SEARCH · Engineering Papers

Results for “Synthetic Fuel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

All sources NASA NTRS DOE OSTI

NASA NTRS2019

A Suite of High-Resolution Atmospheric Carbon Dioxide Simulations in Support of the OCO-3 Snapshot Area Mapping (SAM) Mode Observation: PSU-WRF, CSU-OLAM and NASA GEOS

Cities and power plants are responsible more than 70% of GHG emissions. The emissions from the subnational localized sources need to be accurately quantified and properly managed in order to achieve the Paris Climate Agreement goals. The accurate estimation of these emission is also crucial for assessing the capacity of natural sinks to uptake the carbon released into the atmosphere that ultimately defines our emission allowance for the 1.5 or 2.0 degree temperature goals. New data collected by the Orbiting Carbon Observatory 3 (OCO-3) Snapshot Area Mapping (SAM) observations should provide a tremendous new opportunity for us to study CO2 emissions from targeted large localized sources, such as cities, power plants and beyond. Since 2018 (prior to the OCO-3 launch), we have studied the observational strategies for the SAM mode observation in order to collect the useful data for estimating CO2 emissions from target sources. To maximize the benefit of the SAM mode observation data for quantifying CO2 emission, it is important to define how to observe the localized sources depending on the local environmental and emission specificities. We employ a suite of state-of-the-art CO2 modeling systems, such as PSU's WRF-CO2, CSU's OLAM and NASA's GEOS models. All of these CO2 modeling systems are prescribedwith the high-resolution fuel CO2 emission estimates from the ODIAC data product to achieve realistic urban CO2 variations. We focus on cities with established ground-based observation networks, such as Los Angeles, Indianapolis, and Paris. We have examined the urban emission signal detectability in response to the influence of local background conditions that can observed by the SAM and biospheric contributions that will be a new challenge for urban emission inverse estimation. Based on the results of our simulation experiments, we plan to propose city-specific observation strategies. Upon the availability of the OCO-3 data, we will attempt to estimate city emissions using inverse models. We also developed synthetic OCO-3 data using NASA's GEOS5 model, which should be useful to assess the utility of the OCO-3 data in combination with data collected by carbon satellites in other orbits, such as NASA's OCO-2 and Japanese GOSAT-1/2. The synthetic data also provide an opportunity to study the errors due to clouds and aerosols, which have been not fully studied in the past.

Oda, Tomohiro↗

NASA NTRS2012

Mapping of CO2 at High Spatiotemporal Resolution using Satellite Observations: Global distributions from OCO-2

Satellite observations of CO2 offer new opportunities to improve our understanding of the global carbon cycle. Using such observations to infer global maps of atmospheric CO2 and their associated uncertainties can provide key information about the distribution and dynamic behavior of CO2, through comparison to atmospheric CO2 distributions predicted from biospheric, oceanic, or fossil fuel flux emissions estimates coupled with atmospheric transport models. Ideally, these maps should be at temporal resolutions that are short enough to represent and capture the synoptic dynamics of atmospheric CO2. This study presents a geostatistical method that accomplishes this goal. The method can extract information about the spatial covariance structure of the CO2 field from the available CO2 retrievals, yields full coverage (Level 3) maps at high spatial resolutions, and provides estimates of the uncertainties associated with these maps. The method does not require information about CO2 fluxes or atmospheric transport, such that the Level 3 maps are informed entirely by available retrievals. The approach is assessed by investigating its performance using synthetic OCO-2 data generated from the PCTM/ GEOS-4/CASA-GFED model, for time periods ranging from 1 to 16 days and a target spatial resolution of 1deg latitude x 1.25deg longitude. Results show that global CO2 fields from OCO-2 observations can be predicted well at surprisingly high temporal resolutions. Even one-day Level 3 maps reproduce the large-scale features of the atmospheric CO2 distribution, and yield realistic uncertainty bounds. Temporal resolutions of two to four days result in the best performance for a wide range of investigated scenarios, providing maps at an order of magnitude higher temporal resolution relative to the monthly or seasonal Level 3 maps typically reported in the literature.

Hammerling, Dorit M.↗

DOE OSTI2020

Supported and coordinated single metal site electrocatalysts

The ever-increasing global environmental and energy crisis issues necessitates technological innovation, especially in the development of renewable energy-related devices, such as electrochemical energy conversion and storage technologies, including fuel cells, water electrolyzers, and CO 2 electrolyzers. Reliable and sustainable energy conversion devices are highly dependent on engineering of electrocatalysts. Furthermore, state-of-the-art electrocatalysts for these electrochemical conversion systems are usually platinum group metal (PGM)-based nanoparticles with high cost, which has sparked intensive research on atomically dispersed single metal site electrocatalysts for decreasing metal loadings and boosting catalytic efficiencies by taking advantage of their inherent electronic effects, quantum size effects, and metal-support interactions. In this review, we first introduced the intrinsic active site identification and stabilization, followed by addressing the mutual metal-support interactions, and most important, their correlations with catalytic properties. Next, the advances in synthetic strategies and characterization techniques for single metal site electrocatalysts are highlighted. Additionally, recent advances in single metal site electrocatalysts designs for applications in electrochemical conversion reactions are also presented. Finally, remaining challenges and a forward-looking perspective on this field of research are provided.

25 ENERGY STORAGE↗

DOE OSTI2022

Utilization of lignocellulosic biofuel conversion residue by diverse microorganisms

Lignocellulosic conversion residue (LCR) is the material remaining after deconstructed lignocellulosic biomass is subjected to microbial fermentation and treated to remove the biofuel. Technoeconomic analyses of biofuel refineries have shown that further microbial processing of this LCR into other bioproducts may help offset the costs of biofuel generation. Identifying organisms able to metabolize LCR is an important first step for harnessing the full chemical and economic potential of this material. In this study, we investigated the aerobic LCR utilization capabilities of 71 Streptomyces and 163 yeast species that could be engineered to produce valuable bioproducts. The LCR utilization by these individual microbes was compared to that of an aerobic mixed microbial consortium derived from a wastewater treatment plant as representative of a consortium with the highest potential for degrading the LCR components and a source of genetic material for future engineering efforts. We analyzed several batches of a model LCR by chemical oxygen demand (COD) and chromatography-based assays and determined that the major components of LCR were oligomeric and monomeric sugars and other organic compounds. Many of the Streptomyces and yeast species tested were able to grow in LCR, with some individual microbes capable of utilizing over 40% of the soluble COD. For comparison, the maximum total soluble COD utilized by the mixed microbial consortium was about 70%. This represents an upper limit on how much of the LCR could be valorized by engineered Streptomyces or yeasts into bioproducts. To investigate the utilization of specific components in LCR and have a defined media for future experiments, we developed a synthetic conversion residue (SynCR) to mimic our model LCR and used it to show lignocellulose-derived inhibitors (LDIs) had little effect on the ability of the Streptomyces species to metabolize SynCR. We found that LCR is rich in carbon sources for microbial utilization and has vitamins, minerals, amino acids and other trace metabolites necessary to support growth. Testing diverse collections of Streptomyces and yeast species confirmed that these microorganisms were capable of growth on LCR and revealed a phylogenetic correlation between those able to best utilize LCR. Identification and quantification of the components of LCR enabled us to develop a synthetic LCR (SynCR) that will be a useful tool for examining how individual components of LCR contribute to microbial growth and as a substrate for future engineering efforts to use these microorganisms to generate valuable bioproducts.

09 BIOMASS FUELS↗

DOE OSTI2021

A novel machine learning based identification of potential adopter of rooftop solar photovoltaics

With the proliferation of rooftop solar photovoltaic installations, there is a need to proactively predict consumer potential for solar photovoltaic adoption, for improved electric utility planning and operation. Traditional analytical modeling approaches are limited to a few survey features and a larger part of the survey would remain untouched by the decision model. This article presents a novel, data-driven modeling approach that strategically prunes a large set of consumer profile features using a machine learning framework to train a model for predicting potential solar adoption. The approach utilizes the Gradient Boosting Decision Tree model through a Light Gradient Boosting framework that improves significantly over the poor prediction accuracy of the existing approaches. Model training using focal-loss based supervision is used to overcome the difficulty in identifying the potential adopters that is inherent in conventional data-driven models. In addition, to overcome possible data sparsity in a limited survey sample, a Generative Adversarial Network is presented to create synthetic user samples and its effectiveness on model performance is assessed. A Bayesian optimization approach is used to systematically arrive at the hyperparameters of the proposed model. Validation of the presented approach on a survey data collected by the National Rural Electric Cooperative Association in Virginia in 2018 demonstrates the excellent predictive capability of the machine learning based approach to modeling solar adoption reliably.

14 SOLAR ENERGY↗

DOE OSTI2020

Valorization of CO 2 through lithoautotrophic production of sustainable chemicals in Cupriavidus necator

Coupling recent advancements in genetic engineering of diverse microbes and gas-driven fermentation provides a path toward sustainable commodity chemical production. Cupriavidus necator H16 is a suitable species for this task because it effectively utilizes H 2 and CO 2 and is genetically tractable. Here, we demonstrate the versatility of C. necator for chemical production by engineering it to produce three products from CO 2 under lithotrophic conditions: sucrose, polyhydroxyalkanoates (PHAs), and lipochitooligosaccharides (LCOs). We engineered sucrose production in a co-culture system with heterotrophic growth 30 times that of WT C. necator. We engineered PHA production (20-60% DCW) and selectively altered product composition by combining different thioesterases and phaCs to produce copolymers directly from CO 2 . And, we engineered C. necator to convert CO 2 into the LCO, a plant growth enhancer, with titers of ~1.4 mg/L—equivalent to yields in its native source, Bradyrhizobium. Here, we applied the LCOs to germinating seeds as well as corn plants and observed increases in a variety of growth parameters. Taken together, these results expand our understanding of how a gas-utilizing bacteria can promote sustainable production.

09 BIOMASS FUELS↗

DOE OSTI2020

Recent Advances in Domesticating Non-model Microorganisms

Non-model microorganisms have been increasingly explored as microbial cell factories for production of chemicals, fuels, and materials owing to their unique physiology and metabolic capabilities. Yet, these microorganisms often lack facile genetic tools for strain development, which hinders their adoption as production hosts. In this review, we describe recent advances in domestication of non-model microorganisms, including bacteria, actinobacteria, cyanobacteria, yeast, and fungi, with a focus on the development of genetic tools. Furthermore, we highlight some successful applications of non-model microorganisms as microbial cell factories.

synthetic biology↗

DOE OSTI2020

Synthetic methylotrophs

The present invention provides a non-naturally occurring microbe capable of growing in a medium comprising methanol, comprising a heterologous polynucleotide encoding a heterologous methanol dehydrogenase (MDH) derived from a Corynebacterium organism (Cor), wherein the MDH is expressed in the microbe, and wherein the MDH exhibits a Km of no more than 3 mM for methanol. Also provided are uses of the non-naturally occurring microbe for oxidizing methanol and producing a metabolite as well as the preparation of the non-naturally occurring microbe.

09 BIOMASS FUELS↗

NASA NTRS2017

Comparisons Between NO PLIF Imaging and CFD Simulations of Mixing Flowfields for High-Speed Fuel Injectors

The current work compares experimentally and computationally obtained nitric oxide (NO) planar laser induced fluorescence (PLIF) images of the mixing flowfields for three types of high-speed fuel injectors: a strut, a ramp, and a rectangular flushwall. These injection devices, which exhibited promising mixing performance at lower flight Mach numbers, are currently being studied as a part of the Enhanced Injection and Mixing Project (EIMP) at the NASA Langley Research Center. The EIMP aims to investigate scramjet fuel injection and mixing physics, and improve the understanding of underlying physical processes relevant to flight Mach numbers greater than eight. In the experiments, conducted in the NASA Langley Arc-Heated Scramjet Test Facility (AHSTF), the injectors are placed downstream of a Mach 6 facility nozzle, which simulates the high Mach number air flow at the entrance of a scramjet combustor. Helium is used as an inert substitute for hydrogen fuel. Both schlieren and PLIF techniques are applied to obtain mixing flowfield flow visualizations. The experimental PLIF is obtained by using a UV laser sheet to interrogate a plane of the flow by exciting fluorescence from the NO molecules, which are present in the AHSTF air. Consequently, the absence of signal in the resulting PLIF images is an indication of pure helium (fuel). The computational PLIF is obtained by applying a fluorescence model for NO to the results of the Reynolds-averaged simulations (RAS) of the mixing flow field carried out using the VULCAN-CFD solver. This approach is required because the PLIF signal is a nonlinear function of not only NO concentration, but also pressure, temperature, and the flow velocity. This complexity allows additional flow features to be identified and compared with those obtained from the computational fluid dynamics (CFD) simulations, however, such comparisons are only semiquantitative. Three-dimensional image reconstruction, similar to that used in magnetic resonance imaging, is also used to obtain images in the streamwise and spanwise planes from select cross-stream PLIF plane data. Synthetic schlieren is also computed from the RAS data. Good agreement between the experimental and computational results provides increased confidence in the CFD simulations for investigations of injector performance.

Drozda, Tomasz G.↗

DOE OSTI2022

A knock-on deuteron imager for measurements of fuel and hotspot asymmetry in direct-drive inertial confinement fusion implosions (invited)

A knock-on deuteron imager (KoDI) has been implemented to measure the fuel and hotspot asymmetry of cryogenic inertial confinement fusion implosions on OMEGA. Energetic neutrons produced by D–T fusion elastically scatter (“knock on”) deuterons from the fuel layer with a probability that depends on ρR. Deuterons above 10 MeV are produced by near-forward scattering, and imaging them is equivalent to time-integrated neutron imaging of the hotspot. Deuterons below 6 MeV are produced by a combination of side scattering and ranging in the fuel, and encode information about the spatial distribution of the dense fuel. Here, the KoDI instrument consists of a multi-penumbral aperture positioned 10–20 cm from the implosion using a ten-inch manipulator and a detector pack at 350 cm from the implosion to record penumbral images with magnification of up to 35×. Range filters and the intrinsic properties of CR-39 are used to distinguish different charged-particle images by energy along the same line of sight. Image plates fielded behind the CR-39 record a 10 keV x-ray image using the same aperture. A maximum-likelihood reconstruction algorithm has been implemented to infer the source from the projected penumbral images. The effects of scattering and aperture charging on the instrument point-spread function are assessed. Synthetic data are used to validate the reconstruction algorithm and assess an appropriate termination criterion. Significant aperture charging has been observed in the initial experimental dataset, and increases with aperture distance from the implosion, consistent with a simple model of charging by laser-driven EMP.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Toward sustainable production of value‐added bioenergy and industrial oils in oilseed and biomass feedstocks

Abstract Plant fatty acids are used for food, feed, fuel, and industrial materials. Structurally and chemically diverse fatty acids, referred to as unusual or specialized fatty acids, are found in the seed oils of diverse plant species. Many unusual fatty acids have potential use as alternative and renewable sources of biofuels and bio‐based industrial feedstocks due to their variant structures' physical or functional properties. Oils enriched in these fatty acids can increase the value of oilseed crops and provide co‐products that can be readily extracted from lignocellulosic materials in biomass crops. Here, we describe recent progress in strategies for enhancement of oil production and quality in oilseed crops and the extension of this knowledge for metabolic engineering of biomass crops. Successful implementation of these strategies, in part, through the use of emerging synthetic biology tools, will provide added product value for the economic sustainability of biomass crops as bioenergy feedstocks.

Park, Kiyoul↗

DOE OSTI2020

Atomically dispersed metal–nitrogen–carbon catalysts for fuel cells: advances in catalyst design, electrode performance, and durability improvement

The urgent need to address the high-cost issue of proton-exchange membrane fuel cell (PEMFC) technologies, particularly for transportation applications, drives the development of simultaneously highly active and durable platinum group metal-free (PGM-free) catalysts and electrodes. The past decade has witnessed remarkable progress in exploring PGM-free cathode catalysts for the oxygen reduction reaction (ORR) to overcome sluggish kinetics and catalyst instability in acids. Among others, scientists have identified the newly emerging atomically dispersed transition metal (M: Fe, Co, or/and Mn) and nitrogen co-doped carbon (M–N–C) catalysts as the most promising alternative to PGM catalysts. Here, we provide a comprehensive review of significant breakthroughs, remaining challenges, and perspectives regarding the M–N–C catalysts in terms of catalyst activity, stability, and membrane electrode assembly (MEA) performance. A variety of novel synthetic strategies demonstrated effectiveness in improving intrinsic activity, increasing active site density, and attaining optimal porous structures of catalysts. Rationally designing and engineering the coordination environment of single metal MN x sites and their local structures are crucial for enhancing intrinsic activity. Increasing the site density relies on the innovative strategies of restricting the migration and agglomeration of single metal sites into metallic clusters. Relevant understandings provide the correlations among the nature of active sites, nanostructures, and catalytic activity of M–N–C catalysts at the atomic scale through a combination of experimentation and theory. Current knowledge of the transferring catalytic properties of M–N–C catalysts to MEA performance is limited. Rationally designing morphologic features of M–N–C catalysts play a vital role in boosting electrode performance through exposing more accessible active sites, realizing uniform ionomer distribution, and facilitating mass/proton transports. We outline future research directions concerning the comprehensive evaluation of M–N–C catalysts in MEAs. The most considerable challenge of current M–N–C catalysts is the unsatisfied stability and rapid performance degradation in MEAs. Therefore, we further discuss practical methods and strategies to mitigate catalyst and electrode degradation, which is fundamentally essential to make M–N–C catalysts viable in PEMFC technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2008

Onboard Data Processor for Change-Detection Radar Imaging

A computer system denoted a change-detection onboard processor (CDOP) is being developed as a means of processing the digitized output of a synthetic-aperture radar (SAR) apparatus aboard an aircraft or spacecraft to generate images showing changes that have occurred in the terrain below between repeat passes of the aircraft or spacecraft over the terrain. When fully developed, the CDOP is intended to be capable of generating SAR images and/or SAR differential interferograms in nearly real time. The CDOP is expected to be especially useful for understanding some large-scale natural phenomena and/or mitigating natural hazards: For example, it could be used for near-real-time observation of surface changes caused by floods, landslides, forest fires, volcanic eruptions, earthquakes, glaciers, and sea ice movements. It could also be used to observe such longer-term surface changes as those associated with growth of vegetation (relevant to estimation of wildfire fuel loads). The CDOP is, essentially, an interferometric SAR processor designed to operate aboard a radar platform.

Lou, Yunling↗

DOE OSTI2024

Efficient crystal structure materials as reactive sorbent for the CO 2 and CH 4 adsorption and storage

The efficient dirubidium cobalt bis(dihydrogendiphosphate) dihydrate compound is successfully synthesized in a solution and used as a reactive sorbent for the CO 2 and CH 4 gases adsorption and storage. A crystal of this Rb 2 Co(H 2 P 2 O 7 ) 2 ·2H 2 O compound has been isolated and characterized by single X-ray diffraction analysis and was found to crystallize in the triclinic system (P$\overline{1}$) with the cell parameters (Å): 6.980(1), 7.370(1), 7.816(1), 81.74(1), 70.35(1), 86.34(1); V = 374.68(9) Å3, Z = 2. The crystal-packing consists of a three-dimensional framework made upon corners and edges sharing of [RbO 7 ], [H 2 P 2 O 7 ] and [CoO 6 ] entities, furthermore linked by a network of H-bonds. The UV–Vis spectroscopy revealed usual transitions between the ground state 4T1g and the upper levels 4T2g, 4A2g and 4T1g (P). Moreover, the CO 2 and CH 4 gases sorption measurements were successfully performed at two different temperatures (25 and 45 °C) and various pressures ranging from vacuum to 50 bar. Our results show that rate of CO 2 and CH 4 capturing was 3.10 mmol/g and 2.35 mmol/g at temperature 25 °C and pressure 50 bar, respectively. This compound showed a clear potential for CO 2 /CH 4 adsorption and storage thereby paving the way towards its exploration and adaptation for capturing and collecting carbon dioxide and greenhouse gases from the air, and their conversion into hydrocarbon fuels using existing mature technologies. We have also conducted density functional theory calculations to study the CO 2 and CH 4 adsorption properties of Rb 2 Co(H 2 P 2 O 7 ) 2 ·2H 2 O. The simulation results show enhanced adsorption of both types of molecules on the surface of the material.

36 MATERIALS SCIENCE↗

DOE OSTI2025

AUTOIGNITION DELAY TIMES FOR REFORMATE GAS MIXTURES FROM METHANE GAS ENGINES

Methane slip is a prominent issue in natural gas reciprocating engines that are used in transportation and marine applications. The incomplete combustion that results in methane slip can be resolved with the introduction of hydrogen within the combustion mixture to improve methane oxidation and further enable combustion within the engine crevices where methane has previously remained unreacted. Steam methane reforming (SMR) is a common method used to produce hydrogen and can be used to design an onboard device to reduce methane slip from reciprocating engines. The development of this reformer device requires the validation of high-fidelity chemical kinetic models at the low temperatures of the crevice volumes of these engines. In this work, auto-ignition data is obtained using a shock tube at lean (φ—0.714 or λ—1.4) and stoichiometric (φ, λ = 1) equivalence ratios spanning a temperature range of 1042–1234 K at the 80-bar operating pressure of the test engine. Blends of methane, hydrogen, and reformate products from the SMR reaction are shock-heated in synthetic air, with the ignition delay time measured using an OH* chemiluminescence detector at 310 nm and a CH* detector at 430 nm. The experimental results are compared to several state-of-the-art chemical kinetic mechanisms from the literature. In general, most of the mechanisms show very good agreement with experiments at higher temperatures, with simulation results showing little deviation from experiments at lower temperatures. A sensitivity analysis was conducted, and the results reveal that the reaction H2 + CH3O2 = H + CH3O2H has a very significant role in determining low-temperature ignition delay times (IDTs) of SMR mixtures. These findings provide valuable insights into the chemical kinetics governing methane reformate combustion and contribute to the optimization of onboard reformer designs aimed at mitigating methane slip in natural gas-fueled engines.

Fraze, Matthew↗

NASA NTRS2011

NASA Tech Briefs, November 2011

The topics include: 1) Flight Test Results from the Rake Airflow Gage Experiment on the F-15B; 2) Telemetry and Science Data Software System; 3) CropEx Web-Based Agricultural Monitoring and Decision Support; 4) High-Performance Data Analysis Tools for Sun-Earth Connection Missions; 5) Experiment in Onboard Synthetic Aperture Radar Data Processing; 6) Microfabrication of a High-Throughput Nanochannel Delivery/Filtration System; 7) Improved Design and Fabrication of Hydrated-Salt Pills; 8) Monolithic Flexure Pre-Stressed Ultrasonic Horns; 9) Cryogenic Quenching Process for Electronic Part Screening; 10) Broadband Via-Less Microwave Crossover Using Microstrip-CPW Transitions; 11) Wheel-Based Ice Sensors for Road Vehicles; 12) G-DYN Multibody Dynamics Engine; 13) Multibody Simulation Software Testbed for Small-Body Exploration and Sampling; 14) Propulsive Reaction Control System Model; 15) Licklider Transmission Protocol Implementation; 16) Core Recursive Hierarchical Image Segmentation; 17) Two-Stage Centrifugal Fan; 18) Combined Structural and Trajectory Control of Variable-Geometry Planetary Entry Systems; 19) Pressure Regulator With Internal Ejector Circulation Pump, Flow and Pressure Measurement Porting, and Fuel Cell System Integration Options; 20) Temperature-Sensitive Coating Sensor Based on Hematite; 21) Standardization of a Volumetric Displacement Measurement for Two-Body Abrasion Scratch Test Data Analysis; 22) Detection of Carbon Monoxide Using Polymer-Carbon Composite Films; 23) Substituted Quaternary Ammonium Salts Improve Low-Temperature Performance of Double-Layer Capacitors; 24) Sustainably Sourced, Thermally Resistant, Radiation Hard Biopolymer; 25) Integrated Lens Antennas for Multi-Pixel Receivers; 26) 180-GHz Interferometric Imager; 27) Maturation of Structural Health Management Systems for Solid Rocket Motors; 28) Validating Phasing and Geometry of Large Focal Plane Arrays; 29) Transverse Pupil Shifts for Adaptive Optics Non-Common Path Calibration; 30) Qualification of Fiber Optic Cables for Martian Extreme Temperature Environments; 31) Solid-State Spectral Light Source System; 32) Multiple-Event, Single-Photon Counting Imaging Sensor; 33) Surface Modeling to Support Small-Body Spacecraft Exploration and Proximity Operations; and 34) Achieving Exact and Constant Turnaround Ratio in a DDS-Based Coherent Transponder.

Source record↗

DOE OSTI2021

Editorial: Bioconversion and Biorefinery of C1 Compounds

The past decade has seen significant progress in the field of metabolic engineering and synthetic biology. The exponentially growing multi-omics data and technological advances in the development of efficient genetic manipulation tools and techniques have allowed scientists to explore and expand their understanding of microbial metabolisms and further develop sophisticated engineering strategies to realize the use of industrial "workhorses" and non-conventional microorganisms for sustainable bioconversion and biorefinery. There is of great interest for the research community in using C1 compounds (i.e., CO 2 , CO/syngas, methane, methanol) as the next generation feedstocks for microbial cell factories and biocatalysts to promote the sustainable development of a green economy (Figure 1). Considering lowering input costs is also a main consideration for successful business ventures, the use of inexpensive, abundant, and widely accessible C1 compounds is envisioned as a promising route for the sustainable production of fine chemicals, fuels, and other high-value products. Many C1 compounds are waste gases from industrial activities and may have detrimental effects on climate change upon emission into the atmosphere. Therefore, promoting the use of C1 compounds as renewable carbon feedstocks can greatly contribute to the reduction of anthropogenic emission of air pollutants.

09 BIOMASS FUELS↗

DOE OSTI2024

The Overlooked Potential of Sulfated Zirconia: Reexamining Solid Superacidity Toward the Controlled Depolymerization of Polyolefins

Closed-loop recycling via an efficient chemical process can help alleviate the global plastic waste crisis. However, conventional depolymerization methods for polyolefins, which compose more than 50% of plastics, demand high temperatures and pressures, employ precious noble metals, and yield complex mixtures of products limited to single-use fuels or oils. Superacidic sulfated zirconia (SZrO) with Hammet Acidity Functions (H 0 ) = -12 (i.e., stronger than 100% H 2 SO 4 ) is an industrially deployed heterogeneous catalyst capable of activating hydrocarbons under mild conditions and is shown to decompose polyolefins at ambient pressure and temperatures near 200 °C. Additionally, confinement of active sites in porous supports is known to radically increase selectivity, coking and sintering resistance, and acid site activity, presenting a possible approach to low-energy polyolefin depolymerization. However, a critical examination of the literature on SZrO led us to a surprising conclusion: despite 40 years of catalytic study, engineering, and industrial use, the surface chemistry of SZrO is poorly understood. Ostensibly spurred by SZrO's impressive catalytic activity, the application-driven study of SZrO has resulted in deleterious ambiguity in requisite synthetic conditions and insufficient characterization of acidity, porosity, and active site structure. Here, this ambiguity has produced significant knowledge gaps surrounding the synthesis, structure, and mechanisms of hydrocarbon activation for optimized SZrO, stunting the potential of this catalyst in olefin cracking and other industrially relevant reactions, such as isomerization, esterification, and alkylation. Toward mitigating these long extant issues, we herein identify and highlight these current shortcomings and knowledge gaps, propose explicit guidelines for characterization of and reporting on characterization of solid acidity, and discuss the potential of pore-confined superacids in the efficient and selective depolymerization of polyolefins.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗