Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “microporous”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Effect of Sintering Atmosphere on the Synthesis Process, Electrical and Mechanical Properties of NiFe{sub 2}O{sub 4}/Nano-TiN Ceramics

NiFe{sub 2}O{sub 4}/nano-TiN ceramics were fabricated by a two-step cold-pressing sintering process. Effect of sintering atmosphere (air, nitrogen, argon) on the synthesis process of NiFe{sub 2}O{sub 4}/nano-TiN ceramics was investigated. The DSC-TG and XRD analysis results indicated that besides principal phases of NiO and NiFe{sub 2}O{sub 4}, new-phase Ni{sub 3}TiO{sub 5} formed in the sintered ceramics under the three sintering atmospheres, and metallic phase including iron and nickel appeared in the sintered samples with inert gas (nitrogen, argon) sintering condition. Microstructure analysis results showed that considerable quantity of micropores appeared in the ceramic samples sintered under inert gases (argon, nitrogen), but lower porosity (3.0, 3.6%) and higher densities (4.78 g/cm{sup 3}, 4.51 g/cm{sup 3}) can be obtained, comparing to the both values (14.4%, 4.17 g/cm{sup 3}) for the ceramic samples sintered under air atmosphere. Besides, the average bending strength and elastic modulus of the samples sintered under argon is 113.75 MPa and 7.13GPa, which is higher than that of 75.12 MPa, 5.42GPa and 91.96 MPa, 6.26GPa for the samples synthesized under air and nitrogen, separately. When changing sintering atmosphere from air to inert gases (argon, nitrogen), the fracture model of the 4 wt.%nano-TiN/NiFe{sub 2}O{sub 4} ceramics synthesized at 1400 °C for 4 h transformed from intergranular fracture to intergranular-transgranular fracture.

36 MATERIALS SCIENCE↗

Weld Quality Assessment in Fiber Laser Weldments of Ti-6Al-4V Alloy

Laser welding experiments are performed on Ti-6Al-4V alloy sheets by adopting fiber laser. A special kind of workpiece fixture is designed and fabricated for providing shielding gas. After experiments, penetration depth, fusion zone width and heat-affected zone size at different locations within weld bead are measured and discussed in detail. Influence of line energies on the formation of non-uniform microstructure within weld bead is explored by conducting microstructural analysis. Various kinds of microstructural morphology of martensitic structure such as α′ martensite, blocky α, massive α and basket-weave microstructure are found in fusion zone. Experimentally, it is found that beam power is the key parameter for controlling penetration depth. Higher hardness is noticed within fusion zone due to the existence of large volume of α′ martensite. Tensile strength and hardness of welded specimens are increased with decreasing line energy. Small amount of micropores are also found in solidified weld bead. However, its sizes are in acceptable range as per BSEN:4678 standard. Most favorable welding condition is identified as a combination of beam power of 800 W and welding speed of 1000 mm/min which yields full penetration, narrower bead width, small heat-affected zone, minimal defects and acceptable mechanical properties.

36 MATERIALS SCIENCE↗

Effect of Dual-Phase Heat Treatment on Microstructure and Mechanical Properties of S135 High-Strength Drill Pipe Steel

Effect of dual-phase heat treatment (DPHT) on microstructure and mechanical properties of S135 high-strength drill pipe steel was studied by means of optical microscope, scanning electron microscope and mechanical property testing. The results show that the ferrite–martensite dual-phase microstructures were obtained at 760-800 °C. With increase in DPHT temperature, the volume fraction of martensite increases and the ferrite decreases. When the DPHT temperature is low, martensite is distributed as an island on the ferrite matrix, and ferrite is distributed as an island on the martensite matrix when the DPHT temperature is high. The hardness and strength of the steel increase, the plasticity and toughness decrease, the steel changes from ductile fracture to brittle fracture and the micro-fracture morphology changes from dimple to cleavage with increase in DPHT temperature. The strain hardening exponent of the as-received steel shows one ‘n’ value, but exhibits two ‘n’ values after DPHT. When the DPHT temperature is 750 °C, the relative content of martensite in the duplex structure is 15-20%, and the impact energy of the steel is similar to that of the as-received S135 drill pipe steel, and the strength is increased by about 15%. Micropores and micro-cracks on the subsurface of tensile fracture surface are mainly formed at the martensite/ferrite phase boundary or in the martensite slit.

36 MATERIALS SCIENCE↗

Probing the Mechanical Performance of Micro-architected Porous Structures Through In Situ Characterization and Analysis

Micropores play critical roles in both natural and man-made materials. Such pores take on a variety of shapes and sizes ranging from spherical to irregular sphere-like voids with diameters spanning from the nanometer to millimeter scales. When porous structures are mechanically loaded, the pores direct the stress around their free surfaces, altering the material’s mechanical response relative to fully dense materials. In this study, for the first time, we create micro-architected porous samples using nanolithography and investigate the role of pore morphology by conducting a series of in situ micropillar compression tests in scanning electron microscopy. The findings demonstrate that porosity is the primary factor influencing the mechanical response of these micro-architected materials, as often seen on a macroscopic level. Additionally, we observed that pore geometry had a significant impact on Young’s modulus, yield stress, and strain energy density as a secondary parameter. Then, the extracted Young’s modulus was compared to macroscopic empirical models and determined the analytical models sufficiently described the impact of porosity in the microscopic scale but failed to capture the impact of second-order parameters. Furthermore, these results suggest how porous materials can be tailored to achieve desired mechanical properties based on the engineering applications of interest.

36 MATERIALS SCIENCE↗

Comparative Study of Flash and Acid Hydrolysis of Microalgae (Scenedesmus sp.) for the Recovery of Biochemicals and Production of Porous Biocarbon Nanosheets

An integrated biorefinery concept is a novel and economical process intensification methodology for efficient utilization of biomass components. In this research, microalgae (Scenedesmus sp.) slurry with biomass concentration of 8.5 wt.% was parallelly fractionated using two techniques: 'flash hydrolysis (FH)' and 'acid hydrolysis (AH)'. FH was performed at 240 degrees C with a residence time of 10 +/- 2 s in a continuous flow reactor, whereas AH was performed at 155 degrees C and reaction time of 15 min in a batch reactor. About 63% of microalgal biomass was solubilized in liquid hydrolysate through both FH and AH. However, AH had an advantage over FH in recovering microalgae proteins and carbohydrates. FAME recovery through solvent extraction from FH and AH derived wet solids (insoluble microalgae) was 40 and 63%, respectively. Finally, the FH- and AH-derived post extraction solid residue was thermally activated using K2CO3 to produce highly microporous biocarbon nanosheets with BET surface areas of 712 and 1289 m2 g-1, respectively. Overall, an integrated process was developed using two potential hydrolysis techniques to maximize utilization of microalgae components.

BASIC BIOLOGICAL SCIENCES,BIOMASS FUELS↗

Regulating the properties of activated carbon for supercapacitors: impact of particle size and degree of aromatization of hydrochar

Hydrochar (HC), obtained by the hydrothermal carbonization (HTC) of biomass, is an excellent precursor for preparing activated carbon (AC). However, the effects of the intrinsic properties of HC on the microstructure and electrochemical properties of AC are largely unknown. Here, this study investigates the impact of particle size and the degree of aromatization of in-situ HC on the microstructure and electrochemical properties of AC. Our results show that a large particle size and a high degree of aromatization help protect the HC from overactivation by ZnCl 2 , resulting in an large specific surface area (SSA > 2000 m 2 /g) and high mesopore to micropore volume ratio value ( V mes /V mic > 0.3) of the AC. Electrochemical performance measurements show a maximum specific capacitance of 218 F/g at 0.5 A/g was achieved in all samples where the AC (AC180-10 h) was prepared by activating HC180-10 h with a large size, a high degree of aromatization, and abundant surface oxygen-containing functional groups. After AC180-10 h was assembled into a supercapacitor, the specific capacitance of AC180-10 h still reached 158 F/g at 0.5 A/g, and it showed excellent cycling stability. This study advances the understanding of the impact of HC particle size and degree of aromatization on AC properties, providing new insights into tailoring HC qualities so that improving improve the properties of AC.

36 MATERIALS SCIENCE↗

3D polymer hydrogel for high-performance atomic iron-rich catalysts for oxygen reduction in acidic media

Current platinum group metal (PGM)-free carbon nanocomposite catalysts for the oxygen reduction reaction (ORR) in acidic electrolyte often suffer from rapid degradation associated with carbon corrosion due to the use of large amount of amorphoous carbon black supports. Here, we developed a new concept of using freestanding 3D hydrogel to design support-free Fe-N-C catalysts. A 3D polyaniline (PANI)-based hydrogel was used for preparing a new type of single atomic iron site-rich catalyst, which has exhibited exceptionally enhanced activity and stability compared to conventional Fe-N-C catalysts supported on amorphous carbon blacks. The achieved performance metric on the hydrogel PANI-Fe catalysts is one of the best ever reported PGM-free catalysts, reaching a half-wave potential up to 0.83 V vs. RHE and only leaving 30 mV gap with Pt/C catalysts (60 μgPt/cm2) in challenging acidic media. Remarkable ORR stability was accomplished as well on the same catalyst evidenced by using harsh potential cycling tests. The well dispersion of atomic iron into partially graphitized carbon, featured with dominance of micropores and porous network structures, is capable of accommodating increased number of active sites, strengthening local bonding among iron, nitrogen and carbon, and facilitating mass transfer. The 3D polymer hydrogel approach would be a new pathway to advance PGM-free catalysts.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Alkylation of lignin-derived aromatic oxygenates with cyclic alcohols on acidic zeolites

Moderately strong BAS and spacious microporous environments (i.e., large-pore acidic zeolites HBEA and HY) are important criteria for efficient alkylation of phenols with cyclic alcohols and alkenes, while very strong BAS appear to be responsible for catalyst deactivation. BAS confined in HBEA and HY pores show substantially higher turnover frequencies compared to solids without molecularly sized pore constraints. HBEA favors the formation of mono-alkylates, while enhanced formation of di-alkylates is observed on HY. Dehydration of alcohols always dominates over the alkylation at the onset of the reaction. Carbenium ions, the direct electrophile for aromatic oxygenates, are produced mainly from the adsorption and protonation of olefins. The present study shows that for the alkylation of phenols and cyclic alcohols in apolar liquids, the alcohol concentration should be kept low to avoid the formation of unreactive surface dimers and mitigate their inhibitory effects on olefin adsorption and protonation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A one-pot synthesis of high-density biofuels through bifunctional mesoporous zeolite-encapsulated Pd catalysts

Developing a powerful bifunctional catalyst for tandem reactions is essential to the future carbon neutrality by reducing the energy consumption in chemical industries. Herein, mesoporous zeolite-encapsulated palladium (Pd) nanoparticles (Pd@meso-ZSM-5) synthesized via emulsification-demulsification followed by a dry-gel transformation method were demonstrated to have a remarkable catalytic performance for a one-pot multiple tandem reaction of cyclic ketones (cyclopentanone, cyclohexanone) to bicyclic alkanes (bicyclopentane, bicyclohexane). Compared with supported catalysts (Pd/meso-ZSM-5) and microporous zeolite-encapsulated catalysts (Pd@ZSM-5) with a primary product of monocyclic alkane (cyclopentane, cyclohexane), Pd@meso-ZSM-5 shows much higher catalytic efficiency for the bicyclic alkanes synthesis, which was previously unattainable in the conventional two-step synthesis route. Controlled experiments and detailed characterizations show that mesoporosity provides sufficient space for the generation and diffusion of large molecular intermediates, and the intimate acid-Pd interface promotes the conversion of intermediates. As a result, this work proposes a design strategy for a mesoporous zeolite-encapsulated metal catalyst, which efficiently provides cooperative acid-hydrogenation catalysis.

09 BIOMASS FUELS↗

Steam explosion of oil palm residues for the production of durable pellets

Here we investigated the effect of steam explosion pretreatment on the physical and mechanical properties of the pellets made from empty fruit bunch (EFB) and palm kernel shell (PKS) and we compared to that of softwood Douglas fir (DF). We found that the high heating value of the empty fruit bunch was increased by 21% after steam explosion pretreatment. The pellet density of EFB and Douglas fir pellets did not change while the pellet density of PKS increased from 1.13 to 1.21 g/cm 3 after steam explosion. That may be attributed to the rapid volatilization of high mass fraction extractives during high pressure steaming and lead to the shrinkage of micropores of the PKS fibers. The maximum brealdng strength of steam exploded EFB and PKS were increased by 63% and 45%, respectively. The required compaction energy for the steam exploded EFB pellet is 44.50 J/g while that of the untreated EFB pellet is 30.15 J/g. Similar to Douglas fir, the required extrusion energy for the steam exploded EFB pellet was about 6 times than that of the untreated EFB pellet. The increased extrusion energy is mainly contributed by the increase in mono-saccharides by auto-hydrolysis during steam explosion pretreatment.

09 BIOMASS FUELS↗

Interfacial engineering via laser ablation for high-performing PEM water electrolysis

A rationalized interfacial design strategy was applied to tailor the porous transport layer (PTL)-catalyst layer (CL) contact and the PTL bulk-phase architecture. Particularly, at the PTL-CL interface, our results reveal that laser ablated sintered titanium power-based PTLs improve electrolyzer performance at both the H2NEW Consortium baseline catalyst loading of 0.4 mgIr cm -2 as well as at the ultra-low catalyst loading of 0.055 mgIr cm -2 . Under ultra-low catalyst loadings, the laser ablated PTL demonstrates maximum reduction of 230 mV compared to the commercial PTL at 4 A cm -2 , and reduces by 68 mV at 3.2 A cm -2 under H2NEW baseline loading. Laser ablation alters the titanium phase at the interface, so it forms more uniform structure like a microporous layer or a backing layer, leading to an increase in the surface area in contact with the catalyst layer while preventing the membrane from deforming into the PTL. Moreover, we reveal that bulk-phase architecture modification of the PTL by ablating patterned pores at the flow field-PTL interface improves mass transport without sacrificing contact at the CL-PTL interface. Overall, laser ablation of the PTL is an effective method to customize interfacial design to enhance proton exchange membrane electrolyzer performance.

08 HYDROGEN↗

Development of a conduction-based model for analyzing frozen startup of alkali-metal heat pipes

One key area of interest in heat pipe modeling/simulation is to analyze the startup behavior of the liquid-metal heat pipes (LMHPs) from a frozen state. This so-called ‘frozen startup’ process involves a complex set of nonlinear mass and heat transport phenomena, including phase transitions from solid to liquid and vapor, multiphase interactions, microporous wick flow, and compressible vapor dynamics. The complexity of these processes makes it challenging to simulate LMHP’s frozen startup using conventional numerical methods or commercial computational fluid dynamics (CFD) software. This paper presents a simplified conduction-based modeling approach that can provide practical insights into the entire LMHP frozen startup process, while alleviating the challenges of modeling its complex physics. The theoretical foundation and physical assumptions of the proposed model are based solely on heat-conduction equation, allowing for a more tractable simulation without sacrificing essential physical accuracy. The proposed model was implemented in a commercial CFD software, and its prediction was compared with the experimental data obtained from sodium heat-pipe startup experiments. The comparison highlights the proposed model's ability to capture the transient thermal behavior of LMHP during frozen startup. This study not only validates the conduction-based frozen startup modeling method but also shows its potential as a practical and efficient tool for understanding the startup performance of the LMHP systems.

Microreactor↗

Membrane Extraction for Detoxification of Biomass Hydrolysates

Membrane extraction was used for the removal of sulfuric acid, acetic acid, 5-hydroxymethyl furfural and furfural from corn stover hydrolyzed with dilute sulfuric acid. Microporous polypropylene hollow fiber membranes were used. The organic extractant consisted of 15% Alamine 336 in: octanol, a 50:50 mixture of oleyl alcohol:octanol or oleyl alcohol. Rapid removal of sulfuric acid, 5-hydroxymethyl and furfural was observed. The rate of acetic acid removal decreased as the pH of the hydrolysate increased. Regeneration of the organic extractant was achieved by back extraction into an aqueous phase containing NaOH and ethanol. A cleaning protocol consisting of flushing the hydrolysate compartment with NaOH and the organic phase compartment with pure organic phase enabled regeneration and reuse of the module. Ethanol yields from hydrolysates detoxified by membrane extraction using 15% Alamine 336 in oleyl alcohol were about 10% higher than those from hydrolysates detoxified using ammonium hydroxide treatment.

09 BIOMASS FUELS↗

Single Pd atoms in activated carbon fibers and their contribution to hydrogen storage

Palladium-modified activated carbon fibers (Pd-ACF) were synthesized by meltspinning, carbonization and activation of an isotropic pitch carbon precursor premixed with an organometallic Pd compound. The hydrogen uptake at 25 oC and 20 bar on Pd- ACF exceeded the expected capacity based solely on Pd hydride formation and hydrogen physisorption on the microporous carbon support. Aberration-corrected scanning transmission electron microscopy (STEM) with sub- ngstrom spatial resolution provided unambiguous identification of isolated Pd atoms occurring in the carbon matrix that coexist with larger Pd particles. First principles calculations revealed that each single Pd atom can form Kubas-type complexes by binding up to three H2 molecules in the pressure range of adsorption measurements. Based on Pd atom concentration determined from STEM images, the contribution of various mechanisms to the excess hydrogen uptake measured experimentally was evaluated. With consideration of Kubas binding as a viable mechanism (along with hydride formation and physisorption to carbon support) the role of hydrogen spillover in this system may be smaller than previously thought.

08 HYDROGEN↗

Structure and hydrogen adsorption properties in low density nanoporous carbons from simulations

We systematically model the hydrogen adsorption in nanoporous carbons over a wide range of carbon bulk densities (0.6 - 2.4 g/cm3) by using tight binding molecular dynamics simulations for the carbon structures and thermodynamics calculations of the hydrogen adsorption. The resulting structures are in good agreement with the experimental data of ultra-microporous carbon (UMC), a wood-based activated carbon, as indicated by comparisons of the microstructure at atomic level, pair distribution function, and pore size distribution. The hydrogen adsorption calculations in carbon structures demonstrate both a promising hydrogen storage capacity (excess uptake of 1.33 wt% at 298K and 5 MPa, for carbon structures at the lower range of densities) and a reasonable heat of adsorption (12-22 kJ/mol). This work demonstrates that increasing the heat of adsorption does not necessarily increase the hydrogen uptake. In fact, the available adsorption volume is as important as the isosteric heat of adsorption for hydrogen storage in nanoporous carbons.

08 HYDROGEN↗

New insights into structural evolution in carbon molecular sieve membranes during pyrolysis

Carbon molecular sieve (CMS) membranes separate penetrants using size and shape-selective pores. Here, we report pyrolysis of a 6FDA:BPDA-DAM polyimide precursor between 500 and 800 °C and measure gas evolution during the CMS structural development. The CMS materials were then characterized using combined transport properties, porosimetry, FTIR, Raman spectroscopy, TGA-FTIR, WARD, and elemental analysis measurements to assess their resulting physical and chemical properties. The results support a previous vision that fragmentation of the polyimide precursor occurs to form aromatic strands that provide building blocks for the overall CMS cell structure. This fact notwithstanding, these new findings determine that constituent strands appear to be more complicated than previously suggested. An ordering process of such strands can generate a bimodal morphology comprising larger micropores with irregular cell walls containing ultramicropores. Permeability and permselectivity of the CMS for the C 2 H 4 /C 2 H 6 pair are also correlated with CMS structures based on the above characterizations. The results of this work suggest that molecular probe-based transport measurements are by far the most useful tools to study these complex, amorphous materials for molecular separation applications.

36 MATERIALS SCIENCE↗

Porosity in nuclear graphite and its impact on nuclear reactor science and criticality safety applications

Porosity in nuclear-grade graphite significantly influences its low-energy neutron scattering, yet its effect on underlying phonon properties remains debated. Here, this work integrates inelastic and small-angle neutron scattering (INS/SANS) experiments, advanced atomistic simulations with a novel machine-learned potential (DeepMD), total cross-section measurements, and neutronics calculations (SCALE, MCNP, OpenMC) to investigate porosity’s impact on neutron thermalization. INS measurements on diverse graphite grades reveal no discernible porosity effect on phonon spectra, which align with crystalline graphite. Conversely, total cross-section data below ≈10 meV show increased scattering attributable to SANS. Our DeepMD simulations demonstrate that realistic micropores do not distort phonon spectra, challenging the assumptions in current ENDF/B-VIII.1 porosity thermal scattering laws (TSLs). These TSLs, based on random atom removal, produce unphysical phonon spectra and inflate inelastic cross-sections. Augmenting a crystalline TSL with an SANS component accurately captures experimental total cross-sections. Neutronics benchmarks (ICSBEP/IRPhE) show ENDF porosity TSLs unphysically increase neutron multiplication factor, keff. Crucially, incorporating SANS physics (NCrystal/OpenMC) indicates accurately modeled porosity negligibly affects keff, reactor physics, or criticality safety.

Critical benchmarks↗

Studying Two-Dimensional Zeolites with the Tools of Surface Science: MFI Nanosheets on Au(111)

While surface science has provided fundamental insights into a variety a materials, the most used catalysts in the industry, namely zeolites, still remain a challenge. The recent preparation of two-dimensional versions of MFI zeolite frameworks and the possibility of their deposition on electrically conductive supports provides for the first time a viable strategy to perform detailed studies on industrially relevant zeolites using the vast toolkit of surface science. In this work we demonstrate the use of infrared reflection absorption spectroscopy (IRRAS) and synchrotron-based x-ray photoelectron spectroscopy (XPS) to study these materials. Furthermore, polarization modulation IRRAS is used to study the adsorption of methanol and its effect in phonon vibrations of the zeolite framework. The possibility of using surface science methods, in particular under ambient pressure conditions, for the study of well-defined zeolites and other microporous structures opens new avenues to understand structural and mechanistic aspects of these materials as catalysts, adsorbents and molecular sieves.

77 NANOSCIENCE AND NANOTECHNOLOGY↗