SEARCH · Engineering Papers

Results for “control algorithm”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Five degree-of-freedom control of an ultra-precision magnetically-suspended linear bearing

The authors constructed a high precision linear bearing. A 10.7 kg platen measuring 125 mm by 125 mm by 350 mm is suspended and controlled in five degrees of freedom by seven electromagnets. The position of the platen is measured by five capacitive probes which have nanometer resolution. The suspension acts as a linear bearing, allowing linear travel of 50 mm in the sixth degree of freedom. In the laboratory, this bearing system has demonstrated position stability of 5 nm peak-to-peak. This is believed to be the highest position stability yet demonstrated in a magnetic suspension system. Performance at this level confirms that magnetic suspensions can address motion control requirements at the nanometer level. The experimental effort associated with this linear bearing system is described. Major topics are the development of models for the suspension, implementation of control algorithms, and measurement of the actual bearing performance. Suggestions for the future improvement of the bearing system are given.

Trumper, David L.↗

NASA NTRS1991

Pointing/roll mechanism for the ultraviolet coronagraph spectrometer

A pointing/roll mechanism for the Ultraviolet Coronagraph Spectrometer (UVCS) is presented along with a description of the mechanism control algorithm. The mechanism, operating in space, will position the 2.1 meter long, 0.7 meter diameter UVCS instrument in pitch and yaw, within a 54 arc-minute half angle cone, and will also allow it to rotate + or - 179.75 deg. After considerable design effort, an optimum mechanical solution was achieved, which meets all scientific requirements as well as weight, volume, and power budgets. Evolution of the mechanism is presented along with the design status.

Ostaszewski, Miroslaw A.↗

NASA NTRS1991

Control strategy for cooperating disparate manipulators: Non-colocated control of disturbances of a flexible arm

The long term objectives for this research are to use a small robot arm to compliment a large robot arm. Disturbances generated by robot tasks were studied. Available equipment made it convenient to study disturbances generated by an abrasive cut off saw mounted on the tip of a large armed robot, and used to cut through rods and pipes in the range of 0.5 in. to 1.5 in. The abrasive process was modeled as a friction operation. The operation of the cut off saw was performed autonomously and under teleoperated control. The behavior was stable in both cases for a P-D joint control algorithm. It was found that broad band excitation during the cutting operation is capable of exciting arm natural frequencies to above the third natural frequency of the arm. The direction of cut changed the modes excited due to the change in coupling coefficients.

Lew, Jae Y.↗

NASA NTRS1991

Optimizing aircraft performance with adaptive, integrated flight/propulsion control

The Performance-Seeking Control (PSC) integrated flight/propulsion adaptive control algorithm presented was developed in order to optimize total aircraft performance during steady-state engine operation. The PSC multimode algorithm minimizes fuel consumption at cruise conditions, while maximizing excess thrust during aircraft accelerations, climbs, and dashes, and simultaneously extending engine service life through reduction of fan-driving turbine inlet temperature upon engagement of the extended-life mode. The engine models incorporated by the PSC are continually upgraded, using a Kalman filter to detect anomalous operations. The PSC algorithm will be flight-demonstrated by an F-15 at NASA-Dryden.

Smith, R. H.↗

NASA NTRS1990

Field oriented control of induction motors

Induction motors have always been known for their simple rugged construction, but until lately were not suitable for variable speed or servo drives due to the inherent complexity of the controls. With the advent of field oriented control (FOC), however, the induction motor has become an attractive option for these types of drive systems. An FOC system which utilizes the pulse population modulation method to synthesize the motor drive frequencies is examined. This system allows for a variable voltage to frequency ratio and enables the user to have independent control of both the speed and torque of an induction motor. A second generation of the control boards were developed and tested with the next point of focus being the minimization of the size and complexity of these controls. Many options were considered with the best approach being the use of a digital signal processor (DSP) due to its inherent ability to quickly evaluate control algorithms. The present test results of the system and the status of the optimization process using a DSP are discussed.

Burrows, Linda M.↗

NASA NTRS1992

Reflexive Avoidance Of Obstacles By Robots

Array of sensors at elbow of robotic manipulator detects obstacles. Outputs of sensors processed into synthetic "force field" around each obstacle. Algorithm controlling manipulator uses "force field" to maneuver manipulator arm around each obstacle.

Vold, Havard I.↗

NASA NTRS1992

Study Of Robotic Replacement Of Equipment Modules

Report discusses issues pertaining to control of single-arm robotic manipulator to remove and install interchangeable equipment modules. Presents preliminary control strategy intended to guide development of control algorithms, along with analyses of problems arising in implementing strategy.

Backes, Paul G.↗

NASA NTRS1991

Mark 4A antenna control system data handling architecture study

A high-level review was conducted to provide an analysis of the existing architecture used to handle data and implement control algorithms for NASA's Deep Space Network (DSN) antennas and to make system-level recommendations for improving this architecture so that the DSN antennas can support the ever-tightening requirements of the next decade and beyond. It was found that the existing system is seriously overloaded, with processor utilization approaching 100 percent. A number of factors contribute to this overloading, including dated hardware, inefficient software, and a message-passing strategy that depends on serial connections between machines. At the same time, the system has shortcomings and idiosyncrasies that require extensive human intervention. A custom operating system kernel and an obscure programming language exacerbate the problems and should be modernized. A new architecture is presented that addresses these and other issues. Key features of the new architecture include a simplified message passing hierarchy that utilizes a high-speed local area network, redesign of particular processing function algorithms, consolidation of functions, and implementation of the architecture in modern hardware and software using mainstream computer languages and operating systems. The system would also allow incremental hardware improvements as better and faster hardware for such systems becomes available, and costs could potentially be low enough that redundancy would be provided economically. Such a system could support DSN requirements for the foreseeable future, though thorough consideration must be given to hard computational requirements, porting existing software functionality to the new system, and issues of fault tolerance and recovery.

Briggs, H. C.↗

NASA NTRS1991

Modeling and Control of the Automated Radiator Inspection Device

Many of the operations performed at the Kennedy Space Center (KSC) are dangerous and repetitive tasks which make them ideal candidates for robotic applications. For one specific application, KSC is currently in the process of designing and constructing a robot called the Automated Radiator Inspection Device (ARID), to inspect the radiator panels on the orbiter. The following aspects of the ARID project are discussed: modeling of the ARID; design of control algorithms; and nonlinear based simulation of the ARID. Recommendations to assist KSC personnel in the successful completion of the ARID project are given.

Dawson, Darren↗

NASA NTRS1990

Minimizing attitude control fuel in space manipulator systems

Techniques are presented for finding space manipulator motions which result in reduced spacecraft dynamic disturbances. Although a spacecraft's attitude control reaction jets can compensate for these disturbances, reaction jet fuel is a limited resource and excessive disturbances would limit the life of a space manipulator. A graphical tool called the Enhanced Disturbance Map (EDM) is presented and is demonstrated as an aid in developing planning and control algorithms to solve this complex problem.

Dubowsky, Steven↗

NASA NTRS1991

Dynamics and control of a tumbling satellite retrieval device

The problem of capturing a satellite in an uncontrolled three-axis tumble is addressed. The proposed solution is a truss which opens and engulfs the satellite, resulting in coincident centers of mass. Torques are then applied to the truss so that it matches the tumble rates of the satellite and remains motionless in the satellite's reference frame. Equations are derived which show how to vary the mass distribution to match any set of inertia moment ratios. The physical system is shown to be controllable. An optimal control algorithm for tumble matching is then derived and a computer simulation is developed.

Neff, J. M.↗

NASA NTRS1991

Minimum jerk trajectory planning for robotic manipulators

It has been experimentally verified that the jerk of the desired trajectory adversely affects the performance of the tracking control algorithms for robotic manipulators. In this paper, the reasons behind this effect are investigated, and an optimization problem that minimizes joint jerk over a prespecified Cartesian space trajectory is stated. The necessary conditions are derived, and a numerical algorithm is presented.

Kyriakopoulos, K. J.↗

NASA NTRS1992

Controlled motion in an elastic world. Research project: Manipulation strategies for massive space payloads

The flexibility of the drives and structures of controlled motion systems are presented as an obstacle to be overcome in the design of high performance motion systems, particularly manipulator arms. The task and the measure of performance to be applied determine the technology appropriate to overcome this obstacle. Included in the technologies proposed are control algorithms (feedback and feed forward), passive damping enhancement, operational strategies, and structural design. Modeling of the distributed, nonlinear system is difficult, and alternative approaches are discussed. The author presents personal perspectives on the history, status, and future directions in this area.

Book, Wayne J.↗

NASA NTRS1991

Manned maneuvering unit applications for automated rendezvous and capture

Automated Rendezvous and Capture (AR&C) is an important technology to multiple National Aeronautics and Space Administration (NASA) programs and centers. The recent Johnson Spacecraft Center (JSC) AR&C Quality Function Deployment (QFD) has listed on-orbit demonstration of related technologies as a near term priority. Martin Marietta has been evaluating use of the Manned Maneuvering Unit (MMU) for a low cost near term on-orbit demonstration of AR&C technologies such as control algorithms, sensors, and processors as well as system level performance. The MMU Program began in 1979 as the method of repairing the Space Shuttle (STS) Thermal Protection System (the tiles). The units were not needed for this task, but were successfully employed during three Shuttle flights in 1984: a test flight was flown in in February as proof of concept, in April the MMU participated in the Solar Max Repair Mission, and in November the MMU's returned to space to successfully rescue the two errant satellites, Westar and Palapa. In the intervening years, the MMU simulator and MMU Qualification Test Unit (QTU) have been used for Astronaut training and experimental evaluations. The Extra-Vehicular Activities (EVA) Retriever has used the QTU, in an unmanned form, as a free-flyer on the Johnson Space Center (JSC) Precision Air Bearing Floor (PABF). Currently, the MMU is undergoing recertification for flight. The two flight units were removed from storage in September, 1991 and evaluation tests were performed. The tests demonstrated that the units are in good shape with no discrepancies that would preclude further use. The Return to Flight effort is currently clearing up recertification issues and evaluating the design against the present Shuttle environments.

Brehm, Donald L.↗

NASA NTRS1991

A berthing and fastening strategy for orbital replacement units

Research in the area of berthing of Orbital Replacement Units (ORU's) at the GSFC consists of two major parts. First, we concentrate on the development of a comprehensive fastening strategy that can provide both mechanical as well as electrical connection to the ORU. Second, our efforts in robot collision avoidance and motion planning have led to the development of a state-of-the-art capacitive proximity sensor with associated motion control algorithms. These efforts combine to produce a system that allows safe and reliable machine assisted berthing. Although our main emphasis was on berthing of ORU's, we believe that some of our results can also be applied to docking.

Vranish, John↗

NASA NTRS1993

Recent refinements and increased capabilities in balloon vertical performance analysis

The NASA Thermal Trajectory analysis model for predicting the vertical performance of balloons is described in terms of two critical refinements and recent results. The model employs heat-balance equations and a vertical equation of motion, and revised methods are employed to predict maximum balloon volume, balloon shape, and the continuous computation of gas loss. Also incorporated are modeling techniques for assessing the solar radiation input that can affect the load tapes, and autoballast control algorithms are employed. The model permits the evaluation of the presence of cap layers as well as the effects of small leaks and programmed venting. The revised model is shown to give good predictions of balloon performance during flight in terms of altitude changes, descent rates, gas-mass flow, and leak potential. The model is found to be more versatile due to autoballasting and leak analysis, and good prediction are possible for the float phase and descent of current balloon shapes.

Conrad, G. R.↗

NASA NTRS1993

Numerical model for the Programmable Multirole Furnace (PMZF)

The present account of the Programmable Multizone Furnace numerical model uses various examples to illustrate the ways in which the model serves as an optimization, test, prediction, and visualization tool; a numerical PID-control algorithm obtains the desired sample temperature distributions and allows the model to solve an inverse heat transfer problem where the desired sample temperature profile is the input and the required heater power distribution is the output of numerical simulations. Parametric studies show how the total power consumption of the furnace is affected by such design variables as the conductivity.

Kassemi, M.↗

NASA NTRS1992

MAGIK robotics simulation - A window on Space Station Freedom

The MAGIK program is the primary kinematic analysis tool used by the Robotic Systems group at MDSSC. It allows users to conduct man-in-the-loop analyses to evaluate space robotic operations, including reach, clearance, and accessibility. MAGIK can be used to model, specify, simulate, analyze, and modify n-jointed type manipulators and their respective control algorithms. The MAGIK simulation currently implements kinematic models of all robotic devices currently baselined on Space Station Freedom (SSF).

Read, David A.↗