SEARCH · Engineering Papers

Results for “arms control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Definition of ground test for verification of large space structure control

Directions regarding the analytical models were received. A counter balance arm with weights was added at the top of the ASTROMAST to offset the arm with the gimbals. In addition to this model, three more models were requested from MSFC: structure as in the revised model with the addition of lumped masses at bays 46 and 91 of the ASTROMAST; cantilevered cruciform structure with lumped masses at bays 46 and 91, and an all up cruciform structure with lumped masses at bays 46 and 91. Figures for each model and their corresponding natural frequencies and general mode shapes associated with these frequencies are included. The drawbar in use in the cruciform models must be incorporated into the antenna and ASTROMAST models. The total tensile load carrying capability of the ASTROMAST is approximately 840 pounds.

Seltzer, S. M.↗

NASA NTRS1989

Small motion experiments on a large flexible arm with strain feedback

Initial experiments on state-space feedback control of a large flexible manipulator with a parallel linkage drive are described. A linear controller using joint angle and strain measurements has been designed to minimize a quadratic performance index with a prescribed stability margin. It is based on a simplified model that accounts for the constraints of the parallel linkage kinematically rather than through constraint forces. The results show substantial improvement over a simple proportional-derivative joint control.

Yuan, B. S.↗

NASA NTRS1986

Control of elastic robotic systems by nonlinear inversion and modal damping

Energy efficient, lightweight robot arms for space applications have considerable structural flexibility. For large and fast motions, both the nonlinear coupled dynamics and the elastic behavior of the robots must be considered in control system designs. This paper presents an approach to the control of a class of flexible robotic systems. A control law is derived which decouples the joint-angle motion from the flexible motion and asymptotically decomposes the elastic dynamics into two subsystems, representing the transverse vibrations of the elastic link in two orthogonal planes. This decomposition allows the design of an elastic mode stabilizer independently based on lower order models representing structural flexibility. The closed-loop system is shown to be globally asymptotically stable and robust to uncertainty in system parameters. Simulation results are presented to show that large, fast control of joint angles can be performed in spite of space vehicle motion and uncertainty in the payload.

Singh, S. N.↗

NASA NTRS1990

Jet Propulsion Laboratory/Kennedy Space Center telerobotic inspection and manipulation demonstration

The goal of this effort is to demonstrate telerobotic inspection and mainpulation of space shuttle payloads in the presence of substantial communications time delays between the operator station and the robotic work space. The processing of space shuttle payloads provides a variety of tasks which are typical of both space shuttle ground operations and Space Station in-flight operations, and communications time delays are inevitable in space operations where the operator station will be light-seconds away from the telerobot. With this demonstration we hope to show the efficacy and safety of robotic technology for ground and space operations. Our approach is to develop an experimental telerobotic system with the remote sensing, actuation and reflex portions located at KSC in Florida, while the operator control station will be located at Jet Propulsion Laboratory (JPL) in California. The JPL portion of the system includes a high-level operator interface, intelligent spatial planning and machine vision, while the KSC portion includes the robot arm, end effectors, cameras and proximity sensors, and the necessary control and communications computers and software. The communications between JPL and KSC are over a limited-bandwidth network channel (19200 baud) with unpredictable and unrepeatable time delays. In FY89 we integrated a basic version of the robotic, communications, and computer hardware, and we developed the software to perform an operator-supervised inspection of a PAM-D satellite upper stage rocket motor and its shuttle support cradle. The demonstration, though severely limited by the bulk of the available computer arm, showed the potential of telerobotics for inspection tasks. In the future, we plan to develop additional capabilities which will allow manipulation tasks to be performed, including removal of dust covers and lens caps, insertion of connectors and batteries, and installation of payload objects.

Wilcox, Brian↗

NASA NTRS1990

Cartesian-based control of a deformable robot manipulator

A control scheme for the 6-DOF Cincinnati-Milacron T3 robot arm is developed and demonstrated by means of numerical simulations. The arm is modeled as an open-loop articulated system with both actuators and position and velocity sensors at each joint, and a Cartesian-frame control algorithm is constructed in which (1) an adaptive scheme decouples the end-effector subsystem from the complex highly nonlinear main system and (2) a servo scheme drives the reduced system to follow a presumed end-effector trajectory on the basis of the Cartesian-frame feedback gains. The velocity transformation used to transfer the control forces from the Cartesian frame to joint-based space is explained, and the simulation results are presented in extensive graphs and diagrams. The control is found to respond well to system-topology changes and robot-environment impacts.

Chang, C. W.↗

NASA NTRS2004

Hand-Eye Calibration of Robonaut

NASA's Human Space Flight program depends heavily on Extra-Vehicular Activities (EVA's) performed by human astronauts. EVA is a high risk environment that requires extensive training and ground support. In collaboration with the Defense Advanced Research Projects Agency (DARPA), NASA is conducting a ground development project to produce a robotic astronaut's assistant, called Robonaut, that could help reduce human EVA time and workload. The project described in this paper designed and implemented a hand-eye calibration scheme for Robonaut, Unit A. The intent of this calibration scheme is to improve hand-eye coordination of the robot. The basic approach is to use kinematic and stereo vision measurements, namely the joint angles self-reported by the right arm and 3-D positions of a calibration fixture as measured by vision, to estimate the transformation from Robonaut's base coordinate system to its hand coordinate system and to its vision coordinate system. Two methods of gathering data sets have been developed, along with software to support each. In the first, the system observes the robotic arm and neck angles as the robot is operated under external control, and measures the 3-D position of a calibration fixture using Robonaut's stereo cameras, and logs these data. In the second, the system drives the arm and neck through a set of pre-recorded configurations, and data are again logged. Two variants of the calibration scheme have been developed. The full calibration scheme is a batch procedure that estimates all relevant kinematic parameters of the arm and neck of the robot The daily calibration scheme estimates only joint offsets for each rotational joint on the arm and neck, which are assumed to change from day to day. The schemes have been designed to be automatic and easy to use so that the robot can be fully recalibrated when needed such as after repair, upgrade, etc, and can be partially recalibrated after each power cycle. The scheme has been implemented on Robonaut Unit A and has been shown to reduce mismatch between kinematically derived positions and visually derived positions from a mean of 13.75cm using the previous calibration to means of 1.85cm using a full calibration and 2.02cm using a suboptimal but faster daily calibration. This improved calibration has already enabled the robot to more accurately reach for and grasp objects that it sees within its workspace. The system has been used to support an autonomous wrench-grasping experiment and significantly improved the workspace positioning of the hand based on visually derived wrench position. estimates.

Nickels, Kevin↗

DOE OSTI2023

Control of power converters having integrated capacitor blocked transistor cells

Various examples of power converters including Integrated Capacitor Blocked Transistor (ICBT) cells and methods of control of power converters having ICBT cells are described. In one example, a power converter includes an upper arm including a plurality of upper ICBT cells connected in series to form a series connection path and a lower arm including a plurality of lower ICBT cells connected in series in the series connection path. A controller can be configured to provide a control signal pair to each of the upper ICBT cells and a complementary control signal pair to each of the lower ICBT cells to control the converter output. A capacitor voltage controller can be configured to balance a voltage potential among ICBT capacitors in at least one of the upper arm and the lower arm.

Yu, Jianghui↗

NASA NTRS1987

Digital Control For Remote Manipulators

Multiple microprocessors enable large separations between controllers and manipulators. Controller for remote manipulator requires no direct mechanical connection between slave arm and master arm moved by human operator. Employs two-way digital data transmission rather than mechanical linkage between master and slave. Manipulator a considerable distance from operator. Software for controller distributed between master and slave locations. Organized into modules. Hardware and software for system demonstrated in laboratory model.

Bejczy, Antal K.↗

NASA NTRS2003

Cognitive deficits induced by 56Fe radiation exposure

Exposing rats to particles of high energy and charge (e.g., 56Fe) disrupts neuronal systems and the behaviors mediated by them; these adverse behavioral and neuronal effects are similar to those seen in aged animals. Because cognition declines with age, and our previous study showed that radiation disrupted Morris water maze spatial learning and memory performance, the present study used an 8-arm radial maze (RAM) to further test the cognitive behavioral consequences of radiation exposure. Control rats or rats exposed to whole-body irradiation with 1.0 Gy of 1 GeV/n high-energy 56Fe particles (delivered at the alternating gradient synchrotron at Brookhaven National Laboratory) were tested nine months following exposure. Radiation adversely affected RAM performance, and the changes seen parallel those of aging. Irradiated animals entered baited arms during the first 4 choices significantly less than did controls, produced their first error sooner, and also tended to make more errors as measured by re-entries into non-baited arms. These results show that irradiation with high-energy particles produces age-like decrements in cognitive behavior that may impair the ability of astronauts to perform critical tasks during long-term space travel beyond the magnetosphere. Published by Elsevier Science Ltd on behalf of COSPAR.

Non-NASA Center↗

DOE OSTI2025

KAZR2CFRGEQC

Ka-Band ARM Zenith Radar, 2nd Generation, General Sensitivity, Quality Control Corrections Applied

Radar Doppler↗

DOE OSTI2025

KAZR2CFRMDQC

Ka-Band ARM Zenith Radar, 2nd Generation, Medium Sensitivity, Quality Control Corrections Applied

Radar Doppler↗

DOE OSTI2025

KAZR2CFRPRQC

Ka-Band ARM Zenith Radar, 2nd Generation, Precipitation Mode, Quality Control Corrections Applied

Radar Doppler↗

NASA NTRS1979

Constant lift rotor for a heavier than air craft

A rotor blade extended radially from a hub, characterized by an elongated spar and a plurality of axially aligned shells pivotally mounted on the spar is presented. Each has an aerodynamic center located in trailing relation with the spar and supported thereby for simultaneous axial and angular displacement as centrifugal forces are applied, a pitch controller plus a plurality of pivotal pitch limiting arms transversely related to the spar. A push-pull link interconnecting the arms is used for imparting simultaneous pivotal motion, whereby the angular relationship of the arms to the spar is varied for varying the motion of the trucks along the arms for thus limiting the pitch of the segments about the spar.

Stroub, R. H.↗

NASA NTRS1983

Acceleration environment of payloads while being handled by the Shuttle Remote Manipulator System

Described in this paper is the method used in the Draper Remote Manipulator System (RMS) Simulation to compute linear accelerations at the point on the SPAS01 payload where its accelerometers are mounted. Simulated accelerometer output for representative on-orbit activities is presented. The objectives of post-flight analysis of SPAS01 data are discussed. Finally, the point is made that designers of acceleration-dependent payloads may have an interest in the capability of simulating the acceleration environment of payloads while under the control of the overall Payload Deployment and retrieval System (PDRS) that includes the Orbiter and its attitude control system as well as the Remote Manipulator Arm.

Turnbull, J. F.↗

NASA NTRS1985

Control of a free-flying robot manipulator system

The goal of the research is to develop and test control strategies for a self-contained, free flying space robot. Such a robot would perform operations in space similar to those currently handled by astronauts during extravehicular activity (EVA). The focus of the work is to develop and carry out a program of research with a series of physical Satellite Robot Simulator Vehicles (SRSV's), two-dimensionally freely mobile laboratory models of autonomous free-flying space robots such as might perform extravehicular functions associated with operation of a space station or repair of orbiting satellites. The development of the SRSV and of some of the controller subsystems are discribed. The two-link arm was fitted to the SRSV base, and researchers explored the open-loop characteristics of the arm and thruster actuators. Work began on building the software foundation necessary for use of the on-board computer, as well as hardware and software for a local vision system for target identification and tracking.

Alexander, H.↗

NASA NTRS1989

Time optimal movement of cooperating robots

The maximization of the speed of movement along a prescribed path, of the system formed by a set of robot arms and the object they hold is examined. The actuator torques that maximize the acceleration of the system are shown to be determined by the solution to a standard linear programming problem. The combination of this result with the known control strategy for time optimal movement of a single robot arm yields an algorithm for time optimal movement of multiple robot arms holding the same workpiece.

Mccarthy, J. M.↗

NASA NTRS1992

Reflexive Avoidance Of Obstacles By Robots

Array of sensors at elbow of robotic manipulator detects obstacles. Outputs of sensors processed into synthetic "force field" around each obstacle. Algorithm controlling manipulator uses "force field" to maneuver manipulator arm around each obstacle.

Vold, Havard I.↗

NASA NTRS1992

Robust manipulator controller specification and design

This paper suggests the use of a model based control law which uses joint rate feedback to stabilize the contact modes, and joint velocity feedforward to provide the required freespace performance throughout a task. An additional benefit of this controller is the capability to stiffen a soft manipulator. This provides an option for impedance control to provide any desired manipulator stiffness. Impedance control is implemented as an outer Cartesian loop which uses the dynamic relationship between manipulator commanded position and applied force to change the mechanical impedance through programmable filter coefficients. The impedance control discussed in this paper does not give the capability to specify the full impedance of the manipulator. However, it does give the capability to specify the manipulator Cartesian stiffness while maintaining stability in contact with the environment. This controller was designed for the Flight Telerobotic Servicer dextrous manipulator and has been validated experimentally on a single joint controller, as well as on 3 DOF planar arms.

Goldenberg, Stewart↗