Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “overlapping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

A shock spectra and impedance method to determine a bound for spacecraft structural loads

This paper proposes a method for the determination of design loads of a spacecraft mounted on a launch vehicle when the significant frequency ranges of the two structures overlap. The derived loads are realistic upper bounds of the flight loads. The method utilizes shock spectra of the spacecraft/launch vehicle interface directional accelerations for each event separately and introduces a reduction factor for the shock spectra which is based on the relative impedance of the spacecraft and launch vehicle. The main advantages of the method are low cost of analysis and timeliness in the design. These advantages are attained with only a slight expense of structural weight compared to the more exact transient analysis method.

Bamford, R.↗

Energy transfer by radiation in non-grey atomic gases in isothermal and non-isothermal slabs

A multiband model for the absorption coefficient of atomic hydrogen-helium plasmas is constructed which includes continuum and line contributions. Emission from 28 stronger lines of 106 that have been screened is considered, of which 21 are from hydrogen and 7 belong to helium, with reabsorption due to line-line, line-continuum overlap accurately accounted for. The model is utilized in the computation of intensities and fluxes from shock-heated slabs of 85% H2-15% He mixtures for slab thicknesses from 1 to 30 cm, temperature from 10,000 to 20,000 K, and for different densities. In conjunction with the multiband model, simple numerical schemes have been devised which provide a quick and comprehensive way of computing radiative energy transfer in nonisothermal and nongrey gases.

Poon, P. T. Y.↗

Isolated Stroemgren spheres as a source of galactic H alpha emission

The isolated H alpha emission features reported by Reynolds et al. are identified with Stroemgren spheres surrounding observed O stars; the root mean square electron densities and Stroemgren radii are calculated from the observed emission measure and stellar type. The density has an average value of 2 per cu cm but increases to 3.3 per cu cm for stars within 200 pc of the galactic plane. An analysis of the Catalogue of Galactic O Stars shows that enhanced H alpha emission is observed around all known O stars. The diffuse component of H alpha emission is what one would expect from the line-of-sight overlapping of isolated Stroemgren spheres surrounding B stars and appears to correlate with features on extinction maps, as derived. There is no compelling reason to suggest any large-scale intercloud ionization from H alpha data alone.

Elmergreen, B. G.↗

Shape of the 5 mm oxygen band in the atmosphere

The problem of absorption of microwaves by molecular oxygen in the atmosphere is treated by means of a first-order approximation to the impact theory of overlapping spectral lines. By including only the coupling between adjacent rotational states in molecular collisions, we have devised a simple approximate method for computing the interference between lines from measurements on the resolved lines. The need for an empirically determined function describing the linewidth/pressure ratio is eliminated. Comparisons with measurements at atmospheric pressures show that the first-order interference accounts for the low absorption at the band wings near 1 atm pressure. It also predicts the correct amount of asymmetry between high and low frequency wings.

Source record↗

Astrometric observations of Saturn's satellites from McDonald Observatory, 1972

Observations of Saturn's satellites have been reduced by means of secondary reference stars obtained by reduction of Palomar Sky Survey plates. This involved the use of 29 SAO stars and plate overlap technique to determine the coordinates of 59 fainter stars in the satellite field. Fourteen plate constants were determined for each of the two PSS plates. Comparison of two plate measurement and reduction techniques on the satellite measures appears to demonstrate the existence of a serious background gradient effect and the utility of microdensitometry to eliminate this error source in positional determinations of close satellites.

Abbot, R. I.↗

The He II lines in the spectrum of zeta Puppis

The observed He II line spectrum in zeta Pup is compared with that predicted from model atmospheres in an attempt to establish the parameters (effective temperature, log g) which characterize the model that best represents this star's atmosphere. The study is conducted by compiling equivalent widths of the He II lines in the series (n = 2,3,4,5) and comparing them with predictions from plane-parallel static model atmospheres using a non-LTE theory of line formation. Good agreement between observation and prediction for a model atmosphere with an effective temperature of 50,000 K and log of 4.0 is found for the upper members of the n = 3 and n = 5 series, but discrepancies are found for the two lines of the n = 2 series and the upper members of the n = 4 series. It is shown that the n = 4 level appears to be more overpopulated at moderate atmospheric depths than the non-LTE calculations with plane-parallel layers indicate. It is suggested that this may be due to an overlap of the H and He II lines in the even-even series caused by macroturbulent velocities of the hydrogen and helium atoms.

Snijders, M. A. J.↗

Fraction-storage unit for drug-identification system

Device, connecting outputs of all gas chromatographs to single, relatively inexpensive IR spectrometer, reduces costs of system. Storage unit provides buffer storage of samples until infrared spectrometer is ready to accept them. Storage unit can be used to separate overlapping peaks.

Campen, C. F.↗

IGFET/SOI fabrication method

Technique increases switching speeds, shortens channel length, reduces parasitic capacitance and gate overlap, and minimizes gate-to-channel capacitance. The p and n sections may be reversed, allowing fabrication of complementary devices.

Feltner, W. R.↗

A nonsaturating dc-to-dc parallel power converter

Device is conventional circuit modified with pair of diode rectifiers coupled to switching transistors via feedback winding. Transient-causing collector-current overlap between transistors is eliminated. Technique may be used with nonsaturating parallel-transistor converters operating from voltage source which remains fixed or varies over small range.

Lavigna, T.↗

Ultraviolet observations of classical Cepheids by OAO-2

OAO-2 observations of eight bright classical Cepheids in the wavelength region 1910 A to 4250 A are presented. The data for RT Aurigae, alpha Ursa Minoris, delta Cephei, and gamma Ophiuchi show excellent agreement with ground based photometry in the wavelength region of overlap and are consistent with a simple extrapolation of light curve properties from the visible region. However, in the ultraviolet, the light curve of beta Doradus shows two small flux bumps, at phases of 0.75 and 0.85, in addition to the well known bump at phase 0.0. All three bumps should probably be associated with the arrival of shocks at the stellar surface.

Hutchinson, J. L.↗

Experimental studies of flow separation and stalling on two-dimensional airfoils at low speeds. Phase 2: Studies with Fowler flap extended

Results were given on experimental studies of flow separation and stalling on a two-dimensional GA(W)-1 17 percent thick airfoil with an extended Fowler flap. Experimental velocity profiles obtained from a five tube probe survey with optimum flap gap and overlap setting (flap at 40 deg) are shown at various stations above, below, and behind the airfoil/flap combination for various angles of attack. The typical zones of steady flow, intermittent turbulence, and large scale turbulence were obtained from a hot wire anemometer survey and are depicted graphically for an angle of attack of 12.5 deg. Local skin friction distributions were obtained and are given for various angles of attack. Computer plots of the boundary layer profiles are shown for the case of the flap at 40 deg. Static pressure contours are also given. A GA(W)-2 section model was fabricated with 30 percent Fowler flaps and with pressure tabs.

Seetharam, H. C.↗

The Noisiness of Low-Frequency One-Third Octave Bands of Noise

This study examined the relative noisiness of low frequency one-third octave bands of noise bounded by the bands centered at 25 Hz and 200 Hz, with intensities ranging from 50 db sound pressure level (SPL) to 95 db SPL. The thirty-two subjects used a method-of-adjustment technique, producing comparison-band intensities as noisy as standard bands centered at 100 Hz and 200 Hz with intensities of 60 db SPL and 72 db SPL. Four contours of equal noisiness were developed for one-third octave bands, extending down to 25 Hz and ranging in intensity from approximately 58 db SPL to 86 db SPL. These curves were compared with the contours of equal noisiness of Kryter and Pearsons. In the region of overlap (between 50 Hz and 200 Hz) the agreement was good.

Lawton, B. W.↗

Technology and public policy: The process of technology assessment in the Federal Government

Conclusions drawn from research and a series of recommendations for the improvement of the technology assessment process in Federal agencies are presented. The following topics are discussed: (1) who is doing technology assessment; (2) the organization of technology assessments; (3) disciplines and techniques used in technology; (4) analysis of a sample of technology assessment studies: initiation, disciplines, techniques, costs, scope, purpose, and utilization; (5) gaps and overlaps in governmental assessment of nine major technologies; (6) prerequisites for further improvement of technology assessment; and (7) recommendations.

Coates, V. T.↗

SLAR reconnaissance, Mimika-Eilanden Basin, Southern Trough of Irian Jaya

The SLAR was obtained in early April 1973 by means of an AN/APQ-97 K-band brute-force system. The flight strips are all north-look, with ground-range display, and 60% overlap. The interpretation was compiled on a 1/100,000-scale mosaic, but the actual mapping of contacts, dips, lineaments, and the like, was done on 1/100,000-scale stereo-strips. Initial regional mapping was intended as an aid in determining that part of the Southern Trough most likely to be underlain by relatively unmetamorphosed paralic Kembelangan sandstones ideally interdigitated with marine source and cape shales. SLAR reconnaissance mapping met a subsequent need to rapidly and inexpensively narrow the search to that part of the "fairway' coincident with a favorable structure. The SLAR mosaic clearly displays the Irian mountains, strongly and gently folded foothills belts, and the southern front of the fold belt south of which is a large complex of alluvial fans.

Wing, R. S.↗

Blade row dynamic digital compressor program. Volume 1: J85 clean inlet flow and parallel compressor models

The results are presented of a one-dimensional dynamic digital blade row compressor model study of a J85-13 engine operating with uniform and with circumferentially distorted inlet flow. Details of the geometry and the derived blade row characteristics used to simulate the clean inlet performance are given. A stability criterion based upon the self developing unsteady internal flows near surge provided an accurate determination of the clean inlet surge line. The basic model was modified to include an arbitrary extent multi-sector parallel compressor configuration for investigating 180 deg 1/rev total pressure, total temperature, and combined total pressure and total temperature distortions. The combined distortions included opposed, coincident, and 90 deg overlapped patterns. The predicted losses in surge pressure ratio matched the measured data trends at all speeds and gave accurate predictions at high corrected speeds where the slope of the speed lines approached the vertical.

Tesch, W. A.↗

Orbital electron capture by the nucleus

The theory of nuclear electron capture is reviewed in the light of current understanding of weak interactions. Experimental methods and results regarding capture probabilities, capture ratios, and EC/Beta(+) ratios are summarized. Radiative electron capture is discussed, including both theory and experiment. Atomic wave function overlap and electron exchange effects are covered, as are atomic transitions that accompany nuclear electron capture. Tables are provided to assist the reader in determining quantities of interest for specific cases.

Bambynek, W.↗

Experimental investigation of a double-diffused MOS structure

Self-aligned polysilicon gate technology was applied to double-diffused MOS (DMOS) construction in a manner that retains processing simplicity and effectively eliminates parasitic overlap capacitance because of the self-aligning feature. Depletion mode load devices with the same dimensions as the DMOS transistors were integrated. The ratioless feature results in smaller dimension load devices, allowing for higher density integration with no increase in the processing complexity of standard MOS technology. A number of inverters connected as ring oscillators were used as a vehicle to test the performance and to verify the anticipated benefits. The propagation time-power dissipation product and process related parameters were measured and evaluated. This report includes (1) details of the process; (2) test data and design details for the DMOS transistor, the load device, the inverter, the ring oscillator, and a shift register with a novel tapered geometry for the output stages; and (3) an analytical treatment of the effect of the distributed silicon gate resistance and capacitance on the speed of DMOS transistors.

Lin, H. C.↗

Development of InSb charge-coupled infrared imaging devices: Linear imager

The following results were accomplished in the development of charge coupled infrared imaging devices: (1) a four-phase overlapping gate with 9 transfers (2-bits) and 1.0-mil gate lengths was successfully operated, (2) the measured transfer efficiency of 0.975 for this device is in excellent agreement with predictions for the reduced gate length device, (3) mask revisions of the channel stop metal on the 8582 mask have been carried out with the result being a large increase in the dc yield of the tested devices, (4) partial optical sensitivity to chopped blackbody radiation was observed for an 8582 9-bit imager, (5) analytical consideration of the modulation transfer function degradation caused by transfer inefficiency in the CCD registers was presented, and (6) for larger array lengths or for the insertion of isolated bits between sensors, improvements in InSb fabrication technology with corresponding decrease in the interface state density are required.

Phillips, J. D.↗