Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Oxidation processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Investigation of Oxidation Mechanisms in HfS 2 and ZrS 2 via In Situ Electron Microscopy

Transition metal dichalcogenides (TMD) combine semiconducting properties with stability and are therefore widely studied for future microelectronic devices. However, applications require integration with a suitable dielectric at a planar, defect-free interface. For Hf- and Zr-based TMDs, the good dielectric properties of hafnia and zirconia imply that direct oxidation is a promising strategy, provided that a high-quality interface and suitable oxide morphology can be formed. Here, in this study, we investigate HfS 2 and ZrS 2 oxidation, aiming to understand pathways toward planar oxide layer formation and the mechanisms that determine the characteristics of the semiconductor/dielectric interface. We use conventional and environmental transmission electron microscopy to reveal changes in morphology and composition of the TMDs under different gaseous environments. We show that oxidation at ambient conditions causes compositional heterogeneities, with local replacement of S by O in both materials. Thermal oxidation causes desulfurization and formation of a smooth but defective oxide layer. In contrast, plasma oxidation appears the best-suited to forming a controlled TMD/dielectric interface with a smooth oxide layer and without major defects. These results provide insight into the opportunities available from HfS 2 and ZrS 2 through oxidation and suggest a materials processing strategy for electronic device fabrication.

HfS2↗
DOE OSTI2025

Light-Promoted C(sp 3 )–C(sp 3 ) Reductive Elimination from Dialkyl NiII Complexes

Ni-catalyzed cross-coupling is a powerful strategy to forge C(sp 3 )–C(sp 3 ) bonds. Typically, to do so requires overcoming a challenging C–C bond-forming reductive elimination, often enabled by the intermediacy of highly oxidized Ni species or outer-sphere processes. While direct C(sp 3 )–C(sp 3 ) reductive elimination from the Ni II base oxidation state is normally thermally inaccessible, light-activation provides an avenue to affect such transformations. Here, we investigate the mechanism of light-induced C(sp 3 )–C(sp 3 ) bond formation from dialkyl bipyridine Ni II complexes through a variety of organometallic, spectroscopic, and computational studies. Wavelength-dependent quantum yields, ligand electronics–reactivity relationships, excited-state lifetimes, computed barriers, and product distributions from crossover studies support a photolysis/radical rebound mechanism. Furthermore, this reactivity paradigm complements existing strategies in the literature to promote reductive elimination from Ni II , such as the use of destabilizing, sterically hindered ligands and reduction of electron density at Ni through the binding of electron-deficient olefins. Hence, we envision that light-induced reductive elimination may enable the development of challenging C(sp 3 )–C(sp 3 ) couplings.

Alkyls↗
DOE OSTI2022

Catalyst and reactor design considerations for selective production of acids by oxidative cleavage of alkenes and unsaturated fatty acids with H 2 O 2

Oxidative cleavage of alkenes and unsaturated fatty acids with hydrogen peroxide gives an efficient and sustainable process to obtain mono- and di-acids for polymers and lubricants with fewer safety risks and less environmental impact than processes that utilize ozone or other inorganic oxidizers (e.g., permanganate, dichromate, etc.). Guided by insight into the mechanisms for competing reaction pathways (i.e., epoxidation of alkene on W–(η 2 -O 2 ) complexes vs. H 2 O 2 decomposition) and the apparent kinetics derived from kinetic experiments, here, we postulate that W-based heterogeneous catalysts can provide high performance and stable operations at low H 2 O 2 concentrations. Semi-batch reactors with continuous introduction of H 2 O 2 solutions offer the means to maintain low H 2 O 2 concentrations while providing sufficient quantities of H 2 O 2 to satisfy the reaction stoichiometry. We derived simple kinetic model equations for the epoxidation, ring-opening, oxidative cleavage, and oxidation steps and fit theses equations to batch experimental data to obtain kinetic parameters. Furthermore, this kinetic model describes the concentration profiles of reactant, oxidant, and products well as shown by agreement with experimental data. Further predictions of the optimal H 2 O 2 feed rate for semi-batch operation utilized by the proposed rate expressions and the reactor design equations suggest that low H 2 O 2 feed rate increases selectivity towards oxidative cleavage products and selective use of H 2 O 2 for oxidative cleavage pathway. Comparisons of oxidative cleavage of 4-octene in batch and semi-batch reactors show that semibatch reactors with optimized molar feed rates of H 2 O 2 increased oxidative cleavage product selectivities (76% to 99%; with an increase in butyric acid selectivity from 1% to 55%) and H 2 O 2 selectivity (3% to 30%). In addition, semibatch reaction conditions used avoid H 2 O 2 -mediated dissolution of W-atoms from the catalyst. Analysis of these findings suggest that solid oxide catalysts will be effective for continuous oxidative cleavage reactions if deployed within fixed-bed reactors that allow for distributed introduction of reactants and therefore low in situ concentrations of H 2 O 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Data for Catalyst and Reactor Design Considerations for Selective Production of Acids by Oxidative Cleavage of Alkenes with H2O2

Oxidative cleavage of alkenes and unsaturated fatty acids with hydrogen peroxide gives an efficient and sustainable process to obtain mono- and di-acids for polymers and lubricants with fewer safety risks and less environmental impact than processes that utilize ozone or other inorganic oxidizers (e.g., permanganate, dichromate, etc.). Guided by insight into the mechanisms for competing reaction pathways (i.e., epoxidation of alkene on W–(η2-O2) complexes vs. H2O2 decomposition) and the apparent kinetics derived from kinetic experiments, here, we postulate that W-based heterogeneous catalysts can provide high performance and stable operations at low H2O2 concentrations. Semi-batch reactors with continuous introduction of H2O2 solutions offer the means to maintain low H2O2 concentrations while providing sufficient quantities of H2O2 to satisfy the reaction stoichiometry. We derived simple kinetic model equations for the epoxidation, ring-opening, oxidative cleavage, and oxidation steps and fit theses equations to batch experimental data to obtain kinetic parameters. This kinetic model describes the concentration profiles of reactant, oxidant, and products well as shown by agreement with experimental data. Further predictions of the optimal H2O2 feed rate for semi-batch operation utilized by the proposed rate expressions and the reactor design equations suggest that low H2O2 feed rate increases selectivity towards oxidative cleavage products and selective use of H2O2 for oxidative cleavage pathway. Comparisons of oxidative cleavage of 4-octene in batch and semi-batch reactors show that semi-batch reactors with optimized molar feed rates of H2O2 increased oxidative cleavage product selectivities (76% to 99%; with an increase in butyric acid selectivity from 1% to 55%) and H2O2 selectivity (3% to 30%). In addition, semi-batch reaction conditions used avoid H2O2-mediated dissolution of W-atoms from the catalyst. Analysis of these findings suggest that solid oxide catalysts will be effective for continuous oxidative cleavage reactions if deployed within fixed-bed reactors that allow for distributed introduction of reactants and therefore low in situ concentrations of H2O2.

Catalysis↗
DOE OSTI2020

Effect of ionizing radiation on PuO2 and surrogate oxide materials under storage conditions

The stockpile of plutonium separated from used nuclear fuel amounts to many 100s of tonnes. The majority of this plutonium is stored as PuO2 powder packaged in multi-can containers. The conditions during the packaging of reprocessed PuO2 for long term storage are closely controlled to limit water uptake as radiolytic decomposition of any adsorbed water will lead to the formation of both a potentially flammable atmosphere containing molecular hydrogen as well as reactive oxygen species which may be incorporated into the oxide phase. Consequently, the safety case for the long-term storage of PuO2 requires a complete understanding of the fundamental physical, chemical and materials degradation processes occurring at the water-oxide interface inside the storage canisters. This study investigates the effect of ionizing radiation on PuO2 and various surrogate oxides under atmospheres potentially encountered in storage canisters.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Protection and enrichment: how two different carbonaceous biofilm supports improve methane yield from encapsulated anaerobic microorganisms

Encapsulating anaerobic microorganisms allows for the separation of the solids retention time from the hydraulic retention time during anaerobic wastewater treatment. The harsh chemistries involved in the process of encapsulation can have adverse effects on microorganisms for anaerobic digestion, especially methanogens, and can lead to lower methane yields after encapsulation. Improving the survival and maintaining activity of anaerobic communities during encapsulation will likely be the key to improving methane yield. In this study, we investigated the encapsulation of biomass grown as biofilms on two carbonaceous materials, biochar and powdered activated carbon (PAC), to improve methane yield. Microorganisms grown as biofilms on biochar and PAC were encapsulated in polyethylene glycol (PEG) and incubated for 10 days. After 10 days, the unamended control capsules produced 81.6 ± 5.4 μmol of methane, while PAC-amended capsules produced 129.8 ± 1.9 μmol and biochar-amended capsules produced 432.96 ± 20.8 μmol methane, with the differences being statistically significant (p < 0.05). In biochar, a higher relative abundance of methanogens led to increased methane production capacity. The ratio of the methyl coenzyme M reductase (mcrA) genes to total 16S rRNA genes in the encapsulated biochar-supported biofilms was significantly higher than that in the encapsulated unsupported (p = 4.9 × 10 −5 ) and the PAC-supported biofilms (p = 0.012). Biochar-supported biofilms also had higher methane output per mcrA or 16S rRNA gene copy number. For the PAC, biofilms were protected from ammonium persulfate (APS), a powerful oxidant used in the encapsulation process. PAC removed 92% of dissolved APS, reducing exposure of the methanogens to this chemical. Unfortunately, this removal of APS compromised capsule stability, limiting the amount of PAC that could be added to the capsules. Furthermore, amendments that improve survival and activity of methanogens should be used in the capsules instead of those that protect methanogens by interfering with encapsulant polymerization chemistry.

Resource recovery↗
DOE OSTI2021

Transport and chemistry of isoprene and its oxidation products in deep convective clouds

Deep convective clouds can transport trace gases from the planetary boundary layer into the upper troposphere where subsequent chemistry may impact aerosol particle formation and growth. In this modelling study, we investigate processes that affect isoprene and its oxidation products injected into the upper troposphere by an isolated deep convective cloud in the Amazon. We run a photochemical box model with coupled cloud microphysics along hundreds of individual air parcel trajectories sampled from a cloud-resolving model simulation of a convective event. The box model simulates gas-phase chemical reactions, gas scavenging by liquid and ice hydrometeors, and turbulent dilution inside a deep convective cloud. The results illustrate the potential importance of gas uptake to anvil ice in regulating the intensity of the isoprene oxidation and associated low volatility organic vapour concentrations in the outflow. Isoprene transport and fate also depends on the abundance of lightning-generated nitrogen oxide radicals (NO x = NO + NO 2 ). If gas uptake on ice is efficient and lightning activity is low, around 30% of the boundary layer isoprene will survive to the cloud outflow after approximately one hour of transport, while all the low volatile oxidation products will be scavenged by the cloud hydrometeors. If lightning NO x is abundant and gas uptake by ice is inefficient, then all isoprene will be oxidised during transport or in the immediate outflow region, while several low volatility isoprene oxidation products will have elevated concentrations in the cloud outflow. Reducing uncertainties associated with the uptake of vapours on ice hydrometeors, especially HO 2 and oxygenated organics, is essential to improve predictions of isoprene and its oxidation products in deep convective outflows and their potential contribution to new particle formation and growth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Uncovering phase transformation, morphological evolution, and nanoscale color heterogeneity in tungsten oxide electrochromic materials

Controlling the electrochemical interfacial processes that govern the durability of electrochromic devices represents a key challenge in developing sustainable and cost-effective smart windows. Here, we revisit the classical tungsten trioxide (WO 3 ) materials as a platform to uncover the previously unknown interrelationship between phase transformation, morphological evolution, and nanoscale color heterogeneity in these materials. Through synchrotron/electron spectroscopic and imaging analyses, we report that the WO 3 –electrolyte interface is influenced by the tungsten dissolution and redeposition during the electrochemical cycling. The tungsten redeposition provokes the in situ crystal growth, which ultimately leads to the phase transformation from the semicrystalline WO 3 to a nanoflake-shaped, proton-trapped tungsten trioxide dihydrate (H x WO 3 · 2 H 2 O). The multidimensional quantification of the electronic structure reveals that the tungsten reduction caused by the proton trapping is heterogeneous at the nanometric scale and is responsible for the nanoscale color heterogeneity. The interplay between phase transformation, morphological evolution, and nanoscale color heterogeneity results in degraded optical modulation, switching kinetics, coulombic efficiency, and bleached-state transparency. Our results highlight that the high interfacial reactivity near the electrode surface may be the underlying mechanism for undesired bulk structural changes of electrochromic materials, and calls for fundamental studies in probing and controlling the electrode–electrolyte interfacial processes in electrochromic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Time-resolved chemically-selective spectroscopic investigation of the redox reaction between hematite and aluminium

Thermite reactions –highly energetic redox processes between a metal and an oxide—are used in welding, propulsion, and the fabrication of advanced materials. When reduced to the nanoscale, these reactions exhibit enhanced energetic performance, but their ultrafast dynamics remain poorly understood. Gaining insight into charge transfer during these processes is essential for advancing applications in energy conversion and materials design. Here we show that the reaction between aluminium and hematite, a common iron oxide, can be tracked with femtosecond resolution using extreme ultraviolet (EUV) time-resolved absorption spectroscopy at the Fe M 2,3 and Al L 2,3 edges. By exciting the system with an ultrashort optical pulse and probing element-specific absorption changes, we observe an early spectral shift that reveals the formation of localized charge carriers (polarons). Comparing samples with different supporting substrates highlights ultrafast electron transfer from aluminium to hematite. These results demonstrate an approach to investigating charge flow in energetic materials and provide a basis for studying fast chemical reactions with chemical specificity.

Electron transfer↗
DOE OSTI2020

What can we learn from N 2 O isotope data? – Analytics, processes and modelling

The isotopic composition of nitrous oxide (N 2 O) provides useful information for evaluating N 2 O sources and budgets. Due to the co–occurrence of multiple N 2 O transformation pathways, it is, however, challenging to use isotopic information to quantify the contribution of distinct processes across variable spatiotemporal scales. Here, we present an overview of recent progress in N 2 O isotopic studies and provide suggestions for future research, mainly focusing on: analytical techniques; production and consumption processes; and interpretation and modelling approaches. Comparing isotope–ratio mass spectrometry (IRMS) with laser absorption spectroscopy (LAS), we conclude that IRMS is a precise technique for laboratory analysis of N 2 O isotopes, while LAS is more suitable for in situ/inline studies and offers advantages for site–specific analyses. When reviewing the link between the N 2 O isotopic composition and underlying mechanisms/processes, we find that, at the molecular scale, the specific enzymes and mechanisms involved determine isotopic fractionation effects. In contrast, at plot–to–global scales, mixing of N 2 O derived from different processes and their isotopic variability must be considered. We also find that dual isotope plots are effective for semi–quantitative attribution of co–occurring N 2 O production and reduction processes. More recently, process–based N 2 O isotopic models have been developed for natural abundance and 15 N–tracing studies, and have been shown to be effective, particularly for data with adequate temporal resolution. Here, despite the significant progress made over the last decade, there is still great need and potential for future work, including development of analytical techniques, reference materials and inter–laboratory comparisons, further exploration of N 2 O formation and destruction mechanisms, more observations across scales, and design and validation of interpretation and modelling approaches. Synthesizing all these efforts, we are confident that the N 2 O isotope community will continue to advance our understanding of N 2 O transformation processes in all spheres of the Earth, and in turn to gain improved constraints on regional and global budgets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

The Critical Influence of Spin–Dry Technique on the Surface Passivation Quality of Crystalline Silicon Solar Cell Structures

This study examines the effects of spin-dry (SD) and N 2 blow-dry (ND) techniques on the quality and surface passivation performance of silicon oxide grown in ozone-dissolved deionized water. The SD method achieves greater oxide thickness uniformity, averaging 1.39 nm ± 4.17% across 49 points, compared to 1.68 nm ± 21.67% for the ND wafers. However, persistently poor passivation of ozonated oxide-grown wafers following the SD process is exhibited, with carrier lifetime, τ eff < 0.3 ms and saturation current density, J 0 (per side) ranging from 26 to 45 fA cm 2 . These findings are analyzed in the context of the fundamental phenomena involved in the drying processes of both techniques. Following this, an optimized spin-drying process is developed, resulting in improved τ eff and J 0 values of 1.4 ms and 5.6 fA cm –2 , respectively. Scanning electron microscopy further confirms that the oxide films dried with the enhanced SD technique are free of pinholes.

14 SOLAR ENERGY↗
DOE OSTI2025

Modulating Poly(oligocyclobutane) Properties Through Backbone Modifications

Poly(1,n′-divinyl)oligocyclobutane (pDVOCB) has emerged as a class of poly(cycloolefin) that is amenable to chemical recycling and demonstrates promising thermomechanical properties. However, their high melting temperatures coupled with insolubility makes melt processing challenging due to thermo-oxidation of internal alkenes. To address these issues, we describe a series of polymers incorporating modifications to the pDVOCB backbone and analyze the effects on material stability and processability. Intentional migration of the internal 1,2-disubstituted alkenes to an exocyclic trisubstituted position yields isomerized pDVOCB (IpDVOCB) which exhibits a depression of thermal transitions by up to 50 °C. Conversely, elimination of stereoirregularity between enchained DVOCB oligomers through alkene saturation yields hydrogenated pDVOCB (HpDVOCB), resulting in elevated thermal transitions by up to 30 °C. Furthermore, these shifts are attributed to changes in crystal defect density which is strongly influenced by chain stereoregularity. Understanding these behaviors guides future polymer design and expands the control and use of this new class of recyclable poly(cycloolefin)s.

Differential scanning calorimetry↗
DOE OSTI2022

Novel Modular Electrocatalytic Processing for Simultaneous Conversion of Carbon Dioxide and Wet Shale Gas into Valuable Products (Final Report)

This report examines solid oxide electrolyzer cell (SOEC) technology as an alternative process for the manufacture of carbon monoxide (CO) and the separation of ethane (C 2 H 6 ) from wet natural gas (WNG). SOEC cathodes for the electrochemical reduction of carbon dioxide (CO 2 ) to CO and SOEC anodes for the selective electrochemical oxidation of C 2 H 6 to ethylene (C 2 H 4 ) are described and presented. Lifecycle and techno-economic analyses (LCA and TEA) utilizing SOEC technology for the production of CO are also reported.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

Catalytic Effects of Silver in Iodine Reactors for Dissolved Used Nuclear Fuel

The dissolution of used nuclear fuel generates a variety of off-gasses including flammable hydrogen and other species that are a concern for environmental release. The H-Canyon facility at the Savannah River Site is currently dissolving aluminum-clad research reactor fuel from material test reactors and the High Flux Isotope Reactor (HFIR) using a mercury-catalyzed nitric acid flowsheet. Savannah River National Laboratory recently developed and deployed a Raman spectrometer to monitor the off-gas stream from the dissolution process. Results from these measurements indicated a lack of the expected hydrogen, nitrous oxide, and nitric oxide in the off-gas stream. It was proposed that the silver on the silver nitrate–coated berl saddles present in the reactors for iodine capture were acting as a catalytic hydrogen recombiner. Nitric oxide is readily oxidized to nitrogen dioxide under normal conditions, but it was unclear what happened to the nitrous oxide. A laboratory-scale iodine reactor was assembled and filled with silver nitrate–coated berl saddles to help ascertain the fate of nitrous oxide and hydrogen. Testing with this laboratory-scale reactor observed the recombination of hydrogen when a simulated dissolver off-gas was passed through the reactor containing silver nitrate–coated berl saddles at the approximate temperatures seen in H-Canyon. However, the nitrous oxide concentration was unchanged, suggesting a more complex process occurring within the off-gas stream before it reaches the iodine reactors at H-Canyon.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Potential safety impacts associated with production of gaseous PuF 6 due to reactions between 3013-compliant PuO 2 with Novec TM 1230 at temperature

A part of the NNSA/SRNS Surplus Plutonium Disposition (SPD) project is a planned expansion of an existing facility with capabilities to handle, process, package, and characterize large amounts of plutonium oxide materials for permanent disposition at WIPP. The facility design for this future processing capability will include glovebox operations, HEPA filters, and exhaust/ventilation systems. An NNSA review of the facility support systems included comments on the potential residual reactivity of previously-stabilized PuO 2 , and on the possibility of chemical interactions between stabilized PuO 2 and a new fire suppressant (Novec TM 1230), a replacement for chlorinated/brominated compounds such as HALON TM , to be employed in the event of a room/glovebox fire where PuO 2 will be processed.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Catalytic open-circuit passivation by thin metal oxide films of p-Si anodes in aqueous alkaline electrolytes

Ni and NiO x -based protective thin films are shown to catalyze the oxidation of Si in the presence of O 2 in strongly alkaline KOH(aq) even in the absence of illumination. The O 2 in solution drove the open-circuit potential of the electrode to >0.4 V, which is positive of the Si passivation potential. The elevated electrochemical potential of the surface promoted formation of passive oxides on exposed Si regions of Si/Ni electrodes. Catalytic passivation of Si extended the durability of an np + -Si(100)/NiO x photoanode to >400 h while operating under simulated day/night cycles. In contrast, electrodes without a Ni(O x ) layer and/or without O 2 in solution displayed direct etching of the Si and corrosion pitting during non-illuminated, simulated nighttime episodes of day/night cycling. The O 2 -derived catalyzed passivation of Si using thin films can be generalized to multiple phases of NiO x as well as to materials other than Ni. Finally, relative to operation in aqueous alkaline conditions, decreasing the pH of the electrolyte decreased the dissolution rate of the protective oxide layer formed by the catalyzed passivation process, and consequently increased the durability of the photoanode, but yielded lower photoelectrode fill factors for water oxidation due to the relatively large kinetic overpotentials for the electrocatalyzed oxygen-evolution reaction at near-neutral pH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Produce ZrH Moderator Material

This reports complete Milestone M2.2.3 Produce zirconium hydride moderator material. In this milestone, we report the successful fabrication of FeCrAl alloys cladded zirconium hydride moderator. Different types of crucible designs were presented, including the basic design with bar cladding material, basic design with tube cladding material, and crucible design with position holding function. Mo and FeCrAl were used as the trial cladding materials. The welding techniques and procedures were reported and discussed. Totally three welding techniques were adopted in the development of moderator cladding, and they are electron beam welding (EBW), laser welding (LW), and gas tungsten arc welding (GTAW). After welding, all cladded crucibles were evaluated with two kinds of leak testing, the helium leak test for minor leakage and the bubble test for major leakage. Due to the concern of the poor neutronics performance, Mo was not ideal for future moderator cladding application. Therefore, detailed characterization of the Mo cladded zirconium hydride was not pursued. Instead, the characterization of FeCrAl cladded zirconium hydride was performed. We discussed two material conditions (i.e., as machined and pre-oxidized conditions) prior to the cladding process, evaluated thermal stability of cladded zirconium hydride moderator through directly measuring hydrogen release, and characterized the zirconium hydride following the thermal desorption measurement. The results showed pre-oxidized FeCrAl is capable of efficiently preventing hydrogen release from the moderator assembly.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Bulk‐Heterojunction Electrocatalysts in Confined Geometry Boosting Stable, Acid/Alkaline‐Universal Water Electrolysis

Abstract Alkaline water splitting electrocatalysts have been studied for decades; however, many difficulties remain for commercialization, such as sluggish hydrogen evolution reaction (HER) kinetics and poor catalytic stability. Herein, by mimicking the bulk‐heterojunction morphology of conventional organic solar cells, a uniform 10 nm scale nanocube is reported that consists of subnanometer‐scale heterointerfaces between transition metal phosphides and oxides, which serves as an alkaline water splitting electrocatalyst; showing great performance and stability toward HER and oxygen evolution reaction (OER). Interestingly, the nanocube electrocatalyst reveals acid/alkaline independency from the synergistic effect of electrochemical HER (cobalt phosphide) and thermochemical water dissociation (cobalt oxide). From the spray coating process, nanocube electrocatalyst spreads uniformly on large scale (≈6.6 × 5.6 cm 2 ) and is applied to alkaline water electrolyzers, stably delivering 600 mA cm −2 current for >100 h. The photovoltaic‐electrochemical (PV‐EC) system, including silicon PV cells, achieves 11.5% solar‐to‐hydrogen (STH) efficiency stably for >100 h.

Chemistry↗