SEARCH · Engineering Papers

Results for “WEC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Survivability Enhancement of a Multi-Mode Point Absorber (CRADA CRD-16-631 Final Report)

The overall goal of the project is to design and validate a survival mode for the Triton wave energy converter (WEC), as shown in Figure 1, which allows for a reduction in system peak structural stresses by 50% compared to those experienced when the heave-plate is deployed in the operational configuration, while simultaneously allowing for a reduction of capital cost by 15% due to the elimination of overdesign to account for uncertainty. In addition, the project will seek to carefully understand performance of the design without survival mode engaged under extreme wave conditions so as to better understand how system loads vary and hence determine conditions where survival mode.

16 TIDAL AND WAVE POWER↗

DOE OSTI2020

LandRAY Final Report

The overarching Project objective is to demonstrate the feasibility of using an innovative Power Take-Off (PTO) Module, to be used in the Columbia Power Technologies, Inc. (C·Power) utility-scale wave energy converter (WEC). The PTO Module uniquely combines a large-diameter, direct-drive, rotary permanent magnet generator; a patent-pending rail-bearing system; and a corrosion-resistant fiber-reinforced-plastic structure. The rail bearing system allows for: • A flexible non-rigid and low-cost generator frame as compared to conventional machines. • A reduction of air gap and consequently lower cost electromagnetic design • Ability to reduce costs by increasing diameter to much larger dimensions, while maintaining the small air gap. • A direct drive electro-mechanical solution that is the fastest and most precise approach for responding to the dynamic variability of forces from wave energy. The land-based test of the PTO Module (DDP1) will provide an important risk reduction phase, to demonstrate the reliability and feasibility of a large-diameter, small air-gap generator that is capable of delivering high efficiency, fault-tolerance and relatively simple "at-sea" maintenance capabilities – qualities that are essential for cost-effective wave energy devices. This is the first known test of such a system.

16 TIDAL AND WAVE POWER↗

DOE OSTI2026

Evaluation of 1/100-Scale Mooring Systems for Wave Energy Converters

This study evaluates the feasibility, accuracy, and limitations of using 1/100th scale physical mooring systems to represent full-scale mooring behavior for wave energy converters (WECs) during small-scale tank testing. The work focuses on an RM3-style point absorber deployed in conditions representative of the PacWave South test site and examines whether small-scale physical testing can reliably inform numerical modeling, design decisions, and future prototype development. Overall, this study concludes that small-scale (1/100th) physical mooring models can provide valuable qualitative insights, including relative comparisons between mooring types and trends in device behavior, but cannot reliably replicate full-scale mooring loads or dynamic response without significant scaling distortion. Physical tests at this scale are most appropriate for motion characterization and model validation within known limitations, not for deriving absolute mooring loads or final engineering design values. Key lessons learned emphasize the importance of improved instrumentation strategies, iterative wave tank tuning, more precisely manufactured scaled mooring components, and enhanced anchoring systems to reduce experimental uncertainty.

16 TIDAL AND WAVE POWER↗

DOE OSTI2025

Real-Time Wave Energy Converter Control Using Instantaneous Frequency

Wave Energy Converters (WECs) rely on effective Power Take-Off (PTO) control strategies to maximize energy absorption under dynamic sea conditions. Traditional hydrodynamic modeling techniques may require computationally intensive convolution calculations, making real-time control implementation challenging. This paper presents an alternative approach by leveraging instantaneous frequency estimation to dynamically adjust PTO damping in response to varying wave frequencies. Two real-time frequency estimation methods are explored: the Hilbert Transform (HT) and Phase-Locked Loop (PLL). The Hilbert Transform method provides accurate frequency tracking but introduces a delayed response due to its dependence on causal data. Conversely, the PLL approach demonstrates strong potential in frequency tracking but requires careful gain tuning, particularly in complex sea states. Comparative evaluations across multiple test cases—including sinusoidal variations, amplitude steps, frequency step changes, and real-world JONSWAP spectrum waves—highlight the strengths and limitations of each method. The two different PTO control techniques across the various frequency estimation methods were tested under real-sea states using a state-space model of a point-absorbing Wave Energy Converter. The Capture Width Ratio (CWR) is used as a performance metric, with results showing that the HT achieves a 10.6% improvement, while the PLL estimation yields a 0.9% improvement relative to the fixed parameter control baseline. These results highlight the effectiveness of real-time frequency estimation in improving energy absorption compared to static control parameters.

WEC control↗

DOE OSTI2025

Framework for Assessing Impact of Wave-Powered Desalination on Resilience of Coastal Communities

Coastal communities face unique challenges in maintaining continuous service from critical infrastructure. This research advances capabilities for evaluating the impact of using wave energy to desalinate water on the resilience of coastal communities. The study focuses on the feasibility of using wave energy conversion to provide drinking water to communities in need and applying resilience metrics to quantify its impact on the community. To assess the feasibility of wave-powered desalination, this research couples the open-source software Wave Energy Converter SIMulator (WEC-Sim) and Water Network Tool for Resilience (WNTR). This research explores variations in both the wave resource (location, seasonality, and duration) and the ability to maintain drinking water service during a disruption scenario by applying the simulation framework to three case studies, which are based on communities in Puerto Rico. The simulation framework provides a contextualized assessment of the ability of wave-powered desalination to improve the resilience of coastal communities, which can serve as a methodology for future studies seeking the integration of wave-powered desalination with water distribution systems.

16 TIDAL AND WAVE POWER↗

DOE OSTI2023

Wave Energy Power Take-off Validation with a Hydraulicly Actuated Rotary Dynamometer and a Bi-Directional High-Power DC Supply

There are many organizations working towards the commercialization of wave energy converter technologies and are advancing their designs through the technology readiness levels (TRLs). A critical step before the field deployment of prototype wave energy converters is the validation of the subsystems and components that are contained in the wave energy converter through laboratory testing and performance characterization. In 2021, the National Renewable Energy Laboratory (NREL) developed and demonstrated a system for testing power takeoffs (PTO) with a low-speed, high-torque dynamometer and a grid-tied high-power DC power source and sink before field deployment. The hydraulic dynamometer allows for the simulation of PTO actuation from wave motion and is capable of a wide range of wave periods and heights which are represented as various speeds and torques from the dynamometer. The high-power bidirectional power supply allows for hardware in the loop and controller in the loop testing to be conducted on WEC power electronics. This presentation was made to describe the methods used by NREL research staff to test all components and sub-systems in the PTO of a novel wave energy converter before field deployment.

dynamometer↗

DOE OSTI2023

Wave Energy Power Take-Off Validation with a Hydraulicly Actuated Rotary Dynamometer and a Bidirectional High-Power DC Supply: Preprint

dynamometer↗

DOE OSTI2024

NREL Marine Energy Desalination R&D Portfolio

The National Renewable Energy Laboratory (NREL), in collaboration with the U.S. Department of Energy's (DOE's) Water Power Technologies Office (WPTO), has developed a unique R&D approach to advance marine energy desalination. Desalination is a foundational investment within WPTO's Powering the Blue EconomyTM portfolio [1], and was the first investment within this portfolio. NREL's marine energy desalination spans techno-economic feasibility studies, numerical modeling, and laboratory testing at the component and subsystem level, as well as development of the Hydraulic and Electric Reverse Osmosis Wave Energy Converter (HERO WEC). This multilayered approach enables an innovative feedback loop where the data and lessons learned from laboratory and field experiments are used to refine modeling tools and analysis techniques, prioritize out-year activities, and refine strategic directions within NREL and across the WPTO portfolio. The primary objective of the NREL-led research is to identify key barriers associated with the commercialization of wave-powered desalination and develop solutions that can be adopted by the marine energy industry. It should be noted, while WPTO's marine energy portfolio includes wave, tidal, ocean current, thermal gradients, and pressure gradients the bulk of the marine energy desalination work has been focused on wave powered desalination. In parallel, these R&D activities can help inform technical assistance and support of industry and academic technologies. These two tracks help build a common solver community approach, while also identifying key stakeholders, government agencies, and other organizations outside of the marine sector that will be necessary for developing a robust industry.

desalination↗

DOE OSTI2024

The Design, Fabrication, and Test Program for NREL's Wave-Powered Desalination System

Starting in 2018, the U.S. Department of Energy's Water Power Technologies Office (WPTO), initiated the development of a prize competition as a foundational investment of Powering the Blue Economy, the prize encouraged the development of small, modular, cost-competitive wave-powered desalination systems. The National Renewable Energy Laboratory (NREL) was tasked with managing the prize, known as the Waves to Water Prize (W2W), and providing technical input based on prior desalination research performed at the lab. NREL partnered with the Coastal Studies Institute (CSI) and Jennette's Pier in North Carolina for their expertise in deploying research articles at the Jennette's Pier research facility. The prize consisted of five stages that included high-level concept proposals, numerical modelling, site-specific design, subsystem prototyping, and a final ocean demonstration. Due to the logistical risks of installing numerous prototypes in the ocean at the same time, NREL was tasked with designing and building a test article to de-risk the final event. The test article design needed to represent the technologies expected in the final stage of the prize. This meant that the design was expected to follow the same rules as the competitors, providing CSI with an opportunity to practice installations and develop a final logistics plan prior to the final event. After concluding the W2W event in April 2022, the NREL test article was redeployed in August 2022 to better understand the challenges of anchoring wave energy converters (WECs) in shallow water conditions with breaking waves.

desalination↗

DOE OSTI2018

Electrical cable utilization for wave energy converters

Here, this paper investigates the suitability of sizing the electrical export cable based on the rating of the contributing WECs within a farm. These investigations have produced a new methodology to evaluate the probabilities associated with peak power values on an annual basis. It has been shown that the peaks in pneumatic power production will follow an exponential probability function for a linear model. A methodology to combine all the individual probability functions into an annual view has been demonstrated on pneumatic power production by a Backward Bent Duct Buoy (BBDB). These investigations have also resulted in a highly simplified and perfunctory model of installed cable cost as a function of voltage and conductor cross-section. This work solidifies the need to determine electrical export cable rating based on expected energy delivery as opposed to device rating as small decreases in energy delivery can result in cost savings.

16 TIDAL AND WAVE POWER↗

DOE OSTI2021

A comparison of efficiency-aware model-predictive control approaches for wave energy devices

In this study, we compare four different formulations of model predictive control that attempt to maximise electrical power generated by a wave energy converter (WEC). Control laws include (1) pure maximisation of mechanical power, (2) maximisation of mechanical power with a control penalty factor, (3) maximisation of electrical power using power conversion efficiency, and (4) maximisation of electrical power using the full electro-mechanical model of a system. For this study, a wave-to-wire model is developed for a floating spherical buoy connected to a permanent magnet synchronous generator. The performance of the controllers, including the mechanical and electrical power outputs, is compared in irregular wave conditions for the unconstrained and force-constrained scenarios. The results demonstrate that the controller designed to maximise mechanical power is not suitable for practical applications and may lead to negative electrical power output due to the non-ideal power take-off efficiency. Moreover, the replacement of the power take-off dynamics by the efficiency coefficient does not guarantee the maximum electrical power production.

16 TIDAL AND WAVE POWER↗

DOE OSTI2015

Magnetically charged regular black hole in a model of nonlinear electrodynamics

We obtain a magnetically charged regular black hole in general relativity. The source to the Einstein field equations is nonlinear electrodynamic field in a physically reasonable model of nonlinear electrodynamics (NED). “Physically” here means the NED model is constructed on the basis of three conditions: the Maxwell asymptotic in the weak electromagnetic field limit; the presence of vacuum birefringence phenomenon; and satisfying the weak energy condition (WEC). In addition, we analyze the thermodynamic properties of the regular black hole in two ways. According to the usual black hole thermodynamics, we calculate the heat capacity at constant charge, from which we know the smaller black hole is more stable. We also employ the horizon thermodynamics to discuss the thermodynamic quantities, especially the heat capacity at constant pressure.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2019

Wave tank and bench-top control testing of a wave energy converter

An increasing number of experiments are being conducted to study the design and performance of wave energy converters. Often in these tests, a real-time realization of prospective control algorithms is applied in order to assess and optimize energy absorption as well as other factors. This paper details the design and execution of an experiment for evaluating the capability of a model-scale WEC to execute basic control algorithms. Model-scale hardware, system, and experimental design are considered, with a focus on providing an experimental setup capable of meeting the dynamic requirements of a control system. To more efficiently execute such tests, a dry bench testing method is proposed and utilized to allow for controller tuning and to give an initial assessment of controller performance; this is followed by wave tank testing. The trends from the dry bench test and wave tank test results show good agreement with theory and confirm the ability of a relatively simple feedback controller to substantially improve energy absorption. Additionally, the dry bench testing approach is shown to be an effective and efficient means of designing and testing both controllers and actuator systems for wave energy converters.

16 TIDAL AND WAVE POWER↗

DOE OSTI2015

Decentralized control of units in smart grids for the support of renewable energy supply

Due to the significant environmental impact of power production from fossil fuels and nuclear fission, future energy systems will increasingly rely on distributed and renewable energy sources (RES). The electrical feed-in from photovoltaic (PV) systems and wind energy converters (WEC) varies greatly both over short and long time periods (from minutes to seasons), and (not only) by this effect the supply of electrical power from RES and the demand for electrical power are not per se matching. In addition, with a growing share of generation capacity especially in distribution grids, the top-down paradigm of electricity distribution is gradually replaced by a bottom-up power supply. This altogether leads to new problems regarding the safe and reliable operation of power grids. In order to address these challenges, the notion of Smart Grids has been introduced. The inherent flexibilities, i.e. the set of feasible power schedules, of distributed power units have to be controlled in order to support demand–supply matching as well as stable grid operation. Controllable power units are e.g. combined heat and power plants, power storage systems such as batteries, and flexible power consumers such as heat pumps. By controlling the flexibilities of these units we are particularly able to optimize the local utilization of RES feed-in in a given power grid by integrating both supply and demand management measures with special respect to the electrical infrastructure. In this context, decentralized systems, autonomous agents and the concept of self-organizing systems will become key elements of the ICT based control of power units. In this contribution, we first show how a decentralized load management system for battery charging/discharging of electrical vehicles (EVs) can increase the locally used share of supply from PV systems in a low voltage grid. For a reliable demand side management of large sets of appliances, dynamic clustering of these appliances into uniformly controlled appliance sets is necessary. We introduce a method for self-organized clustering for this purpose and show how control of such clusters can affect load peaks in distribution grids. Subsequently, we give a short overview on how we are going to expand the idea of self-organized clusters of units into creating a virtual control center for dynamic virtual power plants (DVPP) offering products at a power market. For an efficient organization of DVPPs, the flexibilities of units have to be represented in a compact and easy to use manner. We give an introduction how the problem of representing a set of possibly 10{sup 100} feasible schedules can be solved by a machine-learning approach. In summary, this article provides an overall impression how we use agent based control techniques and methods of self-organization to support the further integration of distributed and renewable energy sources into power grids and energy markets. - Highlights: • Distributed load management for electrical vehicles supports local supply from PV. • Appliances can self-organize into so called virtual appliances for load control. • Dynamic VPPs can be controlled by extensively decentralized control centers. • Flexibilities of units can efficiently be represented by support-vector descriptions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2021

Design and testing of a free floating dual flap wave energy converter

With a wide variety of wave energy device archetypes currently under consideration, it is a major challenge to ensure that research findings and methods are broadly applicable. In particular, the design and testing of wave energy control systems, a process which includes experimental design, empirical modeling, control design, and performance evaluation, is of interest. This goal motivated the redesign and testing of a floating dual flap wave energy converter. As summarized in this paper, the steps taken in the design, testing, and analysis of the device mirrored those previously demonstrated on a three-degree of freedom point absorber device. The method proposed does not require locking WEC degrees of freedom to develop an excitation model, and presents a more attainable system identification procedure for at-sea deployments. The results show that the methods employed work well for this dual flap device, lending additional support for the broad applicability of the design and testing methods applied here. The aim of this paper is to demonstrate that these models are particularly useful for deducing areas of device design or controller implementation that can be reasonably improved to increase device power capture.

16 TIDAL AND WAVE POWER↗

DOE OSTI2017

A comparison of control strategies for wave energy converters

In this study, we employ a numerical model to compare the performance of a number of wave energy converter control strategies. The controllers selected for evaluation span a wide range in their requirements for implementation. Each control strategy is evaluated using a single numerical model with a set of sea states to represent a deployment site off the coast of Newport, OR. A number of metrics, ranging from power absorption to kinematics, are employed to provide a comparison of each control strategy’s performance that accounts for both relative benefits and costs. The results show a wide range of performances from the different controllers and highlight the need for a holistic design approach which considers control design as a parallel component within the larger process WEC design.

13 HYDRO ENERGY↗

DOE OSTI2025

Development and application of two-step uncertainty propagation and sensitivity analysis methodology for fast reactor safety analysis

Uncertainty quantification (UQ) in nuclear reactors for transients is directly linked with safety assessment through the cross-sections uncertainties, provided as a covariance matrix, which are propagated through the reactor system to output of interest pertaining to reactor safety, such as peak temperatures in fuel/clad/coolant. Using a two-step approach, uncertainties are first quantified and propagated from basic input variables (such as reaction cross-sections) to intermediate quantities (such as reactivity feedback coefficients) through lattice level calculations. Uncertainties of intermediate quantities (from the first step) are then propagated through the system transient calculations, in the second step, to obtain uncertainties on reactor safety output parameters of interest. The scope of this work consists of Uncertainty Quantification & Propagation of nuclear data uncertainties that are highly correlated through unprotected transient overpower and unprotected loss of flow to assess their impact on core safety parameters. This two-step approach in the presence of covariance renders the sensitivity analysis very challenging. In fact, usually the sensitivity analysis is restricted to each step, which limits its application since the sensitivities between the system output quantities and the basic input variables are difficult to obtain. Here, in this work, we address this issue by proposing a simple, general methodology to combine the sensitivity indices obtained in each step by assuming the model behavior being linear. For the first step Generalized Perturbation theory based indices are used while in the second step the recently studied Johnson indices. The uncertainty quantification and sensitivity methodologies discussed here are demonstrated on a generic LFR design which is based on the 500 MWth demonstration Lead-cooled fast reactor (DLFR) using oxide fuel, developed by Westinghouse Electric Company (WEC).

42 - ENGINEERING↗

DOE OSTI2019

Load shedding characteristics of an oscillating surge wave energy converter with variable geometry

This study reports on performance and load shedding capabilities of an oscillating surge wave energy converter (OSWEC) that utilizes adjustable geometry to control hydrodynamic coefficients. The body consists of a bottom-hinged rectangular paddle in which the frame holds five horizontal flaps spanning the interior of the frame. Each flap can rotate independently about its center of rotation to alter hydrodynamic coefficients. A 1:14 scale model was built for wave tank tests where the OSWEC's natural response to regular waves was measured. Tests with the paddle fixed vertically were conducted to measure the moment induced by incident waves. Conclusions were compared to numerical simulations which determined that flap orientation significantly affected wave energy transmission past the device. Numerical simulations with the addition of a linear rotational damper power take-off (PTO) suggested that with flaps open, the resistive moment was reduced by up to 47%, the surge force on the foundation up to 55%, and the capture width up to 72% over a range of wave periods and PTO damping values. The experimental nondimensional excitation moments and reflection coefficients were reduced by up to 54%. Overall, the flaps provide mechanical means to reduce loads, thus improving the design life of a WEC system.

16 TIDAL AND WAVE POWER↗