SEARCH · Engineering Papers
Results for “ELECTRONICS”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
X-ray and electron spectroscopy of (photo)electrocatalysts: Understanding activity through electronic structure and adsorbate coverage
Electronic structure plays a critical role in the kinetics of (photo)electrocatalytic reactions. X-ray and electron spectroscopies provide key determinants—electronic structure, surface adsorbate speciation and coverage quantification, valence state, coordination chemistry, etc.—of catalytic activity and selectivity. Here, we provide an introduction to the fundamental physical concepts, capabilities, and limitations of x-ray photoelectron spectroscopy, x-ray absorption spectroscopy, and electron energy-loss spectroscopy as well as provide discussions of (photo)electrocatalysis-relevant publications utilizing each of these techniques. Our objective is to provide those new to x-ray and electron spectroscopies with sufficient information to assess which techniques probe desired material parameters, while also providing experts in each of these spectroscopic fields a bridge to view the importance of these spectroscopies to (photo)electrocatalysis research.
SU-E-T-356: Accuracy of Eclipse Electron Macro Monte Carlo Dose Algorithm for Use in Bolus Electron Conformal Therapy
Purpose: To evaluate the accuracy of electron dose distribution calculated by the Varian Eclipse electron Monte Carlo (eMC) algorithm for use with recent commercially available bolus electron conformal therapy (ECT). Methods: eMC-calculated electron dose distributions for bolus ECT have been compared to those previously measured for cylindrical phantoms (retromolar trigone and nose), whose axial cross sections were based on the mid-PTV CT anatomy for each site. The phantoms consisted of SR4 muscle substitute, SR4 bone substitute, and air. The bolus ECT treatment plans were imported into the Eclipse treatment planning system and calculated using the maximum allowable histories (2×10{sup 9}), resulting in a statistical error of <0.2%. Smoothing was not used for these calculations. Differences between eMC-calculated and measured dose distributions were evaluated in terms of absolute dose difference as well as distance to agreement (DTA). Results: Results from the eMC for the retromolar trigone phantom showed 89% (41/46) of dose points within 3% dose difference or 3 mm DTA. There was an average dose difference of −0.12% with a standard deviation of 2.56%. Results for the nose phantom showed 95% (54/57) of dose points within 3% dose difference or 3 mm DTA. There was an average dose difference of 1.12% with a standard deviation of 3.03%. Dose calculation times for the retromolar trigone and nose treatment plans were 15 min and 22 min, respectively, using 16 processors (Intel Xeon E5-2690, 2.9 GHz) on a Varian Eclipse framework agent server (FAS). Results of this study were consistent with those previously reported for accuracy of the eMC electron dose algorithm and for the .decimal, Inc. pencil beam redefinition algorithm used to plan the bolus. Conclusion: These results show that the accuracy of the Eclipse eMC algorithm is suitable for clinical implementation of bolus ECT.
Electron and photon energy calibration with the ATLAS detector using LHC Run 1 data
This paper presents the electron and photon energy calibration achieved with the ATLAS detector using about 25 fb -1 of LHC proton–proton collision data taken at centre-of-mass energies of √s=7 and 8 TeV. The reconstruction of electron and photon energies is optimised using multivariate algorithms. The response of the calorimeter layers is equalised in data and simulation, and the longitudinal profile of the electromagnetic showers is exploited to estimate the passive material in front of the calorimeter and reoptimise the detector simulation. After all corrections, the Z resonance is used to set the absolute energy scale. For electrons from Z decays, the achieved calibration is typically accurate to 0.05 % in most of the detector acceptance, rising to 0.2 % in regions with large amounts of passive material. The remaining inaccuracy is less than 0.2–1 % for electrons with a transverse energy of 10 GeV, and is on average 0.3 % for photons. The detector resolution is determined with a relative inaccuracy of less than 10 % for electrons and photons up to 60 GeV transverse energy, rising to 40 % for transverse energies above 500 GeV.
Electron reconstruction and identification in the ATLAS experiment using the 2015 and 2016 LHC proton-proton collision data at s√ = 13 TeV
Explore the source record for details and available documents.
Performance of electron and photon triggers in ATLAS during LHC Run 2
Explore the source record for details and available documents.
Improved control of electron computer-generated holographic grating groove profiles using ion beam gas-assisted etching
In a transmission electron microscope, electrons are described by matter-waves with wavelengths five orders of magnitude smaller than optical electromagnetic waves. Analogous to optical holography, electron wavefronts can be shaped using nanoscale holographic gratings. Here we demonstrate a novel, scalable nanofabrication method for creating off-axis holographic gratings that demonstrate near ideal diffraction efficiencies for binary, sinusoidal, and blazed grating groove profiles. We show that this method can produce up to 50 µm diameter area gratings that diffract up to 68% of the transmitted electron wave into a desired diffraction order with less than 7% into any other order. Additionally, we find that the amount of inelastically scattered electrons from the material gratings remaining in the coherent diffraction orders from the gratings is negligible in the far field.
Revealing momentum-dependent electron–phonon and phonon–phonon coupling in complex materials with ultrafast electron diffuse scattering
Abstract Despite their fundamental role in determining many important properties of materials, detailed momentum-dependent information on the strength of electron–phonon and phonon–phonon coupling across the entire Brillouin zone has remained elusive. Ultrafast electron diffuse scattering (UEDS) is a recently developed technique that is making a significant contribution to these questions. Here, we describe both the UEDS methodology and the information content of ultrafast, photoinduced changes in phonon-diffuse scattering from single-crystal materials. We present results obtained from Ni, WSe 2 , and TiSe 2 , materials that are characterized by a complex interplay between electronic (charge, spin) and lattice degrees of freedom. We demonstrate the power of this technique by unraveling carrier–phonon and phonon–phonon interactions in both momentum and time and following nonequilibrium phonon dynamics in detail on ultrafast time scales. By combining ab initio calculations with ultrafast diffuse electron scattering, insights into electronic and magnetic dynamics that impact UEDS indirectly can also be obtained. Graphic Abstract
Demonstration of Electron Cooling using a Pulsed Beam from an Electrostatic Electron Cooler
Electron cooling continues to be an invaluable technique to reduce and maintain the emittance in hadron storage rings in cases where stochastic cooling is inefficient and radiative cooling is negligible. Extending the energy range of electron coolers beyond what is feasible with the conventional, electrostatic approach necessitates the use of RF fields for acceleration and, thus, a bunched electron beam. To experimentally investigate how the relative time structure of the two beams affects the cooling properties, we have set up a pulsed-beam cooling device by adding a synchronized pulsing circuit to the conventional electron source of the CSRm cooler at Institute of Modern Physics *. We show the effect of the electron bunch length and longitudinal ion focusing strength on the temporal evolution of the longitudinal and transverse ion beam profile and demonstrate the detrimental effect of timing jitter as predicted by theory and simulations. Compared to actual RF-based coolers, the simplicity and flexibility of our setup will facilitate further investigations of specific aspects of bunched cooling such as synchro-betatron coupling and phase dithering.
High Pressure Electron Gun for Electron Beam Welding and Additive Manufacturing
Electron beam welding is a premier technology for high quality welding. However, e-beam welding is viewed as very expensive method for quality results. Therefore, it is often the last choice for joining metals. U.S. Electron is developing a technology that changes the welding environment. As a result of this pursuit of technology, e-beam welding can be field deployable. U.S. Electron has received a DOE SBIR Phase I grant to demonstrate a proof of principle that the plasma cathode can be installed in an electron gun housing, generate a current and energy enough to weld stainless steel. Under this CRADA, Fermilab proposed to provide a power supply, the necessary safety expertise and the physical location for testing of the initial prototype equipment developed by U.S. Electron.
Current Status of Developing Ultrafast Mega-electron-volt Electron Microsope
Recent studies of ultrafast electron microscopy (UEM) techniques show the use of short bunches of relativistic electrons is promising for the development of a new instrument for imaging various materials. Compared to conventional electron microscopes, the main advantage of UEMs with the electron energy of a few MeV is the possibility to study thick samples. We will discuss the progress of UEM design to date, the principal challenges on the way to a high resolution, and possible methods for their mitigation including the design of low-aberration magnetic optics, RF and mechanical subsystems with high stability, and precise collimation of electrons scattered in the samples.
Demonstration of Electron Cooling using a Pulsed Beam from an Electrostatic Electron Cooler
Electron cooling continues to be an invaluable technique to reduce and maintain the emittance in hadron storage rings in cases where stochastic cooling is inefficient and radiative cooling is negligible. Extending the energy range of electron coolers beyond what is feasible with the conventional, electrostatic approach necessitates the use of RF fields for acceleration and, thus, a bunched electron beam. To experimentally investigate how the relative time structure of the two beams affects the cooling properties, we have set up a pulsed-beam cooling device by adding a synchronized pulsing circuit to the conventional electron source of the CSRm cooler at Institute of Modern Physics *. We show the effect of the electron bunch length and longitudinal ion focusing strength on the temporal evolution of the longitudinal and transverse ion beam profile and demonstrate the detrimental effect of timing jitter as predicted by theory and simulations. Compared to actual RF-based coolers, the simplicity and flexibility of our setup will facilitate further investigations of specific aspects of bunched cooling such as synchro-betatron coupling and phase dithering.
On the Short-scale Spatial Variability of Electron Inflows in Electron-only Magnetic Reconnection in the Turbulent Magnetosheath Observed by MMS
We investigate the detailed properties of electron inflow in an electron-only reconnection event observed by the four Magnetospheric Multiscale (MMS) spacecraft in the Earth's turbulent magnetosheath downstream of the quasi-parallel bow shock. The lack of ion coupling was attributed to the small-scale sizes of the current sheets, and the observed bidirectional super-Alfvénic electron jets indicate that the MMS spacecraft crossed the reconnecting current sheet on both sides of an active X-line. Remarkably, the MMS spacecraft observed the presence of large asymmetries in the two electron inflows, with the inflows (normal to the current sheet) on the two sides of the reconnecting current layer differing by as much as a factor of four. Furthermore, even though the four MMS spacecraft were separated by less than seven electron skin depths, the degree of inflow asymmetry was significantly different at the different spacecraft. The asymmetry in the inflow speeds was larger with increasing distances downstream from the reconnection site, and the asymmetry was opposite on the two sides of the X-line. We compare the MMS observations with a 2D kinetic particle-in-cell (PIC) simulation and find that the asymmetry in the inflow speeds stems from in-plane currents generated via the combination of reconnection-mediated inflows and parallel flows along the magnetic separatrices in the presence of a large guide field.
Space Charge Compensation Using Electron Columns and Electron Lenses at IOTA
The ability to transport a high current proton beam in a ring is ultimately limited by space charge effects. Two novel ways to overcome this limit in a proton ring are by adding low energy, externally matched electron beams (electron lens, e-lens), and by taking advantage of residual gas ionization induced neutralization to create an electron column (e-column). Theory predicts that an appropriately confined electrons can completely compensate the space charge through neutralization, both transversely and longitudinally. In this report, we will discuss the current status of the Fermilab’s e-lens experiment for the space charge compensation. In addition, we will show how the IOTA e-column compensates space charge with theWARP simulations. The dynamics of proton beams inside of the e-column is understood by changing the magnetic field of a solenoid, the voltage on the electrodes, and the vacuum pressure, and by looking for electron accumulation, as well as by considering various beam dynamics in the IOTA ring.
Magnetized Electron Source for JLEIC Electron Cooler
Bunched-beam electron cooling is a key feature of all proposed designs of the future electron-ion collider, and a requirement for achieving the specified collision luminosity. For the Jefferson Lab Electron Ion Collider (JLEIC), fast cooling of ion beams will be accomplished via so-called 'magnetized cooling' implemented using a recirculator ring that employs an energy recovery linac. In this contribution, we describe the production of magnetized electron beam using a compact 300 kV DC high voltage photogun with an inverted insulator geometry and alkali-antimonide photocathodes. Beam magnetization was assessed using a modest diagnostic beamline that includes YAG view screens for measuring the rotation angle of the electron beamlet passing through a narrow upstream slit. Magnetization characterization including drift emittance were measured for various gun bias voltages and laser spot sizes at the photocathode using 532 nm lasers with DC and RF time structure. With magnetized beam, photocathode lifetime at currents up to 28 mA CW was measured and high bunch charge up to 700 pC was demonstrated.
Single-Shot Diagnostics of Microbunched Electrons in Laser-Driven Plasma Accelerators and Free-Electron Lasers
aThe need for single-shot diagnostics of the periodic longitudinal density modulation of relativistic electrons at the resonant wavelength (microbunching) in a free-electron laser (FEL) or at broadband visible wavelengths as in a laser-driven plasma accelerator (LPA) has been reaffirmed. In the self-amplified spontaneous emission (SASE) FEL case, statistical fluctuations in the microbunching occur in the startup- from-noise process. In the LPA, the plasma itself is chaotic and varies shot to shot. Fortunately, we have shown that coherent optical transition radiation (COTR) techniques, can assess beam size, divergence, spectral evolution, and z-dependent gain (100,000) of microbunched electrons in a past SASE FEL experiment at 530 nm*. Recently, the application to LPAs has been demonstrated with single-shot near-field (NF) and far-field (FF) COTR imaging done at the exit of an LPA for the first time**. In this case few-micron beam sizes and extensive fringes due to su b-mrad divergences were measured based on point-spread-function effects and an analytical model for COTR interferometry (COTRI), respectively. A new COTR-based diagnostics application to pre-bunched electron beams formed by co-propagating a laser pulse and the electron pulse in a short undulator (modulator) is also described.
Tailoring the Electronic Structures and Spectral Properties of ZnO with Irradiation Defects Generated Under Intense Electronic Excitation: A Combined Experimental and DFT Approach
Here, the relationship between the composition of the internal defect states, spectral properties, and correlated electronic structures of wurtzite zinc oxide (ZnO) crystals under 645 MeV Xe 35+ irradiation is systematically investigated, employing experimental characterizations combined with first-principle calculations. Based on the ion irradiation-induced thermal expansion and relaxation processes, the high concentration of vacancy/interstitial defects produced from the transient disordered phase in molten track states trigger photoelectric changes, as follows: i) the generation of internal defect states effectively reduces the intrinsic bandgap (3.25 eV → 2.66 eV); ii) a large number of defective active sites inhibits the recombination between electron–hole pairs, causing dark conductance and photoconductance to increase with increasing damage levels until optimal fluence is achieved. Based on the density functional theory (DFT) with the GGA + U (GGA = generalized gradient approximation) method, the defective models associated with the different electronic structures, density of states, formation energy, and the nature of the chemical bonding are established. The narrowing of the bandgap observed experimentally and the enhancement of carrier concentration originating from the internal electron defect states are qualitatively verified, therefore laying the foundation for designing future nanoscale photoelectronic devices and microelectronics applications.
Filament Formation in TaO x Thin Films for Memristor Device Application: Modeling Electron Energy Loss Spectra and Electron Transport
Abstract Although understanding filament formation in oxide‐based memristive devices by theory has emerged, there are still fundamental unanswered questions. Importantly, for practical application of thin films the material in its amorphous state is to be considered, but mostly lacking so far, and details on sub‐stoichiometry are also scarce. To gain insight into the optical and electronic properties of sub‐stoichiometric amorphous tantalum oxide (TaO x ), the electron energy loss spectrum (EELS) of model systems is characterized theoretically and electron transport characteristics are analyzed in detail. Calculated blue‐shifts by increasing sub‐stoichiometry explained the measurements, potentially suggesting estimation of oxygen vacancy concentrations through EEL spectra. Electron transport results based on TaO x material models validated by EELS measurements show that oxygen vacancy filamentary paths are initiated at low bias upon increasing sub‐stoichiometry yet noting an interplay with the local amorphous structure. Contact resistances at interfaces of the TaO x switching layer and a tantalum scavenging layer or titanium nitride electrode are quantified, indicating the possibility for either oxygen vacancy‐ or metal cluster‐based conduction mechanisms at the interface. The computational work, combined with experimental characterization for validation, provides a basis for investigating effects of sub‐stoichiometry on filament formation in TaO x thin film memristive devices.