Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Connected Component”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Evidence against the wobbling nature of low-spin bands in 135 Pr

The electromagnetic character of the ΔI=1 transitions connecting the 1- to 0-phonon and the 2- to 1-phonon wobbling bands should be dominated by an E2 component, due to the collective motion of the entire nuclear charge. In the present work it is shown, based on combined angular correlation and linear polarization measurements, that the mixing ratios of all analyzed connecting transitions between low-lying bands in 135 Pr interpreted as 0-, 1-, and 2-phonon wobbling bands, have absolute values smaller than one. This indicates predominant M1 magnetic character, which is incompatible with the proposed wobbling nature. All experimental observables are instead in good agreement with quasiparticle-plus-triaxial-rotor model calculations, which describe the bands as resulting from a rapid re-alignment of the total angular momentum from the short to the intermediate nuclear axis

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2003

Global Time-Variable Gravity and its Geophysical/Climatic Connections

Any large mass transport in the Earth system produces changes in the gravity field. Low harmonic degree components of such variations have been observed by the satellite-laser-ranging (SLR) technique, particularly in 52, the Earth's dynamic oblateness. 52 has long been observed to undergo a slight decrease due to the post-glacial rebound of the mantle -- until around 1998, when it switched quite suddenly to an increase trend which continued to 2001 before sharply turning back to normal , signifying a large change in global mass distribution whose 52 effect overshadows that of the post-glacial rebound over interannual timescales. Intriguing evidences have been found in the Ocean water distribution, especially related to the Pacific Decadal Oscillation in the extratropical Pacific basins, that may be responsible for this 52 anomaly. Besides the lowest-degree 52, recent updates in the SLR-derived time series of the Earth's low-degree gravity components also show shorter wavelength zonal and other longitudinal signals. While the formal uncertainty of these terms is significantly higher than that for 52, some of these series have significant signal that appears to be climatic in origin. For example, there is a significant correlation of the sectoral S2,2 with the Tahiti-Darwin Southern Oscillation Index (SOI), but preceding SO1 by about 1 year. Similar cases demonstrate the utility of assessing the mass component of climate variations. We will present these intriguing results.

Chao, Benjamin F.↗
NASA NTRS2003

Low-Degree Time-Variable Gravity and Geophysical/Climatic Connections

Any large mass transport in the Earth system produces changes in the gravity field. Low harmonic degree components of such variations have been observed by the satellite-laser-ranging (SLR) technique, particularly in J2, the Earth's dynamic oblateness. J2 has long been observed to undergo a slight decrease due primarily to the post-glacial rebound of the mantle -- until around 1998, when it switched quite suddenly to an increase trend which continued to 2001 before turning back, signifymg a large, anomalous mass redistribution whose J2 effect overshadows that of the post-glacial rebound over interannual timescales. Intriguing evidences have been found in the extratropical Pacific basins, especially related to the Pacific Decadal Oscillation, and in land hydrology. We will examine the latest results based on ocean altimetry, sea-surface temperature, and ocean and hydrology model outputs. Besides 52, the SLR-derived time series of the Earth's low-degree gravity components also show shorter wavelength zonal and other longitudinal signals. While the formal uncertainty of these terms is significantly higher, some of these series have significant signal that show correlation to various climatic signals. For example, the SLR-observed S2,l tesseral (and 53 zonal) coefficients compare favorably with those computed from the NCEP atmospheric pressure field. There is a significant correlation of the sectoral S2,2 with the Southern Oscillation Index signifying the influence of El NinoLa Nina, but preceding SO1 by about 1 year. Cases such as these demonstrate the utility of assessing the mass component of climate variations.

Chao, Benjamin F.↗
NASA NTRS2003

Time-Variable Gravity and Ocean Connections

Any large mass transport in the Earth system produces changes in the gravity field. Low harmonic degree components of such gravity variations have been observed by the satellite-laser-ranging (SLR) technique for the past quarter century, particularly in 52, the Earth's dynamic oblateness. 52 undergoes a slight decrease due primarily to the post-glacial rebound of the mantle, but large interannual anomalies have been observed, notably during 1998-2002. Intriguing evidences for the cause of the latter have been found in the extratropical Pacific basins, especially related to the Pacific Decadal Oscillation, and perhaps in related land hydrology. We will examine the latest results based on ocean altimetry, sea-surface temperature, and ocean and hydrology model outputs. Without firm estimates for the steric effects (which have no gravity signal), we will point out possible underestimation of OGCMs with respect to temporal variabilities. Besides J2, SLR also derived time series for other low-degree gravity components. While the formal uncertainty of these terms is significantly higher, some of these series have significant signal that show correlation to various climatic signals. For example, there is a significant correlation of the sectoral S2,2 with the Southern Oscillation Index signifying the influence of El Nino/La Nina. Cases such as these demonstrate the utility of assessing the mass component of climate variations, and anticipate the utility of GRACE-type space gravity observations with much higher spatial resolution.

Chao, Benjamin F.↗
DOE OSTI2020

Graph Theory and IC Component Design Analysis

Graph analysis in large integrated circuit (IC) designs is an essential tool for verifying design logic and timing via dynamic timing analysis (DTA). IC designs resemble graphs with each logic gate as a vertex and the conductive connections between gates as edges. Using DTA digital statistical correlations, graph condensation, and graph partitioning, it is possible to identify high-entropy component centers and paths within an IC design. Identification of high-entropy component centers (HECC) enables focused DTA, effectively lowering the computational complexity of DTA on large integrated circuit graphs. In this paper, a devised methodology termed IC layout subgraph component center identification (CCI) is used to identify described. CCI lowers DTA computationally complexity by condensing IC graphs into reduced subgraphs in which dominant logic functions are verified.

42 ENGINEERING↗
DOE OSTI2022

Improvements to the High-Field-Side Transient CHI System on QUEST

Transient coaxial helicity injection (CHI) is a promising candidate for solenoid-free plasma current start-up in a low-aspect-ratio tokamak in support of developing fully non-inductive scenarios. The aim of the transient CHI research on QUEST is to develop a reactor-relevant CHI design. On QUEST, a CHI discharge is initiated by driving current along magnetic field lines that connect an electrically insulated electrode plate (which is referred to as a bias electrode) to a vessel component at the bottom region of the spherical tokamak. In the first application of CHI on QUEST, the electrically insulated electrode plate was biased with respect to the outer vessel in a configuration referred to as low-field-side (LFS) injection. To maintain a narrow injector flux footprint width throughout the discharge, QUEST is now developing a high-field-side (HFS) injection configuration, in which the electrically insulated electrode plate is biased with respect to the inner vessel components. Through the implementation of a CHI-dedicated gas injection system, studies in the HFS injection configuration have now demonstrated good magnetic flux evolution into the vacuum vessel. Toroidal currents up to 43 kA have been achieved, and the generated current has increased in proportion to the magnetic flux connecting the electrodes. Finally, these results which show agreement with the CHI-scaling suggest that much higher levels of toroidal current can be generated on QUEST in an optimized CHI system in which the magnetic flux connecting the CHI electrodes is further increased.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Leaky Buddies: Cross-Component Covert Channels on Integrated CPU-GPU Systems

Graphics Processing Units (GPUs) are ubiquitous components used across the range of today’s computing plat- forms, from phones and tablets, through personal computers, to high-end server class platforms. With the increasing importance of graphics and video workloads, recent processors are shipped with GPU devices that are integrated on the same chip. Integrated GPUs share some resources with the CPU and as a result, there is a potential for microarchitectural attacks from the GPU to the CPU or vice versa. We consider the potential for covert channel attacks that arise either from shared microarchitectural components (such as caches) or through shared contention domains (e.g., shared buses). We illustrate these two types of channels by developing two reliable covert channel attacks. The first covert channel uses the shared LLC cache in Intel’s integrated GPU architectures. The second is a contention based channel targeting the ring bus connecting the CPU and GPU to the LLC. This is the first demonstrated microarchitectural attack crossing the component boundary (GPU to CPU or vice versa). Cross-component channels introduce a number of new challenges that we had to overcome since they occur across heterogeneous components that use different computation models and are interconnected using asymmetric memory hierarchies. We also exploit GPU parallelism to increase the bandwidth of the communication, even without relying on a common clock. The LLC based channel achieves a bandwidth of 120 kbps with a low error rate of 2%, while the contention based channel delivers up to 400 kbps with a 0.8% error rate. We also demonstrate a proof- of-concept prime-and-probe side channel attack that probes the full LLC from the GPU.

Cyber secruity, high performance comptuing, Hetero↗
NASA NTRS1999

Development of Advanced In-Cylinder Components and Tribological Systems for Low Heat Rejection Diesel Engines

In-cylinder components and tribological system concepts were designed, fabricated and tested at conditions anticipated for a 55% thermal efficiency heavy duty diesel engine for the year 2000 and beyond. A Cummins L10 single cylinder research engine was used to evaluate a spherical joint piston and connecting rod with 19.3 MPa (2800 psi) peak cylinder pressure capability, a thermal fatigue resistant insulated cylinder head, radial combustion seal cylinder liners, a highly compliant steel top compression ring, a variable geometry turbocharger, and a microwave heated particulate trap. Components successfully demonstrated in the final test included spherical joint connecting rod with a fiber reinforced piston, high conformability steel top rings with wear resistant coatings, ceramic exhaust ports with strategic oil cooling and radial combustion seal cylinder liner with cooling jacket transfer fins. A Cummins 6B diesel was used to develop the analytical methods, materials, manufacturing technology and engine components for lighter weight diesel engines without sacrificing performance or durability. A 6B diesel engine was built and tested to calibrate analytical models for the aluminum cylinder head and aluminum block.

Yonushonis, T. M.↗
DOE OSTI2026

Hypochlorite Redox Chemistry Enables High-Voltage and High-Power Saltwater Batteries

Saltwater batteries (SWBs) are promising alternatives to lithium-ion batteries for large-scale stationary energy storage. However, the performance of conventional oxygen redox-based saltwater battery systems is often constrained by sluggish oxygen evolution and reduction reactions (OER/ORR) at the cathode, leading to low voltage efficiency and limited power density. Here, OER and ORR are replaced by hypochlorite-based redox reactions through the introduction of sodium hypochlorite into saltwater. Operando pH and dissolved oxygen measurements confirm that OER and ORR are minimized and that hypochlorite redox reactions dominate the cathode behavior. Owing to the higher operating potential and faster reaction kinetics, the hypochlorite-redox-based SWBs delivers a higher discharge voltage of 3.3 V and reduced charge-discharge voltage polarization to 0.66 V. Further improvement is achieved by adjusting the saltwater pH to near-neutral conditions, increasing the discharge voltage to 3.5 V and more than doubling the peak power. The hypochlorite redox environment also exhibits chemical stability with key cell components, including the solid electrolyte and cathode current collectors. Operation of series-connected cells and cells employing hard carbon anodes demonstrates scalability and compatibility with alternative anode materials. These results provide a strong foundation for next-generation SWBs targeting large-scale stationary energy storage applications.

Go, Wooseok [ORNL]↗
DOE OSTI2025

Coupling magnons to an opto-electronic parametric oscillator

Hybrid magnonic systems have emerged as versatile modular components for quantum signal transduction and sensing applications owing to their capability of connecting distinct quantum platforms. To date, the majority of the magnonic systems have been explored in a local, near-field scheme, due to the close proximity required for realizing a strong coupling between magnons and other excitations. This constraint greatly limits the applicability of magnons in developing remotely coupled, distributed quantum network systems. On the contrary, opto-electronic architectures hosting self-sustained oscillations have been a unique platform for long-haul signal transmission and processing. Here, we integrated an opto-electronic oscillator with a magnonic oscillator consisting of a microwave waveguide and a Y 3 Fe 5 O 12 (YIG) sphere, and demonstrated strong and coherent coupling between YIG’s magnon modes and the opto-electronic oscillator’s characteristic photon modes—revealing the hallmark anti-crossing gap in the measured spectrum. In particular, the photon mode is produced on-demand via a nonlinear, parametric process as stipulated by an external seed pump. Both the internal cavity phase and the external pump phase can be precisely tuned to stabilize either degenerate or nondegenerate auto-oscillations. Our result lays out a new, hybrid platform for investigating the long-distance coupling and nonlinearity in coherent magnonic phenomena, which may be found useful in constructing the future “distributed hybrid magnonic systems.”

36 MATERIALS SCIENCE↗
NASA NTRS1983

Statistical theory for estimating sampling errors of regional radiation averages based on satellite measurements

The processes which determine the weather and climate are driven by the radiation received by the earth and the radiation subsequently emitted. A knowledge of the absorbed and emitted components of radiation is thus fundamental for the study of these processes. In connection with the desire to improve the quality of long-range forecasting, NASA is developing the Earth Radiation Budget Experiment (ERBE), consisting of a three-channel scanning radiometer and a package of nonscanning radiometers. A set of these instruments is to be flown on both the NOAA-F and NOAA-G spacecraft, in sun-synchronous orbits, and on an Earth Radiation Budget Satellite. The purpose of the scanning radiometer is to obtain measurements from which the average reflected solar radiant exitance and the average earth-emitted radiant exitance at a reference level can be established. The estimate of regional average exitance obtained will not exactly equal the true value of the regional average exitance, but will differ due to spatial sampling. A method is presented for evaluating this spatial sampling error.

Smith, G. L.↗
NASA NTRS1986

Space station support of manned Mars missions

The assembly of a manned Mars interplanetary spacecraft in low Earth orbit can be best accomplished with the support of the space station. Station payload requirements for microgravity environments of .001 g and pointing stability requirements of less than 1 arc second could mean that the spacecraft may have to be assembled at a station-keeping position about 100 meters or more away from the station. In addition to the assembly of large modules and connective structures, the manned Mars mission assembly tasks may include the connection of power, fluid, and data lines and the handling and activation of components for chemical or nuclear power and propulsion systems. These assembly tasks will require the use of advanced automation and robotics in addition to Orbital Maneuvering Vehicle and Extravehicular Activity (EVA) crew support. Advanced development programs for the space station, including on-orbit demonstrations, could also be used to support manned Mars mission technology objectives. Follow-on studies should be conducted to identify space station activities which could be enhanced or expanded in scope (without significant cost and schedule impact) to help resolve key technical and scientific questions relating to manned Mars missions.

Holt, Alan C.↗
NASA NTRS1990

Flow-Control Unit For Nitrogen And Hydrogen Gases

Gas-flow-control unit installed and removed as one piece replaces system that included nine separately serviced components. Unit controls and monitors flows of nitrogen and hydrogen gases. Designed for connection via fluid-interface manifold plate, reducing number of mechanical fluid-interface connections from 18 to 1. Unit provides increasing reliability, safety, and ease of maintenance, and for reducing weight, volume, and power consumption.

Chang, B. J.↗
NASA NTRS1992

Development of advanced seal verification

The purpose of this research is to develop a technique to monitor and insure seal integrity with a sensor that has no active elements to burn-out during a long duration activity, such as a leakage test or especially during a mission in space. The original concept proposed is that by implementing fiber optic sensors, changes in the integrity of a seal can be monitored in real time and at no time should the optical fiber sensor fail. The electrical components which provide optical excitation and detection through the fiber are not part of the seal; hence, if these electrical components fail, they can be easily changed without breaking the seal. The optical connections required for the concept to work does present a functional problem to work out. The utility of the optical fiber sensor for seal monitoring should be general enough that the degradation of a seal can be determined before catastrophic failure occurs and appropriate action taken. Two parallel efforts were performed in determining the feasibility of using optical fiber sensors for seal verification. In one study, research on interferometric measurements of the mechanical response of the optical fiber sensors to seal integrity was studied. In a second study, the implementation of the optical fiber to a typical vacuum chamber was implemented and feasibility studies on microbend experiments in the vacuum chamber were performed. Also, an attempt was made to quantify the amount of pressure actually being applied to the optical fiber using finite element analysis software by Algor.

Workman, Gary L.↗
NASA NTRS1989

Wind Generators

When Enerpro, Inc. president, Frank J. Bourbeau, attempted to file a patent on a system for synchronizing a wind generator to the electric utility grid, he discovered Marshall Space Flight Center's Frank Nola's power factor controller. Bourbeau advanced the technology and received a NASA license and a patent for his Auto Synchronous Controller (ASC). The ASC reduces generator "inrush current," which occurs when large generators are abruptly brought on line. It controls voltage so the generator is smoothly connected to the utility grid when it reaches its synchronous speed, protecting the components from inrush current damage. Generator efficiency is also increased in light winds by applying lower than rated voltage. Wind energy is utilized to drive turbines to generate electricity for utility companies.

Source record↗
NASA NTRS2004

Supermassive Black Holes and Galaxy Evolution

Supermassive black holes appear to be generic components of galactic nuclei. The formation and growth of black holes is intimately connected with the evolution of galaxies on a wide range of scales. For instance, mergers between galaxies containing nuclear black holes would produce supermassive binaries which eventually coalesce via the emission of gravitational radiation. The formation and decay of these binaries is expected to produce a number of observable signatures in the stellar distribution. Black holes can also affect the large-scale structure of galaxies by perturbing the orbits of stars that pass through the nucleus. Large-scale N-body simulations are beginning to generate testable predictions about these processes which will allow us to draw inferences about the formation history of supermassive black holes.

Merritt, D.↗
NASA NTRS2011

Image Segmentation, Registration, Compression, and Matching

A novel computational framework was developed of a 2D affine invariant matching exploiting a parameter space. Named as affine invariant parameter space (AIPS), the technique can be applied to many image-processing and computer-vision problems, including image registration, template matching, and object tracking from image sequence. The AIPS is formed by the parameters in an affine combination of a set of feature points in the image plane. In cases where the entire image can be assumed to have undergone a single affine transformation, the new AIPS match metric and matching framework becomes very effective (compared with the state-of-the-art methods at the time of this reporting). No knowledge about scaling or any other transformation parameters need to be known a priori to apply the AIPS framework. An automated suite of software tools has been created to provide accurate image segmentation (for data cleaning) and high-quality 2D image and 3D surface registration (for fusing multi-resolution terrain, image, and map data). These tools are capable of supporting existing GIS toolkits already in the marketplace, and will also be usable in a stand-alone fashion. The toolkit applies novel algorithmic approaches for image segmentation, feature extraction, and registration of 2D imagery and 3D surface data, which supports first-pass, batched, fully automatic feature extraction (for segmentation), and registration. A hierarchical and adaptive approach is taken for achieving automatic feature extraction, segmentation, and registration. Surface registration is the process of aligning two (or more) data sets to a common coordinate system, during which the transformation between their different coordinate systems is determined. Also developed here are a novel, volumetric surface modeling and compression technique that provide both quality-guaranteed mesh surface approximations and compaction of the model sizes by efficiently coding the geometry and connectivity/topology components of the generated models. The highly efficient triangular mesh compression compacts the connectivity information at the rate of 1.5-4 bits per vertex (on average for triangle meshes), while reducing the 3D geometry by 40-50 percent. Finally, taking into consideration the characteristics of 3D terrain data, and using the innovative, regularized binary decomposition mesh modeling, a multistage, pattern-drive modeling, and compression technique has been developed to provide an effective framework for compressing digital elevation model (DEM) surfaces, high-resolution aerial imagery, and other types of NASA data.

Yadegar, Jacob↗