Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “layered cathodes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Examining Ohmic Losses in Fuel-Cell Catalyst Layers with Different Pt/C Ratios

A model of a fuel-cell cathode with distinct proton conductivities at the agglomerate and electrode scales was used to simulate polarization curves under conditions with facile oxygen transport. Here, the model was applied to electrodes containing agglomerates with different ratios of platinum to carbon in order to examine the hypothesis that intra-agglomerate proton conductivity is substantially lower than ionomer conductivity. The model predicts decreasing performance and increasing sensitivity to Pt/C ratio as intra-agglomerate conductivity declines relative to a constant through-electrode conductivity. Experiments on catalyst layers with Vulcan supports do not show the predicted trend indicating that mesoscale intra-agglomerate conductivity is not orders of magnitude lower than bulk ionomer conductivity.

08 HYDROGEN↗
DOE OSTI2022

Process design for calcination of nickel-based cathode materials by in situ characterization and multiscale modeling

Developing battery materials towards commercial use, from the early discovery through synthesis, processing, scaling up, and eventually to industrial production, may take decades. A notable example is Ni-based layered oxides, which were discovered as early as 1950s and intensively pursued as cathode active materials (CAMs) since the early 90s but have yet to realize their full commercial potential. Significant efforts have been devoted to materials development aiming at improving performance, far less to process development for large-scale synthesis and processing of CAMs. In this paper, we present a rational design of calcination for scalable production of Ni-based CAMs. We start with an overview of the current understanding and knowledge gaps hindering rational process design and scaling-up of the calcination process. Then with specific examples, we demonstrate how to tackle those fundamental challenges through in situ characterization and multiscale modeling. Finally, we conclude by providing perspectives on the remaining challenges and emerging opportunities in commercial development of Ni-based cathodes, calling for more endeavors in this field.

25 ENERGY STORAGE↗
DOE OSTI2023

3D Quantification of Elemental Gradients within Heterostructured Particles of Battery Cathodes

Heterogenous architectures with elemental gradients tailored within particles have been pursued to combat the instabilities limiting Ni-rich cathode materials for lithium-ion batteries. The growth of different compositional layers is accomplished during the synthesis of hydroxide precursors. However, the extent to which these concentration gradients are modified during high-temperature reactions is difficult to establish in their intact, spherical form. Here, we show the entire three-dimensional structure of a secondary particle can be resolved nondestructively with differential X-ray absorption spectroscopy (XAS) through transmission X-ray microscopy (TXM). The relationship between particle location and elemental content was fully quantified, with high statistical significance, for heterostructures possessing different compositional gradients in the precursors with 90:5:5 Ni:Mn:Co core compositions. Reduced elemental heterogeneity was observed after high-temperature synthesis, but gradients remained. In conclusion, the methodology presented should be used to guide synthesis while assuring that gains in electrochemical performance are linked to precise elemental distributions at the nanoscale.

25 ENERGY STORAGE↗
DOE OSTI2021

Process Engineering to Increase the Layered Phase Concentration in the Immediate Products of Flame Spray Pyrolysis

Flame-spray-pyrolysis (FSP) is a robust and scalable process to synthesize particles at the commodity-scale. FSP has been used to produce the precursor powders which were converted to the layered structure $(R\bar{3m} \text { phase})$ by a postannealing step in making nickel-rich cathode materials (NCMs). Theoretically, the high flame temperature (normally >1500 K) in FSP can provide adequate energy for the phase conversion from rock-salt to layered structures and potentially enables one-step synthesis. However, the high flame temperature is a critical issue to cause lithium loss and structural degradation, preventing the formation of the layered phase. Here, guided by the gaseous nucleation theory, we implemented several FSP processes with different solution recipes. The layered phase concentration in the as-burned products can be increased with the solution enthalpies. By adding a rapid quench step to suppress the lithium loss and phase degradation, the layered phase can be further increased. This work contributes new ideas to innovating process regarding the process efficiency and throughput of manufacturing cathode materials at a large scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Dual functionality of over-lithiated NMC for high energy silicon-based lithium-ion batteries

Owing to their high specific capacity and suitably low operating potential, silicon-based anodes are an attractive alternative to graphite in next-generation lithium-ion batteries. However, silicon anodes suffer from low initial coulombic efficiency and fast capacity decay, limiting their widespread application. Pre-lithiation strategies are highly appealing to compensate for irreversible active lithium loss and to boost the cell energy density. In this work, we maximize the cell energy density by direct pre-lithiation of the NMC (LiNi 0.5 Mn 0.3 Co 0.2 O 2 ) cathode to Li 1+x NMCO 2 without introducing inactive deadweight to either electrode. First, we demonstrate that Li 1+x NMCO 2 can be synthesized chemically, via reaction between NMC and lithium napthalide, and electrochemically. The NMC cathode is tolerant of a one-time over-lithiation up to 60 mA h g NMC -1 , giving capacity retention on par with untreated NMC in half cell electrochemical cycling. Using synchrotron X-ray absorption spectroscopy (ex situ) and diffraction (in situ), we demonstrate that higher amounts of over-lithiation lead to local structure distortion – driven by transition metal reduction to Jahn–Teller active Mn 3+ and Co 2+ – as well as bulk structural hysteresis during over-lithiation and layer “buckling” that increases the amount of lithium extracted from the structure in the charged state. The Li 1+x NMCO 2 with low-to-moderate over-lithiation capacity (23, 46, and 70 mA h g NMC -1 ) is proven to be a highly effective dual-purpose lithium source and cathode material in full cell tests with a commercially relevant Si–graphite anode. These cells show higher capacity, superior cycle life, and improved coulombic efficiencies when compared to those with stoichiometric NMC cathodes. Finally, this study introduces a new and simple method to pre-lithiate layered transition metal oxide cathodes, opening up new possibilities for the development of high energy density lithium-ion batteries with next-generation anodes.

25 ENERGY STORAGE↗
DOE OSTI2021

Removal of As(III) by Electrically Conducting Ultrafiltration Membranes

As(III) species are the predominant form of arsenic found in groundwater. However, nanofiltration (NF) and reverse osmosis (RO) membranes are often unable to effectively reject As(III). In this study, we fabricate highly conducting ultrafiltration (UF) membranes for effective As(III) rejection. Here, these membranes consist of a hydrophilic nickel-carbon nanotubes layer deposited on a UF support, and used as cathodes. Applying cathodic potentials significantly increased As(III) rejection in synthetic/real tap water, a result of locally elevated pH that is brought upon through water electrolysis at the membrane/water interface. The elevated pH conditions convert H 3 ASO 3 to H 2 AsO 3 – /HAsO 3 2– that are rejected by the negatively charged membranes. In addition, it was found that Mg(OH) 2 that precipitates on the membrane can further trap arsenic. Importantly, almost all As(III) passing through the membranes is oxidized to As(V) by hydrogen peroxide produced on the cathode, which significantly decreased its overall toxicity and mobility. Although the high pH along the membrane surface led to mineral scaling, this scale could be partially removed by backwashing the membrane. To the best of our knowledge, this is the first report of effective As(III) removal using low-pressure membranes, with As(III) rejection higher than that achieved by NF and RO, and high water permeance.

42 ENGINEERING↗
DOE OSTI2021

Simulation of enhanced light extraction from periodic, disordered, and quasi-periodic OLED structures

Here we have developed a rigorous scattering matrix theory of light emission from periodically structured media using a Green’s function approach. We computationally simulate the spectral power inside the structure, incorporating Purcell factor enhancements, and find internal waveguiding modes and plasmonic losses. We simulate the light-outcoupling factor η out and describe how corrugations and structured media can enhance η out . We have extended our framework to describe non-periodic disordered arrays as well as aperiodic quasi-crystalline arrays. Flat organic light-emitting diodes (OLEDs) have low outcoupling with η out ~20% since most of the light is trapped in waveguided modes in higher index layers or lost to plasmonic excitations at the metal cathode. Periodically corrugated OLEDs can achieve highly enhanced η out ~65%-70% for pitch values between 1000 and 2000 nm, representing an enhancement factor >3 over planar structures. Periodic corrugations strongly diffract trapped waveguided and plasmonic modes to the emissive air cone. Disordered templates also can cause significant enhanced outcoupling with η out ~50%-55% for smaller nearest-neighbor separations of 300–400 nm. Quasi-crystalline tilings can also lead to enhancements of η out ~50%-55%. This framework can be utilized to design novel structured media that can generate high light extraction.

42 ENGINEERING↗
DOE OSTI2023

Electron energy levels determining cathode electrolyte interphase formation

Cathode electrolyte interphase (CEI) has a significant impact on the performance of rechargeable batteries and is gaining increasing attention. Understanding the fundamental and detailed CEI formation mechanism is of critical importance for battery chemistry. Herein, a diverse of characterization tools are utilized to comprehensively analyze the composition of the CEI layer as well as its formation mechanism by LiCoO 2 (LCO) cathode. We reveal that CEI is mainly composed of the reduction products of electrolyte and it only parasitizes the degraded LCO surface which has transformed into a disordered spinel structure due to oxygen loss and lithium depletion. Based on the energy diagram and the chemical potential analysis, the CEI formation process has been well explained, and the proposed CEI formation mechanism is further experimentally validated. This work highlights that the CEI formation process is nearly identical to that of the anode-electrolyte-interphase, both of which are generated due to the electrolyte directly in contact with the low chemical potential electrode material. This work can deepen and refresh our understanding of CEI.

LiCoO2↗
DOE OSTI2024

The role of Li doping in layered/layered Na x Li y Ni 0.4 Fe 0.2 Mn 0.4 O 2 intergrowth electrodes for sodium ion batteries

Here, the layered NaTMO 2 (TM = Ni, Fe, Mn) materials with the O3-type structure are attractive as positive electrodes for sodium ion batteries because of their high theoretical capacity. Additionally, Li doping in these materials has been shown to offer substantial enhancements to their electrochemical properties by promoting the formation of intergrowth structures, which are combinations of specific phases. However, the mechanism by which the intergrowth modifies the electrochemical properties is often unclear. Systematic variation of Li content in Na x Li y Ni 0.4 Fe 0.2 Mn 0.4 O 2 (NFM-Li y ) was conducted to identify its role in structural modification and electrochemical performance. Li contents of 0.15 and greater generate a layered/layered Na-O3/Li-O’3 intergrowth structure. 7 Li and 23 Na nuclear magnetic resonance and x-ray absorption spectroscopy identify that when the total solubility for alkali ions in the layered structure is exceeded, Li continues to form the Li-O’3 phase while the excess Na forms residual sodium compounds such as Na 2 O. Higher Li content is associated with improved capacity retention in the initial cycles from the superior stability of the mechanically linked NaO3/Li-O’3 structure that suppresses the P3 to OP2 phase transition during charge. However, high Li contents are associated with increased rates of parasitic side reactions that reduce long-term cycling stability. These side reactions are associated with the instability of the cathode-electrolyte interphase, which can be partially mitigated by atomic layer deposition (ALD) coating with alumina, which significantly enhances the capacity retention and Coulombic efficiency over many cycles. Overall, we find that the layered/layered Na-O3/Li-O’3 intergrowth structure is able to provide structural stability and suppress undesired phase transformations but is overwhelmed by the increased reactivity of the surface if not protected by surface coating.

25 ENERGY STORAGE↗
DOE OSTI2025

Optimization of catholyte for halide-based all-solid-state batteries

Halide solid electrolytes gain significant attention due to their high ionic conductivity, low processing temperature, dry air compatibility, and high-voltage stability. However, low cathode active material (CAM) loading in the composite cathode constrains the realization of high energy density for halide-based all-solid-state batteries. In this study, three halide materials, raw Li 3 YBrCl 5 (LYBC-R, <30μm), milled LYBC (LYBC-M, <5 μm) and freeze-dried Li 3 InCl 6 (LIC, <500 nm), were used as catholytes, combined with LYBC-M as the electrolyte and LiIn alloy as the anode. The CAM:catholyte ratio was investigated as well as stack pressure and operating temperature. Our study demonstrates that particle size of the catholyte plays an important role only for high CAM loading or high C-rate cycling. At moderate CAM loading (65 and 70wt% LiNi 0.83 Mn 0.06 Co 0.11 O 2 ) and 0.1 C-rate, all the three catholytes perform well, providing initial discharge capacities >177 mAh/g. At high CAM loading (85wt%) and 0.1 C-rate, a cathode with the nano-scale LIC catholyte provides discharge capacity of 175 mAh/g, while the larger particle size catholytes suffer significantly reduced capacity. Both LYBC and LIC catholytes provided capacity retention >80% after 200 cycles at 0.5C. These results imply that cathode particle size is critically important for performance at high CAM loading. Furthermore, both electrolyte and cathode were tape cast to scale up size and prepare realistic layer thicknesses. A small amount of binder was used in both layers, to balance the electrochemical performance and mechanical properties. Further, the discharge capacity of a tape cell was 152mA h/g at 0.1C with a capacity retention of 81.8% after 20 cycles at 0.5C. The results demonstrate the excellent performance of LYBC as an electrolyte, and provide guidance for halide-based cathode design.

25 ENERGY STORAGE↗
DOE OSTI2020

Solid 3D Li–S Battery Design via Stacking 2D Conductive Microporous Coordination Polymers and Amorphous Li–S Layers

To make a lithium-sulfur (Li-S) battery practical, not only high gravimetric energy capacity is important, but also high volumetric energy capacity will be required. The currently explored Li-S cathode designs often deploy systems with liquid electrolyte infiltration, hence with relatively low volumetric capacity. In the current study, we theoretically test a compact solid three-dimensional (3D) design (more like a Li-ion battery cathode than a conventional Li-S cathode) consisted of a sandwich structure alternating between the two-dimensional (2D) Mn-hexaaminobenzene-based coordination polymer (2D Mn-HAB-CP) layer and the amorphous Li-S layer. We study the theoretical limits for both its gravimetric and volumetric energy capacity, as well as its structural stability and Li diffusion within the cathode system. To study the Li diffusion within an amorphous system, we also develop a pull-atom molecular dynamics (PA-MD) to calculate the barrier heights of such disordered systems. We reveal the mechanism that determines the Li diffusion in the amorphous layer of the system. Overall, we find such a 3D solid Li-S cathode can be practical, with sufficient large gravimetric and volumetric energy capacity, as well as the Li diffusion constant. It also solves many other common Li-S cathode problems, from Li polysulfide dissolution to electrical insulating, and structure instabilities.

25 ENERGY STORAGE↗
DOE OSTI2021

Balancing Interfacial Reactions to Achieve Long Cycle Life in High Energy Lithium Metal Batteries

Rechargeable lithium (Li) metal batteries have attracted wide attentions as the next generation energy storage technologies. However, simultaneously achieving high cell-level energy density and long cycle life in realistic batteries is still a great challenge. Here we investigate the cell degradation mechanisms of Li||LiNi0.6Mn0.2Co0.2O2 pouch cells using different, but representative cell configurations to understand the fundamental linkage among Li thickness, electrolyte depletion and the structure evolution of solid electrolyte interphase (SEI) layers. Different cell failure modes were discovered when tuning the anode to cathode capacity (N/P) ratio in compatible electrolyte. With a thick-Li anode (N/P ratio = 2.5), initial stable cycling is obtained because of the abundant Li supply from the anode together with an artificially inflated high Coulombic Efficiency, followed by a premature sudden cell death appears due to the enrichment of “ineffective SEI” which does not participate in the electrochemical reactions but keep increasing cell impedance. The anode-free cell (N/P 0:1) displays a steady capacity decay because cathode Li loss dominates from the beginning to the end of cell cycle life. An optimized thin-Li (N/P 1:1) well balances the Li consumption rate with the impedance buildup by minimizing the growth of ineffective SEI layer, thus decelerates cell polarization increasing and extends cycling. Contrary to conventional wisdoms, long cycle life is observed by using ultra thin-Li (20 µm) in balanced cells. A prototype 350 Wh kg-1 pouch cell (2.0 Ah) achieves over 600 long stable cycles with 76% capacity retention without sudden cell death.

Niu, Chaojiang↗
DOE OSTI2024

Spectroscopic investigation of early light emission from anode-initiated surface flashover in vacuum

Time-resolved optical emission spectroscopy is used to explore the early development of anode-initiated flashover in vacuum. An experimental apparatus for collecting flashover self-luminosity is introduced, which enables spatially resolved light collection from regions adjacent to the anode and cathode triple junctions. The emitted light is spectrally and temporally resolved utilizing an imaging spectrograph and a fast electronic shutter camera. The first light detectable from flashovers across both Rexolite and polytetrafluoroethylene (PTFE) insulators begins less than 10 ns prior to the flashover gap's impedance collapse and consists of faint broadband feature in primarily visible wavelengths. This suggests luminosity due to excitation in the solid, possibly occurring as a result of field emitted electrons. In the few nanoseconds leading up to and including the impedance collapse, the broadband spectrum grows in intensity and extends into the UV, eventually accompanied by a few emission lines of the insulator material. This is strong evidence that the early stages of anode-initiated flashover include surface layer breakdown of the insulator, as a contrast from cathode-initiated flashover, which is predominately an above-surface process. Spectra accumulated over longer exposures of PTFE flashovers indicate that, in the first few hundred nanoseconds after the impedance collapse, ions from the insulator material constitute the majority of the emission lines. Later, neutral and ionic metal species from the electrode contribute with similar prominence as well as molecular bands from diatomic carbon. Finally, a comparison is provided of the results of these studies to other spectroscopic investigations of vacuum flashover from the literature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Solid‐State Reaction Heterogeneity During Calcination of Lithium‐Ion Battery Cathode

Abstract During solid‐state calcination, with increasing temperature, materials undergo complex phase transitions with heterogeneous solid‐state reactions and mass transport. Precise control of the calcination chemistry is therefore crucial for synthesizing state‐of‐the‐art Ni‐rich layered oxides (LiNi 1‐x‐y Co x Mn y O 2 , NRNCM) as cathode materials for lithium‐ion batteries. Although the battery performance depends on the chemical heterogeneity during NRNCM calcination, it has not yet been elucidated. Herein, through synchrotron‐based X‐ray, mass spectrometry microscopy, and structural analyses, it is revealed that the temperature‐dependent reaction kinetics, the diffusivity of solid‐state lithium sources, and the ambient oxygen control the local chemical compositions of the reaction intermediates within a calcined particle. Additionally, it is found that the variations in the reducing power of the transition metals (i.e., Ni, Co, and Mn) determine the local structures at the nanoscale. The investigation of the reaction mechanism via imaging analysis provides valuable information for tuning the calcination chemistry and developing high‐energy/power density lithium‐ion batteries.

Chemistry↗
DOE OSTI2021

Valuation of Surface Coatings in High-Energy Density Lithium-ion Battery Cathode Materials

Artificial barriers, usually with either electrochemically active or inactive coating materials, are deployed on cathode material surfaces to mitigate detrimental side reactions by suppressing direct contact of cathode and electrolyte called surface coatings. These surface coatings are commonly known to increase the wettability of liquid electrolyte and reduce the interfacial charge transfer resistance. An important caveat is the selection of appropriate coating material with appropriate thickness for achieving enhanced electrochemical performance. As modern battery materials are increasingly developed with some type of surface coating, a careful and thorough examination of their role in mitigating the cycle life issues of cathode materials is paramount. Here, this comprehensive review article extensively covers the selection criteria of coating materials based on their chemical and physical properties and electrochemical functionalities. Additionally, the article discusses the concept of critical coating thickness and methods of achieving homogeneous coating architectures that deliver desired performance benefits. Furthermore, this comprehensive article summarizes the recent advancements, effectiveness, necessity of cathode surface coatings and identifies the key aspect of structure-property correlation between coating type/thickness and lithium-ion diffusion through coating layers as the linchpin that validates surface coating approaches especially for high capacity nickel-rich cathodes.

25 ENERGY STORAGE↗
DOE OSTI2021

Rapid charging made practical in graphite-based lithium batteries: surface-acoustic wave turbulent electrolyte mixing to overcome diffusion limited charging rates [Final Report]

One of the key limits in rapidly recharging a lithium-ion battery is the depletion of lithium ions within the electrolyte adjacent the anode during charging and long diffusion time to overcome this depletion. It also causes dendrite formation, inefficient use of the lithium, and battery degradation over many charge-discharge cycles. Because the liquid electrolyte remains quiescent and unmixed, this depletion layer’s depth rapidly grows to match the anode-cathode separation distance at even modest charge rates. The solution proposed by PI Prof. James Friend and Co-PI Prof. Ping Liu, both from the University of California, San Diego, is to mix the electrolyte and minimize the Li+ ion concentration gradient during charging. Even in the presence of the separator, the charging rate could then be significantly increased. They propose to accomplish this using surface acoustic wave (SAW)-driven acoustic streaming, a technique employing 10-mW fingernail-sized solid-state devices from the telecommunications industry to drive turbulent mixing to submicron length scales in a manner completely compatible with the typical 20700 and 18650 cells used in electric vehicles. 0.1. Turbulent acoustic streaming mixes the electrolyte during charging—even with separator Our proposed 100-MHz SAW device used to recirculate the electrolyte is compatible with lithium- ion battery electrochemistry, as it is made in our lab of single-crystal lithium niobate. Their solution is straightforward to drive from a DC power source alongside the signal provided during battery charging. The device is only needed during charging and does not consume power dur- ing battery discharge. Uniquely, SAW generates extreme accelerations of over 1 billion meters per second squared in the fluid, driving turbulent mixing from centimeter to submicron length scales, even through the porous separator materials that tend to be used in batteries, all while avoiding interfering with the anode’s solid electrolyte interphase layer that forms during use. By employing novel fluid mechanics, the investigators are proposing a new direction for battery research away from direct use of materials science and electrochemistry. The chemistry agnostic solution may be employed in any battery chemistry that makes use of liquid electrolytes, providing a broader transformative benefit to the battery research community. They are to produce a series of prismatic and 20700-cell sized 2 Ah batteries capable of being charged and discharged at least 500 times without more than 20% loss in battery capacity, and to provide analysis tools useful to the battery research and development community for adopting this approach for other battery chemistries and configurations.

25 ENERGY STORAGE↗
DOE OSTI2020

Carbon Support Microstructure Impact on High Current Density Transport Resistances in PEMFC Cathode

Cell voltages at high current densities (HCD) of an operating proton-exchange membrane fuel cell (PEMFC) cathode suffer from losses due to the local-O 2 and bulk-H + transport resistances in the catalyst layer. Particularly, the microstructure of high surface area carbon (HSC) support upon which both the platinum catalyst and ionomer are dispersed play a pivotal role in controlling the reactant transport to the active site in the catalyst layer. In this study, we perform a systematic analysis of the underlying microstructure of platinum-cobalt catalyst dispersed on various HSC supports in terms of their surface area and pore-size distribution. The carbon microstructure was found to strongly influence the PtCo nanoparticle dispersion, catalyst layer ionomer distribution and transport losses governing the performance at HCD. Catalyst layer electrochemical diagnostics carried out to quantify local-O 2 transport resistance and bulk-H + transport resistance in the cathode were found to be directly correlated to the micropore (<2 nm) and macropore (>8 nm) surface areas of the carbon support, respectively. Finally, a 1D-performance model has been developed to assimilate our understanding of the catalyst layer microstructure and transport resistances at HCD.

25 ENERGY STORAGE↗
DOE OSTI2022

Ultra-fast and Thick Boriding of Geothermal Casing to Enhance Reliability

Harnessing the heat that is continuously generated underneath the Earth’s crust (geothermal) is a clean and renewable source of energy. Geothermal energy can be used to heat and cool buildings, including greenhouses, and to generate electrical power. Compared to other renewable energy sources such as solar and wind, geothermal energy is more reliable because it is available all the time and versatile in its many forms of application and deployment. Nonetheless, the deployment and extensive use of geothermal energy still lags behind other renewable sources due to some technical, but mainly economic challenges. Upfront costs of geothermal power well development are relatively high. Some of this high cost is attributed to the use of expensive construction materials to ensure adequate performance during operation. For example, Inconel 625, super duplex 2507, and titanium alloy materials are used in downhole casings, piping, and other components exposed to brine solution to withstand harsh operating environments (high temperature and corrosive environments). Relatively low-cost carbon steel can be used in many of these components in geothermal power plants; however, they are susceptible to excessive corrosion, thereby limiting their useful lifespan. Ultra-fast boriding (UFB) surface treatment of carbon steel may drastically increase its corrosion resistance thereby providing a cost-effective material solution in geothermal applications. Scientists at Argonne National Laboratory (ANL) recently developed a technique to accelerate the boriding process using a high-temperature electrochemical process to produce relatively thick boride layers on various metal and alloy materials in minutes rather than the several hours it takes through the typical pack boriding process; hence, the process is designated UFB. The process uses molten borax salt at 900– 1000°C in an electrochemical cell in which the material to be borided is the cathode and a graphite plate is the anode. Continuous and durable boride layers with thicknesses of 100–300 µm have been produced on a variety of metals and alloys in one hour. Such a surface layer can indeed be a cost-effective pathway to prevent corrosion of casing materials in contact with the chemically aggressive and corrosive geothermal brine fluids.

15 GEOTHERMAL ENERGY↗