Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Matched”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Improving magnitude and phase comparison metrics for frequency response functions using cross-correlation and log-frequency shifting

This paper provides a new method for matching dominant features of Frequency Response Functions (FRFs). In particular, this paper proposes a slicing and shifting method where the key features (in this case, resonant amplitudes) of a baseline FRF are compared with a similar FRF using cross-correlation and a Log-Frequency Shift (LFS). Here, the goal is to provide an alternative to classic point-to-point methods for FRF comparison and instead to match the dominant features of two FRFs in a way similar to visual inspection. This enables existing FRF comparison metrics to then be applied with greater fidelity. Additionally, this paper introduces the Phase Similarity Metric (PSM) for comparing phases of two FRFs and illustrates the improvement of using LFS for phase comparisons as well. This paper uses a cantilever beam experiment in multiple configurations to provide a benchmark case for FRF comparison improvements.

42 ENGINEERING↗

Over 11% Efficient Eco-Friendly Kesterite Solar Cell: Effects of S-Enriched Surface of Cu2ZnSn(S,Se)4 Absorber and Band Gap Controlled (Zn,Sn)O Buffer

For high efficiency kesterite Cu2ZnSn(S,Se)4 (CZTSSe) solar cell, CdS thin film was usually used as a buffer layer. However, due to the toxicity of Cd and pollution problems involved from the solution-based chemical bath deposition, eco-friendly high efficiency CZTSSe solar cell with Cd-free buffer is necessary. As an Cd-free buffer layer, we investigated (Zn,Sn)O (ZTO) film deposited by sputtering method. In order to achieve high power conversion efficiency, we controlled energy band gaps of CZTSSe absorber as well as ZTO buffer, which was required to optimize conduction band offset (CBO) between the absorber and the buffer and to increase open circuit voltage (Voc) and fill factor (FF). The CBO was optimized by controlling the band gap of ZTO. By varying the Sn/(Zn + Sn) ratio and its deposition temperature, band gap of ZTO was successfully adjusted. Experimental and computational calculation results showed that solar cell performance was strongly affected by the CBO between absorber and buffer. Besides CBO matching, larger band gap of ZTO improved short circuit current density (Jsc) with enhanced external quantum efficiency value in blue photon spectrum range. As an additional way to improve power conversion efficiency of solar cell, band graded CZTSSe absorber was developed by using spray-based two-step process. The sprayed CZTSSe film was engineered to have S-enriched surface, which makes surface band gap widened and surface passivated, and resultantly increases Voc, Jsc and fill factor (FF). By controlling band gaps of both CZTSSe absorber and ZTO buffer, we obtained 11.22% environment-friendly CZTSSe solar cell without MgF2 anti-reflection coating.

(Zn↗

Automated co-adding and energy calibration of large array microcalorimeter data with zero sample knowledge

State-of-the-art microcalorimeter spectrometers now contain large detector arrays with hundreds of individual pixels. Each individual pixel outputs a unique and non-linear response with respect to deposited energy. This work describes a pattern-recognition algorithm to combine these responses into a single energy-calibrated histogram, referred to as co-adding pixels. Photo-peaks from different pixels are matched together based upon how well the match aligns the centroids and heights of neighboring peaks. This usually results in around 100 co-adding calibration points from 30 to 300 keV for a several day acquisition of plutonium items with masses between 0.5 and 10 grams. An additional algorithm energy-calibrates this co-added spectrum using the fluoresced K x-ray emissions from a tantalum absorber and inherent x-ray escape peaks from the tin absorbers. Both algorithms operate without knowledge of the source and are fully automated. This work presents results from the acquisitions of high and low burnup plutonium, 10% enriched uranium, a 153 Gd calibration source, and a 57 Co+ 166m Ho calibration source. In all measurements, resolution defined as the full-width at half-maximum (FWHM) of photo-peaks is preserved between the individual pixel and co-added spectra at around 65 eV for incident photon energies between 60 and 208 keV. The energy calibration algorithm is approximate and yields a calibration curve off by an average of around 200 eV for incident photon energies between 60 and 208 keV.

47 OTHER INSTRUMENTATION↗

Experimental validation of simplified radionuclide transport bubble scrubbing code in sodium coolant pool

Solid radionuclides released following fuel pin failure may become entrained in gaseous fission products and be rapidly transported through the coolant pool to the cover gas region. Sensitivity studies on radionuclide transport have identified this potential pathway as one of both high concern and high uncertainty. The simplified radionuclide transport scrubbing code utilizes classical aerosol scrubbing mechanisms to model this phenomenon and predict aerosol masses reaching the cover gas region. This paper serves to validate this code in a sodium environment while conducting a parametric study to analyze the effects of aerosol size, bubble size, pool temperature, pool depth, aerosol density, and aerosol concentration. Through a series of experimental tests, it was determined that aerosol sizes ranging from 0.001 to 1.0 µm are of primary concern as aerosols in this range have a ratio of aerosol mass entering the sodium pool from the fuel pin to aerosol mass exiting the sodium pool to the cover gas region of less than 10. Further, the experimental results were found to match the trends found in the scrubbing model closely, but significantly more scrubbing was seen experimentally. Decreasing bubble size and increasing pool depth and aerosol density were all found to increase scrubbing both experimentally and theoretically. Pool temperature was found to have a negligible effect on scrubbing amounts; however, this was largely due to a subsequent increase in bubble size corresponding to increasing temperatures which offset the increase in scrubbing due to increased temperature. Varying aerosol concentration was found to have no effect on scrubbing ratios. A final series of tests was conducted for a more prototypic fuel pin failure with a heterogenous bubble swarm. From these tests, it was found that the experimental scrubbing quantities were larger than for the single bubble case. Overall, it was found that the simplified bubble transport scrubbing code accurately models the trends of the bubble scrubbing but provides a conservative estimate of scrubbing quantities. Model limitations fail to model the complex phenomena present for fission product scrubbing via bubble transport, but match trends seen experimentally.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Radioarsenic: A promising theragnostic candidate for nuclear medicine

Molecular imaging is a non-invasive process that enable the visualization, characterization, and quantitation of biological processes at the molecular and cellular level. With the emergence of theragnostic agents to diagnose and treat disease for personalized medicine there is a growing need for matched pairs of isotopes. Matched pairs offer the unique opportunity to obtain patient specific information from SPECT or PET diagnostic studies to quantitate in vivo function or receptor density to inform and tailor therapeutic treatment. There are several isotopes of arsenic that have emissions suitable for either or both diagnostic imaging and radiotherapy. Their half-lives are long enough to pair them with peptides and antibodies which take longer to reach maximum uptake to facilitate improved patient pharmacokinetics and dosimetry then can be obtained with shorter lived radionuclides. Arsenic-72 even offers availability from a generator that can be shipped to remote sites and thus enhances availability. Arsenic has a long history as a diagnostic agent, but until recently has suffered from limited availability, lack of suitable chelators, and concerns about toxicity have inhibited its use in nuclear medicine. However, new production methods and novel chelators are coming online and the use of radioarsenic in the pico and nanomolar scale is well below the limits associated with toxicity. This manuscript will review the production routes, separation chemistry, radiolabeling techniques and in vitro/in vivo studies of three medically relevant isotopes of arsenic (arsenic-74, arsenic-72, and arsenic-77).

07 ISOTOPE AND RADIATION SOURCES↗

Development and assessment of models for turbulent Rayleigh-Taylor mixing using the macroscopic forcing method

Reynolds-Averaged Navier Stokes (RANS) simulations are a popular method for designing ICF experiments, and accurate mixing models are crucial for these simulations to give good predictions. To this end, the present work seeks to demonstrate the Macroscopic Forcing Method (MFM) as a tool for both improving existing RANS models as well as assessing RANS model forms. First, MFM analysis from Lavacot et al. (Phys. Rev. Fluids, 2025) is used to develop the k–L–F model, an extension of the k–L model of Dimonte and Tipton (Phys. Fluids, 2006) that incorporates nonlocality through addition of a turbulent species flux transport equation. MFM is then applied to the k–L–F model along with the k–L and BHR–4 models to assess their forms and compare the model-implied eddy diffusivity moments to those measured from high-fidelity simulations. Furthermore, the analysis reveals that models incorporating nonlocality (k–L–F and BHR–4) match the high-fidelity simulation data better than purely local models (k–L), both in terms of mean fields and eddy diffusivity moments. However, all of the considered RANS models struggle to match temporal moments at high Atwood numbers, highlighting the importance of temporal nonlocality in these regimes and the need for additional improvement even among models incorporating nonlocality.

general physics↗

RG-CAT: Detection pipeline and catalogue of radio galaxies in the EMU pilot survey

Abstract We present source detection and catalogue construction pipelines to build the first catalogue of radio galaxies from the 270$\rm deg^2$pilot survey of the Evolutionary Map of the Universe (EMU-PS) conducted with the Australian Square Kilometre Array Pathfinder (ASKAP) telescope. The detection pipeline uses Gal-DINO computer vision networks (Gupta et al. 2024, PASA, 41, e001) to predict the categories of radio morphology and bounding boxes for radio sources, as well as their potential infrared host positions. The Gal-DINO network is trained and evaluated on approximately 5 000 visually inspected radio galaxies and their infrared hosts, encompassing both compact and extended radio morphologies. We find that the Intersection over Union (IoU) for the predicted and ground-truth bounding boxes is larger than 0.5 for 99% of the radio sources, and 98% of predicted host positions are within$3^{\prime \prime}$of the ground-truth infrared host in the evaluation set. The catalogue construction pipeline uses the predictions of the trained network on the radio and infrared image cutouts based on the catalogue of radio components identified using theSelavysource finder algorithm. Confidence scores of the predictions are then used to prioritiseSelavycomponents with higher scores and incorporate them first into the catalogue. This results in identifications for a total of 211 625 radio sources, with 201 211 classified as compact and unresolved. The remaining 10 414 are categorised as extended radio morphologies, including 582 FR-I, 5 602 FR-II, 1 494 FR-x (uncertain whether FR-I or FR-II), 2 375 R (single-peak resolved) radio galaxies, and 361 with peculiar and other rare morphologies. Each source in the catalogue includes a confidence score. We cross-match the radio sources in the catalogue with the infrared and optical catalogues, finding infrared cross-matches for 73% and photometric redshifts for 36% of the radio galaxies. The EMU-PS catalogue and the detection pipelines presented here will be used towards constructing catalogues for the main EMU survey covering the full southern sky.

Astronomy & Astrophysics↗

Evaluating Retention Index Score Assumptions to Refine GC–MS Metabolite Identification

As metabolomics grows into a high-throughput and high demand research field, current metrics for the identification of small molecules in gas chromatography–mass spectrometry (GC–MS) still require manual verification. Though steps have been taken to improve scoring metrics by combining spectral similarity (SS) and retention index (RI), the problem persists. A large body of literature has analyzed and refined SS scores, but few studies have explicitly studied improvements to RI scores. Here, in this study, we examined whether uninvestigated assumptions of the RI score are valid and propose ways to improve them. Query RIs were matched to library RI with a generous window of ±35 to avoid unintentional removal of valid compound identifications. Each match was manually verified as a true positive (TP), true negative, or unknown. Metabolites with at least 30 TP identifications were included in downstream analyses, resulting in a total of 87 metabolites from samples of varying complexity and type (e.g., amino acid mixtures, human urine, fungal species, and so on.). Our results showed that the RI score assumptions of normality, consistent variance across metabolites, and a mean error centered at 0 are often violated. We demonstrated through a cross-validation analysis that modifying these underlying assumptions according to empirical metabolite-specific distributions improved the TP and negative rankings. Further, we statistically determined the minimum number of samples required to estimate distributional parameters for scoring metrics. Overall, this work proposes a robust statistical pipeline to reduce the time bottleneck of metabolite identification by improving RI scores and thus minimize the effort to complete manual verification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Predicting and Synthesizing Interface Stabilized 2D Layers

The compound (Pb 2 MnSe 3 ) 0.6 VSe 2 was predicted to be kinetically stable based on density functional theory (DFT) calculations on an island of Pb 2 MnSe 3 between layers of VSe 2 . This approach provides a high degree of freedom by not forcing interlayer lattice match, making it ideal to investigate the likelihood of formation of new incommensurate layer misfit structures. The free space around the island is critical, as it allows atoms to diffuse and hence exploring the local energy landscape around the initial configuration. (Pb 2 MnSe 3 ) 0.6 VSe 2 was synthesized via a near diffusionless reaction from precursors where a repeating sequence of elemental layers matches the local composition and layer sequence of the predicted compound. The VSe 2 layer consists of a Se–V–Se trilayer with octahedral coordination of the V atoms. The Pb 2 MnSe 3 layer consists of three rock-salt-like planes, with a MnSe layer between the planes of PbSe. The center MnSe plane stabilizes the puckering of the outer PbSe layers. Electrical properties indicate that (Pb 2 Mn 1 Se 3 ) 0.6 VSe 2 undergoes a charge density wave transition at ~100 K and orders ferromagnetically at 35 K. Overall, the combination of theory and experiment enables a faster convergence to new heterostructures than either approach in isolation.

36 MATERIALS SCIENCE↗

Structure and Magnetic Properties of Homoleptic Trivalent Tris(alkyl)lanthanides

Six new solvent-free, homoleptic paramagnetic tris(alkyl)lanthanides Ln{C(SiHMe 2 ) 3 } 3 (1Ln) and Ln{C(SiHMe 2 ) 2 Ph} 3 (2Ln) (Ln = Gd, Dy, and Er) were synthesized to investigate the magnetic properties of 4f organometallic compounds stabilized by secondary Ln←H–Si and benzylic interactions. The unit cell of 1Gd contains one independent molecule (Z = 2), while 1Dy and 1Er crystallize with four independent isostructural molecules per unit cell (Z = 16). In all molecules, as in other 1Ln compounds, the three tris(dimethylsilyl)methyl ligands form a trigonal planar LnC 3 core, and six secondary interactions involving Ln←H–Si bonding in Ln{C(SiHMe 2 ) 3 } 3 form above and below the equatorial plane. Two and five crystallographically independent molecules of each 2Ln (2Gd, Z = 8; 2Dy, Z = 20) form with three π-coordinated phenyl groups in addition to either one or two secondary Ln←H–Si interactions per molecule. The packing of these midseries organolanthanide compounds contrasts the single crystallographically unique molecules in previously reported La{C(SiHMe 2 ) 3 } 3 (1La, Z = 2, Z' = 1) and La{C(SiHMe 2 ) 2 Ph} 3 (2La, Z = 2, Z' = 1/3). 2La doped with 2Dy can adopt the crystallographic structure of 2La, which promotes magnetic properties, namely a higher χ m T value at low temperatures as well as stronger magnetic anisotropy. The ac susceptibility data for 10% 2Dy doped into 2La suggests slow relaxation at low temperatures with a relaxation barrier of ~45 K. The computed saturated magnetization of 1Er (M ≈ 4.5 μ B ) and 1Dy (M ≈ 6 μ B ) matches the experimental values, while the computed value for 2Dy better matches the value measured for 2Dy diluted in 2La (M ≈ 5 μ B ). Gas-phase calculations predict that the ground-state and first excited-state multiplet separations are larger for 1Er than 2Er, while the ordering for dysprosium is 1Dy > 2Dy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pairing a Global Optimization Algorithm with EXAFS to Characterize Lanthanide Structure in Solution

Ensemble-average sampling of structures from ab initio molecular dynamics (AIMD) simulations can be used to predict theoretical extended X-ray absorption fine structure (EXAFS) signals that closely match experimental spectra. However, AIMD simulations are time-consuming and resource-intensive, particularly for solvated lanthanide ions, which often form multiple nonrigid geometries with high coordination numbers. Here, to accelerate the characterization of lanthanide structures in solution, we employed the Northwest Potential Energy Surface Search Engine (NWPEsSe), an adaptive-learning global optimization algorithm, to efficiently screen first-shell structures. As case studies, we examine two systems: Eu(NO 3 ) 3 dissolved in acetonitrile with a terpyridine ligand (terpyNO 2 ), and Nd(NO 3 ) 3 dissolved in acetonitrile. The theoretical spectra for structures identified by NWPEsSe were compared to both experimental and AIMD-derived EXAFS spectra. The NWPEsSe algorithm successfully identified the proper solvation structure for both Eu(NO 3 ) 3 (terpyNO 2 ) and Nd(NO 3 )(acetonitrile) 3 , with the calculated EXAFS signals closely matching the experimental spectra for the Eu-ligand complex and showing good similarity for the Nd salt; the better agreement with the ligand-containing structure is attributed to a less dynamic coordination environment due to the rigid ligand. The key advantage of the global optimization algorithm lies in its ability to sample the coordination environment across the potential energy surface and reduce the time required to identify structures from generally a month to within a week. Additionally, this approach is versatile and can be adapted to characterize main-group metal complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystalline Organic Compounds as Effective Nuclei in Contact Efflorescence of Ammonium Sulfate

Contact nucleation is believed to play a role in liquid-to-solid phase transitions in the atmosphere including ice nucleation and salt efflorescence. Here, for this work, contact efflorescence of optically levitated ammonium sulfate droplets by collisions with organic particles is probed using a long working-distance optical trap. Two highly viscous water-soluble organic compounds (d-(+)-raffinose and citric acid), and two insoluble highly surface-active organic compounds (stearic acid and cis-pinonic acid) were probed for their ability to induce efflorescence upon contact. While three of the organics showed minimal effectiveness as contact nuclei, cis-pinonic acid showed a remarkable ability to initiate contact efflorescence of ammonium sulfate, occurring near ammonium sulfate’s deliquescence relative humidity. Further analysis of cis-pinonic acid using bright-field microscopy in an electrodynamic balance provided evidence that the cis-pinonic acid particles are crystalline under the laboratory conditions. We suggest that the close lattice match between crystalline ammonium sulfate and crystalline cis-pinonic acid may account for the observed effectiveness in initiating contact efflorescence of ammonium sulfate. In contrast, tests of contact nucleation between cis-pinonic acid and sodium chloride, a pair with a poor lattice match, did not result in efflorescence. These findings suggest that crystalline organic compounds in the atmosphere could act as effective nuclei for contact efflorescence of atmospherically relevant salts, provided they share a compatible lattice structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling Pb(II) Adsorption on Mineral Surfaces: Bridging Density Functional Theory and Experiment with Thermodynamic Insights

Despite decades of work on aqueous lead (Pb) adsorption on a-Fe2O3 (hematite) and a-Al2O3 (alumina), gaps between measurements and modeling obscure molecular-level understanding. Achieving well-matched geometries between theory and experimental for mineral-water interfaces is a hurdle, as surface functional group type and distribution must be accounted for in determining mechanisms. Additionally, computational methods that can describe the substrate are often not appropriate to capture aqueous effects. Progress requires focusing on well-studied and relevant systems, such as key facets (001),(012), and (110) of hematite and alumina, and ubiquitous contaminants such as aqueous Pb. In the past, bulk-parametrized bond-valence principles were used to rationalize Pb(II) adsorption trends. These approaches can break down at surfaces, where flexible bonding environments and adsorption-induced surface relaxations play a critical role. Here, we adapt and apply a density functional theory (DFT) and thermodynamics framework, integrating DFT-calculated energies with experimental data and electrochemical principles, to predict Pb(II) adsorption. Our model results capture trends across the full set of surfaces and predict that inner-sphere Pb(II) sorption on (001) alumina varies from unfavorable to weakly favorable across a range of pH conditions. This aligns with experiment insights that Pb(II) interacts at that surface through outer-sphere interactions. Extending to Fe(II) adsorption, we demonstrate a coverage-dependent site preference, potentially explaining disorder in overlayers grown by the oxidative adsorption of Fe(II) on hematite (001).

lead contamination↗

PySIDT: Subgraph Isomorphic Decision Trees for Molecular Property Prediction

Accurate molecular property prediction is important across all fields of chemistry. Deep neural networks (DNNs) have become increasingly popular due to their ability to train automatically, avoiding the incredibly tedious process of constructing and extending traditional property estimation schemes. However, DNNs require large amounts of training data, are challenging to interpret, require large amounts of memory to load even during inference, and have severe difficulties incorporating qualitative chemical knowledge, which are often desired for molecular property prediction tasks. Here, in this study, we present PySIDT (https://github.com/zadorlab/PySIDT), a software for training and running inference on Subgraph Isomorphic Decision Trees (SIDTs). SIDTs are graph-based decision trees made of nodes associated with molecular substructures. Inference is done by descending target molecular structures down the decision tree to nodes with matching subgraph isomorphic substructures and making predictions based on the final (most specific) nodes matched. SIDTs scale down well to dataset sizes much smaller than is feasible for DNNs. As trees of molecular substructures, SIDTs are inherently readable and easy to visualize, making them easy to analyze. They are also straightforward to extend and retrain, facilitate uncertainty estimation, and enable easy integration of expert knowledge. We demonstrate the SIDT approach discussing its application to a diverse range of molecular prediction tasks: rate coefficient estimation, diffusion coefficient estimation, thermochemistry estimation, transition state bond stretch prediction, p K a prediction, stability of molecular structures, stability of surface structures, and prediction of surface lateral interaction energetics. Additionally, we demonstrate the power of the SIDT algorithms in two direct learning curve vanilla comparisons with the popular DNN-based software Chemprop and the popular gradient boosted trees-based software XGBoost on enthalpy of formation and rate coefficient prediction tasks. In particular, in the enthalpy of formation case, vanilla PySIDT is able to outperform vanilla Chemprop and XGBoost across the full range of training/validation set sizes out to 11,560 data points.

Johnson, Matthew Sean [Sandia National Laboratorie↗

Characterizing Surface Ice-Philicity Using Molecular Simulations and Enhanced Sampling

The formation of ice, which plays an important role in diverse contexts ranging from cryopreservation to atmospheric science, is often mediated by solid surfaces. Although surfaces that interact favorably with ice (relative to liquid water) can facilitate ice formation by lowering nucleation barriers, the molecular characteristics that confer ice-philicity to a surface are complex and incompletely understood. To address this challenge, here we introduce a robust and computationally efficient method for characterizing surface ice-philicity that combines molecular simulations and enhanced sampling techniques to quantify the free energetic cost of increasing surface–ice contact at the expense of surface–water contact. Using this method to characterize the ice-philicity of a family of model surfaces that are lattice matched with ice but vary in their polarity, we find that the nonpolar surfaces are moderately ice-phobic, whereas the polar surfaces are highly ice-philic. In contrast, for surfaces that display no complementarity to the ice lattice, we find that ice-philicity is independent of surface polarity and that both nonpolar and polar surfaces are moderately ice-phobic. Furthermore, our work thus provides a prescription for quantitatively characterizing surface ice-philicity and sheds light on how ice-philicity is influenced by lattice matching and polarity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coupling of Charge Regulation and Geometry in Soft Ionizable Molecular Assemblies

The size, shape, and charge of structures, such as proteins and amphiphile assemblies, respond in an interconnected manner to solution ionic conditions. Here, we analyze assemblies of an amphiphile (C 16 K 2 ), with two ionizable amino acids [lysine (K)] coupled to a 16-carbon alkyl tail, via small-angle X-ray scattering (SAXS), nonlinear Poisson–Boltzmann theory (nl-PB), and hybrid Monte Carlo-molecular dynamics (MC-MD) simulations. SAXS revealed structural transitions from spherical micelles to cylindrical micelles to bilayers with increasing pH. By combining SAXS-determined structural information and nl-PB, we derived the molecular degree of ionization as a function of pH. The back-calculated titration curves matched the experimental data over an extended pH range, without adjustable parameters. Similarly, the SAXS data on the evolution of spherical micelle structure with ionic strength were combined with nl-PB and MC-MD to derive the bare and effective charges. MC-MD, which considered finite ion sizes, showed that bare and effective charges saturate quickly with increasing salt concentration. Furthermore, the calculated effective charges closely matched results from Zeta-potential measurements. The presented approach has advantages over customary methods for charge regulation, such as the Henderson–Hasselbalch (HH) or Hill models, where molecular ionization/deionization in assemblies is described by effective pKs that are distinct from the pK for isolated molecules. However, these models lack a physical explanation for these pK shifts. By contrast, our approach of combining structural details with an electrostatic model and simulations provides a more intuitive understanding of structure-charge coupling and a framework for understanding charge regulation in many synthetic and biological systems.

ionization↗

On the Nature of Field-Enhanced Water Dissociation in Bipolar Membranes

Bipolar membranes (BPMs) possess the potential to optimize pH environments for electrochemical synthesis applications when employed in reverse bias. Unfortunately, the performance of BPMs in reverse bias has long been limited by the rate of water dissociation (WD) occurring at the interface of the BPM. Herein, we develop a continuum model of the BPM that agrees with experiment to understand and enhance WD catalyst performance by considering multiple kinetic pathways for WD in the BPM junction catalyst layer. Here, the model reveals that WD catalysts with a more highly alkaline or acidic pH at the point of zero charge (pH PZC ) exhibit accelerated WD kinetics because the more acidic or alkaline pH PZC catalysts possess greater surface charge, enhancing the local electric field and rate of WD. The model is then employed to explore the sensitivity of the BPM performance to various BPM physical parameters. Finally, the model is used to simulate the operation of bimetallic WD catalysts, demonstrating that an optimal bimetallic catalyst has an acidic pH PZC catalyst matched with the cation-exchange layer and an alkaline pH PZC catalyst matched with the anion-exchange layer. The study provides insight into the operation of BPM WD catalysts and gives direction toward the development of next-generation WD catalysts for optimal BPM performance under water-splitting and related conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure of Diisobutylene Maleic Acid Copolymer (DIBMA) and Its Lipid Particle as a “Stealth” Membrane-Mimetic for Membrane Protein Research

The study of membrane proteins remains challenging, especially in a native membrane environment. Recently, major progress has been made using maleic acid copolymers, such as styrene maleic acid, to purify membrane proteins and study them directly with native lipids associated with the membrane. Additional maleic acid copolymers, such as diisobutylene maleic acid (DIBMA) membrane-mimetic systems, are being developed and found to have improved spectroscopic properties and pH stability. We studied DIBMA and its lipid particles in solution to better understand its assembly, without and with the lipids, to provide an insight regarding how to use it in solution for better membrane extraction. Using small-angle neutron and X-ray scattering (SANS/SAXS), we show that DIBMA organizes into structures of different size scales at various concentrations and ionic strengths. The polymer performed reasonably well under most solvent conditions except in very low concentrations and high-salt conditions that could result in limited interaction with lipids. To explore DIBMA lipid particles as a suitable membrane-mimetic system for neutron scattering studies of membrane proteins, we measured and determined the contrast-matching point of DIBMA to be ~12% (v/v) D 2 O — similar to that of most protiated lipid molecules but distinct from that of regular protiated proteins — providing a natural contrast for separating their neutron scattering signals. Using SANS contrast variation, we demonstrated that the scattering from the whole lipid particle can be annihilated. Further, we determined that a well-defined lipid nanodisc structure with DIBMA was contrast-matched. These results demonstrate that the DIBMA lipid particle is an outstanding “stealth” membrane-mimetic for membrane proteins. The results provide a structural framework for understanding the organization and assembly process of the polymer itself and the lipid molecules. Such an understanding is imperative for structural techniques such as cryo-electron microscopy, nuclear magnetic resonance, small-angle scattering, and other biophysical techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗