SEARCH · Engineering Papers

Results for “beams”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Electromagnetic hot ion beam instabilities - Quasi-linear theory and simulation

This paper considers the quasi-linear theory of the right- and left-hand resonant electromagnetic instabilities driven by a hot ion beam streaming parallel to a magnetic field in a homogeneous Vlasov plasma. Using the single-mode approximation, the time evolutions of important parameters are obtained to show that for the range of parameters considered, reduction of the beam speed and formation of temperature anisotropies are the most significant factors in the quasi-linear stabilization process. Combining both instabilities in a quasi-linear study is found to produce a roughly equal mixture of both polarizations and relatively isotropic conditions for tenuous beam densities and low initial beam drift speeds. Computer simulations are used to compare with the quasi-linear results. The simulations justify the single-mode assumption, verify that quasi-linear changes are the means of saturation for the parameter range of concern, and check the nonlinear evolution of the system when both modes are present.

Rogers, B.↗

NASA NTRS1986

Static deflection control of flexible beams by piezo-electric actuators

This study deals with the utilization of piezo-electric actuators in controlling the static deformation of flexible beams. An optimum design procedure is presented to enable the selection of the optimal location, thickness and excitation voltage of the piezo-electric actuators in a way that would minimize the deflection of the beam to which these actuators are bonded. Numerical examples are presented to illustrate the application of the developed optimization procedure in minimizing the structural deformation of beams of different materials when subjected to different loading and end conditions using ceramic or polymeric piezo-electric actuators. The results obtained emphasize the importance of the devised rational procedure in designing beam-actuator systems with minimal elastic distortions.

Baz, A. M.↗

NASA NTRS1987

Comparison of composite rotor blade models: A coupled-beam analysis and an MSC/NASTRAN finite-element model

A methodology was developed for the structural analysis of composite rotor blades. This coupled-beam analysis is relatively simple to use compared with alternative analysis techniques. The beam analysis was developed for thin-wall single-cell rotor structures and includes the effects of elastic coupling. This paper demonstrates the effectiveness of the new composite-beam analysis method through comparison of its results with those of an established baseline analysis technique. The baseline analysis is an MSC/NASTRAN finite-element model built up from anisotropic shell elements. Deformations are compared for three linear static load cases of centrifugal force at design rotor speed, applied torque, and lift for an ideal rotor in hover. A D-spar designed to twist under axial loading is the subject of the analysis. Results indicate the coupled-beam analysis is well within engineering accuracy.

Hodges, Robert V.↗

NASA NTRS1987

Beam waveguides in the Deep Space Network

A beam waveguide is a mechanism for guiding electromagnetic radiation from one part of an antenna to another through a series of reflectors. Appropriate placement of reflectors on an antenna allows a beam to be guided around the elevation axis and/or below the alidade. The beam waveguide permits placement of all electronics in a room on the alidade below the elevation axis, or below the alidade; feed horn covers to be protected from the weather; and feed electronics to be in spacious rooms rather than in crowded cones, and always level rather than tipping with change in elevation angle. These factors can lead to lower costs in implementation such as Ka-band, better antenna performance at X-band, more efficient and stable performance of transmitters and receivers, and lower maintenance and operating costs. Studies are underway to determine methods for converting the major antennas of the Deep Space Network (DSN) to beam waveguide operations by 1995.

Clauss, R. C.↗

NASA NTRS1987

A method of predicting the energy-absorption capability of composite subfloor beams

A simple method of predicting the energy-absorption capability of composite subfloor beam structure was developed. The method is based upon the weighted sum of the energy-absorption capability of constituent elements of a subfloor beam. An empirical data base of energy absorption results from circular and square cross section tube specimens were used in the prediction capability. The procedure is applicable to a wide range of subfloor beam structure. The procedure was demonstrated on three subfloor beam concepts. Agreement between test and prediction was within seven percent for all three cases.

Farley, Gary L.↗

NASA NTRS1986

Plasma heating, plasma flow and wave production around an electron beam injected into the ionosphere

A brief historical summary of the Minnesota ECHO series and other relevant electron beam experiments is given. The primary purpose of the ECHO experiments is the use of conjugate echoes as probes of the magnetosphere, but beam-plasma and wave studies were also made. The measurement of quasi-dc electric fields and ion streaming during the ECHO 6 experiment has given a pattern for the plasma flow in the hot plasma region extending to 60m radius about the ECHO 6 electron beam. The sheath and potential well caused by ion orbits is discussed with the aid of a model which fits the observations. ELF wave production in the plasma sheath around the beam is briefly discussed. The new ECHO 7 mission to be launched from the Poker Flat range in November 1987 is described.

Winckler, J. R.↗

NASA NTRS1986

The effect of beam-driven return current instability on solar hard X-ray bursts

The problem of electrostatic wave generation by a return current driven by a small area electron beam during solar hard X-ray bursts is discussed. The marginal stability method is used to solve numerically the electron and ion heating equations for a prescribed beam current evolution. When ion-acoustic waves are considered, the method appears satisfactory and, following an initial phase of Coulomb resistivity in which T sub e/T sub i rise, predicts a rapid heating of substantial plasma volumes by anomalous ohmic dissipation. This hot plasma emits so much thermal bremsstrahlung that, contrary to previous expectations, the unstable beam-plasma system actually emits more hard X-rays than does the beam in the purely collisional thick target regime relevant to larger injection areas. Inclusion of ion-cyclotron waves results in ion-acoustic wave onset at lower T sub e/T sub i and a marginal stability treatment yields unphysical results.

Cromwell, D.↗

NASA NTRS1987

Neutral atomic oxygen beam produced by ion charge exchange for Low Earth Orbital (LEO) simulation

A low energy neutral atomic oxygen beam system was designed and is currently being assembled at the Lewis Research Center. The system utilizes a 15 cm diameter Kaufman ion source to produce positive oxygen ions which are charge exchange neutralized to produce low energy (variable from 5 to 150 eV) oxygen atoms at a flux simulating real time low Earth orbital conditions. An electromagnet is used to direct only the singly charged oxygen ions from the ion source into the charge exchange cell. A retarding potential grid is used to slow down the oxygen ions to desired energies prior to their charge exchange. Cryogenically cooled diatomic oxygen gas in the charge exchange cell is then used to transfer charge to the oxygen ions to produce a neutral atomic oxygen beam. Remaining non-charge exchanged oxygen ions are then swept from the beam by electromagnetic or electrostatic deflection depending upon the desired experiment configuration. The resulting neutral oxygen beam of 5 to 10 cm in diameter impinges upon target materials within a sample holder fixture that can also provide for simultaneous heating and UV exposure during the atomic oxygen bombardment.

Banks, Bruce↗

NASA NTRS1987

Production of pulsed atomic oxygen beams via laser vaporization methods

Energetic pulsed atomic oxygen beams were generated by laser-driven evaporation of cryogenically frozen ozone/oxygen films and thin films of indium-tin oxide (ITO). Mass and energy characterization of beams from the ozone/oxygen films were carried out by mass spectrometry. The peak flux, found to occur at 10 eV, is estimated from this data to be 3 x 10(20) m(-2) s(-1). Analysis of the time-of-flight data indicates a number of processes contribute to the formation of the atomic oxygen beam. The absence of metastable states such as the 2p(3) 3s(1) (5S) level of atomic oxygen blown off from ITO films is supported by the failure to observe emission at 777.3 nm from the 2p(3) 3p(1) (5P sub J) levels. Reactive scattering experiments with polymer film targets for atomic oxygen bombardment are planned using a universal crossed molecular beam apparatus.

Brinza, David E.↗

NASA NTRS1986

Optimum structural sizing of conventional cantilever and joined wing configurations using equivalent beam models

The present paper describes an approach for the optimum sizing of single and joined wing structures that is based on representing the built-up finite element model of the structure by an equivalent beam model. The low order beam model is computationally more efficient in an environment that requires repetitive analysis of several trial designs. The design procedure is implemented in a computer program that requires geometry and loading data typically available from an aerodynamic synthesis program, to create the finite element model of the lifting surface and an equivalent beam model. A fully stressed design procedure is used to obtain rapid estimates of the optimum structural weight for the beam model for a given geometry, and a qualitative description of the material distribution over the wing structure. The synthesis procedure is demonstrated for representative single wing and joined wing structures.

Hajela, P.↗

NASA NTRS1986

Waves generated during electron beam emissions from the Space Shuttle

Observations from the SEPAC (Space Experiments with Particle Accelerators) experiment on Spacelab 1 Shuttle mission of waves generated during electron beam emissions are presented. The dependence of the wave intensity on the beam parameters and the Shuttle attitude is outlined, and the shape of the wave spectra are discussed. It is found that the noise in the 0.75- to 10 kHz band has a spectral shape that can be characterized by an f exp -n law, and that the VLF signal level depends on the beam angle to the magnetic field, the strongest emissions being observed for parallel beams. These features are found to be consistent with a drift wave instability.

Neubert, T.↗

NASA NTRS1987

A new model for the ion beams in the plasma sheet boundary layer

A new model is proposed for the ion beams frequently observed in the plasma sheet boundary layer. The model assumes injection of magnetosheath plasma onto closed tail field lines. The plasma then expands along the field lines and is convected towards the earth. Particle simulations of the expansion process are used to calculate properties of these beams. The expansion produces beams of ions at energies of up to a few tens of k(B)T(e), which are consistent with the observed energies of the beams.

Whelan, T.↗

NASA NTRS1987

A method of predicting the energy-absorption capability of composite subfloor beams

A simple method of predicting the energy-absorption capability of composite subfloor beam structure has been developed. The method is based upon the weighted sum of the energy-absorption capability of constituent elements of a subfloor beam. An empirical data base of energy absorption results from circular and square cross section tube specimens were used in the prediction capability. The procedure is applicable to a wide range of subfloor beam structure. The procedure was demonstrated on three subfloor beam concepts. Agreement between test and prediction was within seven percent for all three cases.

Farley, Gary L.↗

NASA NTRS1986

A parametric study of the beam refraction problems across laser anemometer windows

The experimenter is often required to view flows through a window with a different index of refraction than either the medium being observed or the medium that the laser anemometer is immersed in. The refraction that occurs at the window surfaces may lead to undesirable changes in probe volume position or beam crossing angle and can lead to partial or complete beam uncrossing. This report describes the results of a parametric study of this problem using a ray tracing technique to predict these changes. The windows studied were a flat plate and a simple cylinder. For the flat-plate study: (1) surface thickness, (2) beam crossing angle, (3) bisecting line - surface normal angle, and (4) incoming beam plane surface orientation were varied. For the cylindrical window additional parameters were also varied: (1) probe volume immersion, (2) probe volume off-radial position, and (3) probe volume position out of the r-theta plane of the lens. A number of empirical correlations were deduced to aid the reader in determining the movement, uncrossing, and change in crossing angle for a particular situations.

Owen, Albert K.↗

NASA NTRS1987

Ion beams and the ion/ion acoustic instability upstream from the earth's bow shock

This paper considers the generation of enhanced ion acoustic fluctuations by field-aligned ion beams upstream from the earth's bow shock. Steep slopes in the beam distribution parallel and possibly strongly oblique to the magnetic field are correlated with bursts of ion acoustic noise in the upstream region. Linear theory shows that it is the slope of the beam distribution at oblique angles to the magnetic field that determines the growth rate of the ion/ion acoustic instability. Because of instrumentation limitations, it is suggested but not confirmed that enhanced ion acoustic fluctuations in the upstream region and in the presence of field-aligned beams are driven by such steep-sided distributions.

Fuselier, S. A.↗

NASA NTRS1986

Ultra small electron beam amplifiers

Data on field emission and microfabrication technologies relevant to the development of low-power electron-beam amplifiers and oscillators are discussed. The fabrication of a thin-film field-emission (TFFE) cathode for a 1-W electron-beam amplifier is examined. Some TFFE cathodes have been developed and tested in electron guns. Recent experimental results reveal that a beam can be formed from the field-emission cathode, and the TFFE cathode is applicable for devices operating below 3 kV at currents of less than 20 mA. The use of microfabrication techniques to construct slow-wave circuits is studied, and the use of finned structures as the slow-wave circuit for an electron-beam oscillator or amplifier is proposed.

Dayton, J. A., Jr.↗

NASA NTRS1988

Dual-Cathode Electron-Beam Source

Beam from either cathode electromagnetically aligned with exit port. Electron beam from either of two cathodes deflected by magnetic and electric fields to central axis. Mechanical alignment of beam easy because cathode axes, anode apertures, and electron trajectories coplanar. Applications where uninterrupted service needed: scanning electron microscopes, transmission electron microscopes, electron-beam lithography equipment, Auger instruments, and microfocused x-ray sources.

Bradley, James G.↗

NASA NTRS1988

Dual-Cantilever-Beam Accelerometer

Sensitivity to velocity changes along beam axis reduced. Weighted-end cantilever beams of accelerometer deflected equally by acceleration in y direction. When acceleration to right as well as up or down, right beam deflected more, while left beam deflected less. Bridge circuit averages outputs of strain gauges measuring deflections, so cross-axis sensitivity of accelerometer reduced. New device simple and inexpensive.

Reynolds, Emmitt A.↗