Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Precise”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

High precision tide spectroscopy

Diurnal and long period earth tides were measured to high accuracy and precision with the superconducting gravimeter. The results provide new evidence on the geophysical questions which have been attacked through earth tide measurements in the past. In addition, they raise new questions of potential interest. Slow fluctuations in gravity of order 10 micron gal over periods of 3 to 5 months were observed and are discussed.

Goodkind, J. M.↗

Precise terrestrial time: A means for improved ballistic missile guidance analysis

An approach developed to improve the ground instrumentation time tagging accuracy and adapted to support the Minuteman ICBM program is desired. The Timing Insertion Unit (TIU) technique produces a telemetry data time tagging resolution of one tenth of a microsecond, with a relative intersite accuracy after corrections and velocity data (range, azimuth, elevation and range rate) also used in missile guidance system analysis can be correlated to within ten microseconds of the telemetry guidance data. This requires precise timing synchronization between the metric and telemetry instrumentation sites. The timing synchronization can be achieved by using the radar automatic phasing system time correlation methods. Other time correlation techniques such as Television (TV) Line-10 and the Geostationary Operational Environmental Satellites (GEOS) terrestial timing receivers are also considered.

Ehrsam, E. E.↗

A modular multiple use system for precise time and frequency measurement and distribution

A modular CAMAC based system is described which was developed to meet a variety of precise time and frequency measurement and distribution needs. The system was based on a generalization of the dual mixer concept. By using a 16 channel 100 ns event clock, the system can intercompare the phase of 16 frequency standards with subpicosecond resolution. The system has a noise floor of 26 fs and a long term stability on the order of 1 ps or better. The system also used a digitally controlled crystal oscillator in a control loop to provide an offsettable 5 MHz output with subpicosecond phase tracking capability. A detailed description of the system is given including theory of operation and performance. A method to improve the performance of the dual mixer technique is discussed when phase balancing of the two input ports cannot be accomplished.

Reinhardt, V. S.↗

LMC X-1, X-2, and X-3 - Precise positions from the HEAO 1 modulation collimator

Precise (to about 20 arcsec) positions are reported for the Large Magellanic Cloud X-ray sources LMC X-1, X-2, and X-3, determined with the HEAO 1 scanning modulation collimator. The error regions for LMC X-1 and X-3 contain, respectively, the B5 supergiant R148 and a possibly variable B III-IV star. Spectra taken of the latter confirm the spectral type and show that it is a member of the LMC. A search for a previously reported extended component of LMC X-1 yields upper limits which exclude it.

Johnston, M. D.↗

Precision filament cutter

Automated cutter precisely chops filaments of glass, graphite, plastic, and other materials into fibers for use in composites and other applications. Cutter uses movable blade that is pushed and pulled across fixed blade. Because mass of movable blade is small and stroke is short, operation is fast, and wear and energy consumption are low. Blade cuts on both forward and return movements. Operator selects fiber length and chopping rate. After each cut, blast of air blows filament away so it can be collected.

Mchatton, A. D.↗

Precise relative location estimation from satellite laser observations

Laser data from the Greenbelt, Bermuda, and Grand Turk Island tec tracking stations, and from observation at Patrick Air Force Base were used in an experiment to determine precise inter-station baselines and relative heights in short orbital arcs of no more than 12 minutes duration. The relative locations obtained are sensitive to reasonable variations in the gravity field to less than 15 cm in inter-station baseline and less than 35 cm in relative height. The formal standard deviations for range measurements at the observed 7 cm noise level are less than 10 cm for either baseline or relative height determinations from the twenty-arc combination solution. The method of data analysis is described, the baseline and relative height results are presented, and gravity model dependence is considered.

Dunn, P. J.↗

Precise determination of the distances of galaxies

The use of the Space Telescope in the determination of the distances of galaxies is examined. The Space Telescope can check the local extragalactic distance scale to within 10-15 percent. The determination of relative distances of cosmic standard candles, viz. brightest M-supergiants and SNe I in E galaxies, is discussed. The M-supergiants map the velocity field out to v sub o approx. 3000 km s(-1) thus providing a firm basis for the determination of H sub o (global) from local distances, and the possibility to derive precise distances of all nearby field galaxies from their recession velocities. Photometry of the SNe I out to z = 0.5 leads to a direct determination of q sub o via the Hubble diagram, and the form of their light curves offers a fundamental test on the nature of redshifts. Other calculations are discussed.

Tammann, G. A.↗

Shuttle orbit IMU alignment. Single-precision computation error

The source of computational error in the inertial measurement unit (IMU) onorbit alignment software was investigated. Simulation runs were made on the IBM 360/70 computer with the IMU orbit alignment software coded in hal/s. The results indicate that for small IMU misalignment angles (less than 600 arc seconds), single precision computations in combination with the arc cosine method of eigen rotation angle extraction introduces an additional misalignment error of up to 230 arc seconds per axis. Use of the arc sine method, however, produced negligible misalignment error. As a result of this study, the arc sine method was recommended for use in the IMU onorbit alignment software.

Mcclain, C. R.↗

A precision bearing gimbal system for the Teal Ruby program

A precision bearing gimbal system designed to allow a spaceborne infrared sensor to stare at points on the Earth while in orbit is described. The problems encountered, analytical tools and test methods used, and data applicable to users of similar systems are presented. Assembly procedures, bearing preload effects, moisture control, structural analysis, and noise control are specifically examined.

Lowry, C. H.↗

Analytical methodology for determination of helicopter IFR precision approach requirements

A systematic analytical approach to the determination of helicopter IFR precision approach requirements is formulated. The approach is based upon the hypothesis that pilot acceptance level or opinion rating of a given system is inversely related to the degree of pilot involvement in the control task. A nonlinear simulation of the helicopter approach to landing task incorporating appropriate models for UH-1H aircraft, the environmental disturbances and the human pilot was developed as a tool for evaluating the pilot acceptance hypothesis. The simulated pilot model is generic in nature and includes analytical representation of the human information acquisition, processing, and control strategies. Simulation analyses in the flight director mode indicate that the pilot model used is reasonable. Results of the simulation are used to identify candidate pilot workload metrics and to test the well known performance-work-load relationship. A pilot acceptance analytical methodology is formulated as a basis for further investigation, development and validation.

Phatak, A. V.↗

Microwave tunable laser source: A stable, precision tunable heterodyne local oscillator

The development and capabilities of a tunable laser source utilizing a wideband electro-optic modulator and a CO2 laser are described. The precision tunability and high stability of the device are demonstrated with examples of laboratory spectroscopy. Heterodyne measurements are also presented to demonstrate the performance of the laser source as a heterodyne local oscillator. With the use of five CO2 isotope lasers and the 8 to 18 GHz sideband offset tunability of the modulator, calculations indicate that 50 percent spectral coverage in the 9 to 12 micron region is achievable. The wavelength accuracy and stability of this laser source is limited by the CO2 laser and is more than adequate for the measurement of narrow Doppler-broadened line profiles. The room-temperature operating capability and the programmability of the microwave tunable laser source are attractive features for its in-the-field implementation. Although heterodyne measurements indicated some S/N degradation when using the device as a local oscillator, there does not appear to be any fundamental limitation to the heterodyne efficiency of this laser source. Through the use of a lower noise-figure traveling wave tube amplifier and optical matching of the output beam with the photomixer, a substantial increase in the heterodyne S/N is expected.

Sachse, G. W.↗

A precise position and optical identification for 4U 2129+47 - X-ray heating and a 5.2 hour binary period

A precise (20 arcsec) position and an optical counterpart are presented for the weak X-ray source 4U 2129+47. The optical counterpart shows weak but distinct He II 4686-A and C III-N III 4640-4650-A emission. Both H-beta and Ca II H and K are sometimes visible in absorption. Numerous plates and spectrophotometric observations from the 1978 observing season show that the blue magnitude varies from 16.7 to 18.0 in a period of 5.2382 hours. The light curve is sinusoidal in appearance, but with sharply defined V-shaped minima. It is proposed that most of the optical emission from this system originates at the X-ray heated face of the normal star and hence that this system is analogous to HZ Her/Her X-1. This is one of the few intrinsically faint optical counterparts of X-ray sources that show clear evidence of binary nature. The observations suggest a distance of 1.2-1.6 kpc for the source, and a consequent X-ray luminosity of approximately 10 to the 34.8 ergs/s.

Thorstensen, J.↗

Precise positions and optical search for the 38 second X-ray pulsar near OAO 1653-40 and upper limit on X-ray emission from V861 Scorpii

The region of the binary system V861 Scorpii, whose secondary has been suggested as a black hole candidate, was observed with the HEAO 1 X-ray observatory during an 8-hour pointed observation on September 4, 1978. An upper limit of 1.0 micro Jy (within three standard deviations) is placed on X-ray emission from V861 Sco during this observation. This effectively removes the secondary from the list of black hole candidates. The presence of a 38 sec pulsar in the region is confirmed, precise (0.63 sq arcmin) positions are given, and a search for the optical counterpart is described.

Armstrong, J. T.↗

Precise leveling, space geodesy and geodynamics

The implications of currently available leveling data on understanding the crustal dynamics of the continental United States are investigated. Neotectonic deformation, near surface movements, systematic errors in releveling measurements, and the implications of this information for earthquake prediction are described. Vertical crustal movements in the vicinity of the 1931 Valentine, Texas, earthquake which may represent coseismic deformation are investigated. The detection of vertical fault displacements by precise leveling in western Kentucky is reported. An empirical basis for defining releveling anomalies and its implications for crustal deformation in southern California is presented. Releveling measurements in the eastern United States and their meaning in the context of possible crustal deformation, including uplift of the Appalachian Mountains, eastward tilting of the Atlantic Coastal Plain, and apparent movements associated with a number of structural features along the east coast, are reported.

Reilinger, R.↗

Precise time technology for selected Air Force systems: Present status and future requirements

Precise time and time interval (PTTI) technology is becoming increasingly significant to Air Force operations as digital techniques find expanded utility in military missions. Timing has a key role in the function as well as in navigation. A survey of the PTTI needs of several Air Force systems is presented. Current technology supporting these needs was reviewed and new requirements are emphasized for systems as they transfer from initial development to final operational deployment.

Yannoni, N. F.↗