Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “content analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Phase-field simulations of gas density within bubbles under irradiation

Phase-field simulations are used to study the evolution of gas density within irradiation-induced bubbles. In our simulations, the dpa rate, gas production rate, and defect diffusivities are systematically varied to understand their effect on bubble nucleation rates, bubble densities, and the distribution of gas concentration within bubbles and in the solid regions. We find that gas densities within bubbles fluctuate drastically in the early nucleation stages, when growth rates are highest, but converge to steady-state values during the later coarsening stages. The steady-state gas densities within bubbles correspond with the ratio of total accumulated vacancy content divided by the total accumulated gas content, in agreement with a thermodynamic analysis concerning free-energy minimization.

36 MATERIALS SCIENCE↗

Growth of deuterium supersaturated surface layer with increasing ion flux and fluence in plasma-exposed tungsten

Deuterium supersaturated surface layer (DSSL) in tungsten, a few nm thick layer exhibiting extremely high deuterium content (> 5%), has been studied as a function of deuterium plasma ion flux and fluence. Tungsten samples were exposed at 400 K and deuterium ion energy of ∼ 60 eV. The deuterium ion flux spanned over an order of magnitude, being 7.3 × 10 20 , 4.2 × 10 21 , and 3.8 × 10 22 D/m 2 . The fluence ranged from 3.4 × 1024 to 3.4 × 1025 D/m2. The samples and their deuterium content were analyzed by nuclear reaction analysis (NRA), scanning transmission electron microscopy (STEM), and thermal desorption spectroscopy (TDS). The largest thickness of DSSL was found to be around 10.5 nm and was observed in the case of the highest exposure flux and fluence, whereas the layer was only about 3.8 nm thick in the case of the lowest value of the two parameters. The thickness of the DSSL was found to monotonically increase with both deuterium flux and fluence. Finally, similar to the thickness, the estimated D concentration seems to follow the same trend, increasing from the lowest value of around 3 at.% to the highest value of around 5 at.%.

Deuterium↗

Anion-dependent phase behavior of methylimidazolium-based ionic liquids mixed with water: Correlation between local molecular structure and mesoscale behaviors

The mesoscopic phase behavior of decylmethylimidazolium (C 10 mim) ionic liquids (ILs) bearing three monovalent anions—thiocyanate (SCN − ), nitrate (NO 3 − ), and chloride (Cl − )—mixed with water at relatively high IL contents (50–95 wt%) was investigated. Small-angle and wide-angle X-ray scattering (SAXS/WAXS) were employed to follow the evolution of both local and mesoscale structures across this composition range. In the absence of water, C 10 mimSCN and C 10 mimCl behaved as disordered liquids, whereas C 10 mimNO 3 spontaneously formed a hexagonally ordered cylindrical mesophase and displayed a sticky-solid macroscopic appearance. Upon addition of water, C 10 mimSCN remained a viscous liquid and only weakly ordered lamellar domains were observed. This limited ordering is attributed to the lack of hydrogen bonding and weak interaction energy between SCN − anions and C 10 mim + cations. In contrast, the trigonal-planar NO 3 − and point-like Cl − anions promoted the formation of well-defined hexagonal mesophases up to 35–45 wt% water. The formation of hydrogen bonding of the two anions with imidazolium ring protons likely enabled the creation of compact ion clusters that effectively exclude water molecules from the immediate vicinity of the IL aggregates. These findings demonstrate that the interaction energy between ion pairs dictate IL-water interactions and therefore control the transition from disordered liquids to ordered mesophases in IL/water mixtures with high IL contents. In conclusion, the combined SAXS/WAXS analysis reveals a correlation between local intermolecular structure and the emergence of mesoscopic order, providing a systematic framework for tailoring mesoscale structures in alkylimidazolium-based IL/water systems.

36 MATERIALS SCIENCE↗

Photoactive Excited States in Explosive Fe(II) Tetrazine Complexes: A Time-Dependent Density Functional Theory Study

Time-dependent density functional theory was used to investigate optical absorption of novel Fe(II) coordination complexes with tetrazine ligands. These octahedral compounds absorb near-infrared (NIR) light and can be applied as secondary explosives with low laser-initiation thresholds compared to pentaerythritol tetranitrate. Here in this paper, numerous ligand architectures are studied to determine relationships between molecular structure and optical absorption in order to tune the low-energy charge transfer (CT) band. Geometrical structures and vertical excitation energies calculated with the TPSSh density functional and 6-311G basis set are in excellent agreement with experiment, with a maximum deviation from UV–vis spectra of 0.10 eV. By altering molecular substituents of the ligand scaffold, the CT band can be tuned between 500 and 1100 nm. Additional conjugation in the ligand scaffold pushes the CT band into the NIR region of the spectrum. Triazolo-tetrazine ligands shift the CT band by approximately 0.70 eV relative to that of Fe(II) coordinated with bipyridine ligands. Oxygenated analogues of several compounds are also studied in order to predict optical response, while improving explosive performance. A natural population analysis suggests that the high nitrogen content of the ligand scaffolds in these energetic compounds lessens their metal-to-ligand charge transfer character compared to that of Fe(II) coordinated with bipyridine ligands. The proposed model quantum chemistry is used to establish structure–property relationships for optical properties in this class of materials in order to make optical initiation with conventional lasers a more feasible approach.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A tough and sustainable fiber-forming material from lignin and waste poly(ethylene terephthalate)

In this report we describe repurposing of recycled polyesters as a matrix for lignin-a biorefinery coproduct that is used as a solid fuel and needs to find higher value-to make sustainable high-performance thermoplastic materials. Brittle lignin oligomers, isolated from plant biomass, require a low-melting host polymer matrix to form a rigid and tough renewable material. We demonstrate controlled lignin dispersion and interfacial interactions in softened recycled polyethylene terephthalate (PET) using a simple solvent-free, melt-blending technique. To avoid lignin degradation and devolatilization during melt processing, it was thermally treated. Tall oil fatty acid was used to enable PET processability at low enough temperature to accommodate lignin without charring. Chemical analysis reveals reduction of aliphatic hydroxyl content from 2 mmol g –1 to 1.63 mmol g –1 and an increase of total phenolic hydroxyl moieties from 5.86 to 6.64 mmol g –1 and cleavage of β-O-4 ether linkages due to thermal treatment. Structural transformation of lignin macromolecules during heat treatment was further confirmed by an increase in molar mass and improved thermal stability. Interfacial interactions between lignin and PET were assessed from mechanical properties and thermal analyses. Thermal treatment not only helps to improve the stability of lignin but also slightly reduces the size of the dispersed lignin domains via favored interfacial interactions with the PET matrix. These methods improve mechanical properties of the material. Further, incorporation of lignin in the plasticized PET matrix increases the ductility in the blended products. Here, the method we discuss here utilizes industrial wastes and co-products, and it does not require solvent or toxic chemicals during the reactive extrusion process that yields complete conversion to products.

36 MATERIALS SCIENCE↗

Degradation characteristic of monoazo, diazo and anthraquinone dye by UV/H{sub 2}O{sub 2} process

In this study, the degradation characteristic of monoazo, diazo and anthraquinone dye by UV/H{sub 2}O{sub 2} process was evaluated based on the trend of color, chemical oxygen demand (COD) and total organic carbon (TOC) removal. Three types of dyes consist of monoazo, diazo and anthraquinone dyes were used to compare the degradation mechanism of the dyes. The UV/H{sub 2}O{sub 2} experiments were conducted in a laboratory scale cylindrical glass reactor operated in semi-batch mode. The UV/Vis characterization of monoazo, diazo and anthraquinone dye indicated that the rapid degradation of the dyes by UV/H{sub 2}O{sub 2} process is meaningful with respect to decolourization, as a result of the azo bonds and substitute antraquinone chromophore degradation. However, this process is not efficient for aromatic amines removal. The monoazo MO was difficult to be decolorized than diazo RR120 dye, which imply that number of sulphonic groups in the dye molecules determines the reactivity with hydroxyl radical. The increased in COD removal is the evidence for oxidation and decreased in carbon content of dye molecules. TOC removal analysis shows that low TOC removal of monoazo MO and diazo RR120, as compared to anthraquinone RB19 may indicate an accumulation of by-products that are resistant to the H{sub 2}O{sub 2} photolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic and structural effects of partial Ce substitution in Y b{sub 14}MnSb{sub 11}

Single crystals of Y b{sub 14−x}Ce{sub x}MnSb{sub 11} were grown from tin metal as a flux solvent with a maximum Ce incorporation of 0.6. The phases with x ∼ 0.1–0.6 crystallize in the tetragonal Ca{sub 14}AlSb{sub 11} structure type with I4{sub 1}/acd space group. In this structure type, there are 4 crystallographically unique Yb sites and the structure can be described according to the Zintl concept as containing 14Y b{sup 2+} + [MnSb{sub 4}]{sup 9−} + [Sb{sub 3}]{sup 7−} + 4Sb{sup 3−}. For x > 0.3, Ce is incorporated on specific Yb sites in the structure as a function of x, initially at x = 0.3 on the Yb(2) site followed by Yb(4) at higher values of x. These sites have the largest volume as indicated by Hirshfeld surface analysis of chemical bonding. As Ce content is increased, the ferromagnetic ordering temperatures decrease and effective paramagnetic moments increase. The magnetic ordering temperatures decrease from the undoped T{sub C} of 50 K until x ∼ 0.4, where the lowest T{sub C} of 39 K is reached. As the additional electron introduced by Ce{sup 3+} fills the hole associated with [MnSb{sub 4}]{sup 9−}, the screening of the Mn moments is reduced. This leads to an increase in overall moment attributed to Mn in addition to the moment from the Ce{sup 3+}f electron. Increasing Ce content also leads to an increase in electrical resistivity, an expected effect from reducing the carrier concentration.

36 MATERIALS SCIENCE↗

Characteristics of InGaAsBi with various lattice mismatches on InP substrate

To develop bismuth-containing infrared optoelectronic devices, InGaAsBi/InP films with different lattice mismatches have been investigated. The lattice mismatch was tailored by changing the Bi content in conjunction with the In content simultaneously. X-ray diffraction analysis revealed that alloy lattice constants have been extended positively by incorporation of Bi into the crystal lattice. Electrical and optical characteristics were investigated by Hall-effect, optical absorption and photoluminescence measurements. A bandgap shrinking of about 56.4 meV/Bi% was deduced by X-ray diffraction and optical absorption measurements. From the excitation dependent photoluminescence measurement at 10 K, the donor-acceptor pair emissions were inferred for samples containing moderate and high levels of Bi. The temperature dependence of the PL peak energy is as small as 0.06 meV/K in In{sub 0.5}Ga{sub 0.5}As{sub 0.987}Bi{sub 0.013}, which is fairly low compared with that of In{sub 0.5}Ga{sub 0.5}As.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Composition-dependent apparent activation-energy and sluggish grain-growth in high entropy alloys

Experimental results reveal that the apparent activation-energy for grain-growth in an fcc-based Al x CoCrFeNi high entropy alloy (HEA) system increases from 179 to 486 kJ/mol when the Al content increases from x = 0.1 to 0.3. These unexpectedly high apparent activation-energy values can be potentially attributed to solute clustering within the fcc solid-solution phase that develops with increasing Al content in this HEA. Detailed microstructural analysis using atom-probe tomography and density functional theory (DFT) calculations strongly indicate the presence of such nanoscale clusters. This phenomenon can change grain-growth from a classical solute-drag regime to a much more sluggish cluster-drag based mechanism in these HEAs.

36 MATERIALS SCIENCE↗

SUNSPOT ROTATION, FLARE ENERGETICS, AND FLUX ROPE HELICITY: THE HALLOWEEN FLARE ON 2003 OCTOBER 28

We study the X17 eruptive flare on 2003 October 28 using Michelson Doppler Imager observations of photospheric magnetic and velocity fields and TRACE 1600 A images of the flare in a three-dimensional model of energy buildup and release in NOAA 10486. The most dramatic feature of this active region is the 123{sup 0} rotation of a large positive sunspot over 46 hr prior to the event. We apply a method for including such rotation in the framework of the minimum current corona model of the buildup of energy and helicity due to the observed motions. We distinguish between helicity and energy stored in the whole active region and that released in the flare itself. We find that while the rotation of a sunspot contributes significantly to the energy and helicity budgets of the whole active region, it makes only a minor contribution to that part of the region that flares. We conclude that in spite of the fast rotation, shearing motions alone store sufficient energy and helicity to account for the flare energetics and interplanetary coronal mass ejection helicity content within their observational uncertainties. Our analysis demonstrates that the relative importance of shearing and rotation in this flare depends critically on their location within the parent active region topology.

79 ASTRONOMY AND ASTROPHYSICS↗

Setting the H-mode pedestal structure: variations of particle source location using gas puff and pellet fueling

Experiments in DIII-D show that a particle source location inside the top of the H-mode pedestal (pellets) maintains a higher pedestal pressure than an edge source (gas fueling) through a widening of the electron temperature pedestal with reduction of the temperature gradient. The effect of these two fueling schemes on the H-mode pedestal structure was examined in DIII-D by comparing controlled pellet-fueled and gas-fueled discharges across a fueling scan up to 40 torr 1 s –1 . High resolution electron profiles reveal that gas fueling lowers the pedestal pressure as the density profile shifts radially outwards and the separatrix density increases, while pellet fueling maintains a constant pedestal pressure. The neutral source locations from pellets and gas are determined with the PELLET and UEDGE codes, respectively, and quantify the particle source localization. Pellets provide significant ionization inside the pedestal top while gas puffing localizes ionization in the scrape-off-layer and pedestal foot, broadly consistent with the density profile structure influenced by the source. ELMs are observed to increase in frequency and reduce impurity content as fueling is increased. Stability analysis with ELITE shows that both conditions are near the type-I ELM corner of the peeling–ballooning stability diagram, which is altered significantly by the introduction of pellets. Since transport mechanisms are not observed to change substantially with particle source location, wider pedestals allow the pellet-fueled discharges to retain higher pedestal temperatures at similar pedestal densities. EPED1 is tested to capture the pedestal pressure, under-predicting the height with pellets and over-predicting the height with gas by ~15%. Overall, these results have important implications for future reactors where pellet fueling will be the primary particle source due to an opaque scrape-off-layer by showing that the neutral source location plays a role in setting the structure of the H-mode pedestal.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observations of wall conditioning by means of boron powder injection in DIII-D H-mode plasmas

In this paper, we report observations from the DIII-D tokamak indicating that boron (B) powder injection in tokamak plasmas improves wall conditions similarly to glow discharge boronization (GDB). Isotopically enriched B powder (B 11 > 95%) was introduced gravitationally in a sequence of H-mode plasma discharges at rates up to ~160 mg s -1 for durations up to 3 s. Boron injection to cumulative amounts ≤0.1 g appeared to improve wall conditions similarly to boronization, with indications of reduced wall fueling, reduced recycling at the outer strike point and reduced impurity content at breakdown. Post-mortem analysis of graphite samples exposed to far scrape-off layer plasma fluxes during boron injection confirm the formation of a B-C layer, with average surface composition B:C ~ 1. The results suggest that injecting boron-rich powders in tokamak plasmas can effectively replenish boron films on carbon plasma facing components to improve wall conditions and extend the duration of the beneficial effects of GDB.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quench-Spot Detection for Superconducting Accelerator Cavities Via Flow Visualization in Superfluid Helium-4

Superconducting radio-frequency (SRF) cavities, cooled by superfluid helium-4 (He II), are key components in modern particle accelerators. Quenches in SRF cavities caused by Joule heating from local surface defects can severely limit the maximum achievable accelerating field. Existing methods for quench-spot detection include temperature mapping and second-sound triangulation. These methods are useful but also have known limitations. Here we describe an alternative method for surface quench-spot detection by visualizing the heat transfer in He II via tracking He2 molecular tracer lines. A proof-of-concept experiment is conducted, in which a miniature heater mounted on a plate is pulsed on to simulate a surface quench spot. A He2 tracer line created nearby the heater deforms due to the counterflow heat transfer in He II. By analyzing the tracer-line deformation, we well reproduce the heater location within a few hundred microns, which clearly demonstrates the feasibility of this alternative technology. Our analysis also reveals that the heat content transported in He II is only a small fraction of the total input heat energy. We show that the remaining energy is essentially consumed in the formation of a cavitation zone near the heater. By estimating the size of this cavitation zone, we discuss how the existence of the cavitation zone may explain a decades-long puzzle observed in many past second-sound triangulation experiments.

43 PARTICLE ACCELERATORS↗

Toward a unified description of hadro- and photoproduction: S-wave {pi}- and {eta}-photoproduction amplitudes

The Chew-Mandelstam (CM) parametrization, which has been used extensively in the two-body hadronic sector, is generalized in this exploratory paper to the electromagnetic sector by simultaneous fits to the {pi}- and {eta}-photoproduction S-wave multipole amplitudes for center-of-mass energies from the pion threshold through 1.61 GeV. We review the CM parametrization in detail to clarify the theoretical content of the said hadronic amplitude analysis and to place the proposed generalized said electromagnetic amplitudes in the context of earlier employed parametrized forms. The parametrization is unitary at the two-body level, which employs four hadronic channels and the {gamma}N electromagnetic channel. We compare the resulting fit to the maid parametrization and find qualitative agreement; although, numerically, the solution is somewhat different. Applications of the extended parametrization to global fits of the photoproduction data and to global fits of the combined hadronic and photoproduction data are discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Pinning Characteristics of Zr and Hf- Added REBCO Coated Conductors Made by Advanced MOCVD in Low-to-High Magnetic Fields

BaMO 3 (M=Zr, Hf) pinning centers introduced in REBa 2 Cu 3 O 7-x (REBCO and RE = rare earth) coated conductors yield superior performance in high magnetic fields. We present the critical current density J c over a temperature range of 4.2-77 K and magnetic fields of 0-14 T (B || c-axis), of 5-15 mol.% Zr- and Hf-added REBCO 4+ μm thick film tapes fabricated by advanced metal organic chemical vapor deposition (A-MOCVD). The morphology of self-assembled BMO nanorods aligned along c-axis is found to be dependent on the Zr/Hf content. We also observe a correlation between the density of RE 2 O 3 in-plane nano-precipitates and the continuity and concentration of BMO nanorods in films of different Ba content. It is found that the (Ba+M)/Cu (M=Zr, Hf) content in REBa 2 Cu 3 O 7-x affects the shape of pinning force density curves over a wide magnetic field range and temperatures below 20 K. Another remarkable observation is the similarity in the critical current properties of Hf and Zr -added REBCO films as function of (Ba+M)/Cu content at intermediate to high range of (Ba+M)/Cu content. As a result, a quantitative analysis of pinning efficiency and correlation with the microstructure of Zr and Hf- added REBCO coated conductors is discussed.

2G high-temperature superconductor (2G-HTS)↗

Reconstructing f ( T ) gravity and exploring the torsion driven warm inflationary cosmology

The current paper reports an investigation of a warm inflationary scenario in the context of f(T) gravity for a spatially flat FLRW universe. In our model, inflation is driven purely by the torsional sector of f(T) gravity, without introducing any additional scalar fields. We focus on the high dissipative regime (R >> 1), reconstruct the Hubble parameter as a function of the e-folding number N, and derive the slow-roll parameters ε 1 (N) and ε 2 (N). The study has encapsulated the dynamics of inflation and its duration under strong dissipation. The dissipative coefficient Γ is modeled with a temperature-dependent power-law form, linking the inflationary dynamics to thermal corrections and the particle content of the early universe. The analysis has affirmed that the torsion-induced energy density ρ T successfully transitions to radiation energy density ρ rad , facilitating a graceful exit from inflation. Finally, we have validated our model by comparing the scalar spectral index and tensor-to-scalar ratio with Planck 2018 results, demonstrating consistency within observational bounds. Additionally, it is verified that the thermal domination condition T * /H > 1 and the torsion dominance condition ρ T /ρ rad > 1 are satisfied.

Ghosh, Moli [Amity University, Kolkata (India); Mr↗

Bioinformatics Resource Manager: A systems biology web tool for microRNA and omics data integration

Background: The Bioinformatics Resource Manager (BRM) is a web-based tool developed to facilitate identifier conversion and data integration for Homo sapiens (human), Mus musculus (mouse), Rattus norvegicus (rat), Danio rerio (zebrafish), and Macaca mulatta (macaque), as well as perform orthologous conversions among the supported species. In addition to providing a robust means of identifier conversion, BRM also incorporates a suite of miRNA-target databases upon which to query target genes or to perform reverse target lookups using gene identifiers. Results: BRM has the capability to perform cross-species identifier lookups across common identifier types, directly integrate datasets across platform or species by performing identifier retrievals in the background, and retrieve miRNA targets from multiple databases simultaneously and integrate the resulting gene targets with experimental mRNA data. Here we use workflows provided in BRM to integrate RNAseq data across species to identify common biomarkers of exposure after treatment of human lung cells and zebrafish to benzo[a]pyrene (BAP). We further use the miRNA Target workflow to experimentally determine the role of miRNAs as regulators of BAP toxicity and identify the predicted functional consequences of miRNA-target regulation in our system. The output from BRM can easily and directly be uploaded to freely available visualization tools for further analysis. From these examples, we were able to identify an important role for several miRNAs as potential regulators of BAP toxicity in human lung cells associated with cell migration, cell communication, cell junction assembly and regulation of cell death. Conclusions: Overall, BRM provides bioinformatics tools to assist biologists having minimal programming skills with analysis and integration of high-content omics’ data from various transcriptomic and proteomic platforms. BRM workflows were developed in Java and other open-source technologies and are served publicly using Apache Tomcat at https://cbb.pnnl.gov/brm/.

bioinformatics, MicroRNA, systems biology, Genomic↗