High reliability dc amplifier Final report
Design and fabrication of high reliability differential dc amplifier for Saturn hydraulic engine control
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Design and fabrication of high reliability differential dc amplifier for Saturn hydraulic engine control
This letter reports the performance of a novel single-stage W-band amplifier fabricated utilizing flip-chip bump-bonding. We have bump-bonded a high-speed, low-noise InP high electron mobility transistor (HEMT) device onto a separately fabricated passive circuit having a GaAs substrate.
We report common base power amplifiers designed for 140-220 GHz frequency band in InP mesa double heterojunction bipolar transistor (DHBT) technology.
Colloidal nanoplatelets of HgSe and HgTe prepared indirectly through cation exchange reactions can transfer many of the advantageous properties of atomically precise, 2D cadmium chalcogenides to the near-infrared (NIR) spectral window. In this work, HgSe and HgTe nanoplatelets are studied to understand their fundamental photophysical properties, particularly those areas of similarity and difference from cadmium-based NPLs, and to examine their potential as optical gain media. Similar to cadmium chalcogenide NPLs, low-temperature photoluminescence of HgTe NPLs displays two-color emission that depends on temperature, sample, fluence, excitation frequency, and irradiation time. Both HgTe and HgSe show nanosecond emission dynamics at temperatures as low as 2.5 K, with no indication that bright-dark excitonic splitting governs the low-temperature photoluminescence. Collectively, experimental data is most consistent with emission from a negative trion state at low temperature. Although the mercury chalcogenide nanoplatelets are shown to have broadened optical resonances compared to the cadmium chalcogenides from which they are derived, they retain slow Auger recombination and can display low-threshold amplified spontaneous emission in the NIR spectral window. Optical pumping thresholds for HgTe NPLs are observed as low as 4.4 µJ cm -2 and highlight the potential 2D nanoplatelets as gain medium in the near-infrared.
The nonlinear effect of two-photon absorption (TPA) on the performance of all-optical XOR gate using quantum dot semiconductor optical amplifiers (QDSOAs)-assisted Mach–Zehnder interferometer is numerically analyzed and investigated at a data rate of 2 Tb/s. The dependence of the quality factor (QF) on the critical parameters of the input signal and QDSOA is examined and assessed. The obtained QFs for the all-optical XOR gate using QDSOAs-MZI at 2 Tb/s with TPA and without TPA are 14 and 8, respectively.
Encryption of information is required to secure data transmitted in optical networks. In this communication, authors propose simple and novel scheme for all-optical encryption–decryption at 120 Gb/s. Encryption–decryption system is based on XOR logic designed using semiconductor optical amplifier (SOA) based Mach–Zehnder interferometers. SOA model is presented theoretically from the stand point of high-speed application and implemented in encryption decryption setups for simulation. Extinction ratio for encrypted and decrypted signal is obtained as 10.5 dB and 8.30 dB respectively with satisfactory quality factor. The system has simple, compact architecture and easily integrable with other photonic devices.
A Hamiltonian model that includes two-photon interaction with a two-level atom and a degenerate parametric amplifier is considered. By invoking a canonical transformation an exact solution of the wave function in the Schroedinger picture is obtained. The result presented in this context is employed to discuss the purity, the entropy squeezing, and the variance squeezing, in addition to the normal squeezing. It has been shown that the existence of the second harmonic generation leads to reduction in the squeezing amount for all quadrature variances and we found that as the value of the coupling parameter {lambda}{sub 2} increases the squeezing phenomenon gets more apparent. Further we have also considered the Q-function as an example of the quasi-probability distribution.
Electron beam lithography (EBL) of chemically amplified resists (CARs) faces fundamental challenges, including stochastic electron scattering and acid diffusion, that limit resolution and reproducibility. Using SU-8 as a model CAR, this study systematically investigated complementary strategies to address these challenges, combining multipass exposure, proximity effect correction (PEC) with midrange correction factors, base quencher incorporation, and post-exposure bake (PEB) suppression. Monte Carlo simulations and calibrated PEC modeling revealed that extending the point spread function to include a midrange scattering component significantly improved critical dimension (CD) control across varying pattern densities, correcting deviations that conventional two-term PEC failed to capture. Multipass exposure, particularly 4-pass writing with a 25% offset, redistributed the dose to average stochastic beam and scattering fluctuations, reducing line-width roughness by more than 50% and yielding more uniform nanoscale features. Photoacid confinement was investigated by adding urea as a base quencher, which successfully reduced acid diffusion but introduced substantial sensitivity penalties without improving ultimate resolution or Z-factor performance, underscoring the trade-offs of chemical versus physical confinement. Suppressing PEB most directly minimized acid diffusion, resulting in improved Z-factors and reproducible 30 nm half-pitch dense line/space patterns. Overall, these results demonstrated that PEC with midrange correction, multipass strategies, quencher additives, and PEB-free processing addresses different aspects of the EBL process window and that their integration provides a comprehensive framework for managing stochastic scattering, diffusion, and chemical amplification effects. This framework advances dense nanoscale patterning in CARs and establishes guiding principles for optimizing resist design and process strategies in high-resolution EBL and potentially other advanced lithographies, such as extreme ultraviolet (EUV) lithography.
A systematic stability analysis method using theoretical tools combining linear and self-consistent nonlinear theory is presented to analyze an ultrahigh gain gyrotron traveling-wave (gyro-TWT) amplifier operated in the fundamental TE{sub 11} mode in the Ka-band. It characterizes the role that the backward-wave component plays in the internal feedback physical processes of two major kinds of self-induced oscillations associated with TE{sub 11}{sup (1)} absolute instability and TE{sub 21}{sup (2)} gyrobackward-wave oscillation. For the first time, self-induced constriction in TE{sub 11}{sup (1)} absolute instability caused by a strong backward-wave component is revealed through simulation. Both the thickness and resistivity of the distributed wall loss loaded on the inside of the interaction waveguide have obvious effects on stabilizing both kinds of oscillations. Following the stability analysis, a multistage interaction circuit is proposed by nonlinear analysis which shortens the length of the entire structure and enables the ultrahigh gain gyro-TWT to operate with high stability and wide bandwidth.
By delivering unprecedented power and gain, the gyrotron traveling-wave amplifier (gyro-TWT) offers great promise for advanced millimeter wave radars. However, the underlying physics of this complex nonlinear system is yet to be fully elucidated. Here, we report a new phenomenon in the form of nonlinearly driven oscillations. A zero-drive stable gyro-TWT is shown to be susceptible to a considerably reduced dynamic range at the band edge, followed by a sudden transition into driven oscillations and then a hysteresis effect. An analysis of this unexpected behavior and its physical interpretation are presented.
Recently it has been pointed out that numerical simulation of some systems containing charged particles with highly relativistic directed motion can by speeded up by orders of magnitude by choice of the proper Lorentz boosted frame. A particularly good example is that of short wavelength free-electron lasers (FELs) in which a high energy (E{sub 0}{>=}250 MeV) electron beam interacts with a static magnetic undulator. In the optimal boost frame with Lorentz factor {gamma}F, the red-shifted FEL radiation and blue shifted undulator have identical wavelengths and the number of required time-steps (presuming the Courant condition applies) decreases by a factor of {gamma}{sub F}{sup 2} for fully electromagnetic simulation.We have adapted the WARP code to apply this method to several FEL problems including coherent spontaneous emission (CSE) from pre-bunched e-beams, and strong exponential gain in a single pass amplifier configuration. We discuss our results and compare with those from the 'standard' FEL simulation approach which adopts the eikonal approximation for propagation of the radiation field.
Longitudinal modulation of a relativistic electron beam in the THz range is important for advanced laser- or beam-driven plasma accelerators operating in the 10{sup 16}-10{sup 18} cm{sup -3} plasma density range. We describe a single-pass FEL amplifier-buncher which is under construction at the UCLA Neptune laboratory. Microbunching on the 0.5-3 THz frequency scale is achieved during the process of a resonant FEL interaction between an electron beam and a THz seed pulse. A narrow-band, low-power THz seed source based on the frequency mixing of CO{sub 2} laser lines in a GaAs nonlinear crystal is built and fully characterized. The THz radiation pulse generated by this source will be guided through a hollow waveguide inside the planar FEL undulator driven by a regular photoinjector. By using a time-dependent FEL code GENESIS 1.3, we optimized the undulator parameters and analyzed the dynamics of the modulated electron beam. At present, the THz FEL microbuncher is being built and we update the status of the project.
The millimeter microwave source of gyrotron-traveling-wave amplifier (gyro-TWT) is capable of generating high power coherent radiation in a broad bandwidth, while its performance is severely deteriorated by the stability problems. This paper focuses on modeling and the stability analysis of the Naval Research Laboratory (NRL) Ka-band TE{sub 01} mode gyro-TWT based on an interaction circuit alternately loaded with lossy ceramic shells and metal rings. The propagation characteristics of the interaction circuit is analyzed first, based on which the boundary impedance method is employed to build an equivalent uniform lossy circuit. Then the stability of the interaction system is studied using linear and nonlinear theories. The analysis reveals that, due to the special waveguide structure and the dielectric loss, the propagation characteristics of the complex waveguide are similar to that of a uniform lossy circuit. The analysis of the absolute instabilities characterizes the roles the forward-backward-wave components played. The study indicates that the lowest threshold current of the absolute instabilities is higher than the operating current, which brings the system high stability. The reliability of the analysis is proved by the consistency between the analysis and the NRL experimental results.
The problem of spurious oscillations induced by absolute instabilities is the most challenging one that hinders the development of the millimeter-wave gyrotron traveling-wave amplifiers (gyro-TWTs). A spurious oscillation exists as a high order axial mode (HOAM) in the interaction circuit. This paper is devoted to demonstrating the complicated steady states of these HOAMs and exploring corresponding techniques to stabilize these potential multi-steady-state absolute instabilities. The stability-oriented design principle is conveyed in a start-to-end design flow of a Ka-band TE{sub 11} mode gyro-TWT. Strong magnetic tapering near the downstream port, which is capable of cutting short the effective interaction circuit of a spurious oscillation and simultaneously boosting the amplification performance, is for the first time proposed to further improve the system stability. It is also found that an ideal prebunched electron beam in the linear stage is the necessary condition to efficient amplification in the nonlinear stage, suggesting that it is feasible to design a stable prebunching stage to replace the distributed-loss-loaded linear stage. The stability-oriented design principle provides more explicit reference for future design of a zero-drive stable gyro-TWT.
An all-optical heterodyne approach based on a room-temperature controlled semiconductor optical amplifier (SOA) for measuring the frequency and linewidth of the terahertz beat-tone signal from a passively mode-locked laser is proposed. Under the injection of two external cavity lasers, the SOA acts as a local oscillator at their detuning frequency and also as an optical frequency mixer whose inputs are the self-modulated spectrum of the device under test and the two laser beams. Frequency and linewidth of the intermediate frequency signal (and therefore, the beat-tone signal) are resolved by using a photodiode and an electrical spectrum analyzer.
Particle-in-cell simulations of a staggered double grating array traveling wave tube intended as a wideband amplifier for terahertz communications, sensing, and imaging applications showed that, for an electron beam power of 5 kW, it produces 150-275 W, corresponding to 3%-5.5% electronic efficiency, at 0.22 THz with over {approx}30% bandwidth and with greater than 12 dB/cm growth rate. The circuit has been fabricated by both UV lithography and high precision computer-numerical-control machining with {approx}2-3 {mu}m dimensional tolerance and {approx}50 nm surface roughness. A scandate nanocomposite (Sc{sub 2}O{sub 3}-W) cathode for the electron beam source has successfully emitted 120 A/cm{sup 2} (space charge limited) at 1150 deg. C and 50 A/cm{sup 2} at 1050 deg. C for 8000 h as required to produce the requisite high current density electron beam.
A free electron laser (FEL) in a mode-locked optical klystron (MLOK) configuration is modelled using start-to-end simulations that simulate realistic electron beam acceleration and transport before input into a full three-dimensional FEL simulation code. These simulations demonstrate that the MLOK scheme is compatible with the present generation of radiofrequency accelerator designs. A train of few-optical cycle pulses is predicted with peak powers similar to those of the equivalent conventional FEL amplifier. The role of electron beam energy modulation in these results is explained and the limitations of some simulation codes discussed. It is shown how seeding the FEL interaction using a High Harmonic seed laser can improve the coherence properties of the output.
In this paper, we describe micro-fabrication, RF measurements, and particle-in-cell (PIC) simulation modeling analysis of the 0.22 THz double-vane half period staggered traveling wave tube amplifier (TWTA) circuit. The TWTA slow wave structure comprised of two sections separated by two sever ports loaded by loss material, with integrated broadband input/output couplers. The micro-metallic structures were fabricated using nano-CNC milling and diffusion bonded in a three layer process. The 3D optical microscopy and SEM analysis showed that the fabrication error was within 2-3 {mu}m and surface roughness was measured within 30-50 nm. The RF measurements were conducted with an Agilent PNA-X network analyzer employing WR5.1 T/R modules with a frequency range of 178-228 GHz. The in-band insertion loss (S{sub 21}) for both the short section and long section (separated by a sever) was measured as {approx}-5 dB while the return loss was generally around {approx}-15 dB or better. The measurements matched well with the S-matrix simulation analysis that predicted a 3 dB bandwidth of {approx}45 GHz with an operating frequency at 220 GHz. However, the measured S{sub 21} was {approx}3 dB less than the design values, and is attributed to surface roughness and alignment issues. The confirmation measurements were conducted over the full frequency band up to 270 GHz employing a backward wave oscillator (BWO) scalar network analyzer setup employing a BWO in the frequency range 190 GHz-270 GHz. PIC simulations were conducted for the realistic TWT output power performance analysis with incorporation of corner radius of 127 {mu}m, which is inevitably induced by nano-machining. Furthermore, the S{sub 21} value in both sections of the TWT structure was reduced to correspond to the measurements by using a degraded conductivity of 10% International Annealed Copper Standard. At 220 GHz, for an elliptic sheet electron beam of 20 kV and 0.25 A, the average output power of the tube was predicted to be reduced from 90 W (for ideal conductivity/design S-parameters) to 70 W (for the measured S-parameters/inferred conductivity) for an average input power of 50 mW. The gain of the tube remains reasonable: {approx}31.4 dB with an electronic efficiency of {approx}1.4%. The same analysis was also conducted for several frequencies between 190 GHz-260 GHz. This detailed realistic PIC analysis demonstrated that this nano-machined TWT circuit has slightly reduced S-parameters and output power from design, but within an acceptable range and still have promising output power, gain, and band width as required. Thus, we expect to meet the specifications of 1000 W-GHz for the darpa program goals.