Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hydraulics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Borehole hydraulic coal mining system analysis

The borehole hydraulic coal mining system accesses the coal seam through a hole drilled in the overburden. The mining device is lowered through the hole into the coal seam where it fragments the coal with high pressure water jets which pump it to the surface as a slurry by a jet pump located in the center of the mining device. The coal slurry is then injected into a pipeline for transport to the preparation plant. The system was analyzed for performance in the thick, shallow coal seams of Wyoming, and the steeply pitching seams of western Colorado. Considered were all the aspects of the mining operation for a 20-year mine life, producing 2,640,000 tons/yr. Effects on the environment and the cost of restoration, as well as concern for health and safety, were studied. Assumptions for design of the mine, the analytical method, and results of the analysis are detailed.

Floyd, E. L.↗
NASA NTRS1977

Engine Hydraulic Stability

An analytical injector model was developed specifically to analyze combustion instability coupling between the injector hydraulics and the combustion process. This digital computer dynamic injector model will, for any imposed chamber of inlet pressure profile with a frequency ranging from 100 to 3000 Hz (minimum) accurately predict/calculate the instantaneous injector flowrates. The injector system is described in terms of which flow segments enter and leave each pressure node. For each flow segment, a resistance, line lengths, and areas are required as inputs (the line lengths and areas are used in determining inertance). For each pressure node, volume and acoustic velocity are required as inputs (volume and acoustic velocity determine capacitance). The geometric criteria for determining inertances of flow segments and capacitance of pressure nodes was set. Also, a technique was developed for analytically determining time averaged steady-state pressure drops and flowrates for every flow segment in an injector when such data is not known. These pressure drops and flowrates are then used in determining the linearized flow resistance for each line segment of flow.

Kesselring, R. C.↗
NASA NTRS1979

Stable hydraulic pressure regulator

Neither sensing line restrictors nor frictional dampers are required for stability. Analysis presents method by which stability margin, response, and droop magnitude can be incorporated during design of direct-acting hydraulic pressure regulators.

Gold, H.↗
NASA NTRS1977

The design of hydraulic pressure regulators that are stable without the use of sensing line restrictors or frictional dampers

Parameters controlled in design determine the stability of hydraulic pressure regulators in service. The non-linear sensing line restrictor can provide stability, but degrades the transient response. Linear damping is not always physically realizable and is sensitive to clearance and viscosity. Design relationships are analytically derived through which regulators can be made to be stable without the use of either of these damping means. The analytical distinctions between the parameters derived and those in prior literature are discussed. An analytically derived circuit component that stabilizes an otherwise unstable regulator and its experimental verification is described.

Gold, H.↗
NASA NTRS1978

Hydraulic model of the Chesapeake Bay

Preliminary planning for the formulation of the first year of hydraulic studies on the Chesapeake Bay model was recently completed. The primary purpose of this initial effort was to develop a study program that is both responsive to problems of immediate importance and at the same time ensure that from the very beginning of operation maximum economical use is made of the model. The formulation of this preliminary study plan involved an extensive analysis of the environmental, economic, and social aspects of a series of current problems in order to establish a priority listing of their importance. The study program that evolved is oriented towards the analysis of the effects of some of the works of man on the Chesapeake Bay estuarine environment.

Robinson, A. E., Jr.↗
NASA NTRS1981

Lock for hydraulic actuators

Two clamps hold rod in fixed extension from cylinder even when power is off, converting actuator into stiff structural member. Locked actuator is useful as mechanical support or linkage or as fail-safe device in case of loss of hydraulic pressure. Potential applications include manufacturing processes and specialized handling and holding devices.

Wood, R. H.↗
NASA NTRS1980

Hydraulic forces caused by annular pressure seals in centrifugal pumps

The hydraulic forces caused by annular pressure seals were investigated. The measured inlet and exit loss coefficients of the flow through the seals were much smaller than the conventional values. The results indicate that the damping coefficient and the inertia coefficient of the fluid film in the seal are not affected much by the rotational speed or the eccentricity of the rotor, though the stiffness coefficient seemed to be influenced by the eccentricity.

Iino, T.↗
NASA NTRS1983

Flow Distribution in Hydraulic Systems

General Flow Distribution Program analyzes pressure drops and flow distribution in closed and open hydraulic systems. Analyzes system on basis of incompressible flow though system may contain either compressible or incompressible fluid. Program solves fixed or variable flow problems for series, parallel, or series/parallel systems.

Nguyen, S. N.↗
NASA NTRS1983

Tubing Cutter is Activated Hydraulically

Hydraulically-actuated tubing cutter severs tubing when operator squeezes handle grip. "Gooseneck" extension enables cutter to be used in areas where accessiblity is limited. Cutter has potential as flight-line tool and is useful in automobile and fire rescue work.

Mcsmith, D. G.↗
NASA NTRS1982

Pressure losses and heat transfer in non-circular channels with hydraulically smooth walls

The influence of channel geometry on pressure losses and heat transfer in noncircular channels with hydraulically smooth walls was studied. As a basic assumption for the description of this influence, integral geometrical criteria, selected according to experimental experience, were introduced. Using these geometrical criteria, a large set of experimental data for pressure losses and heat transfer in circular and annular channels with longitudinal fins was evaluated. In this way it as empirically proved that the criteria described channel geometry fairly well.

Malak, J.↗
NASA NTRS1981

The hydraulic windmill

An hydraulic windmill is described. It pumps pressurized oil from rotor shaft level to the ground where a motor generator produces electricity. Alternatively, the useful output may be heat. Rotor speed is governed by a flow valve. Over pressure, the result of high wind velocity, rotates the tail to move the rotor blades out-of-the-wind. Loss of oil pressure causes a brake to close as well as to swing the tail to its maximum distance from the rotor plane.

Browing, J. A.↗
NASA NTRS1981

Hydraulics and geology related to beach restoration in Lee County, Florida

The erosion problem on Captiva Island is discussed. It is due to a deficit in the sand budget of the littoral drift system; a system with losses due to attrition of the particles and mass losses into the lagoons, to offshore, and to lateral transport. The effect that reopening Blind Pass would have, and the placement of sediment retaining structures in the surf zone at the northern and southern limits of the Captiva beach system, wave examined. A geological approach was used to study the origin and dynamic changes that have occurred. Through hydraulic modeling, changes that will occur by reopening and stabilizing Blind Pass are predicted. It is concluded that if the island is to be stabilized, beach nourishment with proper amounts and particle size is a necessity and that jetties adequate to restrict lateral and offshore losses are essential. It is shown that the reopening of Blind Pass would have minimal effects on the passes to the north and south, and would improve the environmental conditions in the sound with no adverse effects on the beach system.

Winton, T.↗
NASA NTRS1984

Barrier Self for Hydraulic Actuators

Barrier seal slows loss of pressurized hydraulic fluid due to leakage in primary seal. Barrier seal, placed downstream of primary O-ring seal, serves as secondary obstacle to leakage.

Prout, R. E.↗
NASA NTRS1984

Hydraulic Tube Expander

Portable hydraulic tube expander expands small, thick-walled tubes in hard-to-reach locations. Tool particularly useful in situations where mechanical expander too fragile to produce desired expansion.

Burley, R. K.↗
NASA NTRS1983

Servo Controlled Variable Pressure Modification to Space Shuttle Hydraulic Pump

Engineering drawings show modifications made to the constant pressure control of the model AP27V-7 hydraulic pump to an electrically controlled variable pressure setting compensator. A hanger position indicator was included for continuously monitoring hanger angle. A simplex servo driver was furnished for controlling the pressure setting servovalve. Calibration of the rotary variable displacement transducer is described as well as pump performance and response characteristics.

Kouns, H. H.↗
NASA NTRS1983

Effects of volute geometry and impeller orbit on the hydraulic performance of a centrifugal pump

Overall performance data was taken for a Plexiglas water pump with a logarithmic spiral volute and rectangular cross sectioned flow channels. Parametric studies were made in which the center of the impeller was offset from the design center of the volute. The rig was also designed such that the impeller was allowed to synchronously orbit by a fixed amount about any center. The studies indicate that decreasing the tongue clearance decreases the head at low flowrates and increases the head at high flowrates. Also, decreasing the volute area in the first half of the volute and holding the tongue clearance the same, resulted in a decreased head for low flowrates but performance at high flowrates was not affected. Finally, the overall hydraulic performance was not affected by the impeller orbitting about the volute center.

Flack, R. D.↗
NASA NTRS1984

Hydraulic jumps in 'viscous' accretion disks

It is proposed that the dissipative process necessary for rapid accretion disk evolution is driven by hydraulic jump waves on the surface of the disk. These waves are excited by the asymmetric nature of the central rotator (e.g., neutron star magnetosphere) and spiral out into the disk to form a pattern corotating with the central object. Disk matter in turn is slowed slightly at each encounter with the jump and spirals inward. In this process, the disk is heated by true turbulence produced in the jumps. Additional effects, such as a systematic misalignment of the magnetic moment of the neutron star until it is nearly orthogonal, and systematic distortion of the magnetosphere in such a way as to form an even more asymmetric central 'paddle wheel', may enhance the interaction with inflowing matter. The application to X-ray sources corresponds to the 'slow' solutions of Ghosh and Lamb, and therefore to rms magnetic fields of about 4 x 10 to the 10th gauss. Analogous phenomena have been proposed to act in the formation of galactic spiral structure.

Michel, F. C.↗
NASA NTRS1985

Measuring Soil Hydraulic Conductivity With Microwaves

Soil mapping for large or small areas done rapidly. Technique requires simple radiometric measurements of L-band (15 to 30 cm) and thermal infrared emissions from ground within 2 days after saturation of surface. Technique based on observation that correlation exists between L-band emissivity and hydraulic conductivity of soil.

Blanchard, B. J.↗