Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

In situ deformation of antigorite-olivine two-phase mixtures: Implications for dynamics and seismic anisotropy in the mantle wedge

Water released from hydrous minerals in subducting slabs reacts with the overlying plate, resulting in widespread serpentinization in the mantle wedge. Deformation of serpentinized peridotites has been invoked to explain forearc seismic anisotropy, yet studies of the mechanical properties and deformation behaviors of serpentine-bearing multiphase aggregates remain limited. Here we deformed olivine-antigorite mixtures containing 70, 50, and 20 vol.% of antigorite at 2.5 – 7.6 GPa, 673 K and strain rates of ∼10 –5 –10 –4 s –1 . Elasto-viscoplastic self-consistent simulations, constrained by synchrotron X-ray diffraction (XRD) data, were used to estimate lattice strain, stress–strain partitioning, crystallographic preferred orientations (CPO) development, and aggregate strength. Selected run products were also analyzed by electron backscatter diffraction for comparison with the CPO results obtained from XRD experiments. We found olivine transitions from A- or B-type to C-type when antigorite fraction drops to 20 vol.%, coinciding with a microstructural change from interconnected weak layers to a load-bearing framework (LBF). An additional run on a sample Atg50/Ol50 with preexisting microstructures suggested the formation of LBF was promoted by these microstructures, although the preexisting antigorite CPO has been overprinted at 20.8 % strain and could be erased completely by subsequent deformation in nature. Estimated viscosity of the two-phase mixtures suggests that low-degree serpentinization (≤20 %) in the mantle wedge may increase the strength of olivine-rich peridotite and hinder slab-mantle decoupling, whereas high-degree serpentinization (≥50–70 %) weakens the peridotite and favors decoupling if sufficient viscosity contrast (>10) develops. Seismic anisotropy shows a nonlinear dependence on antigorite fraction: antigorite CPO governs the anisotropy of the mixtures with ≥50 vol.% antigorite, whereas olivine CPO dominates at low fractions (∼20 vol.%). The presence of pre-existing microstructures reduces seismic anisotropy of the deformed mixtures, however the persistence of pre-existing CPO in actively subducting slabs remains uncertain, making their significance over geological timescales questionable.

Crystallographic preferred orientation↗
DOE OSTI2022

Practical Event Location Estimation Algorithm for Power Transmission System Based on Triangulation and Oscillation Intensity

Event location in power systems is quite essential information for system operators to enhance control-room situational awareness capability. Therefore, it is of great importance to develop an event location estimation algorithm for transmission systems with high accuracy. With the development of wide-area measurement system (WAMS) such as FNET/GridEye, and the synchrophasor measurement devices (SMDs) such as frequency disturbance recorders (FDRs), the synchronous measurement data including frequency, voltage amplitude and phase angle can be collected and used for event location estimation. First, the phase angle and rate of change of frequency (RoCoF) trajectories are respectively used for determining two sets of wave arrival time associated with each FDR. Then, a convolutional neural network (CNN) is utilized to determine the wave arrival order to select the more suitable set of wave arrival times for a given case and to perform corresponding modifications. Next, the oscillation intensity associated with each FDR is determined based on phase angle trajectories in the center of inertia (COI) coordinate system. Finally, the multiple criteria for event location estimation are represented. In conclusion, case studies and comparisons between the proposed and previous algorithms using actual and confirmed cases in U.S. power systems are performed to demonstrate the effectiveness and improvement of the proposed algorithm in practical applications.

frequency disturbance recorder (FDR)↗
NASA NTRS1980

Orbit transfer vehicle engine study. Volume 3: Program costs

Budgetary and planning cost estimates are presented that were prepared for the development, production and operation and flight support phases for each of the engines proposed for OTV propulsion. The major features of each category engine are described. The development program estimates were structured to the preliminary program Work Breakdown Structures (WBS). Program costs are provided within the applicable WBS elements to Level 4 for each category engine. The production program cost estimates assume a first production lot of 50 units produced at a rate of two units per month. Cumulative average unit costs assume a 90% learning capability. The operations and flight support cost estimates are based on 15, 30 and 45 missions per year for the period 1988 through 1999. Estimated funding requirements were developed for each category and program phase. All cost estimates and funding data are presented in 1979 dollars. The assumptions and ground rules for these estimates are summarized.

Source record↗
NASA NTRS1995

Estimation of penetration of forest canopies by Interferometric SAR measurements

In contrast to traditional Synthetic Aperture Radar (SAR), an Interferometric SAR (INSAR) yields two additional measurements: the phase difference and the correlation between the two interferometric channels. The phase difference has been used to estimate topographic height. For homogeneous surfaces, the correlation depends on the system signal-to-noise (SNR) ratio, the interferometer parameters, and the local slope. In the presence of volume scattering, such as that encountered in vegetation canopies, the correlation between the two channels is also dependent on the degree of penetration of the radiation into the scattering medium. In this paper, we propose a method for removing system and slope effects in order to obtain the decorrelation due to penetration alone. The sensitivities and accuracy of the proposed method are determined by Monte Carlo experiments, and we show that the proposed technique has sufficient sensitivity to provide penetration measurements for airborne SAR systems. Next, we provide a theoretical model to estimate the degree of penetration in a way which is independent of the details of the scattering medium. We also present a model for the correlation from non-homogeneous layers. We assess the sensitivity of the proposed inversion technique to these inhomogeneous situations. Finally, we present a comparison of the interferometric results against in situ data obtained by an airborne laser profilometer which provides a direct measurement of tree height and an estimate of the vegetation density profile in the forested areas around Mt. Adams, WA.

Rodriguez, Ernesto↗
NASA NTRS1995

Estimation of Penetration of Forest Canopies by Interferometric SAR Measurements

In contrast to traditional Synthetic Aperture Radar (SAR), and Interferometric SAR (INSAR) yields two additional measurements: the phase difference and the correlation between the two interferometric channels. The phase difference has been used to estimate topographic height. A method is proposed for removing system and slope effects. A model is provided to estimate the degree of radiation penetration.

Forestry↗
NASA NTRS2001

Effects of Convective Transport of Solute and Impurities on Defect-Causing Kinetics Instabilities

For in-situ studies of the formation and evolution of step patterns during the growth of protein crystals, we have designed and assembled an experimental setup based on Michelson interferometry with the surface of the growing protein crystal as one of the reflective surfaces. The crystallization part of the device allows optical monitoring of a face of a crystal growing at temperature stable within 0.05 C in a developed solution flow of controlled direction and speed. The reference arm of the interferometer contains a liquid-crystal element that allows controlled shifts of the phase of the interferograms. We employ an image processing algorithm which combines five images with a pi/2 phase difference between each pair of images. The images are transferred to a computer by a camera capable of capturing 6-8 frames per second. The device allows data collection data regarding growth over a relatively large area (approximately .3 sq. mm) in-situ and in real time during growth. The estimated dept resolution of the phase shifting interferometry is about 100 A. The lateral resolution, depending on the zoom ratio, varies between 0.3 and 0.6 micrometers. We have now collected quantitative results on the onset, initial stages and development of instabilities in moving step trains on vicinal crystal surfaces at varying supersaturation, position on the facet, crystal size and temperature with the proteins ferritin, apoferritin and thaumatin. Comparisons with theory, especially with the AFM results on the molecular level processes, see below, allow tests of the rational for the effects of convective flows and, as a particular case, the lack thereof, on step bunching.

Vekilov, Peter G.↗
DOE OSTI2023

Uniform-in-phase-space data selection with iterative normalizing flows

Improvements in computational and experimental capabilities are rapidly increasing the amount of scientific data that are routinely generated. In applications that are constrained by memory and computational intensity, excessively large datasets may hinder scientific discovery, making data reduction a critical component of data-driven methods. Datasets are growing in two directions: the number of data points and their dimensionality. Whereas dimension reduction typically aims at describing each data sample on lower-dimensional space, the focus here is on reducing the number of data points. A strategy is proposed to select data points such that they uniformly span the phase-space of the data. The algorithm proposed relies on estimating the probability map of the data and using it to construct an acceptance probability. An iterative method is used to accurately estimate the probability of the rare data points when only a small subset of the dataset is used to construct the probability map. Instead of binning the phase-space to estimate the probability map, its functional form is approximated with a normalizing flow. Therefore, the method naturally extends to high-dimensional datasets. The proposed framework is demonstrated as a viable pathway to enable data-efficient machine learning when abundant data are available.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1981

Landsat-based estimation of California's irrigated land

The procedure developed uses two-phase sampling, stratification and multidate Landsat imagery to produce the estimate. Maximizing the advantages of both spectral data and field patterns available from Landsat, three dates of Landsat imagery are interpreted to provide county-wide estimates of the proportion of land irrigated. Ground data, collected on a subset of the area interpreted on Landsat, are used to calibrate the satellite estimate. The satellite and ground measurements are reduced to proportion data and linked using a regression estimator to produce the estimate of irrigated land. It is estimated that 3.99 million hectares were irrigated with a relative standard error of + or - 1.18% at the 99% confidence level. Acreage tabulations provided by the Department of Water Resources show that the Landsat-based estimate differed by less than 0.4% at the state level.

Wall, S. L.↗
NASA NTRS1984

Interferometric phase velocity measurements

Phase velocities of plasma waves near the lower hybrid frequency were measured with an interferometer composed of two spatially separated electron-density probes. The plasma waves were produced in the F-region ionosphere by an argon ion beam. By calculating the normalized cross spectrum of the plasma waves a coherency of .98 was estimated along with a maximum phase difference of pi/3 radians between the two probes. This implies that the wavelength was 6 meters compared to an O(+) gyroradius of 3.8 meters, and that the phase velocity was 45 km/sec compared to an ion-beam velocity of 12.4 km/sec. These numbers compare favorably with recent predictions of a nonresonant mode produced by a dense ion beam.

Kintner, P. M.↗
NASA NTRS2000

Phase Shift Interferometer and Growth Set Up to Step Pattern Formation During Growth From Solutions. Influence of the Oscillatory solution Flow on Stability

We have assembled an experimental setup based on Michelson interferometry with the growing crystal surface as one of the reflective surfaces. The crystallization part of the device allows optical monitoring of a face of a crystal growing at temperature stable within 0.05 C in a flow of solution of controlled direction and speed. The reference arm of the interferometer contains a liquid crystal element that allows controlled shifts of the phase of the interferograms. We employ an image-processing algorithm, which combines five images with a pi/2 phase difference between each pair of images. The images are transferred to a computer by a camera capable of capturing 60 frames per second. The device allows data collection on surface morphology and kinetics during the face layers growth over a relatively large area (approximately 4 sq. mm) in situ and in real time during growth. The estimated depth resolution of the phase shifting interferometry is approximately 50 Angstroms. The data will be analyzed in order to reveal and monitor step bunching during the growth process. The crystal chosen as a model for study in this work is KH2PO4 (KDP). This optically non-linear material is widely used in frequency doubling applications. There have been a number of studies of the kinetics of KDP crystallization that can serve as a benchmark for our investigations. However, so far, systematic quantitative characteristics of step interaction and bunching are missing. We intend to present our first quantitative results on the onset, initial stages and development of instabilities in moving step trains on vicinal crystal surfaces at varying supersaturation, flow rate, and flow direction. Behavior of a vicinal face growing from solution flowing normal to the steps and periodically changing its direction in time was considered theoretically. It was found that this oscillating flow reduces both stabilization and destabilization effects resulted from the unidirectional solution flow directed up the step stream and down the step stream. This reduction of stabilization and destabilization comes from effective mixing which entangles the phase shifts between the spatially periodic interface perturbation and the concentration wave induced by this perturbation. Numerical results and simplified mixing criterion will be discussed.

Chernov, Alex A.↗
DOE OSTI2026

Structural, magnetic and electrical transport properties of YMnAl

The intermetallic compound YMnAl, crystallizing in the cubic C-15 (MgCu 2 -type) structure, was prepared using arc-melting and annealing. Rietveld refinement of the XRD pattern yields a lattice parameter of a = 7.816(1) Å⁠. The system exhibits antiferromagnetic order with a transition temperature of approximately 38 K, along with indications of a spin-glass–like phase. The effective magnetic moment, estimated from Curie–Weiss fitting of the susceptibility versus temperature curve, is 6.06 μ B /f.u. and the Curie–Weiss temperature of −79 K confirming the antiferromagnetic nature. Isothermal magnetization measurements below and above the Néel temperature show no saturation, with a maximum magnetization of 0.09 μ B /f.u observed at an applied field of 9 T. The temperature dependence of resistivity exhibits a negative temperature coefficient, characteristic of dirty metals. Hall effect measurements indicate the absence of an anomalous Hall contribution. The Hall coefficient RH, carrier concentration n, and mobility μ estimated from R XY (H) are -1.05×10 -8 m 3 /C, 5.92×10 26 m -3 and 1.05×10 -3 m 2 /V.s, respectively. Our first-principles calculations indicate that YMnAl in the orthorhombic (Imma) structure has the lowest energy; however, the substitutional disorder occurring during experimental synthesis may favor the formation of the cubic Laves phase.

Crystallography↗
NASA NTRS1990

Studies in astronomical time series analysis. IV - Modeling chaotic and random processes with linear filters

While chaos arises only in nonlinear systems, standard linear time series models are nevertheless useful for analyzing data from chaotic processes. This paper introduces such a model, the chaotic moving average. This time-domain model is based on the theorem that any chaotic process can be represented as the convolution of a linear filter with an uncorrelated process called the chaotic innovation. A technique, minimum phase-volume deconvolution, is introduced to estimate the filter and innovation. The algorithm measures the quality of a model using the volume covered by the phase-portrait of the innovation process. Experiments on synthetic data demonstrate that the algorithm accurately recovers the parameters of simple chaotic processes. Though tailored for chaos, the algorithm can detect both chaos and randomness, distinguish them from each other, and separate them if both are present. It can also recover nonminimum-delay pulse shapes in non-Gaussian processes, both random and chaotic.

Scargle, Jeffrey D.↗
NASA NTRS1995

Designing planetary protection into the Mars observer mission

Planetary protection has been an important consideration during the process of designing the Mars Observer mission. It affected trajectory design of both the interplanetary transfer and the orbits at Mars; these in turn affected the observation strategies developed for the mission. The Project relied mainly on the strategy of collision avoidance to prevent contamination of Mars. Conservative estimates of spacecraft reliability and Martian atmosphere density were used to evaluate decisions concerning the interplanetary trajectory, the orbit insertion phase at Mars, and operations in orbit at Mars and afterwards. Changes in the trajectory design, especially in the orbit insertion phase, required a refinement of those estimates.

Sweetser, T. H.↗
DOE OSTI2024

Thermoelastic Properties of Fe 3+ ‐Rich Jeffbenite and Application to Superdeep Diamond Barometry

Abstract Jeffbenite (Mg 3 Al 2 Si 3 O 12 ) is a tetragonal phase found in so far only in superdeep diamonds, and its thermoelastic parameters are a prerequisite for determining entrapment pressures as it is regarded as a potential indicator for superdeep diamonds. In this study, the thermoelastic properties of synthetic Fe 3+ ‐jeffbenite were measured up to 33.7 GPa and 750 K. High‐temperature static compression data were fitted, giving ( ∂K T 0 / ∂ T ) P = −0.0107 (4) GPa/K and α T = 3.50 (3) × 10 −5 K −1 . The thermoelastic properties and phase stability are applied to modeling isomekes, or P‐T paths intersecting possible conditions of entrapment in diamond. We calculate that under ideal exhumation, jeffbenite entrapped at mantle transition zone conditions will exhibit a high remnant pressure at 300 K ( P inc ) of ∼5.0 GPa. Elastic geobarometry on future finds of jeffbenite inclusions can use the new equation of state to estimate entrapment pressures for this phase with still highly uncertain stability field in the mantle.

Geology↗
DOE OSTI2023

Phase equilibria in iron-rich Sm–Fe–Ti and Sm–(Fe,Co)–Ti alloys at 1100–1200 °C

Iron-rich corners of ternary Sm–Fe–Ti phase diagram at 1100 °C and quasi-ternary Sm–Fe 0.8 Co 0.2 –Ti phase diagrams at 1100 and 1200 °C are constructed based on experimental investigation of equilibrated alloys with electron probe microanalysis, X-ray diffraction and thermomagnetic analysis. In addition, the upper boundaries of the temperature ranges of Sm(Fe,[Co,]Ti) 12 and Sm 3 (Fe,[Co,]Ti) 29 phases are determined with differential thermal analysis to update earlier rough estimates. The existence of a high-temperature phase of the Th 2 Ni 17 type, originally reported by Ivanova et al. [J. Alloys Compd. 224 (1995) 29], is confirmed. In the Sm–Fe 0.8 Co 0.2 –Ti system, the composition and equilibria of this hexagonal phase are established for 1200 °C; it is Sm-depleted (≈9.8 at.% Sm) compared to the 2:17 stoichiometry and it coexists with the rhombohedral 2:17 phase. The magnetic anisotropy of the cobalt-substituted Th 2 Ni 17 -type phase is planar, with the easy magnetization direction parallel to [100]. Equilibrium between a Sm-rich liquid phase and the 1:12 phase, which is important for the development of new high-performance permanent magnets, is absent up to 1000 °C, but does exist at 1100 °C (for the 1:12 phase with at least 8.7–8.9 at.% Ti) and at 1200 °C (for the 1:12 phase with as little as 7.4 at.% Ti). The development of magnets may be complicated, however, by an observed tendency of the high-temperature liquid to solidify into ferromagnetic phases including the Th 2 Ni 17 -type phase. The Curie temperatures of the α-(Fe,Ti), Sm(Fe,Ti) 12 , Sm 3 (Fe,Ti) 29 and rhombohedral Sm 2 (Fe,Ti) 17 phases are not only increased by the partial Co substitution for Fe, but their dependence on the Ti concentration is changed by this Co substitution from positive (or, for the 1:12 phase, zero) to negative values.

36 MATERIALS SCIENCE↗
NASA NTRS1991

Image inversion analysis of the HST OTA (Hubble Space Telescope Optical Telescope Assembly), phase A

Technical work during September-December 1990 consisted of: (1) analyzing HST point source images obtained from JPL; (2) retrieving phase information from the images by a direct (noniterative) technique; and (3) characterizing the wavefront aberration due to the errors in the Hubble Space Telescope (HST) mirrors, in a preliminary manner. This work was in support of JPL design of compensating optics for the next generation wide-field planetary camera on HST. This digital technique for phase retrieval from pairs of defocused images, is based on the energy transport equation between these image planes. In addition, an end-to-end wave optics routine, based on the JPL Code 5 prescription of the unaberrated HST and WFPC, was derived for output of the reference phase front when mirror error is absent. Also, the Roddier routine unwrapped the retrieved phase by inserting the required jumps of +/- 2(pi) radians for the sake of smoothness. A least-squares fitting routine, insensitive to phase unwrapping, but nonlinear, was used to obtain estimates of the Zernike polynomial coefficients that describe the aberration. The phase results were close to, but higher than, the expected error in conic constant of the primary mirror suggested by the fossil evidence. The analysis of aberration contributed by the camera itself could be responsible for the small discrepancy, but was not verified by analysis.

Litvak, M. M.↗
NASA NTRS2000

Stardust Navigation Covariance Analysis

The Stardust spacecraft was launched on February 7, 1999 aboard a Boeing Delta-II rocket. Mission participants include the National Aeronautics and Space Administration (NASA), the Jet Propulsion Laboratory (JPL), Lockheed Martin Astronautics (LMA) and the University of Washington. The primary objective of the mission is to collect in-situ samples of the coma of comet Wild-2 and return those samples to the Earth for analysis. Mission design and operational navigation for Stardust is performed by the Jet Propulsion Laboratory (JPL). This paper will describe the extensive JPL effort in support of the Stardust pre-launch analysis of the orbit determination component of the mission covariance study. A description of the mission and it's trajectory will be provided first, followed by a discussion of the covariance procedure and models. Predicted accuracy's will be examined as they relate to navigation delivery requirements for specific critical events during the mission. Stardust was launched into a heliocentric trajectory in early 1999. It will perform an Earth Gravity Assist (EGA) on January 15, 2001 to acquire an orbit for the eventual rendezvous with comet Wild-2. The spacecraft will fly through the coma (atmosphere) on the dayside of Wild-2 on January 2, 2004. At that time samples will be obtained using an aerogel collector. After the comet encounter Stardust will return to Earth when the Sample Return Capsule (SRC) will separate and land at the Utah Test Site (UTTR) on January 15, 2006. The spacecraft will however be deflected off into a heliocentric orbit. The mission is divided into three phases for the covariance analysis. They are 1) Launch to EGA, 2) EGA to Wild-2 encounter and 3) Wild-2 encounter to Earth reentry. Orbit determination assumptions for each phase are provided. These include estimated and consider parameters and their associated a-priori uncertainties. Major perturbations to the trajectory include 19 deterministic and statistical maneuvers planned for the mission. The spacecraft is three axis stabilized and has unbalanced thrusters for attitude control. Accelerations due to the attitude control system are treated stochastically. The tracking scenario for the study is patterned after the actual schedule employed during the different phases of the mission. Conventional X-band two-way Doppler and SRA range data was simulated and the standard accuracy for these data types was assumed throughout most of the mission. However, a deweighting scheme was used for the Doppler data during times of low Sun-Earth-Probe angles, especially in the case of the DSM. Optical data is assumed to be available starting at 50 days prior to the comet encounter. The optical data will be used to improve the ephemeris of Wild-2, which is considered crucial to properly target the comet flyby. Results of the covariance analysis are presented for all mission phases. Navigation capability will be discussed in terms of the uncertainty in the encounter B-Plane (B.R and B.T) and linearized time of flight. Delivery errors based on the final maneuver prior to the comet encounter will be presented. The most stringent navigation requirement is for the Earth reentry. The uncertainty in the flight path angle must be less than 0.02 degree (orbit determination and maneuver performance) to assure successful recovery of the SRC. Results presented show that this requirement can be met.

Menon, Premkumar R.↗
NASA NTRS1983

Preliminary statistical studies concerning the Campos RJ sugar cane area, using LANDSAT imagery and aerial photographs

The two phase sampling technique was applied to estimate the area cultivated with sugar cane in an approximately 984 sq km pilot region of Campos. Correlation between existing aerial photography and LANDSAT data was used. The two phase sampling technique corresponded to 99.6% of the results obtained by aerial photography, taken as ground truth. This estimate has a standard deviation of 225 ha, which constitutes a coefficient of variation of 0.6%.

Parada, N. D. J.↗