Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Step”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

The sun-tracking control of solar collectors using high-performance step motors

Sun-tracking solar energy-focusing devices involving a central receiver, thermionic conversion, or a distributed solar thermal collector system are described. The Perkins solar collector uses a fixed focal point about which an 18 m-diameter parabolic dish moves on tracks. The elevation axis also moves on a circular track. A microprocessor manipulates sun sensor information and sun ephemeris data to ensure correct placement. Stepper motors are digital devices which provide direct interface with digital electronics and a wide dynamic range, and could easily be associated with the microprocessors. Design philosophy, performance criteria, wind load analysis, and control system requirements are also discussed.

Hughes, R. O.↗
NASA NTRS1977

The momentum transfer of incompressible turbulent separated flow due to cavities with steps

An experimental study was conducted using a plate test bed having a turbulent boundary layer to determine the momentum transfer to the faces of step/cavity combinations on the plate. Experimental data were obtained from configurations including an isolated configuration and an array of blocks in tile patterns. A momentum transfer correlation model of pressure forces on an isolated step/cavity was developed with experimental results to relate flow and geometry parameters. Results of the experiments reveal that isolated step/cavity excrecences do not have a unique and unifying parameter group due in part to cavity depth effects and in part to width parameter scale effects. Drag predictions for tile patterns by a kinetic pressure empirical method predict experimental results well. Trends were not, however, predicted by a method of variable roughness density phenomenology.

White, R. E.↗
NASA NTRS1978

Next steps in space transportation and operations

Design of a 25-kW power or utilities module, capable of extending the effective duration of Spacelab missions, is discussed. The power module, planned for availability in 1984, could also support a Spacelab modified to be a free-flyer by providing attitude control and power. In addition, development of a 250-kW power module to support a Shuttle-tended space platform or a Shuttle-tended space construction base is projected. A free-flying teleoperator capable of deboosting Skylab, systems to construct large planar arrays in space, and a habitable module providing crew quarters for continuously manned operations are also described.

Disher, J. H.↗
NASA NTRS1978

The Space Telescope - A giant step in astronomy

The astronomer's capacity for observation will be tremendously enhanced by NASA's Space Telescope, a multipurpose optical telescope in earth orbit which will enable man to gaze seven times farther into space than has now been done, possibly to the outer edges of the universe. The Space Telescope is to be placed in orbit in 1983 by the NASA Space Shuttle. The turbulence of the earth atmosphere imposes practical limitations in all but a very few types of astronomical observations conducted on the surface of the earth. The Space Telescope, high above the hazy and turbulent atmosphere, will enable scientists to see the heavens clearly for the first time. The Space Telescope is a superb system that fully exploits the advantages of space observations and will dramatically extend the astronomer's capabilities beyond ground-based telescopes.

Odell, C. R.↗
NASA NTRS1978

The 25 kW power module - First step beyond the baseline STS

The backbone of the first reusable Space Transportation System (STS) is the Space Shuttle. The 25 kW Power Module is currently being defined by NASA as the first significant increment in capability beyond the baseline STS and is to be available for use in 1983. The Power Module is an orbit-based space system which will augment the capability of the Space Shuttle Orbiter to support Spacelab sortie missions and will provide a unique free-flying mode for a variety of payloads which require high capability, long duration, and man-tended operation. The Power Module will make it possible for the Space Shuttle Orbiter and Spacelab to remain on-orbit for periods of time significantly in excess of that provided by the baseline STS (7 days) without major penalty to the Shuttle and its payload.

Mordan, G. W.↗
NASA NTRS1980

Semiconductor step-stress testing

Report documents behavior of discrete diodes and transistors in extensive power and temperature overstress tests. Thirty nine devices were tested in groups designated: (1) power overstress, and (2) and (3) temperature overstress. Results are of interest to users of tested components and engineers in conduction of similar tests.

Meeks, H. B.↗
NASA NTRS1979

Apparatus for providing a servo drive signal in a high-speed stepping interferometer

An analog voltage approximately linearly proportional to a desired offset from the present null position of a moving mirror in an interferometer is applied to the mirror moving means. As the mirror moves to the next null position, as determined by the analog voltage, the fringes of a laser reference interference pattern are detected. At the occurrence of each fringe the analog voltage is reduced proportionally so that when the next null position is reached, this driving analog is effectively zero. A binary up/down counter, by its internal count, causes a digital/analog converter to supply the analog voltage to the mirror moving means. Fringe detection and direction of movement logic cause the binary up/down counter to be decremented from its offset count as the mirror is moved to the new null position. Undesirable movement of the mirror due to vibration or other sources causes a correcting drive signal to be applied to the mirror moving means that is proportional to the distance of movement.

Schindler, R. A.↗
NASA NTRS1979

Probability of failure prediction for step-stress fatigue under sine or random stress

A previously proposed cumulative fatigue damage law is extended to predict the probability of failure or fatigue life for structural materials with S-N fatigue curves represented as a scatterband of failure points. The proposed law applies to structures subjected to sinusoidal or random stresses and includes the effect of initial crack (i.e., flaw) sizes. The corrected cycle ratio damage function is shown to have physical significance.

Lambert, R. G.↗
NASA NTRS1980

The development of a stepped frequency microwave radiometer and its application to remote sensing of the Earth

The design, development, application, and capabilities of a variable frequency microwave radiometer are described. This radiometer demonstrated the versatility, accuracy, and stability required to provide contributions to the geophysical understanding of ocean and ice processes. A closed-loop feedback method was used, whereby noise pulses were added to the received electromagnetic radiation to achieve a null balance in a Dicke switched radiometer. Stability was achieved through the use of a constant temperature enclosure around the low loss microwave front end. The Dicke reference temperature was maintained to an absolute accuracy of 0.1 K using a closed-loop proportional temperature controller. A microprocessor based digital controller operates the radiometer and records the data on computer compatible tapes. This radiometer exhibits an absolute accuracy of better than 0.5 K when the sensitivity is 0.1 K. The sensitivity varies between 0.0125 K and 1.25 K depending upon the bandwidth and integration time selected by the digital controller. Remote sensing experiments were conducted from an aircraft platform and the first radiometeric mapping of an ocean polar front; exploratory experiments to measure the thickness of lake ice; first discrimination between first year and multiyear ice below 10 GHz; and the first known measurements of frequency sensitive characteristics of sea ice.

Harrington, R. F.↗
NASA NTRS1981

A Supra-Thermal Energetic Particle detector (STEP) for composition measurements in the range approximately 20 keV/nucleon to 1 MeV/nucleon

A detector system is described, employing a time-of-flight versus residual energy technique which allows measurement of particle composition (H-Fe), energy spectral and anisotropies in an energy range unaccessible with previously flown sensors. Applications of this method to measurements of the solar wind ion composition are discussed.

Mason, G. M.↗
NASA NTRS1981

Method of making V-MOS field effect transistors utilizing a two-step anisotropic etching and ion implantation

A method of making V-MOS field effect transistors is disclosed wherein a masking layer is first formed over a surface of a crystalline substrate. An aperture is then formed in the masking layer to expose the surface of the substrate. An anisotropic etchant is applied to the exposed surface so that a groove having a decreasing width within increasing depth is formed. However, the etch is not allowed to go to completion with the result that a partially formed V-shaped groove is formed. Ions are accelerated through the aperture for implantation in the crystalline substrate in the lower portion of the partially formed V-shaped groove. Thereafter, an anisotropic etchant is reapplied to the partially formed V-shaped groove, and the etch is allowed to go to completion.

Jhabvala, M. D.↗
NASA NTRS1982

One-step dual purpose joining technique

This fastener used in induction heating is a wire screen basically of an eddy current carrying material such as carbon steel. Selected wires in the screen are copper, sheathed in an insulating material. The screen is placed between two sheets of thermoplastics. When inductively heated, the composite softens and flows around the apertures of the screen. After this heating and joining, the copper wires may be used to conduct electricity.

Buckley, J. D.↗
NASA NTRS1981

High-latitude ionospheric model - First step towards a predictive capability

In order to study the plasma density features associated with both weak and strong convection in the winter high-latitude F-region, a simple plasma convection model was combined with an ionospheric-atmospheric composition model. In a model calculation, a field tube of plasma is followed as it moves along a convection trajectory through a moving, neutral atmosphere. The altitude profiles of the ion densities are obtained by solving the appropriate continuity, momentum and energy equations, including many high-latitude processes. The result of following many such plasma field tubes is a time-dependent, three-dimensional ion density distribution for the ions NO(+), O2(+), O(+), N(+), and He(+). The high-latitude ionosphere is covered over one complete day above 42 deg N magnetic latitude, at altitudes of 160-800 km.

Schunk, R. W.↗