Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface complexation model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Plasma Wall Interaction with 3-D Plasma Boundaries

The interaction of the edge plasma and the material surfaces is one of the most critical challenges on the path to harness fusion power as new, fundamental energy source. This challenge typically combines the thrust to reach high density, low temperature (detached) plasmas in front of the divertor target plates as well as understanding the plasma material interaction (PMI) in particular in this regime. The combination of both research thrusts represents an extraordinarily challenging subject encompassing spatial scales spanning nanometers to meters in all states of matter and across a broad energy range. Modeling capabilities, which help to interpret data from nowadays experiments and enable extrapolation to future devices are urgently required. This is in particular true for toroidal magnetic confinement devices with three-dimensional (3D) plasma boundaries. Such plasma boundary geometries occur in tokamaks, when small amplitude magnetic perturbations are used to stabilize the unruly edge plasma or in stellarators, that are inherently 3D plasma confinement devices. In this project, the impact of 3D plasma boundaries on the plasma material interaction (PMI) was assessed. This work focused on plasma boundary conditions, in which high-density conditions at the material surfaces yield mitigation of the otherwise immense heat and particle loads that these materials would see. These so-called high recycling and eventually detached plasma regimes are of great interest for future reactor operation. In the project, key features that are unique to 3D boundaries were explored in comparison to canonically assumed axisymmetric plasma edge situations in tokamaks. In particular, the relevance of the 3D boundary situation in the extrapolation to the plasma boundary solution at ITER, the next step fusion energy experiment under construction as a multi-national, world-wide large-science experiment in southern France, has been explored. The EMC3-EIRENE plasma edge fluid and kinetic neutral transport code has been advanced to cope with the challenging and unprecedented conditions in the ITER boundary plasma including 3D fields that are planned to be used to suppress harmful edge instabilities, the so-called edge localized modes. This is a vital integration challenge for ITER and the results from this grant have provide a leading capability for this assessment. It was shown that the detachment process in a 3D edge solution for ITER follows the recycling regimes that are known from axisymmetric solutions, but that multiple plasma exhaust channels connected to the material surfaces are established which feature individual recycling characteristics. Because these channels touch the material surfaces in the divertor in a 3D geometry, the compatibility with the plasma material interaction (PMI), including erosion and impurity generation has been found to be an important part of the integration challenge. To address this, the fully 3D plasma material interaction code ERO2 has been adapted to these ITER specific geometries and a homogeneous mixing model was implemented, that allows to consider the mixing of Be and Was used at ITER in the PMI modeling. This model enhancement has been used to study non-local migration of Be in the JET ITER like wall configuration and it has been shown that with this model such complex migration processes in ITER relevant plasma shapes and with ITER relevant plasma boundary conditions can be addressed. The combined modeling approach using EMC3-EIRENE as a plasma boundary transport code and the ERO2 specialized PMI model will be an asset for the continued preparations of ITER operation as well as for Fusion Pilot Plant efforts that have emerged in the U.S. during the evolution of this grant. The predictive capability of this numerical tool has been validated at the DIII-D US national fusion facility. Here, dedicated plasma edge diagnostics were implemented to measure the impurity household around a 3D edge plasma during ELM suppression by 3D fields. Dedicated experiments with local material probes using these diagnostics and the state-of-the-art suite of boundary measurements at DIII-D have shown that the 3D perturbation of the plasma edge that is excreted by such 3D control fields yield a perturbation of the plasma boundary flux structure and hence also of the resulting PMI. The 3D boundary plasma is composed out of helical magnetic flux channels that intersect the divertor targets at an angle relative to the main guiding field, i.e., the toroidal magnetic field component of the tokamak. A similar effect has been measured as well on limiter surfaces during the startup campaign at the new stellarator experiment Wendelstein 7-X. These experiments ad initial analysis with the ERO plasma material interaction model, suggested that the place of erosion for a given particle from the surface and its re-deposition can be different in such 3D field geometries yielding potentially a significant level of net-erosion. This is not the case for axisymmetric solutions, where it was shown in the past that the eroded particles are effectively re-deposited into gaps produced by erosion at the same position and hence the net-erosion levels are small. For ITER, the quest to suppress the ELMs and at the same time maintain the integrity of the divertor is an issue, which these fundamental findings will help to resolve. The coupling of this work to the extrapolation in the ITER program has been addressed by both the PI and the lead numerical scientist being ITER Science Fellows in the duration of the contract and forward. A second focus in the exploration of 3D boundary effects on tokamaks and stellarators has been set on the measurement of helium exhaust features with such 3D fields. This is important because He represents the ash of the fusion process and needs to be exhausted. It was shown that 3D field application compatible with suppression of ELMs yields an increase of the helium exhaust performance. The ratio of the effective helium confinement time over the energy confinement time was reduced by almost 50% which demonstrated that the impact of helium accumulation in the plasma core with respect to the confinement of energy to sustain the fusion reaction is significantly improved with such 3D control fields. It was shown that this is the case for tokamaks as well as stellarators. At the Large helical Device in Japan, a similar enhancement of the helium exhaust features when small amplitude additional 3D fields were applied was measured. This is an important additional function of 3D field application and its impact on ITER is presently being studied in combination with investigations of helium exhaust in 3D field geometries of stellarator devices.

3D plasma edge transport↗
DOE OSTI2023

A Fully Explicit Integrator for Modeling Astrophysical Reactive Flows

Simulating complex astrophysical reacting flows is computationally expensive—reactions are stiff and typically require implicit integration methods. The reaction update is often the most expensive part of a simulation, which motivates the exploration of more economical methods. In this research note, we investigate how the explicit Runge–Kutta–Chebyshev (RKC) method performs compared to an implicit method when applied to astrophysical reactive flows. These integrators are applied to simulations of X-ray bursts arising from unstable thermonuclear burning of accreted fuel on the surface of neutron stars. We show that the RKC method performs with similar accuracy to our traditional implicit integrator, but is more computationally efficient when run on CPUs.

GPU computing↗
DOE OSTI2025

PFSA-Ionomer Adsorption to C and Pt/C Particles in Fuel-Cell Inks

Catalyst inks used to make fuel-cell electrodes consist of Pt/C catalyst particles and a perfluorosulfonic acid (PFSA) ionomer dispersed in water/alcohol solvent mixtures. PFSA ionomer in the ink adsorbs to the surface of the catalyst particles, dictating the dispersion colloid properties. Following adsorption, the subsequent distribution of excess nonadsorbed ionomer in the ink then governs the final structure of the electrode. Here, we characterize the adsorption of the PFSA ionomer onto Pt/C catalyst particles. PFSA adsorption is largely irreversible. Adsorbed sulfonic-acid moieties impart a negative charge on the catalyst surface, causing electrostatic repulsion between the free ionomer in solution and the ionomer-covered Pt/C particle surface. The amount of adsorption is limited by the resulting electrostatic charge that grows as more ionomer adsorbs, and the catalyst surface becomes more negatively charged. Attenuating electrostatic repulsion by increasing the ink ionic strength promotes ionomer adsorption. Electrostatically limited adsorption is observed, irrespective of the solvent water/n-propanol ratio or the catalyst particle porosity and Pt loading. Experimentally measured ionomer adsorption isotherms are well predicted by a Smoluchowski-based kinetic adsorption model, in which the electrostatic energy barrier for adsorption is predicted from DLVO theory. These findings help to unravel the complex phenomena within these colloidal dispersions, allowing for subsequent tailoring of inks to optimize fuel-cell electrode structure and performance.

Adsorption↗
DOE OSTI2021

Climate Signatures on Lake And Wetland Size Distributions in Arctic Deltas

Abstract Understanding how thermokarst lakes on arctic river deltas will respond to rapid warming is critical for projecting how carbon storage and fluxes will change in those vulnerable environments. Yet, this understanding is currently limited partly due to the complexity of disentangling significant interannual variability from the longer‐term surface water signatures on the landscape, using the short summertime window of optical spaceborne observations. Here, we rigorously separate perennial lakes from ephemeral wetlands on 12 arctic deltas and report distinct size distributions and climate trends for the two waterbodies. Namely, we find a lognormal distribution for lakes and a power‐law distribution for wetlands, consistent with a simple proportionate growth model and inundated topography, respectively. Furthermore, while no trend with temperature is found for wetlands, a statistically significant decreasing trend of mean lake size with warmer temperatures is found, attributed to colder deltas having deeper and thicker permafrost preserving larger lakes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Unusual high-field metal in a Kondo insulator

Strong electronic interactions in condensed-matter systems often lead to unusual quantum phases. One such phase occurs in the Kondo insulator YbB12, the insulating state of which exhibits phenomena that are characteristic of metals, such as magnetic quantum oscillations, a gapless fermionic contribution to heat capacity and itinerant-fermion thermal transport. To understand these phenomena, it is informative to study their evolution as the energy gap of the Kondo insulator state is closed by a large magnetic field. Here we show that clear quantum oscillations are observed in the resulting high-field metallic state in YbB12; this is despite it possessing relatively high resistivity, large effective masses and huge Kadowaki–Woods ratio, a combination that normally precludes quantum oscillations. Both quantum oscillation frequency and cyclotron mass display a strong field dependence. By tracking the Fermi surface area, we conclude that the same quasiparticle band gives rise to quantum oscillations in both insulating and metallic states. These data are understood most simply by using a two-fluid picture in which neutral quasiparticles—contributing little or nothing to charge transport—coexist with charged fermions. Overall, our observations of the complex field-dependent behaviour of the fermion ensemble inhabiting YbB 12 provide strong constraints for existing theoretical models.

36 MATERIALS SCIENCE↗
DOE OSTI2025

The Effect of Updraft Entrainment on Convective Cell Deepening in Realistic Large-Eddy Simulations

Entrainment of surrounding cooler and drier air into convective updrafts is one of the key processes that influence deep convection initiation and growth. Numerous studies have investigated the effect of entrainment on isolated convective cloud growth in idealized simulations, but the importance of this effect in realistic conditions with many interacting convective clouds remains uncertain. We examine the impact of entrainment on the depth reached by convective clouds in realistic large-eddy simulations (LES) over central Argentina during the Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign. Cloudy updrafts and their associated properties are assigned to convective cells tracked with radar reflectivity signatures. Several thousand convective cells are tracked over two high convective available potential energy (CAPE) and two low CAPE cases that support cells of varying depths and intensities. Entrainment is calculated explicitly as the fluxes of air into the outer surface of each cloudy updraft. Single-predictor logistic regression models are used to determine the relative importance of updraft, near-updraft, and preconvective initiation atmospheric conditions in predicting whether convective cells become deep. We then build a multiple-predictor regression model pairing important updraft and meteorological metrics with fractional entrainment rate. The probability of cells transitioning to deep convection is most sensitive to ambient 600-hPa relative humidity (42% of total metric contribution to cloud depth predictability), followed by low-level CAPE (28%), cloud-base updraft width (19%), and fractional entrainment (11%). Thus, the initial width of the updraft along with potential buoyancy and its dilution through the midtroposphere collectively determine whether deep convection will result from shallower clouds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Physical Sciences Vistas: Issue 4 2021

In this issue of Physical Sciences Vistas we highlight examples of “excellence in nuclear security.” In this issue, highlights of our outstanding work supporting the Laboratory’s nuclear security enterprise include the following: The complete refurbishment of Sigma’s surface finishing lab. Pride in the lab’s revitalized condition on the part of the operations and R&D staff responsible for this complex operation is well justified. Development of advanced materials and processes enabling next-generation weapons designs, much of which has been facilitated by projects supported by the Laboratory Directed Research and Development Program. The use of proton radiography in illuminating elements important to validating high explosive burn models. The experimental series was a collaboration between Los Alamos researchers and staff at Lawrence Livermore and Sandia national laboratories and the United Kingdom’s Atomic Weapons Establishment. Deployment of a sophisticated remote handling unit to safely transfer highly radioactive materials required to support mission-critical projects. The skillful swap of an electrical transformer at the Los Alamos Neutron Science Center (LANSCE). The deliberate operation restored power to the accelerator in less than estimated time. A look at George Goff ’s role in translating fundamental science into applied solutions essential to the Lab’s nuclear security mission.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Editorial: Sorption processes in nuclear waste management: data knowledge management and new methodologies for data acquisition/prediction

A fundamental approach to Nuclear Waste Repository research involves the collection of experimental data in a laboratory setting, development of empirical and/or mechanistic numerical models representing those observations, and application of these models (or Reduced Order Models) into reactive transport and performance assessment models as predictive tools for informing society of impacts and risks associated with nuclear waste repository scenarios (Stevens et al., 2020). Therefore, the assimilation and interpretation of experimental data must take advantage of both new data and the rich historical data available in the literature and apply novel modeling approaches to improve predictive tools, particularly from the standpoint of uncertainty quantification, for nuclear waste repository performance assessment (Zavarin et al., 2022).

sorption↗
DOE OSTI2026

Evaluation of a high-resolution regional climate simulation for surface and hub-height wind climatology over North America

Assessing the availability of key wind resources requires augmenting observations to support the implementation of wind energy infrastructure. However, observations are limited, necessitating the development of high-resolution, long-term gridded datasets. This study presents a robust, dynamically downscaled climatological dataset, offering 20 years of hourly wind data at a 4 km spatial resolution across North America, and evaluates its performance against observations, including meteorological towers and automated surface-observing system (ASOS) stations, as well as coarse-resolution reanalysis data (the European Centre for Medium-Range Weather Forecasts (ECMWF) reanalysis version 5 (ERA5)). Results demonstrate that the downscaled high-resolution wind data outperform ERA5 in regions of complex terrain and coastal areas, with improved overlap coefficients for wind data distributions and reduced root mean square errors (RMSEs) for hub-height and near-surface diurnal wind patterns. The downscaled simulation also captures the synoptic drivers of seasonal wind direction patterns reasonably well, indicated by high wind rose similarity indices. This study also provides an analysis of interannual variability, utilizing the dataset's full 20-year period, and model uncertainty, generated by varying model initial conditions and physics parameterizations across 1-year ensemble members, which are key considerations for wind resource assessment in wind farm development.

17 WIND ENERGY↗
DOE OSTI2020

A Survey of Multizone Airflow Simulation Software

H-Canyon simulates the building and process ventilation to ensure positive contamination control for any modifications as well as evaluating off-normal conditions. Simulations can also be used to identify air quality of personnel occupied areas. The models can be classified into two groups, single and multi-zone models. As the name states, a single zone model assumes that the building can be described by a single, well-mixed zone. Whereas large buildings have structures that must be described as multizone. Multizone airflow models deal with the difficulty of flows in a building by distinguishing the effects of internal flow restrictions. Several models have been developed that take internal partitions into account. CONTAM (currently used) is a multizone airflow program created by NIST to determine airflows including infiltration, exfiltration, wind pressures acting outside the building, buoyancy effects caused by the indoor and outdoor air temperature difference. COMIS is a multizone air infiltration, ventilation, and contaminant transport model that was developed at Lawrence Berkeley National Laboratory. COMIS deals with applied pressure distribution, airflow components, HVAC systems, schedules, and contaminant transport. EnergyPlus is designed by DOE. It supports flexible component level configuration of HVAC models and simulates sub-hourly time steps to control fast dynamic systems. The program features include providing accurate environmental performance data including energy consumption and carbon emissions, and reporting solar gains on surfaces. Heavent is used to model industrial ventilation systems to control airborne contaminants. It's designed based on the American Conference of Governmental Industrial Hygienists (ACGIH) Ventilation manual. DesignBuilder is the most recognized and advanced user interface to EnergyPlus. It gives access to all of the most frequently required simulation capabilities covering building fabric, thermal mass, glazing, shading renewables, and HVAC analysis. The objective of this study is to identify all relevant software available including commercially licensed, freely licensed, and open source, that can be used to simulate large, complex process facility ventilation systems. All discovered software tools are evaluated for salient features and compared to the software tool currently used to simulate the H-Canyon ventilation system. The design criteria of a ventilation system has two basic requirements: Supplying fresh air for the occupants and changing the air in the room sufficiently; therefore, the smells, fumes, and contaminants will be removed. In this study, first, whether the software simulates airflow (infiltration, natural ventilation, and interzonal) or considers them to be inputs is discussed. Second, if indoor contaminant levels are considered; and finally suggestions on how airflow analysis can be more appropriately accounted for when performing airflow simulation of a building. All of the airflow software reviewed for this study can account for constant infiltration and natural ventilation rates that are not affected by changes in indoor and outdoor conditions. Modelling infiltration in EnergyPlus or DesignBuilder are applicable for small buildings and not appropriate for larger buildings like the H-Canyon. The effect of wind on external pressures, infiltration, and natural and mechanical ventilation, can also be calculated using all of these software. These programs have control options to switch between natural to mechanical ventilation modes or both (hybrid). Interzonal airflow can be applied which means one zone can be specified to receive a fixed amount of air from another zone. The following ventilation modeling software is recommended for further testing: CONTAM, COMIS, Heavent. The next step in evaluating the software will consist of creating test facility simulations using evaluation copies of the software.

42 ENGINEERING↗
DOE OSTI2020

The impacts of horizontal resolution on the seasonally-dependent biases of the northeastern Pacific ITCZ in coupled climate models.

Double-ITCZ has puzzled climate model community for more than two decades. Here, we found that over the eastern Pacific, precipitation and sea surface temperature (SST) biases in the NCAR CESM1 are seasonally-dependent, with positive (negative) precipitation/SST biases during boreal summer/fall (winter/spring), although the easterly wind bias persists around the year. This seasonally-dependent bias of precipitation/SST is found to be caused by the failure of the model to reproduce the climatological seasonal wind reversal of North American monsoon. During winter/spring, the climatological easterly wind dominates, so the stronger wind speed in the model enhances the evaporation and lowers the SST. It is opposite when the climatological wind turns to westerly during summer/fall. The easterly wind bias also occurs in the atmospheric model when the observation SST is prescribed, suggesting it is of atmospheric origin. Further, the easterly wind bias is mainly evident in the lower troposphere and quite independent of time, implying the effect of complex and narrow-ranged Central American topography, which is not depicted well in the coarse model resolution. When the model resolution is doubled, both SST and precipitation are improved with the reduced easterly wind bias. During boreal spring, when ITCZ bias is most significant, the northern and southern ITCZ can be improved by 29% and 18.8% respectively in the higher resolution. Finally, we suggest that these seasonally-dependent biases over the eastern Pacific are quite universal among 37 CMIP5 coupled models, and the ongoing CMIP6 project will provide a valuable opportunity to examine whether the bias can be reduced by increasing model resolution.

Song, Fengfei↗
DOE OSTI2024

3D modeling of deep borehole electromagnetic measurements with energized casing source for fracture mapping at the Utah Frontier Observatory for Research in Geothermal Energy

Here, we present a 3D numerical modelling analysis evaluating the deployment of a borehole electromagnetic measurement tool to detect and image a stimulated zone at the Utah Frontier Observatory for Research in Geothermal Energy geothermal site. As the depth to the geothermal reservoir is several kilometres and the size of the stimulated zone is limited to several 100 m, surface-based controlled-source electromagnetic measurements lack the sensitivity for detecting changes in electrical resistivity caused by the stimulation. To overcome the limitation, the study evaluates the feasibility of using a three-component borehole magnetic receiver system at the Frontier Observatory for Research in Geothermal Energy site. To provide sufficient currents inside and around the enhanced geothermal reservoir, we use an injection well as an energized casing source. To efficiently simulate energizing the injection well in a realistic 3D resistivity model, we introduce a novel modelling workflow that leverages the strengths of both 3D cylindrical-mesh-based electromagnetic modelling code and 3D tetrahedral-mesh-based electromagnetic modelling code. The former is particularly well-suited for modelling hollow cylindrical objects like casings, whereas the latter excels at representing more complex 3D geological structures. In this workflow, our initial step involves computing current densities along a vertical steel-cased well using a 3D cylindrical electromagnetic modelling code. Subsequently, we distribute a series of equivalent current sources along the well's trajectory within a complex 3D resistivity model. We then discretize this model using a tetrahedral mesh and simulate the borehole electromagnetic responses excited by the casing source using a 3D finite-element electromagnetic code. This multi-step approach enables us to simulate 3D casing source electromagnetic responses within a complex 3D resistivity model, without the need for explicit discretization of the well using an excessive number of fine cells. We discuss the applicability and limitations of this proposed workflow within an electromagnetic modelling scenario where an energized well is deviated, such as at the Frontier Observatory for Research in Geothermal Energy site. Using the workflow, we demonstrate that the combined use of the energized casing source and the borehole electromagnetic receiver system offer measurable magnetic field amplitudes and sensitivity to the deep localized stimulated zone. The measurements can also distinguish between parallel-fracture anisotropic reservoirs and isotropic cases, providing valuable insights into the fracture system of the stimulated zone. Besides the magnetic field measurements, vertical electric field measurements in the open well sections are also highly sensitive to the stimulated zone and can be used as additional data for detecting and imaging the target. We can also acquire additional multiple-source data by grounding the surface electrode at various locations and repeating borehole electromagnetic measurements. This approach can increase the number of monitoring data by several factors, providing a more comprehensive dataset for analysing the deep-localized stimulated zone. The numerical analysis indicates that it is feasible to use the combination of the energized casing and downhole electromagnetic measurements in monitoring localized stimulated zone at large depths.

58 GEOSCIENCES↗
DOE OSTI2023

Joint Inversion of Surface Electrical Resistivity Tomography and Seismic Refraction Data between the 200 Areas

Geologic stratigraphy on the Hanford Site influences groundwater and contaminant migration through the aquifer system and the vadose zone. The current geologic framework model (GFM) relies heavily on a sparse distribution of borehole data in some locations to map geologic contacts and hydrologic properties in the subsurface. Non-invasive geophysical methods such as electrical resistivity tomography (ERT), transient electromagnetic surveying, and seismic imaging are being used at Hanford to map subsurface structure in areas with limited well observations. This is to develop and mature the capability of geophysical methods to aid in GFM refinement, to identify regions of subsurface complexity, and for optimal well siting. A joint inversion of co-located seismic refraction and ERT data was carried out for data collected on a ~2.3-km profile between the 200 Areas on the Hanford Site. While ERT and seismic refraction images have sensitivity to overlapping physical properties (porosity, moisture content, lithology), the resolution and physics used to acquire each of these datasets are different and therefore information can be different or mutually complementary. Performing a joint inversion provides a reasonable option for a coherent, coupled interpretation for mutually complementary datasets. Between the 200 Areas, there are few boreholes to interpret the geologic framework model, and these data sets were obtained to provide a first line of evidence toward identifying stratigraphic structure. The seismic refraction and ERT data were independently inverted during fiscal year 2022 and broadly showed a two-layer structure with a trough-like feature that is ~1 km wide and upwards of 150 m deep. The depth of the trough feature was greater in the ERT image compared to the seismic image, which indicated a maximum depth of approximately 110 m. The objective of the joint inversion described in this report was to invert the seismic refraction and ERT data together while constraining the ERT image to be structurally similar to the seismic refraction image. The approach was applied using the geophysical inverse modeling program E4D, which has the capability to invert first-arrival times from seismic refraction data and ERT resistances using a “cross-gradient” constraint. The application of cross-gradient constraints with different weights produces ERT models that show a high degree of similarity within the upper 100 m (above ~120 m elevation). None of the ERT models show an improved structural similarity to the seismic result; therefore, it is recommended that further attempts to jointly interpret these models focus on petrophysics and image resolution. Petrophysical measurements of core samples would improve knowledge of what drives the ERT response in this region and, along with downhole geophysical measurements, could be used to “ground truth” the surface-based geophysical results. Image resolution studies would provide insight into which regions of the inverted images are reliable and which regions are poorly constrained.

58 GEOSCIENCES↗
DOE OSTI2020

River Dynamics Control Transit Time Distributions and Biogeochemical Reactions in a Dam-Regulated River Corridor

Residence Time Distributions (RTDs) exert an important control on biogeochemical translation in the hydrological systems. Previous tracer studies have revealed that RTDs often followed time-invariant exponential, lognormal, or heavy-tailed RTDs that have power-law behavior for long tails in headwater or low-order streams. However, there is a recognition that RTDs can be more complicated and time-variable in response to dynamic hydrological forcing. Here, we use particle tracking to estimate RTDs along the Hanford Reach of the Columbia River and to quantify the influences of river stage fluctuations. Particle tracking is conducted using the velocity field from high-resolution 3D groundwater flow simulations. The effects of hydrological forcing on the residence time distribution were evaluated by varying river flow boundary conditions and releasing particles in different time windows. Our results revealed that dynamic stage fluctuations created rapidly changing losing-gaining conditions in the river and led to highly transient RTDs, which contributes to multiple modes of RTDs. Dam-induced high-frequency (sub-daily) flow variation contributes to the short-time (sub-daily) component of the RTDs. Deviation of the reactant consumption under the single-mode assumption compared to the multimodal RTDs is relatively small (~5%) and appears when the Damköhler number was close to one.More specifically, high-frequency (daily) dam-induced stage variations have higher impacts on biogeochemical reactions with faster reaction rate, and can potentially increase the reactant consumption by 26.68%. Based on these findings, we suggest that current river basin models could be improved by including bank storage and more complex RTDs influenced by both short and long term river stage fluctuations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Long‐term growth and persistence of granitic inselbergs in a semi‐arid cratonic landscape

Granitic inselbergs are enduring landforms that punctuate planation surfaces in tectonically stable settings, yet the mechanisms and timescales of their persistence remain debated. Here, in this study, we present a multinuclide cosmogenic dataset ( 10 Be, 26 Al and 21 Ne) from bedrock, fluvial sediments and planation surfaces in the semi-arid Central Ceará Domain, north-eastern Brazil, to quantify denudation rates and reconstruct the long-term dynamics of residual relief formation. This triple-nuclide approach enables independent validation of denudation contrasts and long-term exposure histories, providing quantitative constraints on inselberg evolution that a single-nuclide approach could not resolve. Bedrock denudation rates (1–4 m Myr −1 ) are systematically lower than basin-wide rates (8–14 m Myr −1 ), revealing a regional pattern of vertical differential denudation. When combined with summit elevations and surface exposure ages of up to 5 Myr, these contrasts suggest that cumulative relief growth has been operating over timescales of tens of millions of years (1–57 Myr). Morphological and structural observations further indicate localized mass wasting and heterogeneous erosion styles, modulated by rock fabric and joint density. Cosmogenic nuclide inventories in detrital sediments reveal partial reworking from older sediment stocks, including surface pebbles with exposure ages up to 5 Myr, which record multistage of burial and re-exposure histories and reflect episodic remobilization in low-connectivity, semi-arid catchments. Rather than static relicts of ancient surfaces, inselbergs in this cratonic setting emerge as dynamic landforms actively sustained by slow but persistent differential denudation. These results provide new constraints on long-term cratonic landscape evolution and underscore the interplay between lithological resistance, structural inheritance and sediment transfer processes in sustaining topographic relief. They also call for a critical reassessment of classical inselberg models, suggesting that hybrid mechanisms, rather than single-process paradigms, more accurately capture the complexity of residual landform development in cratonic interiors.

Cosmogenic nuclides↗
DOE OSTI2021

MCML: Combining physical constraints with experimental data for a multi-purpose meta-generalized gradient approximation

The predictive power of density functional theory for materials properties can be improved without increasing the overall computational complexity by extending the generalized gradient approximation (GGA) for electronic exchange and correlation to density functionals depending on the electronic kinetic energy density in addition to the charge density and its gradient, resulting in a meta-GGA. Here, we propose an empirical meta-GGA model that is based both on physical constraints and on experimental and quantum chemistry reference data. Overall, the resulting optimized meta-GGA MCML yields improved surface and gas phase reaction energetics without sacrificing the accuracy of bulk property predictions of existing meta-GGA approaches.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A Phase-Field Study on Internal to External Oxidation Transition in High-Temperature Structural Alloys

Structural alloys applied at high temperatures rely on an external dense layer of oxide scale for protection. As some reactive alloy components are selectively oxidized internally, understanding how these dispersed metal oxide particles reach the surface to form a protective scale—the so-called internal to external oxidation transition—is crucial for designing these alloys. While the literature is replete with experimental studies on oxidation of alloys, there is a lack of computational studies in this realm due to the complex nature of coupled reaction and diffusion processes in multicomponent multi-phase alloy systems. In this work, we apply a recently developed phase-field model to simulate the oxidation processes under different compositions and nucleation scenarios to gain insights into how a continuous oxide scale can be established. The results show that while alloy composition is critical for internal to external oxidation transition, the oxide nuclei size, shape and distribution also have significant impact on the transition kinetics.

36 MATERIALS SCIENCE↗
DOE OSTI2026

The presence of Ru metal modifies the behavior of deuterium bound to pyridinic nitrogen in doped graphene-like materials

We used a combination of x-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) to investigate how the presence of a ruthenium (Ru) metal substrate modifies the N-D bond strength of the pyridinic nitrogen species in nitrogen (N)-doped graphene (Gr) on Ru(0001) compared to metal-free highly-oriented pyrolytic graphite (HOPG) substrate. The N-dopants were introduced through low-energy N+/N2+ irradiation. N is embedded in the carbon materials in two predominant configurations: as graphitic N (GN: N substituted in the hexagonal C lattice) and pyridinic N (PN: substitutional N adjacent to a C vacancy). XPS data showed that upon atomic deuterium (D) exposure at 220 K, the PN peak shifted to a higher binding energy by +1.2 eV for HOPG and +1.0 eV for N-doped graphene on Ru(0001), while the GN peak remained unchanged, indicating that the D atoms bound solely to pyridinic N. 85% of PN sites on HOPG can be saturated with D atoms, whereas only ~30% of pyridinic N sites are able to bind D atoms in N-doped Gr/Ru(0001). Our DFT analysis shows that this difference is due to the coordination of PN to Ru atoms, which necessitates bond cleavage of the N-Ru interaction prior to D atom adsorption. D begins desorbing from N-HOPG at ~573 K and is fully desorbed by ~973 K, whereas desorption from N-doped graphene on Ru(0001) begins at ~290 K, with complete desorption observed at ~700 K, indicating that the Ru metal weakens the N-D bond strength. We also studied a high-surface-area, layered, and porous N-doped carbon material, internally labeled NC900, which was synthesized by pyrolysis of glucose and graphitic carbon nitride (g-C3N4) at 1173 K. D exposure caused a +1.1 eV PN peak shift in NC900, with no change in the GN peak. Moreover, the NC900 exhibited the same desorption behavior as HOPG, demonstrating that well-defined model systems can effectively capture the behavior of more complex N-doped carbon materials.

Alupothe Gedara, Buddhika S.↗