Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Recrystallization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Long-Term 13 C Uptake by 12 C-Enriched Calcite

Knowledge of the exchange of carbon isotopes between dissolved inorganic carbon and calcite minerals is of long-standing importance for the interpretation of sedimentary paleoclimate records and 14 C transport in the geosphere. To assess the mechanism and rates of carbon isotope exchange, we equilibrated 12 C-pure synthetic calcite particles in water, first in a glovebox and then in contact with atmospheric P CO 2 and 13 C/ 12 C ratio, at two different temperatures. Cavity ring-down infrared spectroscopy δ 13 C measurements of the solid revealed sustained 13C incorporation for over a period of 500 days (21 °C) and 125 days (50 °C). We developed a quantitative model for recrystallization and isotope exchange, assuming that the interfacial free energy provides a thermodynamic driving force for the growth of larger particles at the expense of smaller ones. Furthermore, this Ostwald ripening model did not reproduce the kinetics of 13C uptake and required greater coarsening than observed. Rather, the data were best explained by a mechanism involving surface exchange and solid-phase diffusion of 13C into the particles with an inferred effective diffusion constant at 21 °C of about 10 –25 m 2 /s. Although this work cannot rule out the possibility that structural or chemical aspects of the synthetic particles enabled faster 13 C uptake than could be observed in natural systems, this study adds to the body of the recent work, suggesting that fast exchange processes are possible, likely through grain boundaries and other defects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Ligand Structural Isomerism in Formation of Calcium Coordination Networks

Using different structural isomers (2,5-; 2,4-; 2;6-; 3,4-; 3,5-) of pyridinedicarboxylic acid, nine calcium-based coordination networks were synthesized under hydro-/solvothermal conditions and/or were produced via solvent recrystallization of previously synthesized compounds. The coordination networks reported were characterized using single crystal X-ray diffraction and thermal methods. They show diverse structural topologies, depending on the ligand geometry and coordinated solvent molecules, with inorganic connectivity motifs ranging from isolated octahedra to infinite chains, layer and a three-dimensional dense framework. The as-synthesized and desolvated networks further show structural transformation to hydrated phases through dissolution/reformation pathways. The process is likely driven by the high hydration energy of the calcium metal center.

36 MATERIALS SCIENCE↗

Kinetics of Fe(II)-catalyzed transformation of 6-line ferrihydrite under anaerobic flow conditions

The readsorption of ferrous ions produced by the abiotic and microbially-mediated reductive dissolution of iron oxy-hydroxides drives a series of transformations of the host minerals. To further understand the mechanisms by which these transformations occur and their kinetics within a microporous flow environment, flow-through experiments were conducted in which capillary tubes packed with ferrihydrite-coated glass spheres were injected with inorganic Fe(II) solutions under circumneutral pH conditions at 25 C. Synchrotron X-ray diffraction was used to identify the secondary phase(s) formed and to provide data for quantitative kinetic analysis. At concentrations at and above 1.8 mM Fe(II) in the injection solution, magnetite was the only secondary phase formed (no intermediates were detected), with complete transformation following a nonlinear rate law requiring 28 hours and 150 hours of reaction at 18 and 1.8 mM Fe(II), respectively. However, when the injection solution consisted of 0.36 mM Fe(II), goethite was the predominant reaction product and formed much more slowly according to a linear rate law, while only minor magnetite was formed. When the rates are normalized based on the time to react half of the ferrihydrite on a reduced time plot, it is apparent that the 1.8 mM and 18 mM input Fe(II) experiments can be described by the same reaction mechanism, while the 0.36 input Fe(II) experiment is distinct. The analysis of the transformation kinetics suggest that the transformations involved an electron transfer reaction between the aqueous as well as sorbed Fe(II) and ferrihydrite acting as a semiconductor, rather than a simple dissolution and recrystallization mechanism. A transformation mechanism involving sorbed inner sphere Fe(II) alone is not supported, since the essentially equal coverage of sorption sites in the 18 mM and 1.8 mM Fe(II) injections cannot explain the difference in the transformation rates observed.

54 ENVIRONMENTAL SCIENCES↗

Effect of Aqueous Fe(II) on Arsenate Sorption on Goethite and Hematite

Biogeochemical iron cycling often generates systems where aqueous Fe(II) and solid Fe(III) oxides coexist. Reactions between these species result in iron oxide surface and phase transformations, iron isotope fractionation, and redox transformations of many contaminant species. Fe(II)-induced recrystallization of goethite and hematite has recently been shown to cause the repartitioning of Ni(II) at the mineral-water interface, with adsorbed Ni incorporating into the iron oxide structure and preincorporated Ni released back into aqueous solution. However, the effect of Fe(II) on the fate and speciation of redox inactive species incompatible with iron oxide structures is unclear. Arsenate sorption to hematite and goethite in the presence of aqueous Fe(II) was studied to determine whether Fe(II) causes substantial changes in the sorption mechanisms of such incompatible species. Sorption isotherms reveal that Fe(II) minimally alters macroscopic arsenate sorption behavior except at circumneutral pH in the presence of elevated concentrations (10{sup -3} M) of Fe(II) and at high arsenate loadings, where a clear signature of precipitation is observed. Powder X-ray diffraction demonstrates that the ferrous arsenate mineral symplesite precipitates under such conditions. Extended X-ray absorption fine structure spectroscopy shows that outside this precipitation regime arsenate surface complexation mechanisms are unaffected by Fe(II). In addition, arsenate was found to suppress Fe(II) sorption through competitive adsorption processes before the onset of symplesite precipitation. This study demonstrates that the sorption of species incompatible with iron oxide structure is not substantially affected by Fe(II) but that such species may potentially interfere with Fe(II)-iron oxide reactions via competitive adsorption.

54 ENVIRONMENTAL SCIENCES↗

Self-Assembly of Lyotropic Chromonic Liquid Crystal Sunset Yellow and Effects of Ionic Additives

Lyotropic chromonic liquid crystals (LCLCs) are formed by molecules with ionic groups at the periphery that associate into stacks through noncovalent self-assembly while in water. The very existence of the nematic (N) phase in the typical LCLC, the dye Sunset Yellow (SSY) is a puzzle, as the correlation length associated with the stacking, as measured in the X-ray experiments, is too short to explain the orientational order by the Onsager model. We propose that the aggregates can be more complex than simple rods and contain 'stacking faults' such as junctions with a shift of neighboring molecules, 3-fold junctions, etc. We study how ionic additives, such as salts of different valency and pH-altering agents, alter the N phase of SSY purified by recrystallization. The additives induce two general trends: (a) stabilization of the N phase, caused by the mono and divalent salts (such as NaCl), and evidenced by the increase of the N-to-I transition temperature and the correlation length; (b) suppression of the N phase manifested in the decrease of the N-to-I transition temperature and in separation of the N phase into a more densely packed N phase or the columnar (C) phase, coexisting with a less condensed I phase. The scenario (b) can be triggered by simply increasing pH (adding NaOH). The effects produced by tetravalent spermine fall mostly into the category (b), but the detail depends on whether this additive is in its salt form or a free base form. The base form causes changes through changes in pH and possible excluded volume effects whereas the salt form might disrupt the structure of SSY aggregates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Facile Approach to PbS Nanoflowers and Their Shape-Tunable Hollow Nanostructures: Morphology Evolution

In this work, we presented a facile approach for the preparation of three-dimensional PbS nanoflowers, which was attributed to the coexistence of two types of amines with different-length alkyl chains and different steric hindrance. These monodisperse PbS nanoflowers showed small particle sizes (35 nm) and narrow size distribution (dz9%). On the basis of these nanoflowers, we obtained a series of singlecrystal hollow PbS nanostructures with tunable morphologies (including sphere, cuboctahedron, cube, and tube/rod) through elevating reaction temperature and prolonging growth time. It was further followed by a detailed discussion of the mechanism of morphology evolution, where the recrystallization and intraparticle ripening made contributions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Picosecond laser structuration under high pressures: Observation of boron nitride nanorods

We report on picosecond UV-laser processing of hexagonal boron nitride (BN) at moderately high pressures above 500 bar. The main effect is specific to the ambient gas and laser pulse duration in the ablation regime: when samples are irradiated by 5 or 0.45 ps laser pulses in nitrogen gas environment, multiple nucleation of a new crystalline product-BN nanorods-takes place. This process is triggered on structural defects, which number density strongly decreases upon recrystallization. Nonlinear photon absorption by adsorbed nitrogen molecules is suggested to mediate the nucleation growth. High pressure is responsible for the confinement and strong backscattering of ablation products. A strong surface structuring also appears at longer 150 ps laser irradiation in similar experimental conditions. However, the transformed product in this case is amorphous strongly contaminated by boron suboxides B{sub x}O{sub y}.

36 MATERIALS SCIENCE↗

Microstructure of Cs-implanted zirconia: Role of temperature

The aim of this study was to identify experimentally the phase which includes cesium in yttria stabilized zirconia (YSZ). The solubility and retention of cesium in YSZ were studied at high temperature (HT). Cesium was ion implanted (at 300 keV) into YSZ at room temperature (RT), 750 deg. C, or 900 deg. C at fluences up to 5x10{sup 16} cm{sup -2}. The temperature dependence of the radiation-induced damage and of the cesium distribution in YSZ single crystals was investigated by Rutherford backscattering spectrometry and ion channeling. Transmission electron microscopy (TEM) studies were performed in order to determine the damage nature and search for a predicted ternary phase of cesium zirconate. Whatever the implantation temperature, the thickness of the damaged layer increases inwards with ion fluence. At RT, amorphization occurs, caused by the high Cs concentration (7 at. %). In situ TEM during postannealing shows recrystallization of cubic zirconia after release of cesium. A high implantation temperature has a significant influence on the nature of radiation defects and on the retained Cs concentration. At HT, dislocation loops and voids are formed but no amorphization is observed whereas polygonization occurs at high fluence. The implanted cesium concentration reaches a saturation value of 1.5 at. % above which Cs can no longer be retained in the matrix and is then released at the surface. At that concentration, cesium forms a solid solution in YSZ; no other phase is formed, neither during irradiation nor after thermal annealing.

36 MATERIALS SCIENCE↗

Role of spall in microstructure evolution during laser-shock-driven rapid undercooling and resolidification

We previously reported [Colvin et al., J. Appl. Phys. 101, 084906 (2007)] on the microstructure morphology of pure Bi metal subjected to rapid laser-shock-driven melting and subsequent resolidification upon release of pressure, where the estimated effective undercooling rates were of the order of 10{sup 9}-10{sup 10} K/s. More recently, we repeated these experiments, but with a Bi/Zn alloy (Zn atomic fraction of 2%-4%) instead of elemental Bi and with a change in target design to suppress spall in the Bi/Zn samples. We observed a similar microstructure morphology in the two sets of experiments, with initially columnar grains recrystallizing to larger equiaxed grains. The Bi samples, however, exhibited micron-scale dendrites on the spall surfaces, whereas there were no dendritic structures anywhere in the nonspalled Bi/Zn, even down to the nanometer scale as observed by transmission electron microscopy. We present the simulations and the interferometry data that show that the samples in the two sets of experiments followed nearly identical hydrodynamic and thermodynamic paths apart from the presence of (probably partially liquid) spall in pure Bi. Simulations also show that the spall occurs right at the moving phase front and, hence, the spall itself cuts off the principal direction for latent heat dissipation across the phase boundary. We suggest that it is the liquid spall itself that creates the conditions for dendrite formation.

36 MATERIALS SCIENCE↗

Impact of fluence-rate related effects on the sputtering of silicon at elevated target temperatures

In this work we show how ion-beam-induced epitaxial recrystallization plays a role in focused ion-beam (FIB) sputtering of silicon at elevated temperatures. The sputtering process is the key to all high-precision machining of microstructures and nanostructures by FIBs. A fluence-rate effect observed for the sputtering of silicon at elevated temperatures arises from competition between stabilizing interactions between populations of defects produced by consecutive ion impingement (damage buildup) and dynamic self-annealing. By high-resolution transmission electron microscopy analysis we show that the damage, produced by exposure of silicon to a 50 kV focused gallium (Ga) ion beam at elevated target temperatures, departs quite substantially from the expected damage based on the distribution of energy within the substrate due to nuclear stopping. An amorphous layer observed at room temperature is completely absent at higher temperatures. In contrast to FIB exposure at room temperature the implanted layers contain only point defects complexes and dislocations, thus suggesting that defect annealing takes place but it is incomplete. Correlating FIB sputtering experiments and high-resolution transmission electron microscopy, we discuss the lower sputtering yield at elevated target temperatures as the result of a higher surface binding energy of crystalline Si in comparison to amorphous silicon.

36 MATERIALS SCIENCE↗

Modeling two-dimensional solid-phase epitaxial regrowth using level set methods

Modeling the two-dimensional (2D) solid-phase epitaxial regrowth (SPER) of amorphized Si (variously referred to as solid-phase epitaxial growth, solid-phase epitaxy, solid-phase epitaxial crystallization, and solid-phase epitaxial recrystallization) has become important in light of recent studies which have indicated that relative differences in the velocities of regrowth fronts with different crystallographic orientations can lead to the formation of device degrading mask edge defects. Here, a 2D SPER model that uses level set techniques as implemented in the Florida object oriented process simulator to propagate regrowth fronts with variable crystallographic orientation (patterned material) is presented. Apart from the inherent orientation dependence of the SPER velocity, it is established that regrowth interface curvature significantly affects the regrowth velocity. Specifically, by modeling the local SPER velocity as being linearly dependent on the local regrowth interface curvature, data acquired from transmission electron microscopy experiments matches reasonably well with simulations, thus providing a stable model for simulating 2D regrowth and mask edge defect formation in Si.

36 MATERIALS SCIENCE↗

Thermal evolution of microstructure in ion-irradiated GaN

The thermal evolution of the microstructure created by irradiation of a GaN single crystal with 2 MeV Au2+ ions at 150 K is characterized following annealing at 973 K using transmission electron microscopy. In the as-irradiated sample characterized at 300 K, Ga nanocrystals with the diamond structure, which is an unstable configuration for Ga, are directly observed together with nitrogen bubbles in the irradiation-induced amorphous layer. Upon thermal annealing, the thickness of the amorphous layer decreases by ~13.1 %, and nano-beam electron diffraction analysis indicates no evidence for residual Ga nanocrystals, but instead reveals a mixture of hexagonal and cubic GaN phases in the annealed sample. Nitrogen molecules, captured in the as-irradiated bubbles, appear to debond and react with the Ga nanocrystals during the thermal annealing to form crystalline GaN. In addition, electron energy loss spectroscopy measurements reveal an atomic volume change of 18.9 % for the as-irradiated amorphous layer relative to the virgin single crystal GaN. This relative swelling of the damaged layer reduces to 7.7 % after thermal annealing. Partial recrystallization and structural relaxation of the GaN amorphous state are believed responsible for the volume change.

36 MATERIALS SCIENCE↗

Enhancement in electron field emission in ultrananocrystalline and microcrystalline diamond films upon 100 MeV silver ion irradiation

Enhanced electron field emission (EFE) behavior was observed in ultrananocrystalline diamond (UNCD) and microcrystalline diamond (MCD) films upon irradiation with 100 MeV Ag{sup 9+}-ions in a fluence of 5x10{sup 11} ions/cm{sup 2}. Transmission electron microscopy indicated that while the overall crystallinity of these films remained essentially unaffected, the local microstructure of the materials was tremendously altered due to heavy ion irradiation, which implied that the melting and recrystallization process have occurred along the trajectory of the heavy ions. Such a process induced the formation of interconnected nanocluster networks, facilitating the electron conduction and enhancing the EFE properties for the materials. The enhancement in the EFE is more prominent for MCD films than that for UNCD films, reaching a low turn-on field of E{sub 0}=3.2 V/mum and large EFE current density of J{sub e}=3.04 mA/cm{sup 2} for 5x10{sup 11} ions/cm{sup 2} heavy ion irradiated samples.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructure and texture developments in multiple pulses excimer laser crystallization of GaAs thin films

In this paper, we observed and characterized changes in the microstructure and texture during recrystallization and grain growth in polycrystalline GaAs thin films using multiple pulses crystallization by a KrF excimer laser. Films of various thicknesses were studied to assess film thickness and laser energy density effects. In the low temperature domain corresponding to the partial melting regime, normal grain growth was observed. In the superlateral grain growth regime the increase in grain size was notable with grain sizes much greater than the film thickness. A bimodal grain size distribution emerged implying the onset of secondary grain growth. The change in grain size distribution, texture, and grain boundary texture were analyzed using scanning electron microscopy and electron backscatter diffraction. It was found that grain growth is accompanied by a strengthening in (001) texture, indicating that the grain growth phenomenon is strain energy driven. The experimental results are explained with theory of secondary grain growth in thin films.

36 MATERIALS SCIENCE↗

Segregation and formation of MnP particles during rapid thermal annealing of Mn-implanted InP and GaP

We have studied the structural and magnetic properties of Mn implanted (1-5x10{sup 16} cm{sup -2}, 200 keV) into InP and GaP substrates, before and after rapid thermal annealing. As revealed by Rutherford backscattering spectrometry, secondary ion mass spectrometry, and transmission electron microscopy measurements, implantation results in an amorphous surface layer 300 nm deep, and subsequent annealing gives rise to epitaxial recrystallization of this layer accompanied by a segregation of most of the Mn into clusters about 60 nm in diameter at the surface. Magnetic measurements indicate ferromagnetic behavior only for the annealed samples with T{sub C} close to 290 K, characteristic of bulk MnP, whose presence is confirmed by diffraction data. In addition, there is no evident dependence of the magnetic and structural properties on the doping type or level of the substrates.

36 MATERIALS SCIENCE↗

Conduction mechanism of sputtered BaTiO{sub 3} film on Ni substrate

BaTiO{sub 3} (BTO) thin film capacitors were deposited on Ni substrate using rf magnetron sputtering. Microstructural studies by x-ray diffraction and transmission electron microscopy reveal that the as-grown BTO films have the columnar structure and the good interface structure. Postdeposition anneal results in the recrystallization of BTO films. The electrical measurements exhibit that the BTO films have high capacitance densities and low leakage currents.

36 MATERIALS SCIENCE↗

Combined electron backscatter diffraction and cathodoluminescence measurements on CuInS{sub 2}/Mo/glass stacks and CuInS{sub 2} thin-film solar cells

Electron backscatter diffraction (EBSD) and cathodoluminescence (CL) measurements in a scanning electron microscope were performed on cross sections of CuInS{sub 2} thin films and ZnO/CdS/CuInS{sub 2}/Mo/glass thin-film solar cells. The CuInS{sub 2} layers analyzed for the present study were grown by a rapid thermal process. The regions of the CuInS{sub 2} layers emitting high CL intensity of band-band luminescence are situated near the top surface (or close to the interface with ZnO/CdS). This can be attributed to an enhanced crystal quality of the thin films in this region. The phenomenon may be related to the recrystallization via solid-state reactions with Cu{sub x}S phases, which is assumed to run from the top to the bottom of the growing CuInS{sub 2} layer. The distribution of CL intensities is independent of the sample temperature, the acceleration voltage of the electron beam, and of whether or not the ZnO/CdS window layers are present. When comparing CL images and EBSD maps on identical sample positions, pronounced intragrain CL contrast is found for individual grains. Also, it is shown that at random grain boundaries, the decreases in CL intensities are substantially larger than at {Sigma}3 grain boundaries.

36 MATERIALS SCIENCE↗