Engineering Papers⌕ Search

DOE OSTI · 21190061

Modeling two-dimensional solid-phase epitaxial regrowth using level set methods

Abstract

Modeling the two-dimensional (2D) solid-phase epitaxial regrowth (SPER) of amorphized Si (variously referred to as solid-phase epitaxial growth, solid-phase epitaxy, solid-phase epitaxial crystallization, and solid-phase epitaxial recrystallization) has become important in light of recent studies which have indicated that relative differences in the velocities of regrowth fronts with different crystallographic orientations can lead to the formation of device degrading mask edge defects. Here, a 2D SPER model that uses level set techniques as implemented in the Florida object oriented process simulator to propagate regrowth fronts with variable crystallographic orientation (patterned material) is presented. Apart from the inherent orientation dependence of the SPER velocity, it is established that regrowth interface curvature significantly affects the regrowth velocity. Specifically, by modeling the local SPER velocity as being linearly dependent on the local regrowth interface curvature, data acquired from transmission electron microscopy experiments matches reasonably well with simulations, thus providing a stable model for simulating 2D regrowth and mask edge defect formation in Si.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Morarka, S, Law, M E, Rudawski, N G, Jones, K S, Elliman, R G. 2009-03-01. Modeling two-dimensional solid-phase epitaxial regrowth using level set methods. https://doi.org/10.1063/1.3082086

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Cyclic moisture reactivation of calcium sorbents for long duration thermochemical energy storage

The transition to a flexible and reliable energy infrastructure, using electro-thermal energy generation technologies such as geothermal, concentrated solar power, and nuclear, usually demands simultaneous advancement of thermal energy storage (TES) to support on-demand electricity generation and industrial applications while mitigating the inherent intermittency of renewable energy sources and power outages from direct energy generation. Among TES technologies, thermochemical energy storage (TCES) based on calcium looping emerges as a compelling high-power energy storage candidate due to its high reaction enthalpy, compatibility with elevated operating temperatures, and abundance of low-cost materials. However, the long-term durability of calcium-based sorbents for TCES is hindered by surface sintering and particle aggregation, leading to performance degradation over repeated thermal cycles. This study explores a moisture hydration-based strategy to regenerate a degraded calcium sorbent and mitigate performance degradation for long duration TCES. The addition of moisture transforms calcium oxide into calcium hydroxide and produces intercalation water layers, associated with a regenerated surface area and reduced calcium oxide crystallite size. Both these effects are beneficial in restoring the sorbents' reactivity for carbonization. Additionally, an optimized hydration-assisted reactivation protocol balances the recovered energy storage capacity with heating penalty required for moisture removal from hydrated samples, resulting in an enhanced energy storage capacity up to 176% compared to benchmark sorbents that undergo cycling without reactivation after 60 cycles. In conclusion, these results highlight the potential of hydration-assisted reactivation to enhance the long-term performance of TCES, providing an effective pathway to advancing electro-thermal storage technologies.

36 MATERIALS SCIENCE↗