Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LIFETIME”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Measurement of the $B_c^{\pm}$ meson lifetime using $B_c^{\pm} \to J/\psi~\pi^{\pm}$ decays

This thesis describes a measurement of the lifetime of the B ± c meson in an exclusive decay channel B ± c → J/ ψ π ± , where the J/ψ decays as J/ψ → μ + μ - . The measurement uses a data sample with an integrated luminosity of 6.7 fb -1 collected at CDF. This is the first measurement of the B ± c meson lifetime in a hadronic channel and the measured lifetime, τ = 0.449 +0.054 -0.048 (stat:) ± 0.019(syst:) ps, is in good agreement with previous results obtained from semileptonic decay channel and confirms previous measurements and theoretical predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the B 0 s lifetime using the semileptonic decay channel B 0 s → D - s μ + vX

We report a measurement of the B 0 s lifetime in the semileptonic decay channel BB 0 s → D - s μ + vX (and its charge conjugate), using approximately 0.4 fb -1 of data collected with the DØ detector during 2002–2004. Using 5176 reconstructed D - s μ + signal events, we have measured the B 0 s lifetime to be τ (B 0 s ) = 1.398 ± 0.044 (stat) +0.028 -0.025 (syst) ps. This is the most precise measurement of the B 0 s lifetime to date.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Precision Measurements of Lifetime and $\bf CP$ Violation Phase in the $\bf B^{0}_{s}$ Meson with the DØ Detector

The Standard Model of Partice Physics (SM) is probably the most successful theory, regarding to his predictions. The SM prediction for $CP$ violation is not enough to explain the overwhelming asymmetry among the matter and anti-matter abundance. Measuring some process where $CP$ violation is different to the one predicted by the SM would be a clear signal for Physics Beyond the Standard Model. The SM prediction for the $CP$ violation phase, $\phi_{s}$, in the $B^{0}_{s}$ meson is practically equal to zero for the current experiments. This means that measuring a deviation from zero in $\phi_{s}$ could be an indication for Physics Beyond the SM. On the other hand, the approximation based on the ``heavy quark symmetry'' let approximated calculations of the fundamental quantities of those hadrons containing a heavy quark, $c,b,t$. These calculations are expressed as expansions on inverse powers of the heavy quark mass in such hadron. This formalism is called `` Heavy Quark Effective Theory'' (HQET), and has been successful predicting some properties of the heavy hadrons. The HQET prediction for the lifetime ratio the $B^{0}_{d}$ and $B^{0}_{s}$ is practically equal to one. So, measuring with good precision the $B^{0}_{s}$ lifetime is also a way to test an approximation based on the SM. In this thesis it is detailed presented the method to measure the $\phi_{s}$ and the lifetime ratio of the $B^{0}_{d}$ and $B^{0}_{s}$, among other quantities, with the DØ located in the Fermi National Accelerator Laboratory, in the United States.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of B 0 and B + Lifetimes using Semileptonic Decays at CDF

Lifetime measurements for B 0 and B + are presented using semileptonic decays of B mesons from 360 pb -1 of data collected by CDF's lepton plus displaced track trigger. The decays B → ℓνDX, where D is either D + , D 0 , or D * + , are partially reconstructed from a muon or electron, a displaced track, and a fully reconstructed charm meson. The B 0 and B + lifetimes are obtained from an unbinned maximum-likelihood fit to the proper decay length distributions. The measured lifetimes are τ B 0 = 1.527 ± 0.012(stat.) ± 0.023( syst.)ps and τ B + = 1.629 ± 0.013(stat.) ± 0.025( syst.)ps.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

2020 Report - SRNL Aging and Lifetimes program tritium aging studies on structural alloys

This report documents work performed in calendar year 2020 at SRNL in support of the Aging and Lifetimes program. This work is part of an on-going collaboration between SRNL and SNL to understand tritium embrittlement of structural metals in Gas Transfer System reservoirs which informs lifetime assessments and lifetime predictions. In this effort, test coupons are precharged with tritium and allowed to age in a freezer to minimize tritium egress and allow for born-in helium levels to systematically increase. Coupons are then removed periodically and tested to develop an understanding of how mechanical properties degrade as helium levels increase. This report summarizes test results from coupons which are in various stages of aging as they were tritium precharged in previous years.

36 MATERIALS SCIENCE↗

Development of an Open-source Alloy Selection and Lifetime Assessment Tool for Structural Components in CSP

Lack of sufficient data on high temperature mechanical and corrosion behavior of structural materials is a huge barrier in the technological maturity of current and future Concentrating Solar Power (CSP) technologies. Rapid development and selection of materials cannot be achieved by expensive and time-consuming acquisition of experimental data. The goal of the proposed work is development of an open-source alloy selection and lifetime prediction tool that will integrate validated physics-based models to describe influence of temperature, alloy composition, environment and component geometry (thickness) on mechanical and corrosion behavior of Ni and Fe-based alloys employed in molten salts/sCO 2 heat exchangers. This one-year project leveraged the extensive dataset on the creep\corrosion behavior of candidate materials generated at ORNL through past projects and input from current collaborations with industrial partners. Based on previous experience and the feedback provided by industry (Brayton Energy and Echogen), three candidate materials of interest, Ni-based alloys 740H, 282 and 625 and application-specific operating conditions (max. temperature of 730 °C and stress of 150 MPa) were identified for the heat exchanger. An extensive corrosion and creep dataset was assimilated for the relevant operating conditions and was supported by detailed characterization of about 100 metallographic cross-sections. The corrosion dataset consisted of scanning electron microscopy images (secondary electron and backscatter electron), measured concentration profiles of alloying elements using energy dispersive X-ray spectroscopy (EDS), widths of denuded zones (dissolution of strengthening phases) and depths of attack in molten KCl-MgCl 2 mixtures using image analyses. The creep dataset comprised of creep rupture data and creep strain curves (for 740H and 282). Coupled thermodynamic-kinetic microstructure-based models were employed to predict the stress-corrosion induced compositional and phase evolutions in the alloy during operation under the identified operating conditions. Reduced order models were developed from advanced physics-based models and were integrated in a user-friendly alloy selection tool. The corrosion model was able to predict the time to a critical Cr concentration at the oxide/alloy interface (chemical lifetime) within ±10% (1 standard deviation) of typical statistical variation in corrosion tests and EDS measurement errors (±0.5 wt%). The initial scope of the project was limited to predict creep rupture times (Larson-Miller parameter). Based on the input provided by industry, the mechanical lifetime of the heat exchanger is governed by accumulated creep strains (2%) rather than creep rupture. To be able to predict the times to specific creep strains, a more extensive creep model development was undertaken largely beyond the initial scope of the project. The continuum damage mechanics creep model was able to predict times to 2% creep strain, t 2% with an accuracy of ±500h. Ultimately, a screening protocol for SiC was generated to demonstrate the pathway for integration of one of the currently immature materials from a commercial adoption standpoint in the current material evaluation tool. The modeling tool developed here is accessible to the science community and stakeholders and lays the foundation for methods that will enable a rapid evaluation of optimum materials for CSP applications and reliable prediction of material degradation thereby considerably reducing operational costs, improving reliability and increasing overhaul intervals. However, the complete potential of such a tool to include a wider range of materials and test conditions can only be realized with a more concentrated combined experimental-characterization-computation effort.

14 SOLAR ENERGY↗

Investigating Cryogenic Pump Lifetime and Exploring Alternative Designs

Cryogenic pumps are necessary for the operation of several neutrino experiments at Fermilab where some of the primary components of the detectors are liquid argon and liquid nitrogen. The pumps currently in use are centrifugal pumps with a small vortex impeller, manufactured by Barber Nichols. This pump has an average lifetime of 8000 hours. Such a short lifetime means that each pump requires maintenance multiple times a year, which is not optimal. The goal of this project was to determine what aspects of the current pump design could be modified to improve the lifetime of the pump such that it would only require maintenance once a year. In this poster I present on the different areas of design improvement that were identified.

Baakkonen, Katie↗

Phase-controlled enhancement of photon lifetime in coupled superconducting cavities.

The photon lifetime of superconducting cavities is essential forthe long coherence of quantum computing units and sensors. Wediscover that the photon lifetime of cavity field in a couple- cavitysystem is modified by the phases of the initial states and thephase in the coupling channel. Experimentally by performingring-down measurement for two coupled 3D superconductingcavities, we observed a factor of two enhancement in cavityphoton lifetime. The result open new avenues for improvingperformances of superconducting cavities and quantum systems.

43 PARTICLE ACCELERATORS↗

Evaluating Microchannel Heat Exchanger Lifetime for Concentrating Solar Power Applications Research Performance Progress Report (RPPR-1)

Microchannel heat exchanger technology is being pursued for next generation CSP concepts for primary power cycle heat addition and power cycle heat recuperation due to the high heat transfer coefficients and pressure containment advantages of small sCO 2 channels. The economics of future CSP plants as dictated by the SETO 2020 or 2030 targets depend on a heat exchanger with a 30-year lifetime (resisting creep, fatigue, corrosion, erosion) and operational characteristics such as fast ramping and the ability to withstand thermal shock. However, the lifetime and operational limits of microchannel heat exchangers operating at high temperatures, particularly those constructed from high-nickel alloys, are not well known. This uncertainty has resulted in heat exchanger vendors not being able to accurately forecast heat exchanger lifetime as required by customers, specify operational limits as required by process engineers to prevent premature heat exchanger failure, or overdesign heat exchanger which leads to higher cost than necessary.

14 SOLAR ENERGY↗

Degradation Mode Identification by Photocarrier Lifetime Spectroscopy on Devices and Test Structures

In this presentation, I examine the basic concepts of the device physics that can be used to distinguish various degradation and recovery modes on a cell level. The known degradation modes (bulk LeTID and LID, UVID, etc.) are due to defects and impurities that cause the photocarrier recombination according to Shockley-Reed-Hall (SRH) statistics. The SRH recombination rate strongly depends on the balance of electron and hole capture rates into the defects, which in turn, are governed by their local concentrations. The strongest recombination takes place at approximately equal concentrations of electrons and holes, while at low injection conditions (when one type of carrier dominates) the SRH recombination is suppressed. For cell degradation modes that affect the passivated interface (UVID, H-induced TOPCon contact degradation) the defects are at the interface under low-injection conditions due to either high local doping or the adjacent built-in charge in the dielectric. This mode is characterized by changes in the "diode prefactor" J01 slope in the inverse lifetime-injection level curve. In contrast, bulk degradation (LeTID, LID) affects bulk lifetime, with J01 slope unchanged. Carrier lifetime - injection level plots therefore serve as clear indicators of different degradation modes and are shown by experimental examples.

14 SOLAR ENERGY↗

Extending Component Lifetime And Improving Inverter Reliability (ECLAIIR)

Inverter reliability remains one of the most persistent challenges limiting the performance, availability, and economic viability of utility‑scale photovoltaic (PV) plants. Industry data consistently show that inverters account for the highest share of corrective maintenance events and unplanned outages across PV fleets. These failures result in energy losses, increased O&M costs, and reduced confidence in long‑term solar asset performance. Motivated by these challenges, this project—Extending Component Lifetime and Improving Inverter Reliability (ECLAIIR)—was undertaken to systematically investigate inverter degradation and failure mechanisms, develop predictive maintenance capabilities, and establish data‑driven pathways to improve service life and reduce the Levelized Cost of Energy (LCOE) for large‑scale PV systems. The primary goal of the project was to identify pre‑failure signatures in string inverters using both lab‑based accelerated lifetime testing and field‑based data and to develop predictive maintenance algorithms that can anticipate inverter faults before they occur. Through collaboration with inverter testing laboratory, solar PV plant owner, and failure‑analysis experts, the project advanced the technical understanding of inverter reliability. By instrumenting inverters with thermistors, humidity sensors, power‑quality meters, and acoustic sensors, the research established how multiple sensing modalities can reliably detect deviations from normal behavior hours to days before failure. These findings substantially enhance scientific understanding of inverter failure kinetics and provide the PV industry with the most comprehensive cross‑OEM characterization of early‑stage failure indicators reported to date. Technically, the project demonstrated the effectiveness of predictive maintenance by developing and validating the PreDICT (Predictive Diagnostics of PV Inverters Using Condition Monitoring and Trend Analysis) framework—a multi‑layer diagnostic architecture combining peer‑to‑peer analytics, historical trend modeling, and advanced machine‑learning techniques such as the Sequential Conditional Variational Autoencoder (SCVAE). This predictive model achieved more than 90% accuracy in detecting pre‑failure conditions and provided up to four days of lead time before inverter failure in field scenarios. Economically, the project’s LCOE analysis showed that predictive maintenance can reduce lifetime energy losses and minimize corrective maintenance interventions. Modeling indicated that, depending on inverter failure rates and replacement timelines, predictive maintenance can significantly reduce LCOE impacts associated with inverter downtime: from as high as 19.4% under conventional maintenance strategies to 0.1%–10.17% when predictive analytics are adopted. These results confirm that predictive maintenance is both technically feasible and economically advantageous for utilities and plant operators. The project’s findings also have broad public benefit. By improving inverter reliability and reducing downtime, predictive maintenance directly increases electricity generation from existing PV assets. Enhanced reliability lowers operational costs for utilities, which can translate over time into lower energy costs for consumers. Furthermore, the project’s technical publications, conference presentations, and industry workshops ensure that knowledge gained is shared broadly across the solar industry, supporting workforce development and enabling utilities of all sizes to adopt modern asset‑health monitoring practices. The retrofitting case study and service‑life prediction framework further support informed decision‑making for aging PV fleets, helping operators extend system life and reduce electronic waste. In summary, the ECLAIIR project significantly advanced the state of knowledge on inverter degradation, demonstrated the technical and economic value of predictive maintenance, and delivered actionable tools and insights that support more reliable, cost‑effective, and sustainable PV plant operation. The outcomes of this project will continue to inform utility practices, guide inverter design improvements, and strengthen the long‑term performance of solar assets nationwide.

14 SOLAR ENERGY↗

LIFETIME PREDICTION FOR MODEL 9975 O-RINGS IN KAMS

The Savannah River Site (SRS) is currently storing plutonium materials in the K-Area Materials Storage (KAMS) facility. The materials are packaged per the DOE 3013 Standard and transported and stored in KAMS in Model 9975 shipping packages, which include double containment vessels sealed with dual O-rings made of Parker Seals compound V0835-75 (based on Viton{reg_sign} GLT). The outer O-ring of each containment vessel is credited for leaktight containment per ANSI N14.5. O-ring service life depends on many factors, including the failure criterion, environmental conditions, overall design, fabrication quality and assembly practices. A preliminary life prediction model has been developed for the V0835-75 O-rings in KAMS. The conservative model is based primarily on long-term compression stress relaxation (CSR) experiments and Arrhenius accelerated-aging methodology. For model development purposes, seal lifetime is defined as a 90% loss of measurable sealing force. Thus far, CSR experiments have only reached this target level of degradation at temperatures {ge} 300 F. At lower temperatures, relaxation values are more tolerable. Using time-temperature superposition principles, the conservative model predicts a service life of approximately 20-25 years at a constant seal temperature of 175 F. This represents a maximum payload package at a constant ambient temperature of 104 F, the highest recorded in KAMS to date. This is considered a highly conservative value as such ambient temperatures are only reached on occasion and for short durations. The presence of fiberboard in the package minimizes the impact of such temperature swings, with many hours to several days required for seal temperatures to respond proportionately. At 85 F ambient, a more realistic but still conservative value, bounding seal temperatures are reduced to {approx}158 F, with an estimated seal lifetime of {approx}35-45 years. The actual service life for O-rings in a maximum wattage package likely lies higher than the estimates due to the conservative assumptions used for the model. For lower heat loads at similar ambient temperatures, seal lifetime is further increased. The preliminary model is based on several assumptions that require validation with additional experiments and longer exposures at more realistic conditions. The assumption of constant exposure at peak temperature is believed to be conservative. Cumulative damage at more realistic conditions will likely be less severe but is more difficult to assess based on available data. Arrhenius aging behavior is expected, but non-Arrhenius behavior is possible. Validation of Arrhenius behavior is ideally determined from longer tests at temperatures closer to actual service conditions. CSR experiments will therefore continue at lower temperatures to validate the model. Ultrasensitive oxygen consumption analysis has been shown to be useful in identifying non-Arrhenius behavior within reasonable test periods. Therefore, additional experiments are recommended and planned to validate the model.

42 ENGINEERING↗

Temperature and Lifetime Measurements in the SSX Wind Tunnel

We describe ion and electron temperature measurements in the Swarthmore Spheromak Experiment (SSX) MHD wind tunnel with the goal of understanding limitations on the lifetime of our Taylor-state plasma. A simple model based on the equilibrium eigenvalue and Spitzer resistivity predicted the lifetime satisfactorily during the first phase of the plasma evolution. We measured an average T e along a chord by taking the ratio of the C I I I 97.7 nm to C I V 155 nm line intensities using a vacuum ultraviolet (VUV) monochromator. We also recorded local measurements of T e and n e using a double Langmuir probe in order to inform our interpretation of the VUV data. Our results indicated that the plasma decayed inductively during a large part of the evolution. Ion Doppler spectroscopy measurements suggested that ions cooled more slowly than would be expected from thermal equilibration with the electrons, which maintained a constant temperature throughout the lifetime of the plasma.

Kaur, Manjit (ORCID:0000000160086676)↗

Radiative lifetimes and band oscillator strengths for metal oxides. II - SiO E 1 Sigma /+/-X 1 Sigma /+/

Use of an electron-beam phase-shift apparatus to obtain the radiative lifetimes for vibrational levels of the SiO E 1 Sigma (+) state. It is found that the radiative lifetimes for the vibrational transitions of the E-X band are independent of the vibrational upper state. The measured phase shifts yield cascade free lifetimes of 10.5 plus or minus 1.1 nsec for v' from 1 to 7. Spectroscopic data from Elander and Lagerqvist (1971) were used to calculate potential curves by the Klein-Dunham procedure, and Franck-Condon factors and r-centroids for the transition were computed.

Elander, N.↗

The lifetime and evolution of fibrils

A detailed study was made of the lifetimes and evolution of fibrils in McMath 12417, using high resolution filtergrams in H alpha and CaII K made at Big Bear Solar Observatory. It was found that the lifetime of a fibril increases monotonically with its length. This relationship, together with the form of the variation of fibril lengths as a function of time, suggests that fibrils result from material being impulsively injected into magnetic field lines at approximately 30 km/sec, and returning under gravity. The lifetimes and apparent lengths of fibrils are then a function of the inclination of the field lines only. A study of wavelength scans through the H alpha line confirms that the apparent expansion and contraction of fibrils represents true mass motion.

Marsh, K. A.↗

Dependence of the charge exchange lifetimes on mirror latitude

The dependence of the charge exchange lifetimes on the mirror latitude for ions mirroring off the geomagnetic equator was re-computed using the improved hydrogen distribution models. The Chamberlain model was used to define the spatial distribution of the neutral hydrogen environment through which the ring current ions traverse. The resultant dependence of the charge exchange lifetime on mirror latitude is best fitted by the approximation that contains the charge exchange lifetime for equatorial particles.

Smith, P. H.↗

Orbital lifetime capabilities of digital programs RMDAP and Monster

The orbital lifetime study capabilities of the Reference Mission Design and Analysis Program (RMDAP) and the Apollo Mission Planning and Real-Time Rendezvous Support Program (ARRS or Monster) were studied. Output and program versatility, that is, the methods with which each program permits user definition of the major factors affecting orbital lifetimes, are discussed. In addition, orbit maintenance is examined and sample runs are compared. Since each program has special capabilities in different areas, it is left to the investigator's discretion as to the preferable program to employ for his lifetime study purposes.

Source record↗

Dependence of the charge exchange lifetimes on mirror latitude

The dependence of the charge exchange lifetimes on the mirror latitude for ions mirroring off the geomagnetic equator has been re-computed using improved hydrogen distribution models. The Chamberlain model, with the input parameters determined by recent satellite observations, has been used to define the spatial distribution of the neutral hydrogen environment through which the ring current ions traverse. The resultant dependence of the charge exchange lifetime, tau, on mirror latitude, lambda-m, is best fit by the approximation tau-m = tau-e cos 3.5 lambda-m, where tau-e is the charge exchange lifetime for the equatorial particles.

Smith, P. H.↗