Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “experimental conditions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Test techniques for obtaining off-nominal compressor data during engine tests

Several unique techniques and related devices are in use at the Lewis Research Center for off-design testing of fan and compressor sections in full-scale jet engines. The devices presented not only permit a wide range of experimental conditions but also minimize downtime for hardware changes. The techniques involve use of such devices as inlet pressure distortion jets, a hydrogen burner for inlet temperature distortions, fan back pressure jets to simulate a variable area nozzle, and either an inflow-outflow bleed system or a fuel spurt system to alter compressor discharge pressure.

Biesiadny, T. J.↗
NASA NTRS1974

Knudsen measurements of the sublimation and the heat of formation of GeSe

Knudsen effusion studies of the sublimation of polycrystalline GeSe have been performed employing mass spectrometry. The results demonstrate that GeSe vaporizes congruently under present experimental conditions according to the reaction: GeSe(s) yields GeSe(g). The mean values for the third-law heat and second-law entropy of reaction based on direct mass-loss data are 42.0 + or - 1.5 kcal/mole and 42.3 + or - 1.6 eu respectively. From these data the standard heat of formation was calculated to be -10.1 + or - 2.0 kcal/mole, and the standard absolute entropy was determined to be 16.9 + or - 2.0 eu.

Wiedemeier, H.↗
NASA NTRS1975

Prediction of elemental creep

Cyclic and steady-state creep tests were performed to provide data which were used to develop predictive equations. These equations, describing creep as a function of stress, temperature, and time, were developed through the use of a least squares regression analyses computer program for both the steady-state and cyclic data sets. Comparison of the data from the two types of tests, revealed that there was no significant difference between the cyclic and steady-state creep strains for the L-605 sheet under the experimental conditions investigated (for the same total time at load). Attempts to develop a single linear equation describing the combined steady-state and cyclic creep data resulted in standard errors of estimates higher than obtained for the individual data sets. A proposed approach to predict elemental creep in metals uses the cyclic creep equation and a computer program which applies strain and time hardening theories of creep accumulation.

Davis, J. W.↗
NASA NTRS1974

Wind-tunnel tests and computer simulations of buoyant wing-tip vortices

It is demonstrated that wing-tip vortices with buoyant cores can be made in a wind tunnel. Wing-tip vortices generated by an aircraft often become buoyant, because of heating effects due to the jet exhaust or in connection with a descending motion in a stable atmosphere. A description of wind-tunnel studies is given, taking into account the experimental conditions, the transition to turbulence, and the drift of the buoyant vortex. A computer simulation of wing-tip vortices is also discussed.

Costen, R. C.↗
NASA NTRS1974

Ignition of partially shattered liquid fuel drops in a reflected shock wave environment

An experimental investigation of the ignition of individual fuel drops after their interaction with an incident and a reflected shock wave near the end wall of a shock tube has been carried out. The influence of the aerodynamic shattering of the fuel drop by the convective flow on the ignition characteristics has been examined by varying the drop-end wall separation distance. Data are presented which show the ignition delay times to be a function of the various experimental conditions encountered in this study. A comparison is made with previous investigations concerning the ignition of a liquid fuel drop due only to the interaction with an incident shock wave.

Wierzba, A. S.↗
NASA NTRS1975

Lifetimes for OH and OD electronic states with resonance transitions in the region between 1700 and 1950 A

The upper states of the OH and OD bands in the region between 1700 and 1950 A have been studied with a phase-shift radiative lifetime apparatus. Lifetimes varying from 1.8 to 2.9 ns have been found. Lifetimes for OH and OD are essentially the same, indicating that the upper states are likely to be depopulated via purely radiative processes under the present experimental conditions. Lifetimes have also been obtained for the C(2)Sigma(+) - A(2)Sigma(+) transition in OH and OD. These results are consistent with the preliminary analysis of Pryce (private communication) that the bands between 1700 and 1950 A in OH are partly due to the C(2)Sigma(+) - X(2)Pi sub i transition.

Smith, W. H.↗
NASA NTRS1974

Measurements of trace constituents from atmospheric infrared emission and absorption spectra, a feasibility study

The feasibility of detecting eight trace constituents (CH4, HCl, HF, HNO3, NH3, NO, NO2 and SO2) against the rest of the atmospheric background at various altitudes from infrared emission and absorption atmospheric spectra was studied. Line-by-line calculations and observational data were used to establish features that can be observed in the atmospheric spectrum due to each trace constituent. Model calculations were made for experimental conditions which approximately represent state of the art emission and absorption spectrometers.

Goldman, A.↗
NASA NTRS1976

Polyimide film wear: Effect of temperature and atmosphere

Friction and wear experiments conducted on polyimide films bonded to 440C stainless steel disks indicated that a wear transition (from high wear to low wear) accompanied a friction transition (from high friction to low friction). In dry argon or dry air (less than 20 ppm H2O), the transition was found to occur at 40 plus or minus 10 C; when H20 was present in air (10,000 ppm H2O), the transition was found to be elevated to a temperature between 100 and 200 C. Wear rate calculations made at 25, 100, and 200 C indicated that film wear was relatively constant for particular experimental conditions; however, the rate was strongly dependent on temperature and atmosphere.

Fusaro, R. L.↗
NASA NTRS1976

Pulsed resonance spectroscopy applied to turbulent combustion flows

The application of pulsed resonance spectroscopy to the measurement of species concentrations in chemically reacting turbulent flows is discussed. The theory of such measurements is developed. An uncertainty analysis is performed, and the results are applied to typical combustion conditions. Experimental aspects are discussed. The method shows a significant theoretical improvement in accuracy over Raman and Reyleigh scattering techniques, and no significant barriers appear to block its development.

Daily, J. W.↗
NASA NTRS1976

Ground-based dosimetry support for experiment AR002

Actinomyces levoris colonies were exposed to alpha particles at the 184-inch cyclotron, and Streptomyces levoris colonies were exposed to Ne-20 ions. A description is given of the experimental conditions for each experiment along with tables listing the doses delivered to the colonies. The doses for the Actinomyces levoris exposures came from calibrations made by the cyclotron operators, while the doses for the Streptomyces levoris exposures came in part from cave calibrations and also in part from calculations.

Cassou, R.↗
NASA NTRS1977

Experiment M131. Human vestibular function

The lower susceptibility to vestibular stimulation aloft, compared with that on ground under experimental conditions, is attributed to a precondition, namely, either there is no need to adapt, or, as exemplified by the Skylab 3 pilot, adaptation to weightlessness is achieved. Findings in some of the astronauts emphasize the distinction between two categories of vestibular side effects: immediate reflex phenomena (illusions, sensations of turning, etc.), and delayed epiphenomena that include the constellation of symptoms and syndromes comprising motion sickness. The drug combinations 1-scopolamine and d-amphetamine and promethazine hydrochloride and ephedrine sulfate are effective in prevention and treatment of motion sickness. It is concluded that prevention of motion sickness in any stressful motion environment involves selection, adaptation, and the use of drugs.

Graybiel, A.↗
NASA NTRS1976

Production of Mg and Al Auger electrons by noble gas ion bombardment of Mg and Al surfaces

Relative production efficiencies of Mg and Al Auger electrons by He, Ne, Ar, Kr, and Xe ion bombardment are reported as a function of ion energy for energies not exceeding 3 keV. The experimental apparatus employed consisted of a LEED-Auger system equipped with an ion gun and a four-grid retarding-potential analyzer. It is found that: (1) the shape of the ion-excited Auger signal was independent of the rare gas and quite symmetric; (2) the Al signal was about an order of magnitude smaller than the Mg signal for a given bombarding species and ion-gun voltage; (3) no signal was observed for He(+) bombardment under any of the experimental conditions; (4) signal strengths were independent of temperature and ion dose; (5) the Auger production efficiencies differed by no more than a factor of two among the different gases - except for He(+) - on a given metal; (6) all the signal strengths increased with increasing ion-gun voltage, with no maximum exhibited; and (7) the apparent threshold energy for the Al signal was higher than that for the Mg signal. The differences between the results for the two metals are attributed to the fact that the Al 2p orbital lies deeper in energy and closer to the nucleus than the corresponding Mg orbital.

Ferrante, J.↗
NASA NTRS1976

Functional colloidal particles for immunoresearch

The paper deals with the development of a new class of immunological reagents consisting of antibodies covalently bonded to polymeric microspheres to serve as convenient markers for detection of cell surface antigens by scanning electron and light microscopy. Attention is focused on the design and synthesis of spherical particles containing hydroxyl and carboxyl groups on their surface in a wide range of sizes (30-340 nm diam) by emulsion copolymerization, the preparation of spherical particles ranging from 300 nm to 3 microns and containing a variety of functional groups by means of ionizing radiation, and the experimental conditions for the covalent bonding of fluorescent molecules and antibodies to the spheres by means of the cyanogen bromide, carbodiimide and glutaraldehyde methods. These reagents are used to locate antigens on red blood cells, on mouse and human lymphocytes, and on the surface of photoreceptors. They offer a number of advantages and applications for the study of cell surfaces for immunodiagnosis.

Yen, S. P. S.↗
NASA NTRS1976

Functional polymeric microspheres based on 2-hydroxyethyl methacrylate for immunochemical studies

Co gamma irradiation of 2-hydroxyethyl methacrylate in the presence or in the absence of other acrylic monomers was found to constitute an effective technique for the synthesis of hydrophilic functional microspheres in the size range of approximately 0.3 to 3 microns in diameter. The effect of monomer concentration, steric stabilization, and electrostatic interaction on the particle size was investigated. Experimental conditions were determined to obtain desired particle sizes of relatively narrow distribution. It was shown that particles may be formed without intermediate micelles, i.e., by homogeneous nucleation, and the rate of particle formation is affected primarily by the rate of particle coalescence in the initial stages of the reaction. When covalently bound to antibodies these microspheres were successfully used to label murine and human lymphocytes.

Rembaum, A.↗
NASA NTRS1977

Coherence between internal and external noise generated by gas turbine combustors

Experiments and analysis on a gas turbine combustor unit are reported with a view in mind to separate propagated acoustic power from non-propagating 'pseudo-sound'. Analytically, it is suggested that a transition frequency will exist below which the interior pressure fluctuations are non-propagating, whereas above this frequency, of the order of 100 Hz, the noise is dominated by propagating acoustic waves. Coherence measurements are reported which show this concept to be borne out experimentally. Coherence between interior and exterior microphones is measured over a wide range of experimental conditions for a gas turbine combustor exhausting directly to the atmosphere. The purpose is to show that below a certain frequency, measurements of interior noise are not indicative of combustion noise ultimately propagating from an engine.

Strahle, W. C.↗
NASA NTRS1976

Effect of ambient temperature on the thermal profile of the human forearm, hand, and fingers

Forearm, hand, and finger skin temperatures were measured on the right and left sides of seven resting men. The purpose was to determine the bilateral symmetry of these segmental temperature profiles at ambient temperatures from 10 to 45 C. Thermistors placed on the right and left forearms, hands, and index fingers were used to monitor the subjects until equilibration was reached at each ambient temperature. Additionally, thermal profiles of both hands were measured with copper-constantan thermocouples. During one experimental condition (23 C ambient), rectal, ear canal, and 24 skin temperatures were measured on each subject. Average body and average skin temperatures are given for each subject at the 23 C ambient condition. Detailed thermal profiles are also presented for the dorsal, ventral, and circumferential left forearm, hand, and finger skin temperatures at 23 C ambient. No significant differences were found between the mean skin temperatures of the right and left contralateral segments at any of the selected ambient temperatures.

Montgomery, L. D.↗
NASA NTRS1977

Bisphenol A polycarbonate as a reference material

Test methods require reference materials to standardize and maintain quality control. Various materials have been evaluated as possible reference materials, including a sample of bisphenol A polycarbonate without additives. Screening tests for relative toxicity under various experimental conditions were performed using male mice exposed to pyrolysis effluents over a 200-800 C temperature range. It was found that the bisphenol A polycarbonate served as a suitable reference material as it is available in large quantities, and does not significantly change with time.

Hilado, C. J.↗
NASA NTRS1977

On the origin of extraterrestrial stratospheric particles: Interplanetary dust or meteor ablation debris?

Meteor ablation debris was distinguished from unablated interplanetary dust in a collection of extraterrestrial particles collected in the stratosphere using NASA U-2 aircraft. A 62 g sample of the Murchison (C2) meteorite was artificially ablated to characterize ablation debris for comparison with the stratospheric particles. By using proper experimental conditions, artificial ablation debris can be produced that is similar to natural ablation debris. Analyses of natural fusion crusts, artificial fusion crust, and artificial ablation debris of the Murchison meteorite produced criteria for recognizing debris ablated by a primitive meteoroid. Ninety-five percent of the stratospheric particles can be described as either ablation debris from a primitive meteoroid, or as very primitive interplanetary dust.

Kyte, F. T.↗