Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “averaging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Exploring variability in seasonal average and extreme precipitation using unsupervised machine learning.

Focal Area(s): We will use unsupervised machine learning methods to identify and quantify the influence of large scale natural modes of climate variability to gain insight into the observed and simulated seasonal average and extreme precipitation changes. Science Challenge: A recent paper, led by co-PI Mark Risser, finds that although much of the variability in seasonal average and extreme precipitation over CONUS is unforced, the effect of large-scale modes of circulation variability (such as ENSO, AMO, PNA, etc.) can be detected and attributed. However, it is unclear whether or not unsupervised learning methods can (a) replicate this finding or (b) yield insight into possible nonlinear behavior that was not captured in the initial statistical analysis. Further work would entail extending this framework to other global land areas.

54 ENVIRONMENTAL SCIENCES↗

Industry-Average Performance for Components and Initiating Events at U.S. Commercial Nuclear Power Plants: 2020 Update

This report documents the quantitative results of the current industry-average performance for components and initiating events (IEs) at U.S. commercial nuclear power plants (NPPs). It represents the third update of the original analysis in NUREG/CR-6928 with data through 2020. Continuous characterization and updating of current industry-average performance with the latest industry data available are important steps in maintaining up-to-date risk models. Typically, data from 1998–2002 were used in NUREG/CR-6928, data from 1998–2010 in the first update, data from 1998–2015 in the second update, and data from 2006–2020 in this update, although many IEs required longer periods for adequate characterization of frequencies in all these analyses. As with NUREG/CR-6928 and previous updates, four types of events are covered in this report: component unreliability (e.g., a pump that fails to start or fails to run), component or train unavailability resulting from test or maintenance outages, special event probabilities covering operational issues (e.g., pump restarts and injection valve re-openings during unplanned demands), and IE frequencies. Results (in the form of beta distributions for failure probabilities upon demand and gamma distributions for rates) are used as inputs to the U.S. Nuclear Regulatory Commission standardized plant analysis risk models covering U.S. commercial NPPs.

99 GENERAL AND MISCELLANEOUS↗

Optimal gas cooling with minimal aero-opticaldistortion for next generation high-average-power lasers (Progress report, Year 2)

Next-generation lasers that combine high-peak-power ultrashort pulses with high repetition rates have the potential to efficiently deliver the high-average-power outputs required for inertial fusion energy generation, laser-based particle acceleration, and to generate compact secondary x- and 𝛾-ray radiation sources, among others. The combination of long gain length with high surface-to-volume ratio to remove residual heat makes gas-cooled multi-slab amplifier heads an inherently aperture- and average power scalable technology that enables this new class of solid-state lasers, and their thermal management becomes the most pressing technical challenge. As the index-of refraction depends on the gas density, heat removal from the slab surfaces unavoidably entails scattering of propagated light from regions of high temperature fluctuations. The requirement to maximize convective heat extraction from the gain medium under the constraint of minimum optical aberration of the beam renders amplifier slab cooling a technological challenge at the intersection of aero-optics, fluid-mechanics and heat transfer. The goal of this research is to leverage computational fluid dynamics and aero optics simulations of different levels of fidelity to devise a numerical modeling and optimization framework for gas-cooled multi-slab amplifiers. The project will be conducted in close collaboration with the Advanced Photon Technologies Group at Lawrence Livermore National Laboratory, where a gas-cooled test stand for laser materials and thermal management structures will be developed and installed. The final goal of the collaborative effort is to manufacture and benchmark a physical prototype of an numerically optimized amplifier head design. Measurement data on solid-state and thermo-optical distortions will be used for the validation of the numerical models. The key technical challenge in this multi-objective design problem is that of balancing optimal heat removal with minimal optical distortion. To facilitate computationally efficient design optimization and, at the same time, deepen our basic understanding of the interaction of light with turbulence, a complementary study that combines high and low-fidelity flow simulations and aero-optical models is proposed. Along the lines of these two objectives and solution strategies, the project is organized into two thrusts.

42 ENGINEERING↗

The Average Spectrum Norm and Near-Optimal Tensor Completion

We propose the average spectrum norm to study the minimum number of measurements required to approximate a multidimensional array (i.e., sample complexity) via low-rank tensor recovery. Our focus is on the tensor completion problem, where the aim is to estimate a multiway array using a subset of tensor entries corrupted by noise. Our average spectrum norm-based analysis provides near-optimal sample complexities, exhibiting dependence on the ambient dimensions and rank that do not suffer from exponential scaling as the order increases.

97 MATHEMATICS AND COMPUTING↗

Tables of Neutron Thermal Cross Sections, Westcott Factors, Resonance Integrals, Maxwellian Averaged Cross Sections, Astrophysical Reaction Rates, and r-process Abundances Calculated from the ENDF/B-VIII.1, JEFF-3.3, JENDL-5.0, BROND-3.1, and CENDL-3.2 Evaluated Data Libraries

We present calculations of neutron thermal cross sections, Westcott factors, resonance integrals, Maxwellian-averaged cross sections, astrophysical reaction rates, and solar system r-process abundances using the latest data from the major evaluated nuclear libraries for 849 ENDF target materials. The recent release of ENDF/B-VIII.1 library, progress in 252 Cf(SF) evaluation, extensive analysis of newly-evaluated neutron reaction cross sections, neutron covariances, and improvements in data processing techniques motivated us to calculate the nuclear industry and neutron physics parameters, produce s-process Maxwellian-averaged cross sections and astrophysical reaction rates, extract r-process abundances, systematically calculate uncertainties, and provide additional insights on currently available neutron-induced reaction data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

High average current HVDC electron gun for EIC hadron cooling

A critical R&D initiative for the Electron Ion Collider (EIC) involves the design of an electron gun capable of gen erating a high average current and high-brightness electron beam for the hadron cooler. This is essential to preserve hadron beam quality and achieve the collider’s luminosity target of 1 × 10 34 s −1 cm −2 . For an energy recovery linac (ERL)-based hadron cooler, the gun must deliver a high average current of 98.5 mA, a normalized transverse emittance of less than 2 mm−mrad, and a bunch charge of up to 2.5 nC. This proceeding outlines the high-voltage design of a DC gun operating at 500 kV, with conditioning capability up to 600 kV. The design incorporates several unique fea tures, including the use of inverted ceramic at this voltage level, active cooling for the cathode, and large single-crystal multi-alkali cathodes grown on a silicon carbide substrate. High-brightness electron sources are also pivotal for other ad vanced applications, such as high-intensity gamma sources, future 𝑒 + 𝑒 − colliders, and ultra-deep UV sources for the semiconductor industry. Additionally, this paper provides an overview of the hadron cooling approaches planned or proposed for the EIC.

43 PARTICLE ACCELERATORS↗

ZPR-3 Assembly 6F : A spherical assembly of highly enriched uranium, depleted uranium, aluminum and steel with an average {sup 235}U enrichment of 47 atom %.

Over a period of 30 years, more than a hundred Zero Power Reactor (ZPR) critical assemblies were constructed at Argonne National Laboratory. The ZPR facilities, ZPR-3, ZPR-6, ZPR-9 and ZPPR, were all fast critical assembly facilities. The ZPR critical assemblies were constructed to support fast reactor development, but data from some of these assemblies are also well suited for nuclear data validation and to form the basis for criticality safety benchmarks. A number of the Argonne ZPR/ZPPR critical assemblies have been evaluated as ICSBEP and IRPhEP benchmarks. Of the three classes of ZPR assemblies, engineering mockups, engineering benchmarks and physics benchmarks, the last group tends to be most useful for criticality safety. Because physics benchmarks were designed to test fast reactor physics data and methods, they were as simple as possible in geometry and composition. The principal fissile species was {sup 235}U or {sup 239}Pu. Fuel enrichments ranged from 9% to 95%. Often there were only one or two main core diluent materials, such as aluminum, graphite, iron, sodium or stainless steel. The cores were reflected (and insulated from room return effects) by one or two layers of materials such as depleted uranium, lead or stainless steel. Despite their more complex nature, a small number of assemblies from the other two classes would make useful criticality safety benchmarks because they have features related to criticality safety issues, such as reflection by soil-like material. ZPR-3 Assembly 6 consisted of six phases, A through F. In each phase a critical configuration was constructed to simulate a very simple shape such as a slab, cylinder or sphere that could be analyzed with the limited analytical tools available in the 1950s. In each case the configuration consisted of a core region of metal plates surrounded by a thick depleted uranium metal reflector. The average compositions of the core configurations were essentially identical in phases A - F. ZPR-3 Assembly 6F (ZPR-3/6F), the final phase of the Assembly 6 program, simulated a spherical core with a thick depleted uranium reflector. ZPR-3/6F was designed as a fast reactor physics benchmark experiment with an average core {sup 235}U enrichment of approximately 47 at.%. Approximately 81.4% of the total fissions in this assembly occur above 100 keV, approximately 18.6% occur below 100 keV, and essentially none below 0.625 eV - thus the classification as a 'fast' assembly. This assembly is Fast Reactor Benchmark No. 7 in the Cross Section Evaluation Working Group (CSEWG) Benchmark Specifications and has historically been used as a data validation benchmark assembly. Loading of ZPR-3/6F began in late December 1956, and the experimental measurements were performed in January 1957. The core consisted of highly enriched uranium (HEU) plates, depleted uranium plates, perforated aluminum plates and stainless steel plates loaded into aluminum drawers, which were inserted into the central square stainless steel tubes of a 31 x 31 matrix on a split table machine. The core unit cell consisted of three columns of 0.125 in.-wide (3.175 mm) HEU plates, three columns of 0.125 in.-wide depleted uranium plates, nine columns of 0.125 in.-wide perforated aluminum plates and one column of stainless steel plates. The maximum length of each column of core material in a drawer was 9 in. (228.6 mm). Because of the goal to produce an approximately spherical core, core fuel and diluent column lengths generally varied between adjacent drawers and frequently within an individual drawer. The axial reflector consisted of depleted uranium plates and blocks loaded in the available space in the front (core) drawers, with the remainder loaded into back drawers behind the front drawers. The radial reflector consisted of blocks of depleted uranium loaded directly into the matrix tubes. The assembly geometry approximated a reflected sphere as closely as the square matrix tubes, the drawers and the shapes of fuel and diluent plates allowed. According to the logbook and loading records for ZPR-3/6F, the reference critical configuration was loading 5 which was critical on January 4, 1957. The subsequent loadings were very similar but were less clean for criticality because there were modifications made to accommodate reactor physics measurements other than criticality. Accordingly, ZPR-3/6F loading 5 was selected as the only configuration for this benchmark. As documented below, it was determined to be acceptable as a criticality safety benchmark experiment. A very accurate transformation to a simplified model is needed to make any ZPR assembly a practical criticality-safety benchmark. There is simply too much geometric detail in an exact (as-built) model of a ZPR assembly. This is especially true of ZPR-3/6F because of the complex core loading required to approximate a sphere with rectangular plates in a square matrix.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The relationship between below average cognitive ability at age 5 years and the child’s experience of school at age 9

Background At age 5, while only embarking on their educational journey, substantial differences in children’s cognitive ability will already exist. The aim of this study was to examine the causal association between below average cognitive ability at age 5 years and child-reported experience of school and self-concept, and teacher-reported class engagement and emotional-behavioural function at age 9 years. Methods This longitudinal cohort study used data from 7,392 children in the Growing Up in Ireland Infant Cohort, who had completed the Picture Similarities and Naming Vocabulary subtests of the British Abilities Scales at age 5. Principal components analysis was used to produce a composite general cognitive ability score for each child. Children with a general cognitive ability score more than 1 standard deviation (SD) below the mean at age 5 were categorised as ‘Below Average Cognitive Ability’ (BACA), and those scoring above this as ‘Typical Cognitive Development’ (TCD). The outcomes of interest, measured at age 9, were child-reported experience of school, child’s self-concept, teacher-reported class engagement, and teacher-reported emotional behavioural function. Binary and multinomial logistic regression models were used to examine the association between BACA and these outcomes. Results Compared to those with TCD, those with BACA had significantly higher odds of never liking school [Adjusted odds ratio (AOR) 1.82, 95% CI 1.37–2.43, p < 0.001], of being picked on (AOR 1.27, 95% CI 1.09–1.48) and of picking on others (AOR 1.53, 95% CI 1.27–1.84). They had significantly higher odds of experiencing low self-concept (AOR 1.20, 95% CI 1.02–1.42) and emotional-behavioural difficulties (AOR 1.34, 95% CI 1.10–1.63, p = 0.003). Compared to those with TCD, children with BACA had significantly higher odds of hardly ever or never being interested, motivated and excited to learn (AOR 2.29, 95% CI 1.70–3.10). Conclusion Children with BACA at school-entry had significantly higher odds of reporting a negative school experience and low self-concept at age 9. They had significantly higher odds of having teacher-reported poor class engagement and problematic emotional-behavioural function at age 9. The findings of this study suggest BACA has a causal role in these adverse outcomes. Early childhood policy and intervention design should be cognisant of the important role of cognitive ability in school and childhood outcomes.

Bowe, Andrea K.↗

AVERAGE SPATIAL DISTRIBUTION OF COSMIC RAYS BEHIND THE INTERPLANETARY SHOCK—GLOBAL MUON DETECTOR NETWORK OBSERVATIONS

We analyze the galactic cosmic ray (GCR) density and its spatial gradient in Forbush Decreases (FDs) observed with the Global Muon Detector Network (GMDN) and neutron monitors (NMs). By superposing the GCR density and density gradient observed in FDs following 45 interplanetary shocks (IP-shocks), each associated with an identified eruption on the Sun, we infer the average spatial distribution of GCRs behind IP-shocks. We find two distinct modulations of GCR density in FDs, one in the magnetic sheath and the other in the coronal mass ejection (CME) behind the sheath. The density modulation in the sheath is dominant in the western flank of the shock, while the modulation in the CME ejecta stands out in the eastern flank. This east–west asymmetry is more prominent in GMDN data responding to ∼60 GV GCRs than in NM data responding to ∼10 GV GCRs, because of the softer rigidity spectrum of the modulation in the CME ejecta than in the sheath. The geocentric solar ecliptic- y component of the density gradient, G {sub y}, shows a negative (positive) enhancement in FDs caused by the eastern (western) eruptions, while G {sub z} shows a negative (positive) enhancement in FDs caused by the northern (southern) eruptions. This implies that the GCR density minimum is located behind the central flank of IP-shocks and propagating radially outward from the location of the solar eruption. We also confirmed that the average G {sub z} changes its sign above and below the heliospheric current sheet, in accord with the prediction of the drift model for the large-scale GCR transport in the heliosphere.

79 ASTRONOMY AND ASTROPHYSICS↗

Dynamical and Radiative Properties of X-Ray Pulsar Accretion Columns: Phase-averaged Spectra

The availability of the unprecedented spectral resolution provided by modern X-ray observatories is opening up new areas for study involving the coupled formation of the continuum emission and the cyclotron absorption features in accretion-powered X-ray pulsar spectra. Previous research focusing on the dynamics and the associated formation of the observed spectra has largely been confined to the single-fluid model, in which the super-Eddington luminosity inside the column decelerates the flow to rest at the stellar surface, while the dynamical effect of gas pressure is ignored. In a companion paper, we have presented a detailed analysis of the hydrodynamic and thermodynamic structure of the accretion column obtained using a new self-consistent model that includes the effects of both gas and radiation pressures. In this paper, we explore the formation of the associated X-ray spectra using a rigorous photon transport equation that is consistent with the hydrodynamic and thermodynamic structure of the column. We use the new model to obtain phase-averaged spectra and partially occulted spectra for Her X-1, Cen X-3, and LMC X-4. We also use the new model to constrain the emission geometry, and compare the resulting parameters with those obtained using previously published models. Our model sheds new light on the structure of the column, the relationship between the ionized gas and the photons, the competition between diffusive and advective transport, and the magnitude of the energy-averaged cyclotron scattering cross-section.

79 ASTRONOMY AND ASTROPHYSICS↗

Computer program generates averaged value data tapes

Computer program generates a magnetic output tape containing time and averaged data values of a specified number of major frames over a specified time interval. A decommutation system is used to acquire the raw data, which is then reformatted and averaged.

Watkins, F. L.↗

Pulse-rate averaging circuit

Averaging circuit provides a secondary control signal during inoperative periods of an intermittent primary control system. It can also provide an average pulse rate over a fixed time interval, such as in a digital frequency meter.

Jessee, R. D.↗

Average solar wind proton properties from Pioneers 6 and 7.

Distributions and average values for the proton speed, azimuthal and polar flow directions, and the proton temperature and density in the solar wind are presented. The data are obtained from the Ames plasma probes on Pioneers 6 and 7. The time periods covered include Dec. 18, 1965 to mid-February 1966, and mid-August to mid-October 1966. The distributions of the parameters, except for the polar flow direction, are skewed, partially because of stream-stream interactions in the solar wind. The average values of the basic plasma parameters from the two spacecraft are different which could be due partially to different solar activity at the two times, and partially to sector and beam structure dependence.

Mihalov, J. D.↗

Further comments on the application of the method of averaging to the study of the rotational motions of a triaxial rigid body, part 3

Variational equations were applied to the case of a rapidly spinning triaxial body moving in an elliptic orbit, in which the orbital plane is regressing at a constant rate. The explicit differential equations obtained in this application were integrated by the method of averaging to develop secular analytical expressions, which, to first-order in a small parameter, describe the complete space motions of the rigid body under the influence of nonresonant gravity-gradient perturbations. The effects of aerodynamic torque on the rotational motion of an orbiting satellite are studied, as another example of the application of the variational equations derived and the method of averaging.

Liu, J. J. F.↗

The average motion of a charged particle in a dipole field

The numerical representation of the average motion of a charged particle trapped in a geomagnetic field is developed. An assumption is made of the conservation of the first two adiabatic invariants where integration is along a field line between mirror points. The averaged motion also involved the parameters defining the magnetic field line to which the particle is attached. Methods involved in obtaining the motion in the equatorial plane of model magnetospheres are based on Hamiltonian functions. The restrictions imposed by the special nature of the dipole field are defined.

Chen, A. J.↗

Solar flare proton spectrum averaged over the last 5000 years

The solar flare differential energy spectrum and integral proton flux above 10 MeV averaged over the last several thousand years are derived from thermoluminescence (TL) data. The dose-rate depth profile is obtained using a new TL equilibrium technique which is independent of the TL decay kinetics. The dose-rate depth profile produced by solar flare protons with a differential energy spectrum of the form dJ/dE = KE to the minus gamma power is calculated for arbitrary gamma. The best fit to the TL data in rock 14310 is obtained for gamma = 2.3 plus or minus 0.2 and an omnidirectional (4 pi) integral flux above 10 MeV of 40 to 80 prot/sq cm/sec. The TL half-life is determined to be 2000 yr. These results are compared to those for Na-22 (half-life of. 2.6 yr) and Al-26 (half-life of 740,000 yr) obtained by Wahlen et al. (1972) and Rancitelli et al. (1972), and it is concluded that the spectral shape and flux of protons in the interval from 25 to 100 MeV is the same within experimental errors when averaged over these three very different time periods.

Hoyt, H. P., Jr.↗

Analysis of aperture averaging measurements

Laser scintillation data obtained by the NASA Goddard Space Flight Center balloon flight no. 5 from White Sands Missile Range on 19 October 1973 are analyzed. The measurement data, taken with various size receiver apertures, were related to predictions of aperture averaging theory, and it is concluded that the data are in reasonable agreement with theory. The following parameters are assigned to the vertical distribution of the strength of turbulence during the period of the measurements (daytime), for lambda = 0.633 microns, and the source at the zenith; the aperture averaging length is d sub o = 0.125 m, and the log-amplitude variance is (beta sub l)2 = 0.084 square nepers. This corresponds to a normalized point intensity variance of 0.40.

Fried, D. L.↗