sandia National Laboratories, New Mexico Consortium, SAGE- Moore Foundation, LANL Foundation, ACS, IEE, APS four corners, N3B, Hawaii Museum of Science and Technology, New Mexico School for the Arts (NMSA) and Tech Source. The camp mobilized more than 120 volunteers who made the camp a success. The camp is free of charge to the students and included free lunch and snacks for the busy brains to have plenty of energy, also included all materials needed for the hands-on activities (like drone building, crystal structure, solar panels, wind turbine fabrication, soldering, coding etc) and also a stipend for students who attended for the full two weeks and for two educators and two student mentors in NM. The camp offered 32 high school students from New Mexico and 8 from Hawaii a unique opportunity to explore science topics and meet a broad range of role model professionals across STEM fields including astrophysics, cybersecurity, Energy fields, space science, engineering, biophysics, environmental science, robotics, computer science, nuclear engineering, radiological science, physics and chemistry. With nearly 120 volunteers who came mainly from Los Alamos National Laboratory (66%) and Sandia national laboratories (18%), two funded educators from NM, Dr. Weldon Beauchamp and Dr. Ellee Cook, and two educators from Hilo, Dr. Pascale Creek Pinner and LeAnn Ragasa, the camp was educationally sound and extremely varied. The collaboration with school educators is critical for the goal of this camp to not only impact students' lives but also improve STEM education in NM and Hawaii. The ultimate goal of the camp is to increase higher education aspirations of students, empower them to consider careers in STEM and learn more about the opportunities available to them in our local colleges and DOE National Laboratories. In addition, the camp also hired 2 past students as student mentors, Megan Odom and Elisea Jackson, who currently attend NMSA and were students at the camp in 2022 when it was virtual. The in-person camp which aims at empowering under-represented minorities in STEM in our community received more than 52 applications this year from all over NM and 8 applications from Hawaii. Our selection criteria are based on diversity, equity and inclusion, and students for whom the camp can be a life-changing opportunity are given a chance to attend the camp. During COVID, the camp was held virtually and gave the opportunity to students from remote areas in NM and Hawaii to attend from their homes. This year, fantastic families supported students everyday even when home was in remote areas in NM like Lea county, Sandoval county, Bernalillo or Mora county. The organizers hope next year they can offer a residential option for students from remote areas.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2023

Vertical van der Waals heterojunction diodes comprising 2D semiconductors on 3D β-Ga 2 O 3

Wide bandgap semiconductors such as gallium oxide (Ga 2 O 3 ) have attracted much attention for their use in next-generation high-power electronics. Although single-crystal Ga 2 O 3 substrates can be routinely grown from melt along various orientations, the influence of such orientations has been seldom reported. Further, making rectifying p–n diodes from Ga 2 O 3 has been difficult due to lack of p-type doping. In this study, we fabricated and optimized 2D/3D vertical diodes on β-Ga 2 O 3 by varying the following three factors: substrate planar orientation, choice of 2D material and metal contacts. Furthermore, the quality of our devices was validated using high-temperature dependent measurements, atomic-force microscopy (AFM) techniques and technology computer-aided design (TCAD) simulations. Our findings suggest that 2D/3D β-Ga 2 O 3 vertical heterojunctions are optimized by substrate planar orientation (–201), combined with 2D WS 2 exfoliated layers and Ti contacts, and show record rectification ratios (>10 6 ) concurrently with ON-Current density (>10 3 A cm –2 ) for application in power rectifiers.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Building a Diverse and Inclusive HPC Community for Mission-Driven Team Science

The U.S. Department of Energy (DOE) has been a long-standing leader in driving advances in science and technology through advanced computing. However, DOE laboratories are currently facing urgent workforce challenges, particularly in terms of underrepresentation from key communities, including people of color, women, persons with disabilities, and first-generation scholars. This paper introduces the work carried out as part of the Exascale Computing Project (ECP) Broadening Participation Initiative, which aims to address workforce challenges through a lens that considers the distinct needs and culture of high-performance computing (HPC). The work focuses on three main efforts: hosting Intro to HPC Bootcamps, expanding the Sustainable Research Pathways (SRP) internship and workforce development program, and establishing an HPC Workforce Development and Retention Action Group. Finally, the paper also highlights various workforce efforts throughout the computational science community and explores opportunities for future work aimed at broadening participation in HPC.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Sentiment analysis of the United States public support of nuclear power on social media using large language models

This study utilized large language models (LLMs) to analyze public sentiment in the United States (US) regarding nuclear power on social media, focusing on X/Twitter, considering climate change challenges and advancements in nuclear power technology. Approximately, 1.26 million nuclear tweets from 2008–2023 were examined to fine-tune LLMs for sentiment classification. We found the crucial role of accurate data labeling for model performance, with potential implications for a 15% improvement, achieved through high-confidence labels. LLMs demonstrated better performance compared to traditional machine learning classifiers, with reduced susceptibility to overfitting and up to 96% classification accuracy. LLMs are used to segment the US public tweets into policy and energy-related categories, revealing that 68% are politically themed. Policy tweets tended to convey negative sentiment, often reflecting opposing political perspectives and focusing on nuclear deals and international relations. Energy-related tweets covered diverse topics with predominantly neutral to positive sentiment, indicating broad support for nuclear power in 48 out of 50 US states. The US public positive sentiments toward nuclear power stemmed from its high power density, reliability regardless of weather conditions, environmental benefits, application versatility, and recent innovations and advancements in both fission and fusion technologies. Negative sentiments primarily focused on waste management, high capital costs, and safety concerns. The neutral campaign highlighted global nuclear facts and advancements, with varying tones leaning towards positivity or negativity. An interesting neutral theme was the advocacy for the combined use of renewable and nuclear energy to attain net-zero goals.

Energy & Fuels↗
DOE OSTI2019

Focused Electron Beam-Based 3D Nanoprinting for Scanning Probe Microscopy: A Review

Scanning probe microscopy (SPM) has become an essential surface characterization technique in research and development. By concept, SPM performance crucially depends on the quality of the nano-probe element, in particular, the apex radius. Now, with the development of advanced SPM modes beyond morphology mapping, new challenges have emerged regarding the design, morphology, function, and reliability of nano-probes. To tackle these challenges, versatile fabrication methods for precise nano-fabrication are needed. Aside from well-established technologies for SPM nano-probe fabrication, focused electron beam-induced deposition (FEBID) has become increasingly relevant in recent years, with the demonstration of controlled 3D nanoscale deposition and tailored deposit chemistry. Moreover, FEBID is compatible with practically any given surface morphology. In this review article, we introduce the technology, with a focus on the most relevant demands (shapes, feature size, materials and functionalities, substrate demands, and scalability), discuss the opportunities and challenges, and rationalize how those can be useful for advanced SPM applications. As will be shown, FEBID is an ideal tool for fabrication/modification and rapid prototyping of SPM-tipswith the potential to scale up industrially relevant manufacturing.

36 MATERIALS SCIENCE↗