Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELONGATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Varying properties along lengths of temperature limited heaters

A system for heating a subsurface formation is described. The system includes an elongated heater in an opening in the formation. The elongated heater includes two or more portions along the length of the heater that have different power outputs. At least one portion of the elongated heater includes at least one temperature limited portion with at least one selected temperature at which the portion provides a reduced heat output. The heater is configured to provide heat to the formation with the different power outputs. The heater is configured so that the heater heats one or more portions of the formation at one or more selected heating rates.

42 ENGINEERING↗

Device for use in a furnace exhaust stream for thermoelectric generation

A device for generating voltage or electrical current includes an inner elongated member mounted in an outer elongated member, and a plurality of thermoelectric modules mounted in the space between the inner and the outer members. The outer and/or inner elongated members each include a plurality of passages to move a temperature altering medium through the members so that the device can be used in high temperature environments, e.g. the exhaust system of an oxygen fired glass melting furnace. The modules are designed to include a biasing member and/or other arrangements to compensate for differences in thermal expansion between the first and the second members. In this manner, the modules remain in contact with the first and second members. The voltage generated by the modules can be used to power electrical loads.

30 DIRECT ENERGY CONVERSION↗

Systems and methods for preventing flashback in a combustor assembly

Embodiments of the present application include a combustor assembly. The combustor assembly may include a combustion chamber, a first plenum, a second plenum, and one or more elongate air/fuel premixing injection tubes. Each of the elongate air/fuel premixing injection tubes may include a first length at least partially disposed within the first plenum and configured to receive a first fluid from the first plenum. Moreover, each of the elongate air/fuel premixing injection tubes may include a second length disposed downstream of the first length and at least partially disposed within the second plenum. The second length may be formed of a porous wall configured to allow a second fluid from the second plenum to enter the second length and create a boundary layer about the porous wall.

33 ADVANCED PROPULSION SYSTEMS↗

Oxidation resistant high-entropy alloys

Disclosed herein are new face-centered cubic (f.c.c.) high-entropy alloys with compositions (in atomic %) of Fe.sub.aNi.sub.bMn.sub.cAl.sub.dCr.sub.eC.sub.f where a is between 37-43 atomic %, b is between 8-14 atomic %, c is between 32-38 atomic %, d is 4.5-10.5 atomic %, e is between 2.5-9 atomic % and f is between 0-2 atomic %. The undoped alloy has strength of 159 MPa and 40% elongation to failure, but the doped, carbon-containing alloy having 1.1 atomic percent carbon has yield strength of 360 MPa, an ultimate tensile strength (UTS) of 1200 MPa and 50% elongation to failure at room temperature. At 700.degree. C., the yield strength is 214 MPa with 24% elongation to failure. Thus, the present alloy may replace austenitic stainless steels in applications where better strength is needed at both room temperature and elevated temperature in an oxidation resistant alloy.

Baker, Ian↗

Apparatus and method for assembling a pumping tube into an air maintenance tire sidewall groove

Apparatus and method of assembling an elongate air pumping tube into an elongate tire sidewall groove includes engaging the tire sidewall outward surface with an impact wheel at an impact location proximally adjacent and above the elongate groove as the tire is rotated. The groove is thereby spread segment-by-segment for segment-by-segment synchronous insertion of the tube into the groove. The groove is closed segment-by-segment as each spread segment is returned to its original narrower dimension utilizing elastomeric material composition properties of the tire sidewall.

42 ENGINEERING↗

Molten salt environment creep testing extensometry system

Disclosed herein are systems, devices and methods for creep testing selected materials within a high-temperature molten salt environment. Exemplary creep testing systems include a load train for holding a test specimen under a load within a heated inert gas vessel. An extensometry system can be included to measure elongation of the test specimen while under load. The extensometry system can include fixed members and axially translating member that move along with the elongation of the test specimen, and the system can include a sensor to measure the relative axial motion between such components to measure elongation of the test specimen over time. The test specimen can include a cylindrical gage portion having an internal void filled with a molten salt during creep testing to simulate the corrosive effect of the molten salt on the specimen material during testing.

Ren, Wenlin↗

Precision bead forming 3D print head for cementitious materials

A print head for additive manufacturing with a material includes an accumulator comprising an elongated body with an open interior and an inside diameter. A slide tube is slidably mounted within the open interior of the elongated body. The slide tube has a sealing piston head hermetically sealing the open end within the elongated body to define a variable gas containment space. A pressurized gas is supplied to the gas containment space. A rotatable shaping nozzle with an opening for discharging material is provided. A positive displacement extruder delivers material from the accumulator to the nozzle assembly. The nozzle assembly can include a nozzle rotation drive for rotating the shaping nozzle about an axis of rotation. The nozzle opening can be aligned with the axis of rotation, and defines a discharge axis that can be perpendicular to the axis of rotation. A method of additive manufacturing is also disclosed.

Lind, Randall F.↗

Neutronic engine

An internal combustion engine for neutron diffraction analysis is provided. The engine includes an elongated piston chamber formed from an aluminum alloy to ensure maximum neutron visibility into the combustion chamber. An elongated piston assembly reciprocates within the elongated piston chamber, the piston assembly including an upper piston joined to a lower piston. The upper piston and the lower piston are hollow, thereby reducing the reciprocating mass and increasing neutron access to the combustion chamber. The upper piston is lubricated with a neutron-transparent fluorocarbon lubricant such as perfluoropolyether (PFPE), while the lower piston and the crankcase are lubricated with hydrocarbon lubricant. The engine enables 3D and time-resolved measurements of strain, stress, and temperature, as well as phase transformation, texture, and microstructure.

Wissink, Martin L.↗

Unusual Changes of C−H Bond Lengths in Chiral Zinc Complexes Induced by Noncovalent Interactions

In order to better understand the effect of non-covalent weak interactions on molecules, we have explored a variety of weak interactions, such as improper H-bonding (HB), tetrel bonds (TBs) and halogen bonds, in fluorinated chiral zinc complexes. High resolution neutron diffraction studies revealed a methylene carbon-hydrogen bond elongation and shortening due to TB and improper HB interactions, respectively. To show the accumulative effects of multiple weak interactions on the C-H bond, three types of tetrel bonds have been carefully examined. We have also shown how C-H bond elongation can be easily offset by forming an improper HB with the H atom from this C-H bond. Non-covalent interaction and electrostatic potential analysis investigations have been used to affirm the nature of the interactions based on density functional theory (DFT) and other related calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modification of Thermo-Mechanical Properties of Recycled PET by Vinyl Acetate (VAc) Monomer Grafting Using Gamma Irradiation

Vinyl acetate (VAc) monomer of different percentage was grafted onto the recycled polyethylene terephthalate (r-PET) films using gamma irradiation. The properties of these modified films were characterized by Fourier transform infrared spectroscopy (FTIR), mechanical properties testing (Tensile strength, Elongation at break), dynamic mechanical analysis (DMA) and thermo-gravimetric analysis (TGA). The Tensile Strength (TS) of the modified PET film increased by 132.25 % to the highest value of 50.12 MPa at 15% VAc monomer concentration at 3 kGy gamma dose, while the elongation at break (EB) decreased by 31.83 %. FTIR was used to investigate the molecular interaction of the modified films. TGA revealed that curve of the modified PET film shifted toward higher temperature region by 95 °C, which is very close to that of PET film made from virgin flakes. The results indicate that modified PET films of better mechanical and thermal properties were successfully prepared using VAc monomer grafting by gamma irradiation technique.

36 MATERIALS SCIENCE↗

The Influence of Warm abc-Pressing on the Structure and Mechanical Properties of Stable Chromium-Nickel-Molybdenum Steel

The structure and properties of the 17Cr13Ni3Mo0.01C stable austenitic steel subjected to high-temperature plastic deformation by the abc-pressing (multiaxial forging) are investigated in the temperature range from 800 to 600°С. The results of investigations demonstrate that after the abc-pressing the steel has a single-phase austenitic ultrafine-grained structure with the size of its elements (grains and subgrains) of (200 ± 140) nm. The formation of the ultrafine-grained state increases the strength properties (0.2 proof stress increases threefold) and decreases the elongation value of the steel at room temperature compared to the coarse-grained specimens. An analysis of the contributions from hardening during abc-pressing evidences in favor of the strength improvement being primarily due to the grain refinement; it is well described by the Hall–Petch relationship. In this case steel with ultrafine-grained austenitic structure exhibits an effect of structural superplasticity at the temperatures T > 750°С: the elongation value at Т = 800°С is found to be 180%.

36 MATERIALS SCIENCE↗

Microstructure and Mechanical Properties of CNT-Reinforced AZ31 Matrix Composites Prepared Using Hot-Press Sintering

AZ31 matrix composites reinforced by carbon nanotubes (CNTs) were fabricated using hot-press sintering. The microstructure and mechanical properties of the composites (denoted as Mg-3wt.%Al-1wt.%Zn-xwt.%CNTs, x = 0-1.5) were investigated. The results showed that the elastic modulus, yield strength, tensile strength and elongation of the composites were significantly improved when compared with the matrix alloy AZ31. Of the tested composites Mg-3wt.%Al-1wt.%Zn-1.0wt.%CNTs exhibited the most favorable mechanical properties: compared with Mg-3wt.%Al-1wt.%Zn, the elastic modulus improved by 25.85%, yield strength increased by 23.48%, and tensile strength and elongation showed 19.35 and 48.23% improvement, respectively. The fracture surface of the Mg-3wt.%Al-1wt.%Zn-CNTs composites displayed features of brittle fracture, which suggests that CNTs do not markedly enhance the plasticity of AZ31.

36 MATERIALS SCIENCE↗

Effect of Local Post Weld Heat Treatment on Tensile Properties in Friction Stir Welded 2219-O Al Alloy

To improve the formability of the aluminum alloy welds and overcome the size limitation of the bulk post weld heat treatment (BPWHT) on large size friction stir welded joints, a local post weld heat treatment method (LPWHT) was proposed. In this method, the resistance heating as the moving heat source is adopted to only heat the weld seam. The temperature field of LPWHT and its influence on the mechanical properties and formability of FSW 2219-O Al alloy joints was investigated. The evaluation of the tensile properties of FSW samples was also examined by mapping the global and local strain distribution using the digital image correlation methodology. The results indicated that the formability was improved greatly after LPWHT, while the hardness distribution of the FSW joint was homogenized. The maximum elongation can reach 1.4 times that of as-welded joints with increase the strength and the strain of the nugget zone increased from 3 to 8% when annealing at 300 °C. The heterogeneity on the tensile deformation of the as-welded joints was improved by the nugget zone showing large local strain value and the reason was given according to the dimple fracture characteristics at different annealing temperatures. The tensile strength and elongation of LPWHT can reach 93.3 and 96.1% of the BPWHT, respectively. Thus, the LPWHT can be advantageous compared to the BPWHT for large size welds.

36 MATERIALS SCIENCE↗

Mechanical Properties and Corrosion Behavior of As-Cast Mg-Zn-Zr-(La) Magnesium Alloys

The effects of La content on the mechanical properties and corrosion behavior of as-cast Mg-Zn-Zr (ZK) magnesium alloys were investigated. The results showed that La addition to ZK60 alloy resulted in a considerable grain refinement and an increase in the volume fraction of second phases by formation of Mg-Zn-La ternary phase. The tensile tests were performed at both room and elevated temperatures. At room temperature, the yield and tensile strengths and elongation-to-fracture significantly increased with 0.2 wt.% La addition, then deteriorated slightly with increasing La additions above 0.2 wt.%. At 200 °C, the yield and tensile strengths continually improved and elongation-to-fracture decreased with increasing La content due to the presence of thermally stable Mg-Zn-La phase. Immersion and electrochemical corrosion tests revealed that the formation of Mg-Zn-La phases led to a higher amount of cathodic sites and preferential corrosion propagation, and thus a decrease in the corrosion resistance of ZK60 alloys.

36 MATERIALS SCIENCE↗

Size Effect Studies on Tensile Tests for Hot Stamping Steel

Tensile tests have been widely used to determine basic mechanical properties of materials. However, the properties measured may be related to geometrical factors of the tested samples especially for high-strength steels; this makes the properties’ definitions and comparisons difficult. In this study, a series of tensile tests of ultra-high-strength hot-stamped steel were performed; the geometric shapes and sizes as well as the cutting direction were modified. The results demonstrate that the hot-stamped parts were isotropic and the cutting direction had no effect; the measured strengths were practically unrelated to the specimen geometries, including both size and shape. The elongations were slightly related to sample sizes within the studied range but highly depended on the sample shape, represented by the coefficient K. Such phenomena were analyzed and discussed based on microstructural observations and fracture morphologies. Moreover, two widely used elongation conversion equations, the Oliver formula and Barba’s law, were introduced to verify their applicability, and a new interpolating function was developed and compared.

36 MATERIALS SCIENCE↗

Effect of Rolling Temperature on the Microstructure and Tensile Properties of 47Zr-45Ti-5Al-3V Alloy

The 47Zr-45Ti-5Al-3V (wt.%) alloy was solution-treated at 850 and 780 °C for 30 min and then rolled at different temperatures. The effect of rolling temperature on microstructure and tensile properties was investigated. The results showed that the microstructure contained a large amount of α phase at a rolling temperature of 600 °C. As the rolling temperature increased, the amount of α phase decreased, whereas the amount of β phase increased. When the rolling temperature was higher than 700 °C, the alloy was composed of a single β phase. The tensile properties of the alloy depended strongly on rolling temperature. The yield strength and tensile strength decreased with increasing rolling temperature, whereas the elongation increased. At a given rolling temperature, low solution treatment temperature resulted in higher strength and lower elongation than high solution treatment temperature. The fracture mode changed from cleavage fracture and quasi-cleavage fracture to dimple fracture with increasing rolling temperature.

36 MATERIALS SCIENCE↗

Effects of Pouring Temperature and Electromagnetic Stirring on Porosity and Mechanical Properties of A357 Aluminum Alloy Rheo-Diecasting

Semisolid slurry of A357 aluminum alloy was prepared using a temperature-controllable electromagnetic stirrer and rheo-diecast at different temperatures. The effects of pouring temperature and electromagnetic stirring (EMS) on the porosity in rheo-diecast samples, as well as the relation between porosity and mechanical properties, were investigated. The results show that pouring temperature and EMS had minor influences on rheo-diecast microstructure but marked influence on the porosity. With decreasing slurry pouring temperature, the porosity decreased first and then increased, whereas the maximum pore ratio (ratio of shape factor to diameter of the largest pore) increased first and then decreased. The maximum pore ratio determines the level of tensile strength and elongation, and higher mechanical properties can be obtained with smaller and rounder pores in samples. The mechanical properties of the rheo-diecast samples increased linearly with increasing maximum pore ratio. The maximum pore ratio was 1.43 µm{sup −1}, and the minimum porosity level was 0.37% under EMS condition for the rheo-diecast samples obtained at a pouring temperature of 608 °C. With this porosity condition, the maximum tensile strength and elongation were achieved at 274 MPa and 4.9%, respectively. It was also revealed that EMS improves mechanical properties by reduction in porosity and an increase in maximum pore ratio.

36 MATERIALS SCIENCE↗

Enhanced Hot Tensile Ductility of Mg-3Al-1Zn Alloy Thin-Walled Tubes Processed Via a Combined Severe Plastic Deformation

In the current study, combined parallel tubular channel angular pressing (PTCAP) and tube backward extrusion (TBE), as a recently developed severe plastic deformation (SPD) method, were applied at 300 °C on a commercial Mg-3Al-1Zn alloy tubes to achieve an ultrafine grained structure. Then, the microstructure, hardness, tensile properties, and fractography evaluations were done at room temperature on the SPD-processed samples. Also, to study the hot tensile ductility of the SPD-processed samples, tensile testing was performed at an elevated temperature of 400 °C, and then, the fractured surface of the tensile samples was studied. It was observed that a bimodal microstructure, with large gains surrounded by many tiny ones, was created in the sample processed by PTCAP followed by TBE. This microstructure led to reach higher hardness and higher strength at room temperature and also led to reach very high elongation to failure (~ 181%) at 400 °C. Also, the value of elongation to failure for this sample was ~ 14.1% at room temperature. The fractographic SEM images showed the occurrence of predominately ductile fracture in the samples pulled at 400 °C. This was mostly due to the nucleation of microvoids and their subsequent growth and coalescence with each other.

36 MATERIALS SCIENCE↗