Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STEELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Drawing Direction Effect on Microstructure and Mechanical Properties of Twinning-Induced Plasticity Steel During Wire Drawing

The effect of drawing direction on microstructure and mechanical properties in twinning-induced plasticity (TWIP) steel during wire drawing has been investigated to improve drawability for wire rod applications. The steel wires subjected to unidirectional (UD) and reverse-directional (RD) wire drawing were analyzed. The yield and tensile strength processed by the RD were slightly higher than those by the UD, whereas the ductility and drawability have inverse features, which is totally different from the results of plain carbon steel and Al wire. Although final shear strain of wires deformed by the RD is lower than that by the UD, the RD wires had a more complex stress history and a higher <111> texture component at the surface area, which encouraged twinning rate, resulting in fast exhaustion of ductility, finally earlier fracture of wires. In contrast to the materials deformed by mainly slip mechanism, the RD process cannot improve the ductility and drawability in TWIP steel due to the stress state dependency of twinning mechanism. Also, based on the different strengthening behaviors between pearlitic and TWIP steels during UD and RD, it is induced that microstructure and applied stress state simultaneously control the mechanical properties.

36 MATERIALS SCIENCE↗

Development of Texture in Ultrafine-Grained Low-Carbon Steel Processed through Equal-Channel Angular Pressing

Developments of microstructures and texture are investigated for a low-carbon steel deformed by equal-channel angular pressing (ECAP) at room temperature for equivalent strain (ε{sub vm}) of 16.8. ECAP at ε{sub vm} = 0.6 reduces grain size by two orders of magnitude. With increasing strain, grain size reduces further and high-angle grain boundary (HAGB) fraction improves by grain subdivision and its change in orientation. ECAP of low-carbon steel up to ε{sub vm} = 16.8 can produce ultrafine grains of 0.2 µm size with HAGB fraction of 82%. The as-received steel has low texture index. Microstructural changes strongly influence texture development. It increases with equivalent strain as grain subdivision continues. Texture index fluctuates at intermediate strain range due to randomization of initial texture. Texture index reaches saturation at the high equivalent strain. On ECAP at low to intermediate strain ε{sub vm} = 0.6-6, components of both α (F{sub θ}, J{sub θ}, and J-bar {sub θ}) and γ (D{sub 1θ}, D{sub 2θ}, and E{sub θ}) fibers are developed though all of them deviate from their ideal positions. At higher strain (ε{sub vm} = 9-16.8), the γ fiber components (D{sub 1θ}, D{sub 2θ}, E{sub θ}) are strengthened, and the E{sub θ} component reaches the highest intensity of ≈ 17 at ε{sub vm} = 12. There is no texture symmetry at low to high strain level. The presence of pearlite in low-carbon steel enhances strongly the deviation of texture components from their ideal positions in Euler’s space as well as it increases the intensities of the components more than that of IF steel for a similar equivalent strain.

36 MATERIALS SCIENCE↗

Mechanical and Electrochemical Behavior of Dual-Phase Steels Having Varying Ferrite–Martensite Volume Fractions

Dual-phase (DP) steels behave differently under corrosive environment depending upon the volume fractions of phases, mainly martensite, ferrite and bainite. The mechanical behavior and corrosion resistance of DP steels with varying martensite (from 32 to 100%) are investigated. The increase in martensite volume fraction of DP steel results in significant improvement in tensile strength and hardness with a subsequent reduction in elongation. Unlike the mechanical behavior, the increase in martensite volume fraction in steel does not exhibit a direct relationship with their corrosion resistance behavior. The corrosion mechanism in DP steels having different martensite and ferrite volume fractions depends on the self-corrosion resistance behavior of both the phases as well as the occurrence of galvanic corrosion between them.

36 MATERIALS SCIENCE↗

Studies on Ti, Zn and Ti + Zn Bilayer Coatings on Interstitial Free Steel for Enhancement of Wear and Corrosion Resistance

The present study concerns a detailed investigation of the microstructure, phase identity, composition, residual stress, wear and corrosion behavior of Ti, Zn and Zn + Ti coatings developed on IF steel by sputter deposition technique. A significant improvement in average microhardness (350-700 VHN) is noticed following sputter deposition compared to that of as-received IF steel (190 VHN). The highest microhardness recorded is 500 VHN for Ti, 350 VHN for Zn and 700 VHN for Ti + Zn bilayer, respectively. Improvement in surface hardness is accompanied by a marked improvement in wear resistance of the sputter-deposited surface against hardened steel ball. The corrosion rate of coated sample in 3.56 wt.% NaCl solution is marginally decreased (2.95 × 10{sup −2} to 3.25 × 10{sup −2} mm/year) as compared to that of as-received IF steel (3.55 × 10{sup −2} mm/year). Ti-deposited IF steel registers the minimum corrosion rate (2.95 × 10{sup −2} mm/year) among all the coated samples.

36 MATERIALS SCIENCE↗

Effect of Heating Rate during Continuous Annealing on Microstructure and Mechanical Properties of High-Strength Dual-Phase Steel

The study concerns the influence of heating rate during continuous annealing on microstructure and mechanical properties of high-strength ferrite–martensite dual-phase (DP) steel. The study suggests that the superheat (ΔT), carbon diffusion and distribution were strongly influenced by increasing the heating rate, leading to different microstructure and mechanical properties of DP steel. The morphology of martensite was observed to shift from network along ferrite grain boundaries to banded structure to uniformly dispersed, and the average ferrite grain size was refined from 5.3 to 2.0 µm. When the heating rate was 300 °C/s, the steel exhibited excellent mechanical properties with tensile strength (UTS) of 982 MPa, total elongation (TEL) of 17.5%, strength–elongation balance (UTS × TEL) of 17.2 GPa%, because of finer microstructure, uniform martensite distribution and low carbon content of martensite. Moreover, the precipitation strengthening effect of NbC is an important reason for the high-strength DP steels. In addition, the variation in strain-hardening behavior and fracture mechanism of steel subjected to different heating rates is discussed in relation to the microstructure.

36 MATERIALS SCIENCE↗

Workability of High-Strength Automobile Steel at High Temperatures Using Hot Processing Maps and Electron Backscatter Diffraction

Hot deformation behavior of a high-strength steel Docol 1500 Bor was investigated by compression tests on a thermal–mechanical simulator Gleeble 3500. The workability of tested steel was analyzed by building processing maps at three strains based on the test results of flow stresses. The essential deformation mechanism was further studied based on the deformation texture analysis on a scanning electronic microscope with a TSL-OIM™EBSD system. It was found that that strain can affect the workability of the tested steel remarkably. At the engineering strain of 0.6, obvious textures in martensite mainly include recrystallization textures <110>//ND and other texture components <110>//RD and {001} <100>, etc. Dynamic recrystallization and recrystallization texture component <111>//ND in deformed austenite can contribute to increasing the workability of a steel Docol 1500 Bor. Finally, the optimized deformation conditions of the tested steel were obtained.

36 MATERIALS SCIENCE↗

Effect of Boron Micro-alloying on Microstructure and Corrosion Behavior of Dual-Phase Steel

The present work aims to understand the effect of boron (B) as a micro-alloying element on the mechanical properties and corrosion behavior of a dual-phase steel that was prepared from boron-added steel via hot rolling. The ‘B’ micro-alloying increased the volume fraction of martensite from ~ 25 to 50% and improved the hardenability as compared to unalloyed DP steel subjected to similar rolling and heat treatment conditions. The yield strength, tensile strength and corrosion resistance of boron-added DP steel significantly improved from 405 to 690 MPa, 632 to 890 MPa and 0.125 to 0.110 mm/year, respectively, as compared to the unalloyed DP steel.

36 MATERIALS SCIENCE↗

Significance of Finish Cooling Temperature to Microstructure and Property Relationship of Low-Carbon V-N-Cr Microalloyed High-Strength Steel

Herein, three final cooling temperatures were employed to achieve high strength and toughness communication in the V-N-Cr microalloyed steels. This study shows that V-N-Cr microalloyed steel primarily consisted of ferrite, granular bainite, acicular ferrite, and a small quantity of M/A phase at the final cooling temperature of 600 °C, while the polygonal ferrite, lamellar bainite, granular bainite, and a small fraction of acicular ferrite were obtained at 450 °C. The width of lamellar bainite was ~ 200-400 nm, and acicular ferrite was composed of fine non-parallel ferrite platelet structures with high dislocations densities. As the final cooling temperature decreased further, the microstructure included granular bainite and lath bainite at 350 °C. The nanoscale precipitates of V-N-Cr microalloyed steel were divided into two types, large-scale precipitates near the grain boundary that precipitated at high temperatures and small precipitates of diameter 5-10 nm at low temperatures, which significantly contributed toward strength. The hot rolled low-carbon V-N-Cr microalloy steel exhibited optimal mechanical properties at the final rolling temperature of 830 °C, as well the final cooling temperature was 450 °C. The highest yield strength and tensile strength of V-N-Cr microalloyed steel were 835 MPa and 989 MPa, respectively. The outstanding impact toughness of 161 J tested at − 60 °C was received. The transformation strengthening and precipitation hardening played a crucial role in affecting the thermo-mechanical properties.

36 MATERIALS SCIENCE↗

Exploring the tempering behaviour of additively manufactured high-alloy tool steel using synchrotron X-ray and neutron techniques

Post-processing heat treatment provides a critical pathway toward the commercialisation of additively manufactured (AM) S390 high-speed steel, which is a representative high-alloy tool steel employed in precision manufacturing, offering up to 1.5 times longer tool life and over 20% higher cutting speeds compared to conventional grades. In this study, the phase evolution of AM S390 steel during heat treatment, with particular emphasis on carbide precipitation behaviour, was systematically investigated using a combination of synchrotron X-ray and neutron techniques. The metastable M2C carbides were found to dissolve during austenitisation, while the stable primary carbides MC and M6C experienced coarsening with an average size increase of about 60 nm after just 2 min of tempering. Moreover, the austenite lattice parameters reduced from 3.618 to 3.608 Å within the first 10 min of tempering, suggesting carbon depletion in the steel matrix was likely associated with the formation of secondary carbides. This interpretation was substantiated by small-angle scattering results, which revealed the presence of nanoscale precipitates with a volume fraction of 3.1% after 60 min of tempering. These microstructural evolutions collectively accounted for the observed peak hardness of 921 HV. Furthermore, a comparative analysis of synchrotron and neutron small-angle scattering data highlighted the complementary strengths of each technique, offering critical insight into their suitability for characterising nanoscale features in AM high-alloy steels.

Synchrotron X-ray diffraction↗

Graphene - MoS 2 ensembles to reduce friction and wear in DLC-Steel contacts

Recent demonstration of two dimensional (2D) solid lubricant materials to minimize friction to unmeasurable levels (superlubricity) and reduce wear at macroscale propelled further research investigations in the direction of exploring their potential in industrially relevant material combinations such as steel and diamond-like-carbon (DLC) in sliding contact. In this study, we have used a combination of 2D materials i. e. Graphene and MoS 2 as a solid lubricant to reduce friction and wear in steel-hydrogenated DLC contacts even at high contact pressures and sliding speed. Sliding friction tests conducted under dry nitrogen conditions shows a reduction of friction and wear by 16 and 29 times, respectively as compared to Steel vs H-DLC (baseline) experiments and friction and wear by a factor of 43 and 434, respectively, compared to self-mated steel vs steel experiments. In conclusion, optical and Raman investigations of the material pairs and the wear debris analysis in TEM indicated the formation of amorphous carbon mixed graphene layers at the sliding interface leading to such dramatic reductions in friction and wear.

36 MATERIALS SCIENCE↗

Carbon sequestration of steel slag and carbonation for activating RO phase

Carbonation of Ca/Mg minerals in industrial alkaline residues is a technology to sequester CO{sub 2} and reduce its emissions to the atmosphere. In this work, BSE-EDS were used to determine the mineral phase in steel slag; compositions of RO phase were identified and simulated. The carbon sequestration of steel slag was studied, and RO phase was activated by carbonation. Result shows that the amount of CO{sub 2} sequestered in steel slag and RO phase increases as carbonation time increases. Under autoclaving condition, the hydration ratio of MgO in RO phase was 20.10%. Through carbonation, up to 58.83% of MgO in RO phase can be converted into MgCO{sub 3}, and the activation of RO phase by carbonation was manifested. The mechanical properties and volume stability of carbonated steel slag were improved, proving that the positive effect of carbonation on steel slag when applied in cement and cementitious materials.

36 MATERIALS SCIENCE↗

Process control-enabled mitigation of microstructural and plastic heterogeneities in additively manufactured Grade 91 steel

Synergizing wire arc-directed energy deposition (WA-DED) additive manufacturing (AM) with particle-strengthened creep strength-enhanced ferritic (CSEF) steels enables fabrication and repair of critical power-plant components. Investigations focused on fusion-welded particle-strengthened CSEF steels, such as Grade 91 steel, have linked microstructurally heterogeneous regions—forming due to heat affected zones (HAZ)—with premature failure during elevated temperature service. Fusion-based AM, including WA-DED, likewise generates microstructurally and plastically heterogeneous regions due to spatiotemporally varying thermokinetics during deposition. However, works investigating such microstructural heterogeneities, their implications for mechanical behavior, and strategies to mitigate their formation remain scarce. This work identifies microstructurally and plastically heterogeneous regions within the WA-DED-processed Grade 91 steel. Spatial microhardness variations in the as-fabricated specimen correlate with the variation in the attributes of grain, martensitic microstructure, and precipitates across the fusion zone and HAZ. Digital image correlation-enabled tensile tests performed at 500 °C revealed pronounced deformation localization and a wave-like strain distribution, with wavelength close to the melt pool depth, indicating susceptibility of the as-fabricated components to premature creep failure. Such heterogeneity in microstructural and mechanical behavior was attributed to recurring solid-state phase transformations. Subsequently, an interlayer temperature control strategy was implemented, wherein maintaining interlayer temperature above the martensitic start temperature mitigated the heterogeneous microstructural and plastic response in the as-fabricated condition. Findings open pathways to achieving deformation-localization- and creep-resistant microstructures in WA-DED fabricated particle-strengthened CSEF steel components, reducing reliance on post-welding heat treatments—conventionally required to enhance creep resistance—and enabling on-demand, short lead-time fabrication of next-generation power-plant components.

Heat affected zones↗

Response of nanoclusters in a 9Cr ODS steel to 1 dpa, 525 ?C proton irradiation

Ferritic-martensitic (F/M) alloys are expected to play an important role as cladding or structural components in Generation IV and other advanced nuclear systems operating in the temperature range 350-700 C and to doses up to 200 displacements per atom (dpa). Oxide dispersion strengthened (ODS) F/M steels have been developed to operate at higher temperatures than traditional F/M steels. These steels contain nanometer-sized Y-Ti-O nanoclusters for additional strengthening. A proton irradiation to 1 dpa at 525 C has been performed on a 9Cr ODS steel to determine the nanocluster stability at low dose. The evolution of the nanocluster population and the composition at the nanocluster-matrix interface were studied using electron microscopy and atom probe tomography. The data from this study are contrasted to those from a previous study on heavy-ion irradiated 9Cr ODS steel.

36 MATERIALS SCIENCE↗

Carburization and decarburization behavior of Grade 91 ferritic-martensitic steel in liquid sodium environments

Here, this paper presents a study of carbon transfer and its effect on microstructure and tensile properties of Grade 91 (G91) ferritic-martensitic steel exposed to sodium at 550–650 °C. Sodium exposure tests were conducted in Argonne's forced convection sodium loops up to exposure times of ~40,000 h. Thermal aging study of G91 steel was conducted in parallel to isolate the thermal aging effect from the sodium effect. It was found that sodium exposures at 650 °C dissolved M 23 C 6 carbides, eliminated the martensite subgrain structure resulting in excessive grain growth and reduced the tensile strength by >50%, while sodium exposures at 550 and 600 °C had an insignificant effect on its microstructure and tensile properties. These effects were attributed to the carburization/decarburization process of G91 steel in sodium environments. Carbon concentrations in sodium were determined by a foil equilibration method. The estimated carbon concentration was in the range of 0.8–1.2 ppm in the SMT-1 loop and 0.3–0.7 ppm in the SMT-2 loop. Thermodynamic analysis of the carburization – decarburization process was conducted for G91 steels exposed in sodium environments. The carbon activity-concentration relationship for G91 was evaluated by considering four phases in G91, i.e. bcc ferrite, M 23 C 6 , NbC and VC carbides. It was found that the carburization-decarburization process in G91 steel was dictated by M 23 C 6 carbides at high carbon activities, while NbC and VC carbides dominated the process at low carbon activities. The calculated carburization-decarburization boundary showed that G91 would undergo decarburization at 650 °C and carburization at 550 °C in the sodium loop environments, which was consistent with our experimental observations. This experimental and theoretical analysis provided a basis for predicting the effect of carbon transfer on the integrity of reactor components in sodium environments and for the design of new alloys used in sodium-cooled fast reactors.

36 MATERIALS SCIENCE↗

The effect of phosphorus on precipitation in irradiated reactor pressure vessel (RPV) steels

Embrittlement of light water reactor pressure vessels (RPV) steels by fast neutron irradiation may limit extended nuclear plant life. Embrittlement, which is manifested as increases in various indexes of a ductile to brittle transition temperatures (ΔT), is primarily due to hardening by nanoscale precipitates containing Cu, Ni, Mn, and Si, which form under irradiation. In addition to these elements, P has also been found to play a role in embrittlement. While only slightly enriched in the precipitates, hardening and embrittlement increase with trace P concentrations in low-Cu steels. Here, we characterize the individual and synergistic irradiation precipitation and hardening mechanisms in a series of RPV steels containing no to low-Cu and with systematic variations in Ni and P. In this study, the steels were irradiated to a fluence of ~ 1.38 x 10 20 n/cm 2 at ~ 292 °C in the UCSB ATR-2 experiment. In Cu-free medium and high-Ni RPV steels, atom probe tomography shows that P and Ni promotes precipitation of P-Mn-Si-Ni and Mn-Si-Ni precipitates, respectively. The precipitate microstructure correlates with the observed irradiation hardening.

36 MATERIALS SCIENCE↗

Manufacturing Oxide Dispersion Strengthened (ODS) steel plate via cold spray and friction stir processing

Oxide dispersion strengthened (ODS) steels, traditionally fabricated by ball milling and conventional powder metallurgy techniques to achieve bulk form, followed by intricate rolling and thermal treatment steps to achieve plate or sheet form. Here, we present a novel processing route that combines cold spray (CS) with friction stir processing (FSP) to manufacture ODS steel plate directly from gas atomization reaction synthesis (GARS)-prepared powder, thus no rolling steps involved. Microstructural and mechanical characterizations were performed to assess the quality and properties of the resulting ODS steel plate. Our findings demonstrate that the slightly porous CS deposited layer was fully consolidated after FSP, yielding a fully dense ODS steel plate that exhibited a favorable tradeoff between strength and ductility upon extraction from the substrate. Furthermore, through microstructural analysis, we revealed the presence of an appreciable density (∼10 22 /m 3 ) of nano-sized oxide particles, with the majority being smaller than 5 nm via the combined CS + FSP fabrication route. This work serves as a first proof-of-concept demonstration of the manufacturing approach described herein, offering a possible alternative route for producing ODS steel plates.

36 MATERIALS SCIENCE↗

Understanding the effect of minor alloying elements on helium bubble formation in ferritic-martensitic steels

Ferritic-martensitic steels are promising structural materials for advanced nuclear reactors. To minimize long-term radioactivity, reduced-activation ferritic-martensitic steels have been developed by substituting high-activation elements like Ni and Mo with low-activation elements such as W. However, the impact of these alloying modifications on helium bubble formation, which plays a key role in material swelling, remains unclear. Here, in this study, we compared helium bubble formation in ferritic-martensitic steel T91 and reduced-activation ferritic-martensitic steel F82H. Both materials were irradiated with sequential 100 keV, 150 keV, and 200 keV helium ions to a dose of 0.5 dpa and a helium concentration of 9,000 appm at 500°C. The helium bubbles in F82H exhibited a larger average size and a lower density than those in T91, suggesting differences in minor alloying elements may influence the bubble growth. Here, to investigate the effects of these alloying elements, we characterized radiation-induced segregation near bubbles and grain boundaries. Prominent Ni-Mn-Si enriched clusters were found near bubbles in T91, while only Mn-Si enriched clusters were found near bubbles in F82H. In addition, the obvious Cr enrichment near grain boundaries was absent around bubbles in both steels. The different segregation trends among elements revealed the variations in element diffusion mechanisms and the different sink biases between bubbles and grain boundaries. Cr enrichment near grain boundaries is mostly driven by interstitial-mediated diffusion. However, since bubble growth relies on net vacancy flux, vacancy-mediated diffusion plays a dominant role in controlling element segregation near bubbles. Therefore, Cr enrichment was not found near bubbles. Because of preferential vacancy-drag diffusion for Ni, Si and Mn, these elements were enriched near bubbles. Due to the strong binding energies of vacancies with these solute atoms, the vacancy diffusivity can be reduced near these solutes. Therefore, the more prominent Ni-Si-Mn clustered near helium bubbles in T91 lead to stronger suppression of helium bubble growth compared to F82H.

36 MATERIALS SCIENCE↗

Chemical and mineralogical characterizations of LD converter steel slags: A multi-analytical techniques approach

The use of LD converter steel slags (coming from Linz-Donawitz steelmaking process) as aggregates in road construction can in certain cases lead to dimensional damage due to a macroscopic swelling that is the consequence of chemical reactions. The aim of this study was to couple several analytical techniques in order to carefully undertake chemical and mineralogical characterizations of LD steel slags and identify the phases that are expected to be responsible for their instability. Optical microscopy, scanning electron microscopy and electron probe microanalyses revealed that LD steel slags mainly contain calcium silicates, dicalcium ferrites, iron oxides and lime. However, as a calcium silicate phase is heterogeneous, Raman microspectrometry and transmitted electron microscopy had to be used to characterize it more precisely. Results showed that lime is present under two forms in slag grains: some nodules observed in the matrix whose size ranges from 20 to 100 {mu}m and some micro-inclusions, enclosed in the heterogeneous calcium silicate phase whose size ranges from 1 to 3 {mu}m. It was also established that without the presence of magnesia, lime is expected to be the only phase responsible for LD steel slags instability. Nevertheless, the distribution of lime between nodules and micro-inclusions may play a major role and could explain that similar amounts of lime can induce different instabilities. Thus, it appears that lime content of LD steel slags is not the only parameter to explain their instability.

36 MATERIALS SCIENCE↗