Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STANDARD MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Development of the Model of Galactic Interstellar Emission for Standard Point-Source Analysis of Fermi Large Area Telescope Data

Most of the celestial gamma rays detected by the Large Area Telescope (LAT) on board the Fermi Gamma-ray Space Telescope originate from the interstellar medium when energetic cosmic rays interact with interstellar nucleons and photons. Conventional point-source and extended-source studies rely on the modeling of this diffuse emission for accurate characterization. Here, we describe the development of the Galactic Interstellar Emission Model (GIEM),which is the standard adopted by the LAT Collaboration and is publicly available. This model is based on a linear combination of maps for interstellar gas column density in Galactocentric annuli and for the inverse-Compton emission produced in the Galaxy. In the GIEM, we also include large-scale structures like Loop I and the Fermi bubbles. The measured gas emissivity spectra confirm that the cosmic-ray proton density decreases with Galactocentric distance beyond 5 kpc from the Galactic Center. The measurements also suggest a softening of the proton spectrum with Galactocentric distance. We observe that the Fermi bubbles have boundaries with a shape similar to a catenary at latitudes below 20deg and we observe an enhanced emission toward their base extending in the north and south Galactic directions and located within approximately 4deg of the Galactic Center.

gamma rays: diffuse background – gamma rays: gen↗
NASA NTRS1983

Radiation hardness of Efratom M-100 rubidium frequency standard

The effects of nuclear radiation on rubidium gas cell frequency standards and components are presented, including the results of recent tests where a continuously operating rubidium frequency standard (Effratom, Model M-100) was subjected to simultaneous neutron/gamma radiation. At the highest neutron fluence 7.5 10 to the 12th power n/sq cm and total dose 11 krad(Si) tested, the unit operated satisfactorily; the total frequency change over the 2 1/2 hour test period due to all causes, including repeated retraction from and insertion into the reactor, was less than 1 x 10 to the -10th power. The effects of combined neutron/gamma radiation on rubidium frequency standard physics package components were also studied, and the results are presented.

English, T. C.↗
NASA NTRS1931

Effect of Turbulence in Wind-Tunnel Measurements

This paper gives some quantitative measurements of wind tunnel turbulence and its effect on the air resistance of spheres and airship models, measurements made possible by the hot wire anemometer and associated apparatus in its original form was described in Technical Report no. 320 and some modifications are presented in an appendix to the present paper. One important result of the investigation is a curve by means of which measurements of the air resistance of spheres can be interpreted to give the turbulence quantitatively. Another is the definite proof that the discrepancies in the results on the N. P. L. Standard airship models are due mainly to differences in the turbulences of the wind tunnels in which the tests were made. An attempt is made to interpret the observed results in terms of the boundary layer theory and for this purpose a brief account is given of the physical bases of this theory and of conceptions that have been obtained by analogy with the laws of flow in pipes.

Dryden, H L↗
NASA NTRS2001

Ocean-Science Mission Needs: Real-Time AUV Data for Command, Control, and Model Inputs

Predictive models for tides, hydrodynamics, and bio-optical properties affecting the visibility and buoyancy of coastal waters are needed to evaluate the safety of personnel and equipment engaged in maritime operations under potentially hazardous conditions. Predicted currents can be markedly different for two-layer systems affected by terrestrial runoff than for well-mixed conditions because the layering decouples the surface and bottom Ekman layers and rectifies the current response to oscillatory upwelling-and downwelling-favorable winds. Standard ocean models (e.g. Princeton Ocean Model) require initial-and boundary data on the physical and optical properties of the multilayered water column to provide accurate simulations of heat budgets and circulation. Two observational systems are designed to measure vertically structured conditions on the West Florida Shelf (WFS): a tethered buoy network and an autonomous underwater vehicle (AUV) observational system. The AUV system is described with a focus on the observational systems that challenge or limit the communications command and control network for various types of measurement programs. These include vertical oscillatory missions on shelf transects to observe the optical and hydrographic properties of the water column, and bottom-following missions for measuring the bottom albedo. Models of light propagation, absorption, and conversion to heat as well as determination of the buoyancy terms for physical models require these measurements. High data rates associated with video bottom imagery are the most challenging for the real-time, command and control communications system, but they are met through a combination of loss-less and lossy data-compression methods, depending upon the data-rate of the radio links.

Carder, Kendall L.↗
NASA NTRS1999

Prediction of Heat and Mass Transfer in a Rotating Ribbed Coolant Passage With a 180 Degree Turn

Numerical results are presented for flow in a rotating internal passage with a 180 degree turn and ribbed walls. Reynolds numbers ranging from 5200 to 7900, and Rotation numbers of 0.0 and 0.24 were considered. The straight sections of the channel have a square cross section, with square ribs spaced one hydraulic diameter (D) apart on two opposite sides. The ribs have a height of 0.1D and are not staggered from one side to the other. The full three dimensional Reynolds Averaged Navier-Stokes equations are solved combined with the Wilcox k-omega turbulence model. By solving an additional equation for mass transfer, it is possible to isolate the effect of buoyancy in the presence of rotation. That is, heat transfer induced buoyancy effects can be eliminated as in naphthalene sublimation experiments. Heat transfer, mass transfer and flow field results are presented with favorable agreement with available experimental data. It is shown that numerically predicting the reattachment between ribs is essential to achieving an accurate prediction of heat/mass transfer. For the low Reynolds numbers considered, the standard turbulence model did not produce reattachment between ribs. By modifying the wall boundary condition on omega, the turbulent specific dissipation rate, much better agreement with the flow structure and heat/ mass transfer was achieved. It is beyond the scope of the present work to make a general recommendation on the omega wall boundary condition. However, the present results suggest that the omega boundary condition should take into account the proximity to abrupt changes in geometry.

Rigby, David L.↗
NASA NTRS1993

ROSAT observations of pulsed soft X-ray emission from PSR 1055-52

Utilizing the position-sensitive proportional counter and the high-resolution imager aboard the orbiting X-ray observatory ROSAT, we have detected pulsations at the radio period from the pulsar PSR 1055-52. The pulse shapes are energy-dependent and show a transition at about 0.5 keV where the phase angle of the pulse peak changes by about -120 deg and the pulsed fraction increases from 11 percent to 63 percent toward larger energies. Simple spectral models are found to be unsatisfactory, while multicomponent models, such as a soft blackbody and hard power-law tail, yield better fits to the pulse-height data. The hard power-law tail is consistent with the extension of the recently reported EGRET results and may indicate a common emission mechanism for the X-ray through GeV gamma-ray regime. The soft blackbody component with T(infinity) = (7.5 +/- 0.6) x 10 exp 5 K, if interpreted as the initial cooling of a neutron star, is consistent with standard cooling models and does not require the presence of exotic components.

Oegelman, Hakki↗
NASA NTRS2017

Verification Testing: Meet User Needs Figure of Merit

Verification is the process through which Modeling and Simulation(M&S) software goes to ensure that it has been rigorously tested and debugged for its intended use. Validation confirms that said software accurately models and represents the real world system. Credibility gives an assessment of the development and testing effort that the software has gone through as well as how accurate and reliable test results are. Together, these three components form Verification, Validation, and Credibility(VV&C), the process by which all NASA modeling software is to be tested to ensure that it is ready for implementation. NASA created this process following the CAIB (Columbia Accident Investigation Board) report seeking to understand the reasons the Columbia space shuttle failed during reentry. The reports conclusion was that the accident was fully avoidable, however, among other issues, the necessary data to make an informed decision was not there and the result was complete loss of the shuttle and crew. In an effort to mitigate this problem, NASA put out their Standard for Models and Simulations, currently in version NASA-STD-7009A, in which they detailed their recommendations, requirements and rationale for the different components of VV&C. They did this with the intention that it would allow for people receiving MS software to clearly understand and have data from the past development effort. This in turn would allow the people who had not worked with the MS software before to move forward with greater confidence and efficiency in their work. This particular project looks to perform Verification on several MATLAB (Registered Trademark)(The MathWorks, Inc.) scripts that will be later implemented in a website interface. It seeks to take note and define the limits of operation, the units and significance, and the expected datatype and format of the inputs and outputs of each of the scripts. This is intended to prevent the code from attempting to make incorrect or impossible calculations. Additionally, this project will look at the coding generally and note inconsistencies, redundancies, and other aspects that may become problematic or slow down the codes run time. Certain scripts lacking in documentation also will be commented and cataloged.

validation↗
NASA NTRS2016

Promoting A-Priori Interoperability of HLA-Based Simulations in the Space Domain: The SISO Space Reference FOM Initiative

Distributed and Real-Time Simulation plays a key-role in the Space domain being exploited for missions and systems analysis and engineering as well as for crew training and operational support. One of the most popular standards is the 1516-2010 IEEE Standard for Modeling and Simulation (M&S) High Level Architecture (HLA). HLA supports the implementation of distributed simulations (called Federations) in which a set of simulation entities (called Federates) can interact using a Run-Time Infrastructure (RTI). In a given Federation, a Federate can publish and/or subscribes objects and interactions on the RTI only in accordance with their structures as defined in a FOM (Federation Object Model). Currently, the Space domain is characterized by a set of incompatible FOMs that, although meet the specific needs of different organizations and projects, increases the long-term cost for interoperability. In this context, the availability of a reference FOM for the Space domain will enable the development of interoperable HLA-based simulators for related joint projects and collaborations among worldwide organizations involved in the Space domain (e.g. NASA, ESA, Roscosmos, and JAXA). The paper presents a first set of results achieved by a SISO standardization effort that aims at providing a Space Reference FOM for international collaboration on Space systems simulations.

Moller, Bjorn↗
NASA NTRS1998

Current Status on the use of Parallel Computing in Turbulent Reacting Flow Computations Involving Sprays, Monte Carlo PDF and Unstructured Grids

The state of the art in multidimensional combustor modeling as evidenced by the level of sophistication employed in terms of modeling and numerical accuracy considerations, is also dictated by the available computer memory and turnaround times afforded by present-day computers. With the aim of advancing the current multi-dimensional computational tools used in the design of advanced technology combustors, a solution procedure is developed that combines the novelty of the coupled CFD/spray/scalar Monte Carlo PDF (Probability Density Function) computations on unstructured grids with the ability to run on parallel architectures. In this approach, the mean gas-phase velocity and turbulence fields are determined from a standard turbulence model, the joint composition of species and enthalpy from the solution of a modeled PDF transport equation, and a Lagrangian-based dilute spray model is used for the liquid-phase representation. The gas-turbine combustor flows are often characterized by a complex interaction between various physical processes associated with the interaction between the liquid and gas phases, droplet vaporization, turbulent mixing, heat release associated with chemical kinetics, radiative heat transfer associated with highly absorbing and radiating species, among others. The rate controlling processes often interact with each other at various disparate time 1 and length scales. In particular, turbulence plays an important role in determining the rates of mass and heat transfer, chemical reactions, and liquid phase evaporation in many practical combustion devices.

Raju, M. S.↗
NASA NTRS1972

The Aladdin experiment. I - Dynamics.

A coordinated rocket experiment was carried out on Nov. 20, 1970 at Eglin AFB, Fla. (30 deg N) to determine atmospheric layering and density distributions of ions and neutrals. The program measured vertical profiles between 70 and 150 km altitude of total neutrals, ions and electrons, individual species, temperature, density, diffusion coefficients, horizontal winds, and turbulent structure. A dynamic computer code model using these parameters was compared with the observed profiles. Wind fields were measured from seven chemical trails, separated up to 60 km horizontally and 600 sec in time. Kinetic temperatures were measured from fluorescence of chemically-released AlO, ranging from 440 to 680 K between 126 and 161 km. Densities derived from diffusion of the AlO ranged from 10 to 5 times 10 to the -12th power per cu cm between 126 and 139 km. A rocket-borne pitot probe showed wavelike density deviations from current standard atmosphere models, amounting to -25% at 80 and 110 km and to +25% at 100 and 125 km. The derived temperature profile from the pitot probe showed a double minimum at 74 and 102 km.

Rosenberg, N. W.↗
NASA NTRS2013

Nine-Year Wilkinson Microwave Anisotropy Probe (WMAP) Observations: Cosmological Parameter Results

We present cosmological parameter constraints based on the final nine-year Wilkinson Microwave Anisotropy Probe (WMAP) data, in conjunction with a number of additional cosmological data sets. The WMAP data alone, and in combination, continue to be remarkably well fit by a six-parameter Lambda-CDM model. When WMAP data are combined with measurements of the high-l cosmic microwave background anisotropy, the baryon acoustic oscillation scale, and the Hubble constant, the matter and energy densities Omega(sub b)h(exp 2), Omega(sub c)h(exp 2)and Omega(sub Lambda), are each determined to a precision of approx. 1.5%. The amplitude of the primordial spectrum is measured to within 3%, and there is now evidence for a tilt in the primordial spectrum at the 5 sigma level, confirming the first detection of tilt based on the five-year WMAP data. At the end of the WMAP mission, the nine-year data decrease the allowable volume of the six-dimensional Lambda-CDM parameter space by a factor of 68,000 relative to pre-WMAP measurements. We investigate a number of data combinations and show that their Lambda-CDM parameter fits are consistent. New limits on deviations from the six-parameter model are presented, for example: the fractional contribution of tensor modes is limited to r < 0.13 (95% CL); the spatial curvature parameter is limited to Omega(sub kappa) = (0.0027 (sub +0.0039) (sup −0.0038;) the summed mass of neutrinos is limited to Sigma M(sub nu) < 0.44 eV (95% CL); and the number of relativistic species is found to lie within N(sub eff) = 3.84 +/- 0+/-40, when the full data are analyzed. The joint constraint on N(sub eff) and the primordial helium abundance, Y(sub He), agrees with the prediction of standard big bang nucleosynthesis. We compare recent Planck measurements of the Sunyaev-Zel'dovich effect with our seven-year measurements, and show their mutual agreement. Our analysis of the polarization pattern around temperature extrema is updated. This confirms a fundamental prediction of the standard cosmological model and provides a striking illustration of acoustic oscillations and adiabatic initial conditions in the early universe.

cosmology↗
NASA NTRS1988

Physical properties of asteroids

Infrared photometry at 1.2, 1.6 and 2.2 micrometer provides a relatively rapid and accurate method for the classification of asteroids and is important for comparison with laboratory measurements of meteorites and other possible compositional analogues. Extension beyond the visual is espicially useful for minerals which have strong characteristic infrared colors such as olivine in the A class asteroids. Radiometry at long infrared wavelengths is important for deriving basic physical parameters (via thermal models) such as size and albedo which in turn enables the conversion of relative colors to absolute reflectances. In particular, albedos are the only way to distinguish among the otherwise ambiguous E, M and P classes of asteroids. Infrared observations of 15 asteroids were made at the NASA infrared Telescope Facility (IRTF) on Mauna Kea in 1987. Researchers completed the analysis of 22 Aten, Apollo and Amor asteroids. Results include albedos and diameters for these objects as well as the identification of the first known class M and Class E near-Earth asteroids. The standard thermal model appears to be inadequate for some of these small asteroids because of their coarse regolith, so researchers constructed a rotating thermal model for such asteroids. They have identified a subtle systematic difference between the sub-populations of large and small IRAS asteroids as well as several anomalous objects.

Veeder, Glenn J.↗
NASA NTRSDate not supplied

Model Performance in Simulating the Mid-Holocene Green Sahara

The Green Sahara Period, spanning about 11,500 to 5,000 years ago, offers an opportunity to test the ability of climate models to simulate large-scale changes in northern African climate through the strengthening of the West African Monsoon. In this study, we evaluate the performance of four models in simulating the mid-Holocene (6,000 BP), namely – EC-Earth, iCESM, CCSM4-Toronto, and the GISS ModelE2.1-G. Two scenarios are considered for each model – a standard PMIP scenario simulated with the mid-Holocene orbital parameters and greenhouse gas concentrations with vegetation prescribed to pre-industrial conditions, as well as a Green-Sahara scenario which additionally considers factors such as enhanced vegetation, reduced dust, presence of lakes, and land and soil feedbacks. All mid-Holocene scenarios capture an increase in monsoonal precipitation in northern Africa. However, a comparison of the two mid-Holocene scenarios reveals significantly higher precipitation in northern Africa for all the Green-Sahara scenarios relative to the PMIP scenarios – an observation consistent across all models. Accompanied by a strengthened Saharan Heat Low, these changes in the West African Monsoon are also linked to polar amplification, a stronger Indian Summer Monsoon and alterations to the Walker circulation. Model results are in agreement with pollen-based SAT records, multi-proxy SST records and African lake level records. This comparison indicates that a realistic simulation of the mid-Holocene Green Sahara requires consideration of multiple factors in addition to orbital and greenhouse gas forcings.

Green Sahara Period↗
NASA NTRS1994

A model for the evolution of CO2 on Mars

We have constructed a model that predicts the evolution of CO2 on Mars from the end of the heavy bombardment period to the present. The model draws on published estimates of the main processes believed to affect the fate of CO2 during this period: chemical weathering, regolith uptake, polar cap formation, and atmospheric escape. Except for escape, the rate at which these processes act is controlled by surface temperatures which we calculate using a modified version of the Gierasch and Toon energy balance model. The modifications account for the change in solar luminosity with time, the greenhouse effect, and a polar and equatorial energy budget. Using published estimates for the main parameters, we find no evolutionary scenario in which CO2 is capable of producing a warm (global mean temperatures greater than 250 K) and wet (surface pressures greater than 30 mbar) early climate, and then evolves to present conditions with approximately 7 mbar in the atmosphere, less than 300 mbar in the regolith, and less than 5 mbar in the caps. Such scenarios would only exist if the early sun were brighter than standard solar models suggest, if greenhouse gases other than CO2 were present in the early atmosphere, or if the polar albedo were significantly lower than 0.75. However, these scenarios generally require the storage of large amounts of CO2 (greater than 1 bar) in the carbonate reservoir. If the warm and wet early Mars constraint is relaxed, then we find best overall agreement with present day reservoirs for initial CO2 inventories of 0.5-1.0 bar. We also find that the polar caps can have a profound effect on how the system evolves. If the initial amount of CO2 is less than some critical value, then there is not enough heating of the poles to prevent permanent caps from forming. Once formed, these caps control how the system evolves, because they set the surface pressure and, hence, the thermal environment. If the initial amount of CO2 is greater than this critical value, then caps do not form initially, but can form later on, when weathering and escape lower the surface pressure to a point at which polar heating is no longer sufficient to prevent cap formation and the collapse of the climate system. Our modeling suggests this critical initial amount of CO2 is between 1 and 2 bar, but its true value will depend on all factors affecting the polar heat budget.

Haberle, Robert M.↗
NASA NTRS2012

GRB110721A: An Extreme Peak Energy and Signatures of the Photosphere

GRB110721A was observed by the Fermi Gamma-ray Space Telescope using its two instruments, the Large Area Telescope (LAT) and the Gamma-ray Burst Monitor (GBM). The burst consisted of one major emission episode which lasted for approximately 24.5 s (in the GBM) and had a peak flux of (5.7 +/- 0.2) 10(exp -5) erg s(exp -1) cm(exp -2). The time-resolved emission spectrum is best modeled with a combination of a Band function and a blackbody spectrum. The peak energy of the Band component was initially 15 +/- 2 MeV, which is the highest value ever detected in a GRB. This measurement was made possible by combining GBM/BGO data with LAT Low Energy events to achieve continuous 10-100 MeV coverage. The peak energy later decreased as a power law in time with an index of -1.89 +/- 0.10. The temperature of the blackbody component also decreased, starting from approximately 80 keV, and the decay showed a significant break after approximately 2s. The spectrum provides strong constraints on the standard synchrotron model, indicating that alternative mechanisms may give rise to the emission at these energies.

Axelsson, M.↗
NASA NTRS1985

Broad emission features in QSOs and active galactic nuclei. II - New observations and theory of Fe II and H I emission

Seven QSOs of low to intermediate redshift are characterized on the basis of: 320-850-nm spectra obtained with the UVITS spectrograph and image-dissector scanner at the f/9 Cassegrain focus of the 2.7-m reflecting telescope at McDonald Observatory; improved model calculations for the Fe II, Mg II, and Balmer lines and the Balmer continuum; and the theoretical results of Netzer and Wills (1983). The data are presented in tables, spectra, and difference spectra and described in detail. Fe II is found to be the largest contributor to the emission line spectrum, with strong UV Fe II lines in all QSOs (regardless of the strength of the optical Fe II lines) and an abundance ratio suggesting a factor-of-three overabundance of Fe relative to Mg and probably H. A discrepancy between the observed Fe II strength and the predictions of dustless standard photoionization models is noted, and the addition of a high-density component to the models is suggested.

Wills, B. J.↗
NASA NTRS1992

Backscattering from a randomly rough dielectric surface

A backscattering model for scattering from a randomly rough dielectric surface is developed based on an approximate solution of a pair of integral equations for the tangential surface fields. Both like and cross-polarized scattering coefficients are obtained. It is found that the like polarized scattering coefficients contain two types of terms: single scattering terms and multiple scattering terms. The single scattering terms in like polarized scattering are shown to reduce the first-order solutions derived from the small perturbation method when the roughness parameters satisfy the slightly rough conditions. When surface roughnesses are large but the surface slope is small, only a single scattering term corresponding to the standard Kirchhoff model is significant. If the surface slope is large, the multiple scattering term will also be significant. The cross-polarized backscattering coefficients satisfy reciprocity and contain only multiple scattering terms. The difference between vertical and horizontal scattering coefficients is found to increase with the dielectric constant and is generally smaller than that predicted by the first-order small perturbation model. Good agreements are obtained between this model and measurements from statistically known surfaces.

Fung, Adrian K.↗
NASA NTRS2007

Improving Access to MODIS Biophysical Science Products for NACP Investigators

MODIS 4 NACP is a NASA-funded project supporting the North American Carbon Program (NACP). The purpose of this Advancing Collaborative Connections for Earth-Sun System Science (ACCESS) project is to provide researchers with Moderate Resolution Imaging Spectroradiometer (MODIS) biophysical data products that are custom tailored for use in NACP model studies. Standard MODIS biophysical products provide used to improve our understanding on the climate and ecosystem changes. However, direct uses of the MODIS biophysical parameters are constrained by retrieval quality and cloud contamination. Another challenge that NACP users face is acquiring MODIS data in formats and at spatial-temporal resolutions consistent with other data sets they use. We have been working closely with key NACP users to tailor the MODIS products to fit their needs. First, we provide new temporally smoothed and spatially continuous MODIS biophysical data sets. Second, we are distributing MODIS data at suitable spatial-temporal resolutions and in formats consistent with other data integration into model studies.

Wolfe, Robert E.↗