SEARCH · Engineering Papers

Results for “optimization methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Search for Neutrino Doublets and Triplets Using 11.4 yr of IceCube Data

We report a search for high-energy astrophysical neutrino multiplets, detections of multiple neutrino clusters in the same direction within 30 days, based on an analysis of 11.4 yr of IceCube data. A new search method optimized for transient neutrino emission with a monthly timescale is employed, providing a higher sensitivity to neutrino fluxes. This result is sensitive to neutrino transient emission, reaching per-flavor flux of approximately 10 -10 erg cm -2 s -1 from the Northern Sky in the energy range E ≳ 50 TeV. The number of doublets and triplets identified in this search is compatible with the atmospheric background hypothesis, which leads us to set limits on the nature of neutrino transient sources with emission timescales of one month.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2014

Building America Case Study: Excavationless Exterior-Side Foundation Insulation for Existing Homes, Minneapolis, Minnesota (Fact Sheet)

Building science research supports installing exterior (soil side) foundation insulation as the optimal method to enhance the hygrothermal performance of new homes. With exterior foundation insulation, water management strategies are maximized while insulating the basement space and ensuring a more even temperature at the foundation wall. However, such an approach can be very costly and disruptive when applied to an existing home, requiring deep excavation around the entire house. The NorthernSTAR Building America Partnership team implemented an innovative, minimally invasive foundation insulation upgrade technique on an existing home. The approach consisted of using hydrovac excavation technology combined with a liquid insulating foam. The team was able to excavate a continuous 4" wide by 4' to 5' deep trench around the entire house, 128 linear feet, except for one small part under the stoop that was obstructed with concrete debris. The combination pressure washer and vacuum extraction technology also enabled the elimination of large trenches and soil stockpiles normally produced by backhoe excavation. The resulting trench was filled with liquid insulating foam, which also served as a water-control layer of the assembly. The insulation was brought above grade using a liquid foam/rigid foam hybrid system and terminated at the top of the rim joist. Cost savings over the traditional excavation process ranged from 23% to 50%. The excavationless process could result in even greater savings since replacement of building structures, exterior features, utility meters, and landscaping would be minimal or non-existent in an excavationless process.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2014

Sealing the Deal

Pacific Northwest National Laboratory leveraged simulation to develop an optimized method for inspecting sealed containers in verifying nuclear arms control treaties.

Jones, Anthony M.↗

DOE OSTI2014

Technology Solutions Case Study: Excavationless: Exterior-Side Foundation Insulation for Existing Homes

Building America↗

DOE OSTI2017

PDE-constrained Optimization under Uncertainty

Uncertainty is pervasive in all science and engineering applications. Incorporating uncertainty in physical models is therefore both natural and vital. In doing so, we often arrive at parametric systems of partial differential equations (PDEs). When passing from simulation to optimization, we obtain (typically nonconvex) infinite-dimensional optimization problems that, upon discretization, result in extremely large-scale nonlinear programs. For example, consider a linear elliptic PDE on a two- dimensional domain with a single random coeffcient. If we sampled the random input with 10,000 realizations of the coeffcient, the resulting optimization problem would have 10,000 PDE constraints. Furthermore, discretizing each PDE with piecewise linear finite elements on a 100X100 uni- form quadrilateral mesh results in 100,000,000 degrees of freedom. As a result, the critical components for ensuring mesh-independent performance of numerical optimization methods in the deterministic setting, for example, solution regularity and generalized differentiability, are even more critical in the stochastic setting.

42 ENGINEERING↗

DOE OSTI2021

NRIC Final Water Management Options

The purpose of this paper is to inform advanced reactor developers of the conditions and requirements needed to manage the water used to reject heat from advanced reactor demonstrations at the INL. While there are many advanced reactor concepts, all of them require heat rejection, and some plan to use water for hear rejection. Cooling water for heat rejection is frequently the largest fresh-water load for a nuclear reactor, and therefore the focus of water management. The type of reactor and its purpose, the physical conditions at the INL, and the regulatory structure of the demonstration also influence the optimal method of heat rejection. Choosing the best method of rejecting heat will significantly influence the cost and probability of success for any advanced reactor demonstration. One of the important considerations in the deployment of demonstration plants at the INL site is water use and its implications. Advanced reactor developers need to consider the limitations of the water consumption based on the state and federal regulations. The water consumption may become a limitation when the demonstration reactor capacities reach to conventional nuclear power plants.

99 GENERAL AND MISCELLANEOUS↗

DOE OSTI2021

Human-automated vehicle interactions

This dissertation is proposed to answer the question: how can the interactions between human and automated vehicles be used to improve the overall performance of automated driving technology? Multiple different modules in automated vehicles such as the perception, motion plan and motion control modules can potentially be benefitted from human-automated vehicle interactions. For perception module, the self-correction of faulty sensors can be achieved using human demonstration data. For motion plan and motion control modules, the performance of the low-level motion controller can be improved with the help of human demonstration, and the behavior of the motion planner can be improved using human intervention data during automated driving. Moreover, a better model for a human driver could improve the overall efficiency and comfort of vehicles in connected mixed traffic. In this dissertation, the technical research toward these goals has been completed and has resulted in several peer-reviewed publications. Optimization methods and model predictive control are used extensively to improve energy efficiency while maintaining safe and comfort driving. An inverse model predictive control (IMPC) method has been developed and it has been proven to be effective in modeling the motion of human driven vehicles. The proposed method has demonstrated its benefits in both connected automated highway driving and the bilateral adaptation of human driver and automated driving controller in human-in-the loop simulations. The proposed future research seeks to broaden the application of IMPC by considering a more comprehensive cost function design and applying it to more complex driving situations.

Guo, Longxiang↗

DOE OSTI2021

HUMAN-AUTOMATED VEHICLE INTERACTIONS

Guo, Longxiang↗

DOE OSTI2022

Optical design concept of the CMB-S4 large-aperture telescopes and cameras

CMB-S4 -- the next-generation ground-based cosmic microwave background (CMB) experiment - will significantly advance the sensitivity of CMB measurements and improve our understanding of the origin and evolution of the universe. CMB-S4 will deploy large-aperture telescopes fielding hundreds of thousands of detectors at millimeter wavelengths. We present the baseline optical design concept of the large-aperture CMB-S4 telescopes, which consists of two optical configurations: (i) a new off-axis, three-mirror, free-form anastigmatic design and (ii) the existing coma-corrected crossed-Dragone design. We also present an overview of the optical configuration of the array of silicon optics cameras that will populate the focal plane with 85 diffraction-limited optics tubes covering up to 9 degrees of field of view, up to $1.1 \, \rm mm$ in wavelength. We describe the computational optimization methods that were put in place to implement the families of designs described here and give a brief update on the current status of the design effort.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2021

Generalized Bayesian Framework for Evaluation of Integral Benchmark Experiments

A recently published generalized Bayesian optimization framework has provided a way to retract any or all of the three common assumptions underlying the conventional Generalized Linear Least Squares (GLLS) optimization method based on the concepts introduced in reference two. These assumptions are: 1. Perfection: The model used for data evaluation and the prior probability distribution function (PDF) of generalized* data are perfect; 2. Normality: The prior and posterior PDF are normal; and 3. Linearity: The model is linear. In this work we outline how the framework in 1 could be directly adopted for improved evaluation of nuclear criticality integral benchmark experiments (IBEs) by: 1. Removing the first assumption alone by utilizing the concept of imperfections introduced in 1 to enable evaluation in the presence of discrepancies between the data and model or of missing covariance information by a GLLS method that will be seen as a generalization of the conventional GLLS method employed by the TSURFER code, and by 2. Removing the remaining two assumptions by implement- ing a Markov Chain Monte Carlo method for computation of the posterior PDF in the SAMPLER code, where TSURFER and SAMPLER are the uncertainty quantification (UQ) codes for IBEs in the SCALE code system based on the GLLS, and the stochastic method, respectively.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2023

Criticality Experiments to Reduce Compensating Errors in Plutonium Nuclear Data

Compensating errors between nuclear data observables in a library can adversely impact application simulations. The primary goal of the EUCLID project (Experiments Underpinned by Computational Learning for Improvements in Nuclear Data) is to reduce compensating errors in nuclear data. A new criticality experiment, described in this work, was designed with the specific target nuclear data of 239 Pu fission, inelastic scattering, elastic scattering, capture, nu-bar, and prompt fission neutron spectrum (PFNS). This work will focus on the design and execution of the EUCLID experiment, performed on the Planet vertical lift critical assembly machine at the National Criticality Experiments Research Center (NCERC). The criticality experiment includes two different configurations with very different geometries: one is cube-like to minimize neutron leakage while the other is slab-like to maximize leakage. Having these two widely varying configurations allows the scattering sensitivities of 239 Pu to the neutron multiplication factor to be greatly changed while minimally impacting the other cross section sensitivities. Both configurations utilize the Pu ZPPR (Zero Power Physics Reactor) plates as fuel. The experiments were designed using a D-Optimality criteria, which is an optimization method minimizing the log-determinant of the adjusted nuclear data covariance for the target reactions. These experiments include not only inference of k eff , as done in all critical benchmark experiments, but several other responses as well, such as neutron multiplication measurements and reaction rate ratios. After analysis of the measured data is complete, adjustment of nuclear data will be performed to assess whether the new experimental data successfully reduced compensating errors.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2015

A study of transfer of UNF from non-disposable canisters - 15388

A study was performed by AREVA and URS for the Department of Energy (DOE) [1] to establish optimal methods for the opening of dry storage canisters (DSC) and the subsequent repackaging of used nuclear fuel (UNF) from the DSCs into generic standard transportation, aging, and disposal canisters (STADs) in wet or dry environments at reactor, consolidated storage, or repository sites. Eight dry and wet cutting technologies were evaluated: (1) skiving; (2) milling; (3) arc gouging/plasma torch; (4) cutting wheel; (5) diamond cable cutting; (6) laser cutting; (7) sawing; and (8) electrical discharge machining. The evaluated UNF repackaging technologies options included: (1) wet transfer in a pool; (2) dry transfer in a dry transfer system (DTS); (3) dry transfer in a fixed hot cell (FHC); (4) dry transfer in a mobile hot cell (MHC), and (5) a hybrid approach utilizing wet transfer in a pool and dry transfer in a FHC. A systems engineering evaluation was utilized for ranking the eight viable cutting options and the five different repackaging approaches for each of the sites. The systems engineering evaluation took into account six criteria (i.e., life cycle costs, worker dose, operational efficiency, technical maturity, ease of licensing, and waste generation) and performed a qualitative pairwise ranking of their relative importance to one another. Then quantitative or qualitative factors associated with each criterion (e.g., cost in millions of dollars, relative ease of licensing, etc.) for each option at each location (reactor, consolidated storage facility [CSF], repository) were developed based on historical experience, existing design studies, current 'state-of-the art', and/or engineering judgment. Using this input, the systems engineering evaluation identified dry skiving as the preferred cutting technology, with the wheel cutting technology in either a dry or wet environment identified as a promising technology that, with some RD and D, could mature to a better option (depending also on the disposition of the used DSC). For a reactor and a CSF/repository site, the systems engineering evaluation ranked the repackaging option using the skiving dry cutting technique and wet transfer of UNF in a pool as the highest option. However for a CSF and a repository site, the team recommended the hybrid option using the skiving dry cutting technique and both dry and wet transfer of UNF in a pool and FHC as a potentially better option (providing specific benefits such as higher throughput and more flexibility in operation). (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2023

Process Optimization

Process optimization is the discipline of adjusting a process to optimize a specified set of parameters without violating engineering constraints. This article reviews data-driven optimization methods based on genetic algorithms and stochastic models and demonstrates their use in powder-bed fusion and directed energy deposition processes. In the latter case, closed-loop feedback is used to control melt pool temperature and cooling rate in order to achieve desired microstructure.

Sprayberry, Michael↗

DOE OSTI2025

Enhancing The Thermal Resistivity of Rigid Polyisocyanurate Foam Insulation

The development of rigid polyurethane foam insulation has garnered considerable attention because of its promising applications in the buildings and construction industry. Its low thermal conductivity makes it an attractive choice for improving energy performance in buildings. Current Rigid Polyurethane foams have thermal resistivity (R-value/in.) 5.5 to 6.5 h.ft2F/BTU/in.· that could be further improved by diminishing the heat transfer through the foam matrix. Nevertheless, minimizing both conduction (through gas and solid) and radiation simultaneously in porous solids is a significant challenge due to the trade-off between these two mechanisms. This study focuses on improving the R-value of the insulation foams via several strategies: such as type and the amount of the surfactants, blowing agent content and precooling and premixing polyol mixture. These methods optimized thermal properties of the PIR foams, achieving R/in. as high as 8.3. This excellent R/in. is anticipated to be a critical factor in significantly advancing the thermal insulation performance of rigid polyurethane cellular foams, thereby enhancing their efficacy in energy-efficient building applications.

Wanasinghe Mudiyanselage Pahala Gedara, Shiwanka V↗

DOE OSTI2025

A Brief Survey on High Performance Computing Systems Power Management

This paper provides a survey of software-based power management techniques in High Performance Computing (HPC) systems. Seven existing power management and monitoring tools and frameworks are discussed. These are: Variorum, dynamic energy-performance optimizer (DEPO), Powersched, Bull Dynamic Power Optimizer (BDPO), Energy Aware Runtime (EAR), Global Extensible Open Power Manager (GEOPM), and PoLiMEr. Each of these tools is evaluated based on hardware abstraction, optimization methods, usability, and experimental validation. This survey highlights the diversity of approaches in managing energy efficiency, from vendor-neutral APIs to algorithm-driven power capping, and dynamic frequency adjustments. Given that energy requirements for large computational systems is increasing quickly, the importance of integrating these tools into existing HPC environments and the need for further research in this rapidly evolving field is also discussed.

97 - MATHEMATICS AND COMPUTING↗

DOE OSTI2018

A new modified BFGS method for unconstrained optimization problems

Using chain rule, we propose a modified secant equation to get a more accurate approximation of the second curvature of the objective function. Then, based on this modified secant equation we present a new BFGS method for solving unconstrained optimization problems. The proposed method makes use of both gradient and function values, and utilizes information from two most recent steps, while the usual secant relation uses only the latest step information. Under appropriate conditions, we show that the proposed method is globally convergent without convexity assumption on the objective function. Comparative numerical results show computational efficiency of the proposed method in the sense of the Dolan–Moré performance profiles.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2016

Cherenkov imaging method for rapid optimization of clinical treatment geometry in total skin electron beam therapy

Purpose: A method was developed utilizing Cherenkov imaging for rapid and thorough determination of the two gantry angles that produce the most uniform treatment plane during dual-field total skin electron beam therapy (TSET). Methods: Cherenkov imaging was implemented to gather 2D measurements of relative surface dose from 6 MeV electron beams on a white polyethylene sheet. An intensified charge-coupled device camera time-gated to the Linac was used for Cherenkov emission imaging at sixty-two different gantry angles (1° increments, from 239.5° to 300.5°). Following a modified Stanford TSET technique, which uses two fields per patient position for full body coverage, composite images were created as the sum of two beam images on the sheet; each angle pair was evaluated for minimum variation across the patient region of interest. Cherenkov versus dose correlation was verified with ionization chamber measurements. The process was repeated at source to surface distance (SSD) = 441, 370.5, and 300 cm to determine optimal angle spread for varying room geometries. In addition, three patients receiving TSET using a modified Stanford six-dual field technique with 6 MeV electron beams at SSD = 441 cm were imaged during treatment. Results: As in previous studies, Cherenkov intensity was shown to directly correlate with dose for homogenous flat phantoms (R{sup 2} = 0.93), making Cherenkov imaging an appropriate candidate to assess and optimize TSET setup geometry. This method provided dense 2D images allowing 1891 possible treatment geometries to be comprehensively analyzed from one data set of 62 single images. Gantry angles historically used for TSET at their institution were 255.5° and 284.5° at SSD = 441 cm; however, the angles optimized for maximum homogeneity were found to be 252.5° and 287.5° (+6° increase in angle spread). Ionization chamber measurements confirmed improvement in dose homogeneity across the treatment field from a range of 24.4% at the initial angles, to only 9.8% with the angles optimized. A linear relationship between angle spread and SSD was observed, ranging from 35° at 441 cm, to 39° at 300 cm, with no significant variation in percent-depth dose at midline (R{sup 2} = 0.998). For patient studies, factors influencing in vivo correlation between Cherenkov intensity and measured surface dose are still being investigated. Conclusions: Cherenkov intensity correlates to relative dose measured at depth of maximum dose in a uniform, flat phantom. Imaging of phantoms can thus be used to analyze and optimize TSET treatment geometry more extensively and rapidly than thermoluminescent dosimeters or ionization chambers. This work suggests that there could be an expanded role for Cherenkov imaging as a tool to efficiently improve treatment protocols and as a potential verification tool for routine monitoring of unique patient treatments.

61 RADIATION PROTECTION AND DOSIMETRY↗

DOE OSTI2013

Shape optimized headers and methods of manufacture thereof

Disclosed herein is a shape optimized header comprising a shell that is operative for collecting a fluid; wherein an internal diameter and/or a wall thickness of the shell vary with a change in pressure and/or a change in a fluid flow rate in the shell; and tubes; wherein the tubes are in communication with the shell and are operative to transfer fluid into the shell. Disclosed herein is a method comprising fixedly attaching tubes to a shell; wherein the shell is operative for collecting a fluid; wherein an internal diameter and/or a wall thickness of the shell vary with a change in pressure and/or a change in a fluid flow rate in the shell; and wherein the tubes are in communication with the shell and are operative to transfer fluid into the shell.

47 OTHER INSTRUMENTATION↗