Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solution assembly”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Interface-modulated kinetic differentials in electron and hole transfer rates as a key design principle for redox photocatalysis by Sb2VO5/QD heterostructures

The efficient conversion of solar energy to chemical energy represents a critical bottleneck to the energy transition. Photocatalytic splitting of water to generate solar fuels is a promising solution. Semiconductor quantum dots (QDs) are prime candidates for light-harvesting components of photocatalytic heterostructures, given their size-dependent photophysical properties and band-edge energies. A promising series of heterostructured photocatalysts interface QDs with transition-metal oxides which embed midgap electronic states derived from the stereochemically active electron lone pairs of p-block cations. Here, we examine the thermodynamic driving forces and dynamics of charge separation in Sb2VO5/CdSe QD heterostructures, wherein a high density of Sb 5s2-derived midgap states are prospective acceptors for photogenerated holes. Hard-x-ray valence band photoemission spectroscopy measurements of Sb2VO5/CdSe QD heterostructures were used to deduce thermodynamic driving forces for charge separation. Interfacial charge transfer dynamics in the heterostructures were examined as a function of the mode of interfacial connectivity, contrasting heterostructures with direct interfaces assembled by successive ion layer adsorption and reaction (SILAR) and interfaces comprising molecular bridges assembled by linker-assisted assembly (LAA). Transient absorption spectroscopy measurements indicate ultrafast (<2 ps) electron and hole transfer in SILAR-derived heterostructures, whereas LAA-derived heterostructures show orders of magnitude differentials in the kinetics of hole (<100 ps) and electron (∼1 ns) transfer. The interface-modulated kinetic differentials in electron and hole transfer rates underpin the more effective charge separation, reduced charge recombination, and greater photocatalytic efficiency observed for the LAA-derived Sb2VO5/CdSe QD heterostructures.

Chemistry↗
DOE OSTI2024

T-Type Modular DC Circuit Breaker (T-Breaker) for Future DC Networks

The developed T-Type Modular DC Circuit Breaker (T-Breaker) technology offers an all-in-one solution to challenges in DC networks. This includes swift fault detection and protection, power transient stability, and power quality improvement, achieved through the utilization of wide bandgap (WBG) power semiconductors and energy storage devices. The T-Breaker not only facilitates rapid fault current detection and interruption but also implements fault current limiting through active insertion of storage devices or by operating WBG devices in the saturation region. Additionally, with the assistance of energy storage devices, potential overvoltage issues on power devices induced by control signal misalignment can be mitigated. The T-Breaker can be regulated to perform shunt current injection/absorption using the vertical arm and series voltage insertion via the horizontal arm, thereby enhancing DC system stability during voltage or load power fluctuation transients. The OSU team and Raytheon team actively worked together on designing, fabricating, assembling, and testing of two T-Breaker prototypes. The first prototype is rated at 1 kV, 500 A with half-bridge (unipolar) structure to validate the T-Breaker concept. The second prototype is rated at 20 kV, 50 A with full-bridge (bipolar) topology which can reach an efficiency of 99.977%, realize a power density of 60.2 MW/m3, and eliminate the 500-A fault current with a fault response time of around 20 µs. The prototypes show great feasibility of adopting this technology in multiple applications including electrified aircraft, super charging stations, data centers, etc.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

Barium ion sensing with IPG K + molecular probes

Fluorophores covalently bound to azacrown ether ionophores can be assembled into sensitive turn-on chemosensors. The size specificity and electron-rich nature of the ionophore's binding domain contribute to both selectivity and strong turn-on fluorescence sensing by various mechanisms when properly constructed. Aza-18-crown-6 ethers are quite selective for binding to K + and Ba 2+ , yet the more electron-withdrawing dicationic nature of barium imposes a larger electronic effect on turn-on fluorescent sensors. Barium chemosensors can be important for measuring soluble Ba 2+ in drinking water and have gained recent attention for their potential to enhance the detection of rare events in xenon decay. Here we quantify the capability of three chemosensors, marketed for biologically useful K + sensing, as effective probes for Ba 2+ ions. Here, we present measurements from bulk spectrofluorometry to characterize the system in aqueous solutions and demonstrate the usefulness of these species for low-background single-ion fluorescence microscopy, revealing new candidates for Ba 2+ sensing.

Miller, R. L. [Department of Chemistry and Biochem↗
DOE OSTI2022

Efficient data acquisition and training of collisional-radiative model artificial neural network surrogates through adaptive parameter space sampling

Abstract Effective plasma transport modeling of magnetically confined fusion devices relies on having an accurate understanding of the ion composition and radiative power losses of the plasma. Generally, these quantities can be obtained from solutions of a collisional-radiative (CR) model at each time step within a plasma transport simulation. However, even compact, approximate CR models can be computationally onerous to evaluate, and in-situ evaluation of these models within a larger plasma transport code can lead to a rigid bottleneck. As a way to bypass this bottleneck, we propose deploying artificial neural network (ANN) surrogates to allow rapid evaluation of the necessary plasma quantities. However, one issue with training an accurate ANN surrogate is the reliance on a sufficiently large and representative training and validation data set, which can be time-consuming to generate. In this work we explore a data-driven active learning and training routine to allow autonomous adaptive sampling of the problem parameter space to ensure a sufficiently large and meaningful set of training data is assembled for the network training. As a result, we can demonstrate approximately order-of-magnitude savings in required training data samples to produce an accurate surrogate.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Creating Favorable Pt/Co Interfaces via a Two‐Step Approach for Constructing Highly Durable PtCo Intermetallic Fuel Cell Catalysts

Structurally ordered PtCo intermetallics are one of the most promising oxygen-reduction catalysts in proton exchange membrane fuel cells (PEMFCs) due to their intrinsically improved catalytic activity and stability relative to PtCo solid-solution alloys. However, increasing the heating temperature to achieve a desirable high degree of ordering results in severe particle agglomeration and low mass activity and stability. Herein, a two-step synthesis approach is developed to create an L1 2 -Pt 3 Co intermetallic structure with an increased ordering degree and well-dispersed ultrafine particles. The first step of the synthesis yields ultrafine Pt nanoparticles that are well-dispersed on the ZIF-8-derived carbon support. The second adsorption step enables us to fine-tune the Pt and Co interfaces, assisted by optimal amino acids, to establish a favorable Co-rich environment around fine Pt nanoparticles, facilitating Co diffusion into the Pt crystalline under mild thermal conditions (<800 °C). In conclusion, this two-step ordered L1 2 -Pt 3 Co catalyst is systematically evaluated using membrane electrode assemblies under heavy-duty vehicle (HDV) conditions and demonstrated exceptional performance and durability, retaining 1.35 A cm -2 only a 7% loss in current density at 0.7 V after an extensive accelerated stress test of 150,000 voltage cycles.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2020

Experimental measurements of fuel and water crossover in an active DMFC

This work measured polarization curves as well as the high-frequency resistance of active direct methanol fuel cell (DMFC) operates at around 80 °C with active controls of temperature, methanol concentration, airflow rate, and relative humidity. The relative humidity of the air did not have noticeable impacts on the fuel cell unless the operating temperature was near the evaporation temperature of water (100 °C). The hydrophobic water management layer (WML) between the membrane electrode assembly (MEA) and cathode air channel increases the mass transfer resistance and improves the water retention in MEA. Adding a WML increased the peak power density, decreased the ohmic resistance, and improved the fuel efficiency of the fuel cell, especially when it operated near 100 °C. This study also quantitatively measured methanol and water crossover as well as the fuel efficiency at different operating currents. The fuel efficiency increased significantly with the increase of the current density. Using a hydrophobic fuel management layer (FML) between the anode fuel channel and MEA reduced the fuel and water crossover rates and increased the ohmic resistance due to the decrease of the water content of the Nafion membrane. The FML improved fuel efficiency by reducing the methanol crossover. The combination of the FML and WML enabled the steady operation of DMFC using highly concentrated methanol solutions (up to 75 wt%).

08 HYDROGEN↗
DOE OSTI2022

Effect of charge and anisotropic diffusivity on ion exchange kinetics in nuclear waste form materials

Motifs of radionuclide absorption particles (absorbers or fillers) for the nuclear waste treatment usually have crystal structures with nano-sized tunnels for fast ion diffusion. On the other hand, the accumulation of ions generates an electric field which affects the ion diffusion. Therefore, the strong anisotropic kinetic properties and the electric field affect ion exchange kinetics, especially in an assembly of these particles which may block the fast diffusion tunnels for each other. In this work, we developed a mesoscale model to describe the effect of anisotropic kinetic properties and electric field on ion exchange kinetics. With the model we simulated the effect of anisotropic diffusivity, electrochemical potential, particle morphology, size and aggregation on ion exchange kinetics during batch experiments. Here, tt is found that 1) ion exchange results in charge accumulation inside the particle because different ions have different diffusivities and different diffusion driving forces. The electric neutrality is not preserved; 2) the electric field speeds up the slower diffusion ions (either uptake or release) and slows down the faster diffusion ions to reduce charge accumulation and maintains charge neutrality; 3) the ion exchange becomes very slow at the later stages because a) diffusion driving force (electrochemical gradient, Cs + concentration in the solution and Na + inside the particle) continuously decreases, as observed in batch experiments; and b) the diffusivity decreases due to the Cs + concentration dependence of ion diffusivity. This can explain the observed experimental phenomena that the radionuclide capacity usually cannot be reached; 4) for needle-like particle and their clusters, both surface area and diffusion distance along the direction with the fastest diffusivities have significant impact on the ion exchange kinetics.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Simultaneous determination of electrical conductivity and thickness of nonmagnetic metallic foils using two-sided multifrequency eddy current techniques

Here, in this paper, we describe a simple method for performing multifrequency eddy current characterization of free-standing uniform-thickness metallic foils using a forked inductive coil arrangement. The method involves measuring the mutual inductance between two coils when a foil is present between the coils, and when it is not present; the ratio of these mutual inductances is compared with an analytical solution, and foil conductivity, thickness, and sheet resistance are simultaneously estimated using numerical inversion and least-squares fitting. This method was used to characterize 34 non-ferrous metallic samples with thicknesses between 50 and 640 μm and with conductivities between 0.8 × 10 7 and 5.8 × 10 7 S/m. The estimated thicknesses from eddy current characterization agreed well with those measured using confocal optical techniques; the two approaches agreed to within 1 μm for samples that were thinner than 200 μm, and to within 0.5% for samples that had a thickness of 200 μm or greater. The estimated conductivities from eddy current characterization were in close agreement with expected values, given knowledge of the materials used. A particular strength of this approach is that the instrumentation needed is broadly available in research and development laboratories and the associated fixturing is easy to manufacture and assemble. A calibration procedure is described that can be used to reduce errors from geometric uncertainties. This calibration requires a sample that has only a known conductivity or thickness; both do not need to be known. The method described herein is likely extensible to conductivities and thickness well outside the ranges measured as part of this work.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Interconnected cathode-electrolyte double-layer enabling continuous Li-ion conduction throughout solid-state Li-S battery

All-solid-state lithium (Li) batteries with high energy density are a promising solution for the next-generation energy storage systems in large-scale devices. To simultaneously overcome the challenges of poor ionic conduction of solid electrolytes and shuttling of active materials, here we introduce a functional electrolyte-cathode bilayer framework with interconnected LLAZO channels from the electrolyte into the cathode for advanced solid-state Li-S batteries. Differing from the traditional solid-state batteries with separated layer compositions, the introduced bilayer framework provides ultrafast and continuous ion/electron conduction. Instead of transferring Li+ across the polymer and garnet phases which involve huge interfacial resistance, Li+ is directly conducted through the LLAZO channels created continuously from the cathode layer to the solid electrolyte layer, significantly shortening the diffusion distance and facilitating the redox reaction of sulfur and sulfides. A stable cycle life is demonstrated in the prototype Li-S solid-state batteries assembled with the introduced LLAZO-LLAZO@CNF interconnected bilayer framework. High capacity is obtained at room temperature, indicating the superior electrochemical properties of the bilayer framework that result from the unique design of the interconnected LLAZO garnet phase.

25 ENERGY STORAGE↗
DOE OSTI2025

The [M 6 (S 2 C 2 Ph 2 ) 6 ] (M = Ni, Pd, Pt) Series: Multielectron Reservoirs That Sustain Ligand-Based Oxidations and Metal-Based Reductions

A complete [M 6 (S 2 C 2 R 2 ) 6 ] series (M = Ni (1), Pd (2), Pt (3); R = Ph), the rarest variety among homoleptic dithiolene transition-metal compounds, has been prepared by reaction between [M(S 2 C 2 Ph 2 ) 2 ] and a M 0 source. The platinum member of this set is the first of its type. Diffraction-quality crystals, grown with high reproducibility by evaporation from PhNO 2 solutions, reveal fully reduced [Ph 2 C 2 S 2 ] 2– dianions and an octahedral M 6 core that is reduced to C 2 symmetry by the fusion of a mononuclear D 2h [M(S 2 C 2 Ph 2 ) 2 ] fragment upon a C 4 -symmetric base. The [Ni 6 (S 2 C 2 Ph 2 ) 2 ] 1– monoanion, prepared by Cp* 2 Co reduction, shows only modest structural differences from its neutral counterpart. In CH 2 Cl 2 , 1 and 2 can undergo two reductions and an oxidation, while 3 sustains two reductions and two oxidations. In benzonitrile, 1 sustains three reversible oxidations at potentials that are shifted appreciably to less positive values. The cathodic processes are shown by density functional theory (DFT) calculations to involve an MO largely of metal–sulfur composition that has contributions throughout the C 4 -symmetric pentametallic base of the assembly, while the oxidations are largely ligand-based and confined to the monometallic [M(S 2 C 2 Ph 2 ) 2 ] cap. The absorption spectra are marked by multiple overlapping bands that produce a continuous, tapering absorption profile of unresolved shoulders and swells.

Ligands↗
DOE OSTI2021

Ligand-Free Processable Perovskite Semiconductor Ink

We report traditional covalent semiconductors require complex processing methods for device fabrication due to their high cohesive energies. Here, we develop a stable, ligand-free perovskite semiconductor ink that can be used to make patterned semiconductor-based optoelectronics in one step. The perovskite ink is formed via the dissolution of crystals of vacancy-ordered double perovskite Cs 2 TeX 6 (X = Cl - , Br - , I - ) in polar aprotic solvents, leading to the stabilization of isolated [TeX 6 ] 2- octahedral anions and free Cs + cations without the presence of ligands. The stabilization of the fundamental perovskite ionic octahedral building blocks in solution creates multifunctional inks with the ability to reversibly transform between the liquid ink and the solid-state perovskite crystalline system in air within minutes. These easily processable inks can be patterned onto various materials via dropcasting, spraying or painting, and stamping, highlighting the crucial role of solvated octahedral complexes toward the rapid formation of phase-pure perovskite structures in ambient conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

De novo design of protein structure and function with RFdiffusion

Abstract There has been considerable recent progress in designing new proteins using deep-learning methods 1–9 . Despite this progress, a general deep-learning framework for protein design that enables solution of a wide range of design challenges, including de novo binder design and design of higher-order symmetric architectures, has yet to be described. Diffusion models 10,11 have had considerable success in image and language generative modelling but limited success when applied to protein modelling, probably due to the complexity of protein backbone geometry and sequence–structure relationships. Here we show that by fine-tuning the RoseTTAFold structure prediction network on protein structure denoising tasks, we obtain a generative model of protein backbones that achieves outstanding performance on unconditional and topology-constrained protein monomer design, protein binder design, symmetric oligomer design, enzyme active site scaffolding and symmetric motif scaffolding for therapeutic and metal-binding protein design. We demonstrate the power and generality of the method, called RoseTTAFold diffusion (RFdiffusion), by experimentally characterizing the structures and functions of hundreds of designed symmetric assemblies, metal-binding proteins and protein binders. The accuracy of RFdiffusion is confirmed by the cryogenic electron microscopy structure of a designed binder in complex with influenza haemagglutinin that is nearly identical to the design model. In a manner analogous to networks that produce images from user-specified inputs, RFdiffusion enables the design of diverse functional proteins from simple molecular specifications.

Science & Technology - Other Topics↗
DOE OSTI2019

Manipulating nanoscale structure to control functionality in printed organic photovoltaic, transistor and bioelectronic devices

Printed electronics is simultaneously one of the most intensely studied emerging research areas in science and technology and one of the fastest growing commercial markets in the world today. For the past decade the potential for organic electronic (OE) materials to revolutionize this printed electronics space has been widely promoted. Such conviction in the potential of these carbon-based semiconducting materials arises from their ability to be dissolved in solution, and thus the exciting possibility of simply printing a range of multifunctional devices onto flexible substrates at high speeds for very low cost using standard roll-to-roll printing techniques. However, the transition from promising laboratory innovations to large scale prototypes requires precise control of nanoscale material and device structure across large areas during printing fabrication. Maintaining this nanoscale material control during printing presents a significant new challenge that demands the coupling of OE materials and devices with clever nanoscience fabrication approaches that are adapted to the limited thermodynamic levers available. In this review we present an update on the strategies and capabilities that are required in order to manipulate the nanoscale structure of large area printed organic photovoltaic (OPV), transistor and bioelectronics devices in order to control their device functionality. This discussion covers a range of efforts to manipulate the electroactive ink materials and their nanostructured assembly into devices, and also device processing strategies to tune the nanoscale material properties and assembly routes through printing fabrication. The review finishes by highlighting progress in printed OE devices that provide a feedback loop between laboratory nanoscience innovations and their feasibility in adapting to large scale printing fabrication. The ability to control material properties on the nanoscale whilst simultaneously printing functional devices on the square metre scale is prompting innovative developments in the targeted nanoscience required for OPV, transistor and biofunctional devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Swelling-Induced Symmetry Breaking: A Versatile Approach to the Scalable Production of Colloidal Particles with a Janus Structure

Janus particles are widely sought for applications related to colloidal assembly, stabilization of emulsions, and development of active colloids, among others. Here we report a versatile route to the fabrication of well-controlled Janus particles by simply breaking the symmetry of spherical particles with swelling. When a polystyrene (PS) sphere covered by a rigid shell made of silica or polydopamine is exposed to a good solvent for PS, a gradually increased pressure will be created inside the shell. If the pressure becomes high enough to poke a hole in the shell, the spherical symmetry will break while pushing out the swollen PS through the opening to generate a Janus particle comprised of two distinct components. One of the components is made of PS and its size is controlled by the extent of swelling. The other component is comprised of the rigid shell and remaining PS, with its overall diameter determined by the original PS sphere and the rigid shell. This solution-based route holds promises for the scalable production of complex Janus particles with a variety of compositions and in large quantities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Seagrass genomes reveal ancient polyploidy and adaptations to the marine environment

Here, we present chromosome-level genome assemblies from representative species of three independently evolved seagrass lineages: Posidonia oceanica, Cymodocea nodosa, Thalassia testudinum and Zostera marina. We also include a draft genome of Potamogeton acutifolius, belonging to a freshwater sister lineage to Zosteraceae. All seagrass species share an ancient whole-genome triplication, while additional whole-genome duplications were uncovered for C. nodosa, Z. marina and P. acutifolius. Comparative analysis of selected gene families suggests that the transition from submerged-freshwater to submerged-marine environments mainly involved fine-tuning of multiple processes (such as osmoregulation, salinity, light capture, carbon acquisition and temperature) that all had to happen in parallel, probably explaining why adaptation to a marine lifestyle has been exceedingly rare. Major gene losses related to stomata, volatiles, defence and lignification are probably a consequence of the return to the sea rather than the cause of it. These new genomes will accelerate functional studies and solutions, as continuing losses of the savannahs of the sea are of major concern in times of climate change and loss of biodiversity.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Solution-Phase Growth of Cu Nanowires with Aspect Ratios Greater Than 1000: Multiscale Theory

Penta-twinned metal nanowires are finding widespread application in existing and emerging technologies. However, little is known about their growth mechanisms. Here, we probe the origins of chloride- and alkylamine-mediated, solution-phase growth of penta-twinned Cu nanowires from first principles using multi-scale theory. Using quantum density functional theory (DFT) calculations, we characterize the binding and surface diffusion of Cu atoms on chlorine-covered Cu(100) and Cu(111) surfaces. We find stronger binding and slower diffusion of Cu atoms on chlorinated Cu(111) than on chlorinated Cu(100) – a reversal of the trend for bare Cu surfaces. We also probe inter-facet diffusion and find this proceeds faster from Cu(100) to Cu(111) than the reverse. Using the DFT rates for hopping between individual sites at Ångstrom scales, we calculate coarse-grained, inter-facet rates for nanowires of various lengths – up to hundreds of μm – and diameters in the 10-nm range. We predict nanowires with aspect ratios around 100 based on surface diffusion, alone. We also account for the influence of a self-assembled alkylamine layer that covers most of the {100} facets, but is absent or thin and disordered on the {111} facets and in an “end zone” near the {100}-{111} boundary. With an end zone, we predict a wide range of nanowire aspect ratios in the experimental ranges. Our work reveals the mechanisms by which a halide – chloride – promotes the growth of high-aspect-ratio nanowires.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Delta/Lambda Chirality: From Enantiomers to Diastereomers in Heterometallic Complexes with Chelating Ligands

The Δ/Λ chirality observed in octahedral molecules with chelating ligands represents the major group of “chiral-at-metal” complexes. Upon shifting from mononuclear to polynuclear systems with multiple (≥2) chiral centers, not only enantiomers but also diastereomers should be considered. We present the first, to the best of our knowledge, diastereomeric pairs Δ,Δ,Δ/Λ,Λ,Λ (1) and Δ,Δ,Λ/ Λ,Λ,Δ (2) of the pentanuclear assembly [Mn II (ptac) 3 −Na- Co III (acac) 3 −Na-Mn II (ptac) 3 ] (ptac = 1,1,1-trifluoro-5,5-dimethyl- 2,4-hexanedionate; acac = acetylacetonate). Diastereomers 1 and 2 were isolated in pure form and found to exhibit distinctly different structural characteristics. Importantly, for compounds that are applied as single-source precursors for the quaternary oxide cathode material P2−Na 0.67 Mn 0.67 Co 0.33 O 2 , the diastereomers revealed different thermal behaviors in terms of volatility and thermal stability. Unambiguous assignment of the Mn and Co positions in both diastereomers has been confirmed by the synchrotron X-ray resonant diffraction technique. Oxidation states of metal ions have been verified by the synchrotron X-ray fluorescence spectroscopy. The diastereomerization between 1 and 2 is not taking place in the solid state (crystal-to-crystal), as well as in the gas phase. The transformation between two diastereomers was observed in the solutions of noncoordinating solvents and was related to the polarities of the solvents and diastereomeric molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Formation of Disordered Cocontinuous Phases by Randomly Linked Star Copolymers

Cocontinuous polymeric nanostructures have garnered significant interest due to their ability to combine different properties of two separate polymer domains. Randomly linked copolymer networks have proven to be especially robust for formation of disordered cocontinuous phases across wide composition ranges (≈30 wt % or more). While theoretical treatments of microphase-separated networks have focused primarily on the role of random elastic forces imposed on the self-assembled nanostructures by virtue of the network architecture, experimental studies seeking to disentangle these contributions from other potential effects, such as dispersity in preferred interfacial curvatures, have been scarce. To provide insight into this matter, we here study the self-assembly of randomly linked star copolymers (RSCs), constructed by linking premade polymer arms of polystyrene (PS) and poly(d,l-lactide) (PLA) using 3, 4, and 6-functional connectors. This architecture yields similar distributions of preferred curvature as networks made using corresponding difunctional strands, but lacks the elastic forces imposed by a network architecture. Gravimetry and small-angle X-ray scattering, coupled with scanning electron microscopy, were performed to identify the percolation of PS/PLA RSCs. Remarkably, the 4-arm RSC system exhibited a disordered cocontinuous window of ≈25 wt %, indicating that dispersity in preferred curvature can in some cases be sufficient to robustly drive formation of this morphology. However, the other RSC architectures showed smaller cocontinuous ranges, which we interpret in terms of the influence of homopolymer stars in the 3-arm case and the narrower distribution of preferred interfacial curvatures in the 6-arm case. Finally, thin layers of interconnected porous PS were achieved by solution-processing, suggesting that RSCs have the potential to serve as a robust and easily processable cocontinuous polymeric nanomaterials in both bulk and membrane geometries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗