Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Statistical error”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

A statistical study of radio-source structure effects on astrometric very long baseline interferometry observations

Errors from a number of sources in astrometric very long baseline interferometry (VLBI) have been reduced in recent years through a variety of methods of calibration and modeling. Such reductions have led to a situation in which the extended structure of the natural radio sources used in VLBI is a significant error source in the effort to improve the accuracy of the radio reference frame. In the past, work has been done on individual radio sources to establish the magnitude of the errors caused by their particular structures. The results of calculations on 26 radio sources are reported in which an effort is made to determine the typical delay and delay-rate errors for a number of sources having different types of structure. It is found that for single observations of the types of radio sources present in astrometric catalogs, group-delay and phase-delay scatter in the 50 to 100 psec range due to source structure can be expected at 8.4 GHz on the intercontinental baselines available in the Deep Space Network (DSN). Delay-rate scatter of approx. 5 x 10(exp -15) sec sec(exp -1) (or approx. 0.002 mm sec (exp -1) is also expected. If such errors mapped directly into source position errors, they would correspond to position uncertainties of approx. 2 to 5 nrad, similar to the best position determinations in the current JPL VLBI catalog. With the advent of wider bandwidth VLBI systems on the large DSN antennas, the system noise will be low enough so that the structure-induced errors will be a significant part of the error budget. Several possibilities for reducing the structure errors are discussed briefly, although it is likely that considerable effort will have to be devoted to the structure problem in order to reduce the typical error by a factor of two or more.

Ulvestad, J. S.↗

Filter Tuning Using the Chi-Squared Statistic

The Goddard Space Flight Center (GSFC) Flight Dynamics Facility (FDF) performs orbit determination (OD) for the Aqua and Aura satellites. Both satellites are located in low Earth orbit (LEO), and are part of what is considered the A-Train satellite constellation. Both spacecraft are currently in the science phase of their respective missions. The FDF has recently been tasked with delivering definitive covariance for each satellite.The main source of orbit determination used for these missions is the Orbit Determination Toolkit developed by Analytical Graphics Inc. (AGI). This software uses an Extended Kalman Filter (EKF) to estimate the states of both spacecraft. The filter incorporates force modelling, ground station and space network measurements to determine spacecraft states. It also generates a covariance at each measurement. This covariance can be useful for evaluating the overall performance of the tracking data measurements and the filter itself. An accurate covariance is also useful for covariance propagation which is utilized in collision avoidance operations. It is also valuable when attempting to determine if the current orbital solution will meet mission requirements in the future.This paper examines the use of the Chi-square statistic as a means of evaluating filter performance. The Chi-square statistic is calculated to determine the realism of a covariance based on the prediction accuracy and the covariance values at a given point in time. Once calculated, it is the distribution of this statistic that provides insight on the accuracy of the covariance.For the EKF to correctly calculate the covariance, error models associated with tracking data measurements must be accurately tuned. Over estimating or under estimating these error values can have detrimental effects on the overall filter performance. The filter incorporates ground station measurements, which can be tuned based on the accuracy of the individual ground stations. It also includes measurements from the NASA space network (SN), which can be affected by the assumed accuracy of the TDRS satellite state at the time of the measurement.The force modelling in the EKF is also an important factor that affects the propagation accuracy and covariance sizing. The dominant force in the LEO orbit regime is the drag force caused by atmospheric drag. Accurate accounting of the drag force is especially important for the accuracy of the propagated state. The implementation of a box and wing model to improve drag estimation accuracy, and its overall effect on the covariance state is explored.The process of tuning the EKF for Aqua and Aura support is described, including examination of the measurement errors of available observation types (Doppler and range), and methods of dealing with potentially volatile atmospheric drag modeling. Predictive accuracy and the distribution of the Chi-square statistic, calculated based of the ODTK EKF solutions, are assessed versus accepted norms for the orbit regime.

Covariance Analysis↗

Analysis of AVHRR, CZCS and historical in situ data off the Oregon Coast

The original scientific objectives of this grant were to: (1) characterize the seasonal cycles and interannual variability for phytoplankton concentrations and sea surface temperature (SST) in the California Current using satellite data; and (2) to explore the spatial and temporal relationship between these variables and surface wind forcing. An additional methodological objective was to develop statistical methods for forming mean fields, which minimize the effects of random data gaps and errors in the irregularly sampled CZCS (Coastal Zone Color Scanner) and AVHRR (Advanced Very High Resolution Radiometer) satellite data. A final task was to evaluate the level of uncertainty in the wind fields used for the statistical analysis. Funding in the first year included part of the cost of an image processing system to enable this and other projects to process and analyze satellite data. This report consists of summaries of the major projects carried out with all or partial support from this grant. The appendices include a list of papers and professional presentations supported by the grant, as well as reprints of the major papers and reports.

Strub, P. Ted↗

Accuracy assessment in the Large Area Crop Inventory Experiment

The Accuracy Assessment System (AAS) of the Large Area Crop Inventory Experiment (LACIE) was responsible for determining the accuracy and reliability of LACIE estimates of wheat production, area, and yield, made at regular intervals throughout the crop season, and for investigating the various LACIE error sources, quantifying these errors, and relating them to their causes. Some results of using the AAS during the three years of LACIE are reviewed. As the program culminated, AAS was able not only to meet the goal of obtaining accurate statistical estimates of sampling and classification accuracy, but also the goal of evaluating component labeling errors. Furthermore, the ground-truth data processing matured from collecting data for one crop (small grains) to collecting, quality-checking, and archiving data for all crops in a LACIE small segment.

Houston, A. G.↗

Correlation techniques to determine model form in robust nonlinear system realization/identification

The fundamental challenge in identification of nonlinear dynamic systems is determining the appropriate form of the model. A robust technique is presented which essentially eliminates this problem for many applications. The technique is based on the Minimum Model Error (MME) optimal estimation approach. A detailed literature review is included in which fundamental differences between the current approach and previous work is described. The most significant feature is the ability to identify nonlinear dynamic systems without prior assumption regarding the form of the nonlinearities, in contrast to existing nonlinear identification approaches which usually require detailed assumptions of the nonlinearities. Model form is determined via statistical correlation of the MME optimal state estimates with the MME optimal model error estimates. The example illustrations indicate that the method is robust with respect to prior ignorance of the model, and with respect to measurement noise, measurement frequency, and measurement record length.

Stry, Greselda I.↗

Assessing the Viability of Using GEOS-Forecast Product for Landslides Forecasting: A Step Toward Early Warning System

Landslides across the globe are mostly triggered by extreme rainfall events affecting infrastructure, transportation and livelihoods. The risks are rarely quantified due to lack of data, analytical skills and limited modeling techniques. Knowledge of local to global scale landslide risks provides communities and national agencies the ability to adapt disaster management practices to mitigate and recover from these hazards. In order to minimize the risks and improve characterization of community resilience to landslides, it is vital to have reliable information about the factors triggering landslides such as rainfall, well ahead in time. Forecasting potential landslide activity and impacts can be achieved through reliable precipitation forecast models. However, it is challenging because of the temporal and spatial variability of precipitation, an important factor in triggering landslides. Evaluation of the precipitation field, associated errors, and sampling uncertainties is integral for development of efficient and reliable landslide forecasting and early warning system. This study develops a methodology to assess the viability of using a precipitation field provided by a global model and its potential integration in the landslide forecasting system. The study focuses on the comparison between the IMERG (Integrated Multi-satellitE Retrievals for Global Precipitation Mission) and GEOS (NASA Goddard Earth Observing System)-Forecast product over contiguous United States (CONUS). GEOS model assimilates new observations every 6 hours, at 00, 06, 12, and 18 UTC. The framework is tested on the GEOS-Forecast Model initialized at 00 UTC using daily IMERG early product as reference using both categorical and continuous statistics. The categorical statistics includes the probability of detection (POD), success ratio (SR), critical success index (CSI), and the hit bias. Continuous statistics such as correlation, normalized standard deviation, and root-mean-square error are also evaluated. Overall, GEOS-Forecast precipitation field over the analysis period (~1 year) show underestimation with respect to IMERG early for the daily accumulated rainfall. However, the probability distribution function and cumulative distribution function of both show similar patterns. In terms of correlations, POD, SR, CSI, hit bias, the performance varies with respect to the rainfall threshold used.

Sana Khan↗

An Investigation Into Possible Systematic Effects on Neutron Star Radius Estimates using NICER-like Synthetic Data

Neutron star cores contain the densest matter in the observable universe. The state of this matter is of interest in numerous fields, but laboratory experiments cannot explore this matter. Although the composition of the matter would be of great interest, macroscopic observables such as the neutron star mass-radius relation depend primarily on the equation of state (EOS). As a result, precise and reliable radius measurements would be valuable in constraining the EOS. However, most attempts at radius measurements are susceptible to systematic errors, meaning the inferred radius can be significantly biased even though the fit to the data appears to be statistically good. Previous studies suggested that radii inferred using X-ray data provided by NASA’s NICER mission may be more immune from such systematic errors. This is in part because, compared with previous measurements that obtained averaged spectra and fluxes, NICER observes millisecond pulsars by timing the photons so precisely, it is possible to obtain the spectrum as a function of rotational phase and see variations such as heated regions on the star rotate into and out of view hundreds of times per second. This extra information seems promising to break degeneracies and mitigate systematic errors, but a more in-depth study is necessary. We report the first steps of that study, in which we generate NICER-like synthetic data and determine the quality of fit and bias in radius obtained when we fit the data using a model different from the model used to generate the data.

Isiah Holt↗

High-Accuracy Surface Figure Measurement of Silicon Mirrors at 80 K

This report describes the equipment, experimental methods, and first results at a new facility for interferometric measurement of cryogenically-cooled spherical mirrors at the Goddard Space Flight Center Optics Branch. The procedure, using standard phase-shifting interferometry, has an standard combined uncertainty of 3.6 nm rms in its representation of the two-dimensional surface figure error at 80, and an uncertainty of plus or minus 1 nm in the rms statistic itself. The first mirror tested was a concave spherical silicon foam-core mirror, with a clear aperture of 120 mm. The optic surface was measured at room temperature using standard absolute techniques; and then the change in surface figure error from room temperature to 80 K was measured. The mirror was cooled within a cryostat. and its surface figure error measured through a fused-silica window. The facility and techniques will be used to measure the surface figure error at 20K of prototype lightweight silicon carbide and Cesic mirrors developed by Galileo Avionica (Italy) for the European Space Agency (ESA).

Blake, Peter↗

An auditory display in a dual-axis tracking task.

Results of a study in which subjects were presented concurrently with the primary task of controlling a second-order plant and the secondary task of controlling a first-order plant. The plant errors for the two tasks were shown on separate visual displays. An auditory display, whose output varied in frequency and volume with the error, was used to supplement the secondary task in half of the runs. To study the effects of the auditory display, two performance measures were obtained: (1) the integral of the squared error (ISE) and (2) the describing functions of the human operator. Statistical analysis of the ISE measures indicated that when the secondary task was supplemented with an auditory display, there was a significant improvement in performance on the secondary task. The performance on the primary task improved on the average, but not significantly. The variances of the ISE values decreased for both the tasks, indicating a more consistent behavior with the auditory display. The describing function analysis showed that supplementing the secondary task with the auditory display increased the low frequency gain of the human operator for this task. The describing functions for the primary task did not show any apparent changes.

Mirchandani, P. B.↗

Verification of redundancy management design

Statistical method checks designs by simulating system operating conditions and adding error factors. Method has potential applicability to commercial and industrial situations where redundancy management system is used to detect and isolate failed components.

Gelderloos, H. C.↗

A highly accurate method for the determination of mass and center of mass of a spacecraft

An extremely accurate method for the measurement of mass and the lateral center of mass of a spacecraft has been developed. The method was needed for the Voyager spacecraft mission requirement which limited the uncertainty in the knowledge of lateral center of mass of the spacecraft system weighing 750 kg to be less than 1.0 mm (0.04 in.). The method consists of using three load cells symmetrically located at 120 deg apart on a turntable with respect to the vertical axis of the spacecraft and making six measurements for each load cell. These six measurements are taken by cyclic rotations of the load cell turntable and of the spacecraft, about the vertical axis of the measurement fixture. This method eliminates all alignment, leveling, and load cell calibration errors for the lateral center of mass determination, and permits a statistical best fit of the measurement data. An associated data reduction computer program called MASCM has been written to implement this method and has been used for the Voyager spacecraft.

Chow, E. Y.↗

Estimation of the accuracy of dynamic flight-determined coefficients

This paper discusses means of assessing the accuracy of maximum likelihood parameter estimates obtained from dynamic flight data. The commonly used analytical predictors of accuracy are compared from both statistical and simplified geometric standpoints. Emphasizing practical considerations, such as modeling error, the accuracy predictions are evaluated with real and simulated data. Improved computations of the Cramer-Rao bound to correct large discrepancies caused by colored noise and modeling error are presented. This corrected Cramer-Rao bound is the best available analytical predictor of accuracy. Engineering judgement, aided by such analytical tools, is the final arbiter of accuracy estimation.

Maine, R. E.↗

Inventory estimation on the massively parallel processor

This paper describes algorithms for efficiently computing inventory estimates from satellite based images. The algorithms incorporate a one dimensional feature extraction which optimizes the pairwise sum of Fisher distances. Biases are eliminated with a premultiplication by the inverse of the analytically derived error matrix. The technique is demonstrated with a numerical example using statistics obtained from an actual Landsat scene. Attention was given to implementation of the Massively Parallel processor (MPP). A timing analysis demonstrates that the inventory estimation can be performed an order of magnitude faster on the MPP than on a conventional serial machine.

Argentiero, P. D.↗

An error analysis of basic kinematic quantities

A description is presented of the computational procedures used to obtain spatial fields of relative vorticity, advection of vorticity, horizontal divergence, and vertical motion. An investigation is conducted of the effectiveness of these procedures to reduce the effects of deliberately introduced random errors, giving attention to the confidence which can be placed on values of the derived parameters. It is concluded that fields of 500 mb vorticity and 700 mb vertical velocity, which are frequently used in synoptic scale forecasting schemes, show minimal effects of the deliberately introduced errors. Vorticity advection is found to be the most sensitive term to input data errors. Large fluctuations in fields of this parameter are evident both statistically and qualitatively.

Berecek, E. M.↗

LANDSAT-4 MSS interband registration

Interband registration on raw LANDSAT-4 MSS data was measured in the four MSS bands of the Mistassini, Quebec scene (path-row 16-24, June 21, 1983). Statistical comparison between line-pixel locations of uniformly distributed ground control points in the four different bands permitted quantitative measures of the offset over the entire scene. The statistical distribution of the offset measures permitted evaluation of the standard error on the mean values, giving confidence on their precision. Results obtained using a manual ground control point done on a digital image correction system and those obtained using digital band-to-band correlation adapted from a digital stereographic correlation algorithm are tabulated. The pixel misrepresentation values obtained are compared with published NASA figures.

Grieve, G.↗

Studies of lightning data in conjunction with geostationary satellite data

The archiving of a more complete data base to perform lightning studies is outlined. This effort includes: (1) continued archiving of bureau of land management LLP, geostationary satellite, and NWS radar data; (2) expansion of the McIDAS real-time LLP access to other networks. Additional processing tools for display and analysis of lightning location data in conjunction with geostationary satellite data are developed which entails adapting existing McIDAS software to allow the production of statistical summaries and contouring of lightning characteristics over user defined areas or storms. The plotting of three dimensional displays of lightning statistics versus satellite and radar data, and the performance of an error analysis of lightning location data using overlapping regions of the BLM network are discussed.

Suchman, D.↗

Statistical structure of convective periods derived from satellite ground based data

The documentation of characteristics of Vertical Atmospheric Soundings (VAS) through the use of statistical structure and correlation functions is presented. A measure of random error is also provided. Rawinsonde data from various periods is analyzed. Structure and correlation functions are used to compare VAS retrievals obtained using a physical algorithm with those from a regression technique. Results from both procedures are evaluated against those from a mesoscale network of rawinsonde stations. The parameters documented include temperature, mixing ratio, geopotential height, thickness, and precipitable water. Calculation are performed at several layers in the lower and upper troposphere.

Meyer, P. J.↗

Modeling the interactions between the ocean and the environment for microwave radar sensing

An extensive set of X-band microwave backscatter measurements has been analyzed to determine its dependence on winds near the surface, atmospheric stability, and long-wave slopes. These radar measurements, made from a tower in the Gulf of Mexico, were performed in conjunction with an extensive set of simultaneous environmental measurements. The CW microwave system operated at an incidence angle of 45 deg, with antennas directed into winds and waves. Model functions for the radar cross section (RCS) and the modulation transfer function (MTF) are developed that depend on the geophysical variables, including wind stress. Statistical analysis shows that these models functions yield a significant smaller error when fit to the RCS data than a simple wind-speed function displays. A Taylor-series expansion of the returned power from a small area provides a unified function that demonstrates the complementary roles of wave slope and atmospheric fluctuations on both the RCS, the MTF, and the coherence. The issue of linearity of the MTF is addressed with this data set, yielding evidence that this is a valid assumption. These results have direct application to the remote sensing of the mean and fluctuating winds, and the wave spectrum with coherent and incoherent active radars.

Weissman, David E.↗