Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Experimental Durability Testing of 4H SiC JFET Integrated Circuit Technology at 727 Degrees Centigrade

We have reported SiC integrated circuits (ICs) with two levels of metal interconnect that have demonstrated prolonged operation for thousands of hours at their intended peak ambient operational temperature of 500 degrees Centigrade. However, it is recognized that testing of semiconductor microelectronics at temperatures above their designed operating envelope is vital to qualification. Towards this end, we previously reported operation of a 4H-SiC JFET IC ring oscillator on an initial fast thermal ramp test through 727 degrees Centigrade. However, this thermal ramp was not ended until a peak temperature of 880 degrees Centigrade (well beyond failure) was attained. Further experiments are necessary to better understand failure mechanisms and upper temperature limit of this extreme-temperature capable 4H-SiC IC technology.Here we report on additional experimental testing of custom-packaged 4H-SiC JFET IC devices at temperatures above 500 degrees Centigrade. In one test, the temperature was ramped and then held at 727 degrees Centigrade, and the devices were periodically measured until electrical failure was observed. A 4H-SiC JFET on this chip electrically functioned with little change for around 25 hours at 727 degrees Centigrade before rapid increases in device resistance caused failure. In a second test, devices from our next generation 4H-SiC JFET ICs were ramped up and then held at 700 degrees Centigrade (which is below the maximum deposition temperature of the dielectrics). Three ring oscillators functioned for 8 hours at this temperature before degradation. In a third experiment, an alternative die attach of gold paste and package lid was used, and logic circuit operation was demonstrated for 143.5 hours at 700 degrees Centigrade.

Silicon Carbide↗
NASA NTRS2018

Yearlong 500 C Operational Demonstration of Up-Scaled 4H-SiC JFET Integrated Circuits

This work describes recent progress in the design, processing, and testing of significantly up-scaled 500 C durable 4H-SiC junction field effect transistor (JFET) integrated circuit (IC) technology with two-level interconnect undergoing development at NASA Glenn Research Center. For the first time, stable electrical operation of semiconductor ICs for over one year at 500 C in air atmosphere is reported. These groundbreaking durability results were attained on two-level interconnect JFET demonstration ICs with 175 or more transistors on each chip. This corresponds to a more than 7-fold increase in 500 C-durable circuit complexity from the 24 transistor ring oscillator ICs reported at HiTEC 2016. These results advance the technology foundation for realizing long-term durable 500 C ICs with increased functional capability for combustion engine sensing and control, planetary exploration, deep-well drilling monitoring, and other harsh-environment applications.

Silicon carbides↗
NASA NTRSDate not supplied

Alternative Setup for Long-Duration Low-Duty-Cycle 600°C Ambient Testing of SiC Integrated Circuits

A scalable, compact oven testbed system for simultaneously evaluating a multitude of high temperature integrated circuits (ICs) for prolonged operating times of up to 600 °C has been prototyped. The new testbed system enables long-duration high temperature testing in sufficient statistical quantities consistent with standard aerospace electronics engineering standards. This setup is comprised of multiple compact ovens housing chips or packages mounted to ceramic circuit boards. Each oven is a compact 15.2 cm length by 15.2 cm width by 12.7 cm depth with a maximum 400 Watts of heating power. The custom-made silicon oxide ceramic heating block inside each oven is based on a 3D printed design adapted for the easy insertion of the IC device under test (DUT). This innovative design provides the quick insertion of ICs with or without a ceramic package into a 600 °C environment by utilizing a movable 11.43 cm long ceramic substrate with electrical traces extending from the oven hot zone to external standard plastic-based board connectors. Another key oven design feature is the minimization of the DUT exposure to electromagnetic interference (EMI) by utilizing a filtered DC power source to reduce heating element noise. Additionally, the ovens can be configured in a parallel arrangement allowing global data monitoring over a single industrial RS422 serial port. This feature is important for scaling up to test multiple ICs semi-simultaneously. A USB serial port is provided to independently control the operating parameters of each oven such as the oven target temperature and oven ramp rate. The oven temperature can reach up to 600 °C with a confirmed +/- 4 °C maximum deviation across the test zone region. The ramp rate can be programmed from 1 °C/minute up to 10 °C/minute. Furthermore, a programmable switchboard is used to interface with the DUT. This switchboard comprises a National Instruments Peripheral Component Interconnect eXtension for Instrumentation (NI PXI) system and a breakout board to send and receive power, analog or digital test signals. By using this unique oven testbed system, a variety of ICs can now be tested in parallel using the same test components configured for a diverse set of requirements.

DC Powered Oven↗
DOE OSTI2016

System and method for on demand, vanishing, high performance electronic systems

An integrated circuit system having an integrated circuit (IC) component which is able to have its functionality destroyed upon receiving a command signal. The system may involve a substrate with the IC component being supported on the substrate. A module may be disposed in proximity to the IC component. The module may have a cavity and a dissolving compound in a solid form disposed in the cavity. A heater component may be configured to heat the dissolving compound to a point of sublimation where the dissolving compound changes from a solid to a gaseous dissolving compound. A triggering mechanism may be used for initiating a dissolution process whereby the gaseous dissolving compound is allowed to attack the IC component and destroy a functionality of the IC component.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Detecting Payload Attacks on Programmable Logic Controllers (PLCs)

Programmable logic controllers (PLCs) play critical roles in industrial control systems (ICS). Providing hardware peripherals and firmware support for control programs (i.e., a PLC’s “payload”) written in languages such as ladder logic, PLCs directly receive sensor readings and control ICS physical processes. An attacker with access to PLC development software (e.g., by compromising an engineering workstation) can modify the payload program and cause severe physical damages to the ICS. To protect critical ICS infrastructure, we propose to model runtime behaviors of legitimate PLC payload program and use runtime behavior monitoring in PLC firmware to detect payload attacks. By monitoring the I/O access patterns, network access patterns, as well as payload program timing characteristics, our proposed firmware-level detection mechanism can detect abnormal runtime behaviors of malicious PLC payload. Using our proof-of-concept implementation, we evaluate the memory and execution time overhead of implementing our proposed method and find that it is feasible to incorporate our method into existing PLC firmware. In addition, our evaluation results show that a wide variety of payload attacks can be effectively detected by our proposed approach. The proposed firmware-level payload attack detection scheme complements existing bumpin- the-wire solutions (e.g., external temporal-logic-based model checkers) in that it can detect payload attacks that violate realtime requirements of ICS operations and does not require any additional apparatus.

42 ENGINEERING↗
DOE OSTI2019

Creating Cybersecurity Professionals of the Future

Cybersecurity is a growing public concern with more threats and vulnerabilities being discovered and exploited by adversaries each day. In particular, industrial control systems (ICS) are at a higher risk because their components were not designed with cybersecurity in mind. With increased risk to ICS, it is vital that the employees who work on the system are trained in cybersecurity best practices and the latest threats. Research has shown that there are currently no curriculum standards for an ICS cybersecurity professional, which may contribute to the issues faced during the hiring process. In fact, most individuals require extensive post-hire training before they can begin normal operations. The goal in cybersecurity is to become operationally resilient, which means in part that employees of an organization are trained to prevent and handle a cybersecurity incident. Therefore, the authors present a project that offers a solution to the education gap by creating a workforce pipeline for ICS cybersecurity professionals. The project is a virtual ecosystem for collaboration and transforming operational resilience (VECTOR). VECTOR incorporates many different efforts to increase operational resilience including the development of ICS cybersecurity curriculum and apprenticeships.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2015

New Limits on Intrinsic Charm from a QCD Global Analysis

We present a new global QCD analysis of parton distribution functions, allowing for possible intrinsic charm (IC) contributions in the nucleon inspired by recent model calculations on the light-front. The analysis makes use of the full range of available high-energy scattering data for Q2?1~GeV2 and W2?3.5~GeV2, including fixed-target proton and deuteron cross sections at lower energies that were excluded in previous global analyses. The expanded data set places more stringent constraints on the momentum carried by IC, with ?x?IC at most 0.5\% (corresponding to an IC normalization of ?1%) at the 4? level for ??2=1. We also critically assess the impact of older EMC measurements of Fc2 at large x, which favor a nonzero IC, but with very large ?2 values.

Hobbs, Timothy↗
DOE OSTI2020

Competing Interests and Creating Value - Balancing Durable and Enforceable Institutional Controls with Beneficial Reuse - 20320

US DOE LM has various real property interests at the 100 sites within its current portfolio, with an anticipated total of 127 sites within the next 5 years. Each site has its own narrative with respect to the real property assets. Since the regulatory time frame for long-term surveillance and maintenance activities at some sites can be in perpetuity, durable and effective instruments and documentation are necessary to support LM's unique mission as a federal land manager and steward. More than half of the sites currently in LM's inventory do not allow unrestricted use, and institutional controls (ICs) are required to limit human and environmental exposures to residual contamination. LM's Asset Management program balances protection of human health and the environment with a goal of optimizing its land portfolio through mitigation of risk, limiting liability, and creating value, whether tangible or intangible, in these types of assets. The IC layering strategy utilizes multiple types, restrictions, and legal authorities to protect human health and the environment. This layering strategy influences the transition of these properties into LM's portfolio to assess potential beneficial reuses. The LM's beneficial reuse program aims to repurpose former contaminated sites to restore the environment, protect the public health, revitalize communities, and spur economic growth. LM strives to create value in a perceived valueless asset and reevaluates and revisits the potential opportunities for these sites as long-term surveillance and maintenance activities are performed and objectives are achieved. Beneficial reuse also promotes protectiveness by ensuring activities are compatible with long-term maintenance and protection of public health and the environment as well as ensuring activities are environmentally sound by retaining good stewardship of natural resources. LM has recently revised both the Institutional Control Program Guidance and its Beneficial Reuse Management Plan to integrate the issues of land use with ICs, creating value in these impaired assets. This paper presents the following topics: (1) a general overview of LM's IC and beneficial reuse programs; (2) the unique aspects of each of these programs as a result of the multiple regulatory requirements and programs that affect LM sites; (3) case studies of LM sites to show examples of how LM created value while complying with the ICs and layering strategies; and (4) the most common challenges to beneficial reuses at LM sites and potential options for value creation in impaired assets. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Oil and Natural Gas Development near and beneath Uranium Tailings Cells and Other Remediated Sites - 20358

DOE LM is responsible for maintaining remedies at more than 50 remediated sites that require active long-term surveillance and maintenance (LTS and M). Institutional controls (ICs) were established to limit human and environmental exposures to residual contamination by controlling land use, restricting access to potential hazards, and making the public aware of potential dangers from the residual contamination. ICs for each site were developed based on current and foreseeable conditions; however, these controls should evolve to mitigate potential human health and other environmental risks from unanticipated changes in activities or site conditions. Activities conducted beyond the DOE long-term care boundaries by non-DOE parties may impact the effectiveness of ICs or even the long-term stability of disposal cells and groundwater remedies. Several sites that LM manages or that will transfer to LM for LTS and M are in active oil and gas production basins. The sites are associated with uranium ore milling or nuclear test sites and have been remediated or are in the process of remediation and have no ongoing DOE mission. Particularly since 2005, hydraulic fracturing ('fracking') combined with directional drilling has dramatically increased oil and natural gas (oil/gas) production in the United States, now making it the number one hydrocarbon-producing country. Fracking has allowed production from shale and other rocks of low natural permeability that were historically not considered viable oil/gas resources. Also, because wellbores can now be drilled as many as 5 kilometers or more horizontally, hydrocarbons can be recovered from zones without having access to the surface above them. Drilling activity near Rulison, Colorado, the location of an underground nuclear detonation managed by LM, has raised public concerns that remnant radioactivity in the detonation zone could migrate to producing wells and enter the natural gas distribution system. At sites like the Falls City, Texas, Disposal site, transitioned to LM with a split estate, increased production in the region has resulted in wellbores beneath the long-term care boundary of the site. While the DOE license for Falls City was approved by the NRC in 1997 without the acquisition of the subsurface rights, NRC has raised concerns on whether this activity impacts the integrity of the cell and/or groundwater remedies. In Wyoming, LM is anticipating receiving the license for the Bear Creek site and manages the Spook site, both locations of uranium mill tailings disposal cells. These Wyoming sites are in an active region of major oil and gas development. This change in surrounding land use will require LM to work collaboratively with NRC to address these concerns. At several DOE sites radioactive waste, and often intermixed nonradioactive constituents, is permanently isolated in engineered disposal cells. At other sites, residual contamination can be present in groundwater, blast cavities, and infinite amounts within soil. Areas targeted for oil and gas development at the Texas and Wyoming sites range from depths of 2440 to 3350 meters (8000-11000 feet) below ground surface. When most site remedies were designed, oil and gas development was not considered to be an issue within the site boundary. With the more recent uses of directional drilling, fracking, and associated wastewater injections, the evaluative criteria for incoming sites and ICs for managing long-term protectiveness and regulatory compliance are changing. Although DOE surface ownership was previously thought to be a robust IC to prevent surface and subsurface development, particularly at disposal sites, that may no longer be the case. Whereas the subsurface development at Texas and Wyoming sites is currently occurring at thousands of meters beneath the surface, shallower and direct onsite development would be more of a concern for LM. The energy introduced when a well is hydraulically fractured causes microseismic events (magnitude -2 to 1.0) as the fractures propagate but does not directly cause seismic events (earthquakes) of sufficient magnitude to damage surface structures. Additionally, the extent of the hydraulic fractures is limited to the targeted depths, which are far below the surface. However, earthquakes of sufficient magnitude to damage surface structures have been attributed to the injection of wastewater into disposal wells. States that have experienced these effects have enacted regulations that limit the rate and pressures that wastewater can be injected into disposal wells. Items LM may consider are the need for monitoring the volume of water injected into nearby disposal wells and possibly installing seismic stations at sites most susceptible to damage. While the need to demonstrate that no impact from oil and gas extraction activities on a site groundwater remedy or disposal cells will vary from site to site, LM is assessing risk criteria for this activity. Though LM has not experienced an issue yet at a uranium tailings disposal site, it cannot assume that there will be none, and must address NRC concerns. LM is building on past experiences at other sites and beginning to form new processes with the hope that these concepts can be applied for other future sites. (authors)

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2013

Advanced Platform for Development and Evaluation of Grid Interconnection Systems Using Hardware-in-the-Loop (Poster)

This poster describes a Grid Interconnection System Evaluator (GISE) that leverages hardware-in-the-loop (HIL) simulation techniques to rapidly evaluate the grid interconnection standard conformance of an ICS according to the procedures in IEEE Std 1547.1TM. The architecture and test sequencing of this evaluation tool, along with a set of representative ICS test results from three different photovoltaic (PV) inverters, are presented. The GISE adds to the National Renewable Energy Laboratory's (NREL) evaluation platform that now allows for rapid development of ICS control algorithms using controller HIL (CHIL) techniques, the ability to test the dc input characteristics of PV-based ICSs through the use of a PV simulator capable of simulating real-world dynamics using power HIL (PHIL), and evaluation of ICS grid interconnection conformance.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2015

An improved hindcast approach for evaluation and diagnosis of physical processes in global climate models

Here, we present an improved procedure of generating initial conditions (ICs) for climate model hindcast experiments with specified sea surface temperature and sea ice. The motivation is to minimize errors in the ICs and lead to a better evaluation of atmospheric parameterizations' performance in the hindcast mode. We apply state variables (horizontal velocities, temperature and specific humidity) from the operational analysis/reanalysis for the atmospheric initial states. Without a data assimilation system, we apply a two-step process to obtain other necessary variables to initialize both the atmospheric (e.g., aerosols and clouds) and land models (e.g., soil moisture). First, we nudge only the model horizontal velocities towards operational analysis/reanalysis values, given a 6-hour relaxation time scale, to obtain all necessary variables. Compared to the original strategy in which horizontal velocities, temperature and specific humidity are nudged, the revised approach produces a better representation of initial aerosols and cloud fields which are more consistent and closer to observations and model's preferred climatology. Second, we obtain land ICs from an offline land model simulation forced with observed precipitation, winds, and surface fluxes. This approach produces more realistic soil moisture in the land ICs. With this refined procedure, the simulated precipitation, clouds, radiation, and surface air temperature over land are improved in the Day 2 mean hindcasts. Following this procedure, we propose a “Core” integration suite which provides an easily repeatable test allowing model developers to rapidly assess the impacts of various parameterization changes on the fidelity of modelled cloud-associated processes relative to observations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Synergistic Effects of Side-Chain Engineering and Fluorination on Small Molecule Acceptors to Simultaneously Broaden Spectral Response and Minimize Voltage Loss for 13.8% Efficiency Organic Solar Cells

In this paper, three small molecule (SM)-acceptors (POIT-IC, POIT-IC2F, and POIT-IC4F) are developed by combining the side-chain engineering located on the sp 3 -hybridized carbon atoms of the fused-ring core and the fluorination of end groups. From ITIC to POIT-IC, POIT-IC2F, and then to POIT-IC4F, the SM-acceptors show gradually broadened absorption spectra, increased maximum extinction coefficient, crystallinity, and electron mobilities due to the synergistic effects of side-chain engineering and fluorination. Compared with nonfluorinated ITIC and POIT-IC, as fluorination broadens the molecular spectra, POIT-IC2F and POIT-IC4F with alkoxyphenyl side chains show less decreased LUMO levels than IT-IC2F and IT-IC4F with alkylphenyl side chains, which are conducive to both higher V oc and J sc for organic solar cells (OSCs). Combined with polymer donor PM6, the POIT-IC4F-based OSCs achieve a device efficiency of up to 13.8% with a high V oc of 0.91 V and J sc of 20.9 mA cm –2 , which are significantly higher than that of the control OSCs based on ITIC (8.9%), POIT-IC (10.1%), or IT-IC4F (12.2%). An efficiency of 13.8% is one of the highest PCEs reported for the annealing-free OSCs. Our results show that the synergistic effects of side-chain engineering and fluorination on SM-acceptor can simultaneously broaden spectral response and minimize voltage loss of OSCs and ultimately achieve high device efficiency.

14 SOLAR ENERGY↗
DOE OSTI2019

Comparative α-glucosidase and α-amylase inhibition studies of rhodanine–pyrazole conjugates and their simple rhodanine analogues

Novel rhodanine–pyrazole conjugates (6a–i) and their simple rhodanine analogues (8a–e) were prepared and comparatively screened for their antidiabetic activities against enzymatic targets, α-glucosidase and α-amylase. As expected, the molecular hybrids exhibited significantly greater inhibitory activity against α-glucosidase (IC{sub 50} = 2.259 × 10{sup −6}–1.160 × 10{sup −4} mol/L), relative to their simple rhodanine counterparts (IC{sub 50} = 3.056 × 10{sup −4}–9.494 × 10{sup −4} mol/L). Amongst the screened derivatives compounds 6a and 6f displayed a 3-fold and 42-fold greater potency against α-glucosidase (IC{sub 50} = 2.854 × 10{sup −5} and 2.259 × 10{sup −6}mol/L, respectively) compared to the standard drug, acarbose. The designed molecular conjugates displayed an improved binding affinity toward α-glucosidase than α-amylase. Compound 6d was identified as the most potent inhibitor of α-amylase (IC{sub 50} = 6.377 × 10{sup −5} mol/L) with a 1.5-fold greater inhibitory activity than acarbose. Structural assessment of the molecules revealed that electron withdrawing (Cl) and electron donating (OCH{sub 3}) groups at the ortho-position played a significant role in the inhibitory activity. Molecular docking studies of the molecular conjugates and simple rhodanine analogues in the active site of α-glucosidase were performed to describe and highlight the putative binding interactions attributing to the selective inhibition. The identification of these novel rhodanine–pyrazole molecular hybrids forms part of a potential treatment in the management of diabetes.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2019

Xenicanes attenuate pro-inflammatory 5-lipoxygenase: Prospective natural anti-inflammatory leads from intertidal brown seaweed Padina tetrastromatica

Two previously unreported xenicane class of novaxenicin-type xenicin diterpenoids (1–2) bearing cyclonona[d]furo [2,3-b]pyrandiol and three xeniolide-type diterpenoids with unprecedented octahydrocyclonona[c]pyran-3(1H)-one backbones (3–5) were separated from the organic extract of the intertidal seaweed Padina tetrastomatica (family Dictyotaceae), collected from southern India. The compounds were deduced to bear a xenicane moiety with a 2-oxabicyclo[7.4.0]tridecane cyclic system. The structures of these specialized metabolites were attributed based on the extensive nuclear magnetic resonance spectral analyses, and comparison of related compounds. Xeniolide-type diterpenes (3–5) registered significantly greater attenuation potential against pro-inflammatory 5-lipoxygenase (IC{sub 50} ~ 2.04 mM) than that exhibited by non-steroidal anti-inflammatory drug ibuprofen (IC{sub 50} 4.50 mM, P< 0.05). The xeniolide derivative octahydro-1,7-dihydroxy-4-(4{sup 1}-hydroxy-4{sup 2}-methylpropyl)-6-(6{sup 1}-hydroxy-6{sup 2}-propenyl)-10-methyl-cyclonona[c]pyran-3(1H)-one (5) exhibited comparable antioxidant activity (DPPH IC{sub 50} 1.73 mM) along with standard antioxidative agent α-tocopherol (IC{sub 50} < 2 mM). In silico molecular modelling studies were performed to designate the 5-lipoxygenase inhibitory mechanism of the xenicanes, and the comparison of docking parameters suggested that the xeniolide derivative 5 exhibited least binding energy of −11.56 kcal mol{sup −1}, and that was corroborated with its greater inhibition potential against the pro-inflammatory enzyme. These results demonstrated that the xeniolide-type diterpenoids with previously unreported δ-lactone cyclononane framework might constitute promising anti-inflammatory leads with pro-inflammatory 5-lipoxygenase enzyme inhibitory activities.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Prioritizing the selection of CMIP6 model ensemble members for downscaling projections of CONUS temperature and precipitation

Given the mismatch between the large volume of data archived for the sixth phase of the Coupled Model Intercomparison Project (CMIP6) and limited personnel and computational resources for downscaling, only a small fraction of the CMIP6 archive can be downscaled. In this work, we develop an approach to robustly sample projected hydroclimate states in CMIP6 for downscaling to test whether the selection of a single initial condition (IC) ensemble member from each CMIP6 model is sufficient to span the range of modeled hydroclimate over the conterminous United States (CONUS) and CONUS sub-regions. We calculate the pattern-centered root mean square difference of IC ensemble member anomalies relative to each model’s historical climatology for shared socioeconomic pathway (SSP) projections over 30-year time periods and compare the ratio of inter-model to intra-model variability for this metric. Regardless of SSP, inter-model variability is generally much greater than intra-model variability at the scales of the CONUS as a whole, as well as for most CONUS sub-regions. However, for some variables and scenarios, inter- and intra-model variability are similar at sub-CONUS scales, indicating that selecting a single IC ensemble member per model may be sufficient to sample the range of projected hydroclimate states in the 21st Century across CONUS, but for specific regions and variables, more careful selection of ensemble members may be necessary. Regionally resolved Taylor diagrams identify where more IC ensemble member downscaling efforts should be focused if resources are available to do so. Our results suggest that, with parsimonious sampling, the requisite computational expense of downscaling temperature and precipitation fields over the CONUS for subsequent CMIP activities may increase only marginally despite the great increase in data volumes with each successive CMIP phase.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

Low toxic and high soluble camptothecin derivative 2–47 effectively induces apoptosis of tumor cells in vitro

The cytotoxic activity of camptothecin derivatives is so high that these compounds need to be further modified before their successful application as anti-cancer agents clinically. In this study, we reported the synthesis and biological evaluation of a novel camptothecin derivative called compound 2–47. The changes in structure did not reduce its activity to inhibit DNA topoisomerase I. Compound 2–47 induced apoptosis of many tumor cells including leukemia cells K562, Jurkat, HL-60, breast cancer cell BT-549, colon cancer cell HT-29 and liver cancer cell HepG2 with a half maximal inhibitory concentration (IC{sub 50}) of 2- to 3-fold lower than HCPT as a control. In particular, 2–47 inhibited the proliferation of Jurkat cells with an IC{sub 50} of as low as 40 nM. By making use of Jurkat cell as a model, following treatment of Jurkat cells, compound 2–47 activated caspase-3 and PARP, resulting in a decreased Bcl-2/Bax ratio. These data showed that compound 2–47 induces Jurkat cell death through the mitochondrial apoptotic pathway. In addition, compound 2–47 showed a decreased cytotoxic activity against normal cells and an improved solubility in low-polar solvent. For example, compound 2–47 solutes in CHCl{sub 3} 130-fold higher than HCPT. Taken together, our data demonstrated that camptothecin derivative 2–47 notably inhibits the tumor cell proliferation through mitochondrial-mediated apoptosis in vitro. - Highlights: • Compound 2–47 showed a wide inhibitory effect on the tested tumor cell lines with an IC{sub 50} of 3 times lower than that of HCPT in general. • Compound 2–47 inhibited the proliferation of the human leukemia cell Jurkat at an IC{sub 50} of as low as 40 nM. • As compared to HCPT, compound 2–47 showed much reduced cytotoxicity on normal human cells. • As compared to others, compound 2–47 showed a hundreds-fold higher solubility in non-polar organic solution.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2017

Azomethines, isoxazole, N-substituted pyrazoles and pyrimidine containing curcumin derivatives: Urease inhibition and molecular modeling studies

Curcumin has shown large number of pharmacological properties against different phenotypes of various disease models. Different synthetic routes have been employed to develop its various derivatives for diverse biological functions. In this study, curcumin derived azomethine, isoxazole, pyrimidines and N-substituted pyrazoles were synthesized to investigate their urease enzyme inhibition. The structures of newly synthesized compounds were described by IR, MS, {sup 1}H NMR and {sup 13}C NMR spectral data. Urease enzyme inhibition was evaluated through in vitro assays in which compound 8b was found to be the most potent (IC{sub 50} = 2.44 ± 0.07 μM) among the tested compounds. The compounds with diazine ring system except the 4d showed better urease inhibition (IC{sub 50} = 11.43 ± 0.21–19.63 ± 0.28 μM) than the standard urease inhibitor thiourea (IC{sub 50} = 22.61 ± 0.23 μM). Similarly enzyme kinetics data revealed that compounds 3c-3e and 8b were competitive inhibitors with Ki values of 20.0, 19.87, 20.23 and 19.11 μM respectively while the compounds 4b, 4c and 4e were mixed type of inhibitors with Ki values 6.72, 19.69 and 6.72 μM respectively. Molecular docking studies were also performed to identify the plausible binding modes of the most active compounds. - Highlights: • Azomethines, Isoxazole, N-substituted pyrazoles and pyrimidine with curcumin scaffold were synthesized. • Anti-urease studies of target compounds were performed. • Molecular modeling of most active compounds at active site of urease. • Thiourea conjugated with curcumin showed excellent urease inhibition with IC{sub 50} = 2.44 ± 0.07 μM.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Improved sensing of vertical velocity for vertical position control using loop voltage signals on EAST

Vertical position control of shaped plasma is critical for all elongated tokamaks to achieve safe and stable plasma discharge. In EAST, the in-vessel coil (IC) is employed for fast control of plasma vertical motion which power supply capabilities limits the controllability of vertical instability. Moreover, adequate signal-to-noise ratio of vertical position measurement can also realize an improvement in vertical control. In EAST, plasma vertical position Z p is produced nearly by all integrated magnetics, fast Z error signal is obtained by filtering from Zp. Then this fast Z error and its derivative term (dz/dt) are controlled by IC with a separate PD controller. Yet, it has a low signal-to-noise ratio which limits the gains that can be used successfully in the PD control loops. To provide less noisy dz/dt signal, the successful use of multiple up/down loop voltage pairs instead of derivative of z derived from magnetic probe signals will be discussed. Experiment show that even a single pair of loop voltage signal has better signal-to-noise ratio than differentiation of Z p . In addition, flux loop pickup signals from the IC current are also measured with series of positive and negative IC current pulses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗