SEARCH · Engineering Papers

Results for “REACTION CONTROL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

All sources NASA NTRS DOE OSTI

NASA NTRS1983

Orbiter operations in close proximity to free-flying satellites or formation flying in space

The seventh orbital flight of the Space Shuttle had as one of its primary objectives the testing of the vehicle's capability for proximity operations (defined as anytime the Orbiter is within 1000 feet of another satellite). The goals of these tests were to obtain flight data on different techniques for separation from, stationkeeping with, and approach and capture of a free-flying satellite. This included the acquisition of data on technique evaluation as to propellant usage, time required, crew workload, plume disturbance to the payload by the reaction control system, and jet plume impingement. The tests were also to provide data on the rendezvous radar and optical sighting devices performance in this environment. It is concluded that the Orbiter proved to be a very responsive vehicle that ws straightforward to fly in the vicinity of another satellite given the proper experience base with ground simulations.

Crippen, R. L.↗

NASA NTRS1984

Performance evaluation of the atmospheric phase of aeromaneuvering orbital transfer vehicles

Studies are underway to design reusable orbital transfer vehicles that would be used to transfer payloads from low-earth orbit to higher orbits and return. One promising concept is to use an atmospheric pass on the return leg to reduce the amount of fuel for the mission. This paper discusses a six-degree-of-freedom simulation analysis for two configurations, a low-lift-to-drag ratio configuration and a medium-lift-to-drag ratio configuration using both a predictive guidance technique and an adaptive guidance technique. Both guidance schemes were evaluated using the 1962 standard atmosphere and three atmospheres that had been derived from three entries of the Space Shuttle. The predictive technique requires less reaction control system activity for both configurations, but because of the limited number of updates and because each update used the 1962 standard atmosphere, the adaptive technique produces more accurate exit conditions.

Powell, R. W.↗

NASA NTRS1984

An analysis of return flux from the Space Shuttle Orbiter RCS engines

The return flux from the Space Shuttle Orbiter reaction control system (RCS) engines to sensors in the open payload bay has been analyzed on the basis of Shuttle/Payload Contamination Evaluation (SPACE II) model predictions and orbital flight measurements. Model data are presented showing the variations of molecular return flux values with Orbiter orientation and instrument direction. The effects of multiple molecular collisions within RCS engine plumes and in their vicinity are discussed. These collisions significantly influence the amount of plume molecules returning to payload instruments and, therefore, the amount of contaminants received.

Ehlers, H. K. F.↗

NASA NTRS1983

Mass spectrometer

The quadrupole Mass Spectrometer of the Induced Environment Contamination Monitor (IECM) operates in the range from 2 to 150 amu. It is pointed out that the Mass Spectrometer on STS-2 performed very well. It was found that the column density of H2O effluent from the Shuttle reached a maximum of 1 x 10 to the 13th per sq cm at 7 hr, 30 min and decreased by a factor of 7.5 during the subsequent 40 hrs. The count rate response of H2O could be correlated with mission-related events, taking into account the dumping of supply water, the operation of the Flash Evaporator System, and the firing of a primary reaction control system engine.

Miller, E. R.↗

NASA NTRS1982

Technology status report on hydrocarbon-fueled engines for space transportation systems

Liquid oxygen/hydrocarbon (LOX/HC) fueled engines are being considered for use in future high-pressure engines for launch vehicles and as possible replacements for the orbital maneuvering system and reaction control system engines on the Space Shuttle. High performance, reusability, and low life cycle cost are required for these applications. A technology base for these engines is now being established. This paper provides a review of recent results from LOX/HC technology contracts for the National Aeronautics and Space Administration.

La Botz, R. J.↗

NASA NTRS1982

A technology data base for the design of 500 to 5000-lb thrust class liquid rocket engines utilizing hydrogen and oxygen as propellants

This paper presents an overview of the results of experimental evaluations of candidate designs for igniters, injectors, and propellant-cooled thrust chambers applicable to restartable high-performance, high-reliability upper-stage engines and to pulsing-type reaction control engines (RCE). Injection element types best suited for liquid, gas, and liquid/gas phase propellant supply are identified. The resulting interactions between element type, combustion efficiency, and chamber wall heating are compared. The distinction between thrust chamber design requirements for upper stage vs RCE applications as measured by cycle life requirements is translated into design configurations consisting of all-film-cooled, all-regeneratively-cooled, and composites of the two cooling approaches. The validity of the design approaches is confirmed by data from engine durability testing involving over 90,000 starts and 9,000 thermal cycles on RCE-type designs and multiple long-duration burns (up to 2,000 sec) on regeneratively cooled upper-stage designs.

Schoenman, L.↗

NASA NTRS1984

The Shuttle Mission Simulator computer generated imagery

Equipment available in the primary training facility for the Space Transportation System (STS) flight crews includes the Fixed Base Simulator, the Motion Base Simulator, the Spacelab Simulator, and the Guidance and Navigation Simulator. The Shuttle Mission Simulator (SMS) consists of the Fixed Base Simulator and the Motion Base Simulator. The SMS utilizes four visual Computer Generated Image (CGI) systems. The Motion Base Simulator has a forward crew station with six-degrees of freedom motion simulation. Operation of the Spacelab Simulator is planned for the spring of 1983. The Guidance and Navigation Simulator went into operation in 1982. Aspects of orbital visual simulation are discussed, taking into account the earth scene, payload simulation, the generation and display of 1079 stars, the simulation of sun glare, and Reaction Control System jet firing plumes. Attention is also given to landing site visual simulation, and night launch and landing simulation.

Henderson, T. H.↗

NASA NTRS1982

An engine trade study for a supersonic STOVL fighter-attack aircraft, volume 1

The best main engine for an advanced STOVL aircraft flight demonstrator was studied. The STOVL aircraft uses ejectors powered by engine bypass flow together with vectored core exhaust to achieve vertical thrust capability. Bypass flow and core flow are exhausted through separate nozzles during wingborne flight. Six near term turbofan engines were examined for suitability for this aircraft concept. Fan pressure ratio, thrust split between bypass and core flow, and total thrust level were used to compare engines. One of the six candidate engines was selected for the flight demonstrator configuration. Propulsion related to this aircraft concept was studied. A preliminary candidate for the aircraft reaction control system for hover attitude control was selected. A mathematical model of transfer of bypass thrust from ejectors to aft directed nozzle during the transition to wingborne flight was developed. An equation to predict ejector secondary air flow rate and ram drag is derived. Additional topics discussed include: nozzle area control, ejector to engine inlet reingestion, bypass/core thrust split variation, and gyroscopic behavior during hover.

Beard, B. B.↗

NASA NTRS1985

The aerodynamic challenges of the design and development of the space shuttle orbiter

The major aerodynamic design challenge at the beginning of the United States Space Transportation System (STS) research and development phase was to design a vehicle that would fly as a spacecraft during early entry and as an aircraft during the final phase of entry. The design was further complicated because the envisioned vehicle was statically unstable during a portion of the aircraft mode of operation. The second challenge was the development of preflight aerodynamic predictions with an accuracy consistent with conducting a manned flight on the initial orbital flight. A brief history of the early contractual studies is presented highlighting the technical results and management decisions influencing the aerodynamic challenges. The configuration evolution and the development of preflight aerodynamic predictions will be reviewed. The results from the first four test flights shows excellent agreement with the preflight aerodynamic predictions over the majority of the flight regimes. The only regimes showing significant disagreement is confined primarily to early entry, where prediction of the basic vehicle trim and the influence of the reaction control system jets on the flow field were found to be deficient. Postflight results are analyzed to explain these prediction deficiencies.

Young, J. C.↗

NASA NTRS1985

Harrier

The Harrier Aircraft which has the ability to take off vertically and hover like a helicopter is discussed. This aircraft can also fly at high speeds like a conventional jet. It is this feature that separates the Harrier into a new class of airplanes. Two major characteristics of the Harrier aircraft are examined: (1) the hover ability; (2) the reaction control system which enables the Harrier to maneuver while in the hover mode.

Caffee, S.↗

NASA NTRS1984

Mechanism of colour discrimination by a bacterial sensory rhodopsin

A photosensitive protein resembling the visual pigments of invertebrates enables phototactic archaebacteria to distinguish color. This protein exists in two spectrally-distinct forms, one of which is a transient photoproduct of the other and each of which undergoes photochemical reactions controlling the cell's swimming behaviour. Activation of a single pigment molecule in the cell is sufficient to signal the flagellar motor. This signal-transduction mechanism makes evident a color-sensing capability inherent in the retinal/protein chromophore.

Spudich, J. L.↗

NASA NTRS1986

Lightweight Motorized Valve

Redesigned actuator assembly weighs 50 percent less. Isolator valve operated by ac motor instead of usual dc solenoid. Valve weighs only 3 lb (1.4 kg). New valve functions with either two-phase or three-phase power. Developed for isolating fluids in propellant tanks, manifolds, and interconnecting lines of Space Shuttle reaction control and orbital maneuvering subsystems, valve suited to applications in which leakage must be kept to minimum at high pressure differences - in petroleum and chemical processing.

Gonzalez, R.↗

NASA NTRS1984

Spacelab transitioning to Space Station

The availability of Shuttle and Spacelab makes it possible to fly a new class of scientific instruments. Thus, larger and heavier instruments can be employed, while the return of instruments after a mission provides an opportunity for instrument reconditioning and improvement in preparation for the next flight. In addition, the Shuttle provides a basic pointing capability with its Reaction Control System (RCS) which adjusts the attitude of the entire Shuttle in the desired direction. As part of Spacelab, the European Space Agency (ESA) developed an Instrument Pointing System (IPS). Early mission results are discussed, taking into account the first scientific payload carried on the Shuttle (OSTA-1), the OSS-1 payload, Spacelab 1, Spacelab 2, the Astro payload, Sunlab, and OSTA-3. Future missions are also considered, giving attention to the Solar Optical Telescope (SOT), the Shuttle Infrared Telescope Facility (SIRTF), and the Pinhole Occulter Facility (POF). It is pointed out that a number of the instruments being developed can be modified for operation on the Space Station.

Benson, R. H.↗

NASA NTRS1986

Line-of-sight performance improvement with reaction-wheel isolation

Design techniques used to isolate and damp vibrations from the reaction control wheels assembly (RCA) from the structural dynamics of the Hubble Space Telescope are described. The four RCAs can generate sufficient torque for large maneuvers and precision control during fine pointing. The RCAs are to operate continuously during observations and thereby pose the potential of inducing jitter. The image stability must be constrained to less than 0.007 arcsec rms per 24 hr and pointing accuracy must be 0.01 arcsec for 100 hr. Vibration-producing characteristics of the RCAs are identified, and test results are provided from measurements of the magnitudes of the associated disturbances. Design features and test results for the vibration isolators employed with the RCAs to effect viscous damping of RCA axial perturbations are presented. The dampers are expected to reduce jitter effects of RCA operation by a half.

Rodden, J. J.↗

NASA NTRS1986

Advanced orbital servicing capabilities development

The potential servicing requirements of the Space Station and associated free-flying platforms are identified and analyzed; the selected servicing tasks encompass orbital maneuver vehicle refueling, reaction-control subsystem thruster module replacement, and body-mounted radiator changeout. Attention is presently given to the commonality of all servicing activities, the definition of servicing interfaces, and the roles played by automation and robotics. The servicing concepts for each representative servicing task were selected on the basis of a weighed combination of seven factors: safety, productivity, relative cost, mission effectiveness, design flexibility and simplicity, and development status.

Olsen, Roy E.↗

NASA NTRS1987

Thermal ion perturbations observed in the vicinity of the Space Shuttle

Thermal ion characteristics in the vicinity of the Space Shuttle, derived from RF spectrometer measurements of the Plasma Diagnostic Package (PDP) flown aboard Spacelab 2, are discussed. During the Reaction Control System firings, short pulses of enhanced ion fluxes of NO(+), O2(+), and H2O(+) were detected in the near wake within and in near proximity to the open payload. During the release of the PDP as a free flying satellite, the spin modulation of the ion fluxes in the ion spectrometer indicated the presence of plasma streams of O(+) and H2O(+) which were separated in direction by as much as 77 deg. It is concluded that the presence of contaminant NO and O2(+) ions makes the near environment of the Shuttle an unsuitable place for obtaining accurate ambient ion concentration measurements.

Grebowsky, J. M.↗

NASA NTRS1987

Auxiliary propulsion technology for advanced Earth-to-orbit vehicles

The payload which can be delivered to orbit by advanced Earth-to-Orbit vehicles is significantly increased by advanced subsystem technology. Any weight which can be saved by advanced subsystem design can be converted to payload at Main Engine Cut Off (MECO) given the same launch vehicle performance. The auxiliary propulsion subsystem and the impetus for the current hydrogen/oxygen technology program is examined. A review of the auxiliary propulsion requirements of advanced Earth-to-Orbit (ETO) vehicles and their proposed missions is given first. Then the performance benefits of hydrogen/oxygen auxiliary propulsion are illustrated using current shuttle data. The proposed auxiliary propulsion subsystem implementation includes liquid hydrogen/liquid oxygen (LH2/LO2) primary Reaction Control System (RCS) engines and gaseous hydrogen/gaseous oxygen (GH2/GO2) vernier RCS engines. A distribution system for the liquid cryogens to the engines is outlined. The possibility of providing one dual-phase engine that can operate on either liquid or gaseous propellants is being explored, as well as the simultaneous firing of redundant primary RCS thrusters to provide Orbital Maneuvering System (OMS) level impulse. Scavenging of propellants from integral main engine tankage is proposed to utilize main engine tank residuals and to combine launch vehicle and subsystem reserves.

Schneider, Steven J.↗

NASA NTRS1988

Aeroassist flight experiment guidance Quiet Time

The science experiments for the Aeroassist Flight Experiment (AFE) will be greatly enhanced by taking measurements with no Reaction Control System (RCS) contamination just before perigee. Methods of modifying the AFE guidance to accomplish this are discussed. Several methods that could give up to 30 seconds of quiet time were investigated and the results of these guidance modifications shown. A 20 second quiet time is definitely possible and a 30 second quiet time may be possible if the guidance can be inactive past perigee. Some of the most significant being the criterion for determining if the mission is threatened. A limited follow-on test program is outlined.

Striepe, Scott A.↗