Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “contour estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Helmet mounted display flight symbology research

Screen/head stabilized MIL-STD 1295 helmet mounted display (HMD) flight symbology as integrated on the Apache helicopter was compared to world referenced/stabilized flight symbology. Simulation test results indicate that pilots perform significantly better using world-stabilized conformal attitude symbology. They were accurate to an average of 1/2 degree at estimating terrain relief and aerial target locations. World stabilized conformal symbology was preferred while performing contour flight tasks. They reported that the use of climb-dive-marker during contour flight greatly reduced pilot work load under conditions tested. Cyclic input errors occurred when using both 1295 hover symbology and test symbology indicating that a better approach for depicting hover symbology is warranted. The magnitude of cyclic input and spatial estimation errors increased as the off-axis viewing angle became larger.

Haworth, Loran A.↗

A global atlas of GEOS-3 significant waveheight data and comparison of the data with national buoy data

The accuracy of the GEOS-3 significant waveheight estimates compared with buoy measurements of significant waveheight were determined. A global atlas of the GEOS-3 significant waveheight estimates gathered is presented. The GEOS-3 significant waveheight estimation algorithm is derived by analyzing the return waveform characteristics of the altimeter. Convergence considerations are examined, the rationale for a smoothing technique is presented and the convergence characteristics of the smoothed estimate are discussed. The GEOS-3 data are selected for comparison with buoy measurements. The GEOS-3 significant waveheight estimates are assembled in the form of a global atlas of contour maps. Both high and low sea state contour maps are presented, and the data are displayed both by seasons and for the entire duration of the GEOS-3 mission.

Mcmillan, J. D.↗

Pressure Drag of Axisymmetric Cowls Having Large Initial Lip Angles at Mach Numbers from 1.90 to 4.90

The results of experimental and theoretical data on nine cowls are presented to determine the effect of initial lip angle and projected frontal area on the cowl pressure drag coefficient at Mach numbers from 1.90 to 4.90. The experimental drag coefficients were approximated well with two-dimensional shock-expansion theory at the lower cowl-projected areas, but the difference between theory and experiment increased as the cowl area ratio was increased or as shock detachment at the cowl lips was approached. An empirical chart is presented, which can be used to estimate the cowl pressure drag coefficient of cowls approaching an elliptic contour.

Samanich, Nick E.↗

Determination of a Limited Scope Network's Lightning Detection Efficiency

This paper outlines a modeling technique to map lightning detection efficiency variations over a region surveyed by a sparse array of ground based detectors. A reliable flash peak current distribution (PCD) for the region serves as the technique's base. This distribution is recast as an event probability distribution function. The technique then uses the PCD together with information regarding: site signal detection thresholds, type of solution algorithm used, and range attenuation; to formulate the probability that a flash at a specified location will yield a solution. Applying this technique to the full region produces detection efficiency contour maps specific to the parameters employed. These contours facilitate a comparative analysis of each parameter's effect on the network's detection efficiency. In an alternate application, this modeling technique gives an estimate of the number, strength, and distribution of events going undetected. This approach leads to a variety of event density contour maps. This application is also illustrated. The technique's base PCD can be empirical or analytical. A process for formulating an empirical PCD specific to the region and network being studied is presented. A new method for producing an analytical representation of the empirical PCD is also introduced.

Rompala, John T.↗

Estimating Everglades Peat Reserves and Losses on a Landscape-Scale

The Florida Everglades formed from sawgrass and other aquatic plant remains that have accumulated over thousands of years and is a patterned peatland. The region was initially drained for agricultural and urban development in the late 1800s by the lowering of Lake Okeechobee water levels through canal drainage. Over the course of the past century, the Everglades has further been altered by the construction of canals and levees to provide control of Lake Okeechobee and Everglades water levels. The drainage has caused the loss of much of the peat of the Everglades by peat fires and microbial oxidation, much of it occurring between the 1880s and the 1950s. Plans for Everglades restoration are designed to provide additional water to flow through the remaining Everglades. Additional water into the Everglades would prevent further peat loss by reducing oxidation and encouraging the accretion of peat that has been lost. This potentially could result in the sequestration of significant quantities of atmospheric carbon. We used historic records to determine how much peat was there originally and how much has been lost. Over the past century and a half, approximately 50% of the original Everglades has been lost to agricultural and urban development. In addition, much of the peat in the remaining Everglades Protection Area has been lost. We used Geographic Information Systems technologies to determine the volume and mass of peat, the mass of carbon for each of the predrainage landscapes as well as the current Everglades regions. To do this, historical and current surveys within the Everglades were used to create elevation maps. With these maps, along with a bedrock contour map of south Florida, and soils data from the USEPA, we estimated Everglades peat characteristics. These calculations provide rough, quantitative estimates of the historical Everglades, its current condition, and the changes in the peat soil that have taken place since the 19th century. Given the uncertainties in the hindcasting of some of these data sets, this analysis provides rough estimates for the peat volumes and related constituents. Our calculations indicate that the current Everglades roughly contains less than 24% of theoriginal peat volume, 17% of its mass and 19% of its carbon. The work described was fully supported by the South Florida Water Management District, West Palm Beach, FL

Thomas Walter Dreschel↗

Spatial and Temporal Extrapolation of Disdrometer Size Distributions Based on a Lagrangian Trajectory Model of Falling Rain

Methodologies to improve disdrometer processing, loosely based on mathematical techniques common to the field of particle flow and fluid mechanics, are examined and tested. The inclusion of advection and vertical wind field estimates appear to produce significantly improved results in a Lagrangian hydrometeor trajectory model, in spite of very strict assumptions of noninteracting hydrometeors, constant vertical air velocity, and time independent advection during the scan time interval. Wind field data can be extracted from each radar elevation scan by plotting and analyzing reflectivity contours over the disdrometer site and by collecting the radar radial velocity data to obtain estimates of advection. Specific regions of disdrometer spectra (drop size versus time) often exhibit strong gravitational sorting signatures, from which estimates of vertical velocity can be extracted. These independent wind field estimates become inputs and initial conditions to the Lagrangian trajectory simulation of falling hydrometeors.

Lane, John E.↗

Nationwide assessment of potential output from wind-powered generators

A method for computing the actual expected power for a wind-powered generator from a given observed speed distribution is described and applied to estimate the potential output for different locations in the continental U.S. A contour map of generator capacity factor values (fraction of the rated output realizable) is obtained for wind-powered generator systems with a cut-in speed of 3.6 m/sec and a rated speed of 8.0 m/sec, and for a unit with hypothetical values for the 1 MW class (cut-in speed, 6.7 m/sec; rated speed, 13.4 m/sec). Results indicate that in the central U.S. and in certain areas of the New England coast at a height of 61 m, over 60% of the rated output power could be obtained on an annual average. In these areas capacity factors of over 20% could be obtained with the 1MW system.

Justus, C. G.↗

Research in interactive scene analysis

The recovery of information about the three dimensional structure and physical characteristics of surfaces depicted in an image was studied focusing on two complementary problems: (1) basic techniques for inferring three dimensional surface shape from two dimensional images and (2) means for integrating the results of different techniques to obtain a globally consistent surface description. A technique was developed for constraining surface orientation along image contours that correspond to surface boundaries. A means for interpolating surface orientation estimates from a variety of sources into smooth surfaces--a major integration problem--was also developed. A computational model, based on these techniques, was proposed for inferring the three dimensional surface structure depicted in a line drawing.

Tenenbaum, J. M.↗

Stereographic observations from geosynchronous satellites - An important new tool for the atmospheric sciences

Observations of cloud geometry using scan-synchronized stereo geostationary satellites having images with horizontal spatial resolution of approximately 0.5 km, and temporal resolution of up to 3 min are presented. The stereo does not require a cloud with known emissivity to be in equilibrium with an atmosphere with a known vertical temperature profile. It is shown that absolute accuracies of about 0.5 km are possible. Qualitative and quantitative representations of atmospheric dynamics were shown by remapping, display, and stereo image analysis on an interactive computer/imaging system. Applications of stereo observations include: (1) cloud top height contours of severe thunderstorms and hurricanes, (2) cloud top and base height estimates for cloud-wind height assignment, (3) cloud growth measurements for severe thunderstorm over-shooting towers, (4) atmospheric temperature from stereo heights and infrared cloud top temperatures, and (5) cloud emissivity estimation. Recommendations are given for future improvements in stereo observations, including a third GOES satellite, operational scan synchronization of all GOES satellites and better resolution sensors.

Hasler, A. F.↗

Quantifying VOC-Reaction Tracers, Ozone Production, and Continuing Aerosol Production Rates in Urban and Far-Downwind Atmospheres

We have found a surprisingly informative decomposition of the complex question of smoggy ozone production (basically, [HO2] in a more locally determined field of [NO]) in the process of linked investigations of modestly smoggy Eastern North America (by NASA aircraft, July 2004) and rather polluted Flushing, NYC (Queens College, July, 2001). In both rural and very polluted situations, we find that a simple contour graph parameterization of the local principal ozone production rate can be estimated using only the variables [NO] and j(sub rads) [HCHO]: Po(O3) = c (j(sub rads) [HCHO])(sup a) [HCHO](sup b). Here j(sub rads) is the photolysis of HCHO to radicals, presumably capturing many harder-UV photolytic processes and the principle ozone production is that due to HO2; mechanisms suggest that ozone production due to RO2 is closely correlated, often suggesting a limited range of different proportionality factors. The method immediately suggests a local interpretation for concepts of VOC limitation and NOx limitation. We believe that the product j(sub rads) [HCHO] guages the oxidation rate of observed VOC mixtures in a way that also provides [HO2] useful for the principle ozone production rate k [HO2] [NO], and indeed, all ozone chemical production. The success of the method suggests that dominant urban primary-HCHO sources may transition to secondary plume-HCHO sources in a convenient way. Are there other, simple, near-terminal oxidized VOC's which help guage ozone production and aerosol particle formation? Regarding particles, we report on, to the extent NASA Research resources allow, on appealing relationships between far-downwind (Atlantic PBL) HCHO and very fine aerosol (including sulfate. Since j(sub rads) [HCHO] provides a time-scale, we may understand distant-plume particle production in a more quantitative manner. Additionally we report on a statistical search in the nearer field for relationships between glyoxals (important near-terminal aromatic and isoprene reaction products) and aerosol production, looking for VOC's that might be most implicated. All three variables j(sub rads), [HCHO], and [NO] are relatively easily measured in widespread air pollution monitoring networks, and all are deducible form space-borne observations, though estimation of [NO] from [NO2] (the species observable from space) may require care. We report also on airborne and surface observations of HCHO, suggesting that concentrated (urban) and more diffuse (forest) sources may be distinguishable from space. The use of the 3.58 micron microwindow for HCHO remote sensing should allow much sharper resolution of HCHO than the UV. UV sensing requires large and expensive instruments, but even these seem justified since formaldehyde is so informative.

Chatfield, Robert↗

Crack Turning and Arrest Mechanisms for Integral Structure

In the course of several years of research efforts to predict crack turning and flapping in aircraft fuselage structures and other problems related to crack turning, the 2nd order maximum tangential stress theory has been identified as the theory most capable of predicting the observed test results. This theory requires knowledge of a material specific characteristic length, and also a computation of the stress intensity factors and the T-stress, or second order term in the asymptotic stress field in the vicinity of the crack tip. A characteristic length, r(sub c), is proposed for ductile materials pertaining to the onset of plastic instability, as opposed to the void spacing theories espoused by previous investigators. For the plane stress case, an approximate estimate of r(sub c), is obtained from the asymptotic field for strain hardening materials given by Hutchinson, Rice and Rosengren (HRR). A previous study using of high order finite element methods to calculate T-stresses by contour integrals resulted in extremely high accuracy values obtained for selected test specimen geometries, and a theoretical error estimation parameter was defined. In the present study, it is shown that a large portion of the error in finite element computations of both K and T are systematic, and can be corrected after the initial solution if the finite element implementation utilizes a similar crack tip discretization scheme for all problems. This scheme is applied for two-dimensional problems to a both a p-version finite element code, showing that sufficiently accurate values of both K(sub I) and T can be obtained with fairly low order elements if correction is used. T-stress correction coefficients are also developed for the singular crack tip rosette utilized in the adaptive mesh finite element code FRANC2D, and shown to reduce the error in the computed T-stress significantly. Stress intensity factor correction was not attempted for FRANC2D because it employs a highly accurate quarter-point scheme to obtain stress intensity factors.

Pettit, Richard↗

The JPL Neptune Radiation Model (NMOD)

The objective of this study is the development of a comprehensive radiation model of the Neptunian environment for JPL mission planning. The ultimate goal is to provide a description of the high-energy electron and proton environments and the magnetic field at Neptune that can be used for engineering design. The JPL Neptune Radiation Model (NMOD) models the high-energy electrons and protons between 0.025 MeV and 5 MeV based on the California Institute of Technology's Cosmic Ray Subsystem and the Applied Physics Laboratory's Low Energy Charged Particle Detector on Voyager 2. As in previous JPL radiation models, the form of the Neptunian model is based on magnetic field coordinates and requires a conversion from spacecraft coordinates to Neptunian-centered magnetic "B-L" coordinates. Two types of magnetic field models have been developed for Neptune: 1) simple "offset, tilted dipoles" (OTD), and 2) a complex, multi-pole expansion model ("O8"). A review of the existing data on Neptune and a search of the NASA Planetary Data System (PDS) were completed to obtain the most current descriptions of the Neptunian high-energy particle environment. These data were fit in terms of the O8 B-L coordinates to develop the electron and proton flux models. The flux predictions of the new model were used to estimate the total ionizing dose (TID) rate along the Neptunian equator, meridional flux contours for the electrons and protons, and for flux and dose comparisons with the other radiation belts in the Solar System.

Garrett, Henry↗

The JPL Neptune Radiation Model (NMOD)

The objective of this study is the development of a comprehensive radiation model of the Neptunian environment for JPL mission planning. The ultimate goal is to provide a description of the high-energy electron and proton environments and the magnetic field at Neptune that can be used for engineering design. The JPL Neptune Radiation Model (NMOD) models the high-energy electrons and protons between 0.025 MeV and 5 MeV based on the California Institute of Technology's Cosmic Ray Subsystem and the Applied Physics Laboratory's Low Energy Charged Particle Detector on Voyager 2. As in previous JPL radiation models, the form of the Neptunian model is based on magnetic field coordinates and requires a conversion from spacecraft coordinates to Neptunian-centered magnetic "B-L" coordinates. Two types of magnetic field models have been developed for Neptune: 1) simple "offset, tilted dipoles" (OTD), and 2) a complex, multi-pole expansion model ("O8"). A review of the existing data on Neptune and a search of the NASA Planetary Data System (PDS) were completed to obtain the most current descriptions of the Neptunian high-energy particle environment. These data were fit in terms of the O8 B-L coordinates to develop the electron and proton flux models. The flux predictions of the new model were used to estimate the total ionizing dose (TID) rate along the Neptunian equator, meridional flux contours for the electrons and protons, and for flux and dose comparisons with the other radiation belts in the Solar System.

magnetic field↗

Analysis and prediction of ocean swell using instrumented buoys

During the period 20-23 September 1990, the remnants of Supertyphoon Flo moved into the central North Pacific Ocean with sustained wind speeds of 28 m/s. The strong wind and large fetch area associated with this storm generated long-period swell that propagated to the west coast of North America. National Data Buoy Center moored-buoy stations, located in a network that ranged from the Gulf of Alaska to the California Bight, provided wave spectral estimates of the swell from this storm. The greatest dominant wave periods measured were approximately 20-25 s, and significant wave heights measured ranged from 3 to 8 m. Wave spectra from an array of three nondirectional buoys are used to find the source of the long-period swell. Directional wave spectra from a heave-pitch-roll buoy are also used to make an independent estimate of the source of the swell. The ridge-line method, using time-frequency contour plots of wave spectral energy density, is used to determine the time of swell generation, which is used with the appropriate surface pressure analysis to infer the swell generation area. The diagnosed sources of the swell are also compared with nowcasts from the Global Spectral Ocean Wave Model of the Fleet Numerical Oceanography Center. A simple method of predicting the propagation of ocean swell, by applying a simple kinematic model of wave propagation to the estimated point and time source, is demonstrated.

Mettlach, Theodore↗

Analysis of ALOPE data from Superflux

Remote sensing data collected with the airborne lidar oceanographic probing experiment (ALOPE) laser fluorosensor during the Superflux 1 and Superflux 2 experiments were analyzed using two techniques. A qualitative technique which requires no supplementary data provided a near-real-time estimate of relative abundance of the golden-brown and green phytoplankton color groups. Contour plots developed for the later mission are used to demonstrate the utility of this technique. A quantitative technique which requires supplementary data to define the attenuation coefficient provides chlorophyll a concentration by color group. The sum of the golden-brown and green chlorophyll a data yields total chlorophyll a values which may be compared with in situ data. As expected, the golden-brown population was dominant in the Chesapeake Bay and the Bay plume whereas the green population was dominant in shelf waters.

Jarrett, O., Jr.↗

Chronology, eruption duration, and atmospheric contribution of Apollinaris Patera, Mars

Geologic mapping from Viking image data of the Martian volcano Apollinaris Patera allowed identification of 6 major events that shaped its current morphology. Derivation of new topographic data allowed accurate estimates of the volume of erupted products from which estimates of an eruption duration are presented for the edifice and its corresponding atmospheric water contribution. Topographic data were acquired using stereophotogrammetric (Viking picnos 603A42, 639A92) techniques in both profiling and contouring modes (1 km contour). The profiling mode results in a more precise measurement than the contouring mode, but is limited in its areal coverage. The contour data are used in a more general sense to provide synoptic coverage for the volcano. These new stereophotogrammetric measurements constrain the topography to an accuracy of approximately 800 m vertically and approximately 1000 m horizontally. Conversion of the derived contour map to a raster based digital elevation model (DEM) was done by a growing contours interpolation. An ambiguity arises in this volume calculation due to an uncertainty regarding the actual base of the volcano relative to the pre-existing topography. Thus, the volume estimate was bracketed by using the 100 m and the 750 m elevations, which generally correspond to the lower and upper portions of the circumferential basal scarp, respectively. The resulting volumes are 103,000 cu km and 97,000 cu km; therefore the total volume of Apollinaris Patera is estimated to be approximately 100,000 cu km.

Robinson, M. S.↗

Electron heating of inflowing interstellar gas

The heating of inflowing interstellar gas by solar electrons is calculated. In the present work it is assumed that the thermal energy of the electrons is constant with distance from the Sun and that the inflowing gas follows Keplerian trajectories, and the contours of constant temperature so obtained are given. At a heliocentric distance of 1 AU the estimated temperature is 500 K upwind and 2000 K downwind for hydrogen atoms, and is 240 K downwind and 100 K upwind for helium.

Wu, F.-M.↗

Estimating Wall-Induced Velocities in Wind Tunnels

Estimates of wall effects in two-dimensional wind tunnel obtained using upwash measurements on two contours near test model. Method derived from combination of prior techniques that correct for wall effects. Improved method limited to flows described by linear equations. Method accurately predicted wall-induced velocities along centerline of theoretical wind tunnel and confirmed that wall adjustments substantially reduced wall interference.

Schairer, E. T.↗