Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “co-location”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Large Load Impacts to Distribution System Hosting Capacity

This work examined the impact of large loads on utility distribution system models using the Sandia-developed open-source software DREAMS. It was shown that hosting capacity varies with location and changes after any asset is added to, or removed from, a system. Despite the tested models having similar rated voltages and other characteristics, their thermal and voltage constrained hosting capacity varied over 2 MW. The addition of a 3-phase balanced constant power large load with power factor of 1.0 exhibited non-linear reductions to all voltage constrained hosting capacities. The reductions to thermal constrained hosting capacity from a load with similar characteristics was more linear, related to the size of the added load, and did not impact all model buses. Co-located capacitors were shown to accommodate demand that was beyond the baseline voltage constrained hosting capacity limits, however, the costs and benefits from this approach were found to not be 1:1 and required additional available thermal capacity.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2026

Seismic velocity modeling and earthquake relocations for the southern Nevada National Security Site (NNSS), with a focus on Rock Valley

The Rock Valley Direct Comparison (RV/DC) is the third phase of the Source Physics Experiment (SPE; Snelson et al., 2014), a project aimed at improving seismic discrimination between explosive sources and natural earthquakes. Phases I and II of SPE focused on studying the generation of shear waves in endmember geologies (granite and alluvium, respectively), while Phase III aims to detonate a chemical explosion co-located with the source region of the 1993 Rock Valley earthquake sequence, located in the Rock Valley Fault Zone (RVFZ), in the southern portion of the Nevada Test Site (now the Nevada National Security Site, or NNSS).

58 GEOSCIENCES↗
DOE OSTI2025

WREF Field Profiling Lidar-773 / Raw Data

The field profiling lidar #ZX300-773 was deployed on the ground in an open field 880 m south of the Wind River NEON tower in summer 2025. It was co-located with LLNL's Halo XR+ scanning lidar (z05) and Argonne's Waggle Node to capture mountain-valley flows during the warm summer season. The zip files contain high frequency data. The excel files are 10-min averages.

17 WIND ENERGY↗
DOE OSTI2026

FC Site 4.0 - NLR Thermodynamic profiler (ASSIST II-11) Thermodynamic Retrievals TROPoe

This dataset contains daily files with thermodynamic profiles retrieved with the optimal estimation physical retrieval TROPoe v0.19 (Turner and Löhnert 2014; Turner and Blumberg 2019; Turner and Löhnert 2021). The profiles are retrieved every 10 minutes from instantaneous observations from the NLR ASSIST II infrared spectrometer. Observations are noise-filtered but not averaged in time to minimize errors due to non-uniform clouds. Additional input data in TROPoe are cloud base height (CBH) from co-located scanning lidar. The full pipeline for running the retrieval is available at https://github.com/StefanoWind/TROPoe_processor. Met data was not ingested. In addition to these temporally resolved input data, TROPoe requires an a priori dataset (prior) that provides mean climatological estimates of thermodynamic profiles and specifies how temperature and humidity covary with height as an input (for details see, e.g., Djalalova et al. 2022). The prior is a key component of the retrieval and provides a constraint on the ill-posed inversion problem. A monthly prior was computed from operational radiosonde launches in Denver, CO.

17 WIND ENERGY↗
DOE OSTI2025

Multiscale ACI Satellite Database

The SATELLITE_EAGLES_PNNL NetCDF dataset contains a suite of satellite- and reanalysis-derived atmospheric and surface parameters on a regular latitude–longitude grid. The dataset includes core geophysical fields such as land fraction, aerosol optical depth at multiple wavelengths (465, 550, 667, and 865 nm), sea surface temperature, estimated inversion strength, and various thermodynamic and dynamic quantities (e.g., relative humidity, vertical velocity, boundary-layer height, and surface fluxes) from both MERRA and ERA reanalysis products, provided as daily-mean and instantaneous values. A major component of the dataset consists of MODIS-retrieved cloud microphysical properties, including cloud droplet number concentration, cloud effective radius, optical thickness, and liquid water path, provided for three compositing regimes (“All,” “Q06,” and “G18”). Corresponding cloud-top parameters—temperature, height, and pressure—along with total and domain-mean cloud fraction fields are also included. The file further integrates additional satellite data from AMSR-E (for cloud water, rain water, and surface precipitation retrievals) and CERES (for top-of-atmosphere radiative fluxes, cloud fractions, and albedo). This dataset is designed to evaluate aerosol–cloud interactions in warm clouds, emphasizing the use of MODIS for deriving cloud droplet number concentration and liquid water path statistics. The complementary satellite and reanalysis fields are co-located and time-matched to the same instantaneous MODIS observations, enabling consistent comparisons between cloud properties, aerosol loading, and large-scale meteorological conditions. The dataset is recently featured in Christensen et al. (2025), Machine Learning Reveals Strong Grid-Scale Dependence in the Satellite Nd–LWP Relationship, EGUsphere [preprint], https://doi.org/10.5194/egusphere-2025-3850, 2025.

Christensen, Matthew [Pacific Northwest National L↗
DOE OSTI2025

Multiscale ACI Satellite Database

The SATELLITE_EAGLES_PNNL NetCDF dataset contains a suite of satellite- and reanalysis-derived atmospheric and surface parameters on a regular latitude–longitude grid. The dataset includes core geophysical fields such as land fraction, aerosol optical depth at multiple wavelengths (465, 550, 667, and 865 nm), sea surface temperature, estimated inversion strength, and various thermodynamic and dynamic quantities (e.g., relative humidity, vertical velocity, boundary-layer height, and surface fluxes) from both MERRA and ERA reanalysis products, provided as daily-mean and instantaneous values. A major component of the dataset consists of MODIS-retrieved cloud microphysical properties, including cloud droplet number concentration, cloud effective radius, optical thickness, and liquid water path, provided for three compositing regimes (“All,” “Q06,” and “G18”). Corresponding cloud-top parameters—temperature, height, and pressure—along with total and domain-mean cloud fraction fields are also included. The file further integrates additional satellite data from AMSR-E (for cloud water, rain water, and surface precipitation retrievals) and CERES (for top-of-atmosphere radiative fluxes, cloud fractions, and albedo). This dataset is designed to evaluate aerosol–cloud interactions in warm clouds, emphasizing the use of MODIS for deriving cloud droplet number concentration and liquid water path statistics. The complementary satellite and reanalysis fields are co-located and time-matched to the same instantaneous MODIS observations, enabling consistent comparisons between cloud properties, aerosol loading, and large-scale meteorological conditions. The dataset is recently featured in Christensen et al. (2025), Machine Learning Reveals Strong Grid-Scale Dependence in the Satellite Nd–LWP Relationship, EGUsphere [preprint], https://doi.org/10.5194/egusphere-2025-3850, 2025.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

U.S. Agrivoltaics Irradiance Database

This is a foundational data set for research and deployment of agrivoltaics, which is the co-location of agriculture and solar power plants on the same land. This irradiance and shading dataset can be utilized to determine the suitability of agrivoltaics configurations for a given region and crop-type. The data is hourly, 4x4 km resolution across the contiguous United States and Hawaii. It is calculated from the National Solar Radiation Database sites, using the System Advisor Model (SAM) to simulate the shading patterns for 10 common agrivoltaics configurations. Sunlight availability data is reported for 10 locations on the ground between adjacent rows of solar panels, as well as averaged across areas of interest such as the average irradiance in the edge-to-edge open area or across 3-6 planting beds. Other available metrics include the input meteorological data from the NSRDB (e.g. global horizontal irradiance, wind speed, etc.) and estimates for comparing energy and agricultural characteristic across the 10 configurations, including power output per acre or per kW installed capacity and farmable land area per acre.

14 SOLAR ENERGY↗
DOE OSTI2026

Chemical ionization mass spectrometry utilizing benzene cations for measurements of volatile organic compounds and nitric oxide

We evaluate the capability of chemical ionization mass spectrometry (CIMS) using benzene cations as reagent ions (benzene CIMS) for detecting atmospheric trace gases. We characterize the ionization pathways and product ion distributions for 27 analytes spanning diverse chemical classes. To interpret the complex ion chemistry involving two reagent ions (C 6 H$^{+}_{6}$ and (C 6 H 6 )$^{+}_{2}$) and multiple ionization pathways (charge transfer, proton transfer, adduct formation, and hydride abstraction), we introduce a thermodynamics-based framework that classifies analytes into three categories based on their ionization energy (IE), relative to those of benzene monomer (9.24 eV) and dimer (8.69 eV). Each class exhibits distinct ionization mechanisms and product ions. Analytes with IE smaller than 8.69 eV (low IE) undergo charge transfer with both reagent ions; analytes with IE between 8.69 and 9.24 eV (mid IE) undergo charge transfer with C 6 H$^{+}_{6}$ and potential adduct formation with (C 6 H 6 )$^{+}_{2}$; analytes with IE larger than 9.24 eV (high IE) could undergo adduct formation, proton transfer, or hydride abstraction. Analytes within each class also show similar sensitivity, enabling sensitivity estimation for compounds lacking calibration standards. In addition to volatile organic compounds (VOCs), benzene CIMS detects nitric oxide (NO) with a detection limit of 5 pptv for 1 min integration time, exceeding the performance of most commercial NOx analyzers. Field deployments in Chicago and St. Louis demonstrate good agreement with reference NO measurements. Isoprene measurements show good agreement with a co-located gas chromatography–photoionization detector (GC-PID) in St. Louis, but exhibit substantial positive bias in Chicago, likely due to interferences from anthropogenic VOCs in the polluted urban environment. These results highlight the potential of benzene CIMS for concurrent measurements of NO, VOCs, and their oxidation products using a single instrument, while also underscoring challenges in complex atmospheric conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

A Novel Segmentation Algorithm for the ARM User Facility All-Sky Imagers Using Machine Learning Applications

Cloud cover plays a pivotal role in modulating the Earth's energy budget through the reflection of incoming solar radiation and the trapping of outgoing longwave radiation. Ground-based all-sky imagers offer an objective assessment of cloud cover that can be used to estimate solar irradiance, classify cloud types, track cloud movement, and serve as a benchmark 10 for the evaluation of satellite and reanalysis data products. The Atmospheric Radiation Measurement (ARM) user facility has utilized all-sky imagers for more than 25 years to monitor cloud cover and augment its comprehensive suite of atmospheric measurements. Following the retirement of its Total Sky Imager (TSI), ARM recently deployed the TSI’s successor, the All Sky Imager (ASI-16 camera systems). To provide a smooth transition and continuity to the vast amount of knowledge gathered by the TSI over the years, while addressing typical deployment issues, we developed a novel pixel segmentation algorithm, 15 the ASI Sky Cover (ASISKYCOVER). ASISKYCOVER builds on the different strengths and properties of the TSI processing algorithm while integrating machine learning techniques, ensuring data validity and accuracy across diverse atmospheric conditions. It enhances cloud cover characterization with new features such as artifact detection and uncertainty quantification. ASISKYCOVER also includes cloud cover estimates for near-zenith (narrow field-of-view) and reduces susceptibility to false detections. This study introduces ASISKYCOVER, details its algorithm framework, and demonstrates its capabilities using a 20 year-long dataset from the ARM Southern Great Plains site. Comparisons with co-located TSI data and other ARM measurements, such as zenith-pointing radars and lidars, are presented, underscoring the ASISKYCOVER’s potential to improve cloud cover analyses and data evaluation efforts, as well as to be integrated into higher-level data products that synergize instrument suites to generate new and insightful information

Silber, Israel↗
DOE OSTI2025

Vertical column dual-comb spectroscopy to a TBS

Open-path dual-frequency-comb spectroscopy (DCS) is a broadband, high spectral resolution, and high precision method for measuring gas concentrations over kilometer-scale paths. It has been used for detection and quantification of emissions of pollutants, hazardous gasses, and greenhouse gasses (GHGs). DCS has been shown to measure trace-gas mixing ratios with 0.14%-0.4% agreement between instruments. To achieve high signal-to-noise ratios (SNRs) with DCS, comb light is targeted onto a retroreflector at the end of the measurement path, which returns the signal to a detector co-located with the launch signal. Installing the retroreflector on a mobile platform such as a balloon or unmanned aerial vehicle (UAV) extends the capabilities of DCS by enabling variable path lengths, greater mobility, and access to higher altitudes. Mobile-target DCS has many uses in plume and leak detection, emissions modeling, and planetary boundary layer (PBL) studies. It is a promising method for observing vertical distributions of GHGs and mixing processes in the PBL, which are difficult to measure but important for pollution and climate monitoring as well as for understanding transport of gasses through the atmosphere. Tethered balloons are an intriguing platform because they enable longer flight durations and higher altitudes than easily obtainable with a UAV and thus allow for column measurements up to and above the PBL. New measurements completed in October/November 2024 reach the highest altitudes above ground level yet achieved by mobile-target DCS. For these measurements, the retroreflector was mounted on a 7 m diameter tethered helium balloon. An actively tracking gimbal on the ground holds the DCS launch telescope and keeps the 5 cm beam pointed onto the retroreflector while the balloon is lifted, lowered, and moved by wind and turbulence.

atmosphere↗
DOE OSTI2025

Snow ALbedo eVOlution (SALVO) Campaign Qualitative Characterization of Snowpack Stratigraphy from April - June, 2024 in Utqiagivk, AK

The physical structure of the snowpack is impacted by and impacts the exchange of energy with the atmosphere. Qualitative characterization of snowpack stratigraphy in snow pits provides context for what physical processes are changing the snow (e.g., melt, wind-packing, hoar formation). 36 snowpits were dug as part of the 2024 Snow Albedo Evolution (SALVO) field campaign. Snow grain stratigraphy was recorded using standard International Association of Cryospheric Sciences (IACS) snow grain classification ( https://cryosphericsciences.org/publications/snow-classification/) and hand hardness tests (in order of least hard to hardest: F (fist), 4F (four fingers), 1F (one finger), P (pencil), K (knife), I (ice)). These snowpits were generally co-located with library site albedo measurements and are given the same index (Date, Site, Location, Position) when appropriate (see broadband and spectral albedo data archived from the SALVO II project).

Depth to bottom of snow layer↗
DOE OSTI2026

The Zooplankton International Geospatial (ZIG) dataset: A global repository of spatiotemporal freshwater zooplankton community composition data to support ecological research

Zooplankton play critical roles in aquatic ecosystem function and food webs. Nevertheless, global syntheses of their abundance and community dynamics are challenging due to methodological differences across monitoring programs, taxonomic inconsistencies, and a lack of standardized metadata. To reconcile these challenges, we assembled, curated, validated, and harmonized the Zooplankton International Geospatial (ZIG) dataset, which includes co-located and contemporaneous zooplankton, water chemistry, and limnological data from 307 lakes and reservoirs. ZIG includes waterbodies from each major lake thermal region and range in size from 0.8-2,805,8600 hectares. Temporal coverage for individual waterbodies ranges between 1-60 years of data (median = 4 years) with sampling from once annually to weekly. ZIG is publicly available and can be used to understand freshwater biodiversity change and its drivers at unprecedented scales, and we consider it to be a cornerstone for future investigations of freshwater biology, chemistry, and ecology.

Figary, Stephanie [Cornell University, Ithaca, NY]↗
DOE OSTI2026

SuperLab 2.0 Showcase: Connecting Five Labs to Tackle Grid Complexity and Unlock Unique Grid Asset Potential

SuperLab 2.0 (5-Lab Demo) is a collaborative, national-scale experiment showcasing the coordination of geographically distributed energy assets in real time. The demonstration integrates 25 physical and digital assets, spanning wind, PV, batteries, electrolyzers, DC fast chargers, microgrid controllers, building automation systems, small modular reactor (SMR), control centers, and gas turbines, across five DOE national laboratories-NLR, INL, NETL, LBNL, and SNL. These assets are unified using Energy Sciences Network (ESnet), a low-latency, high-performance U.S. Department of Energy's (DOE) network, and controlled via a centralized energy controller hosted at NLR's ARIES facility. The demonstration validates the ability to stress-test hybrid energy systems under dynamic scenarios to de-risk advanced control strategies for greater resilience and flexibility. SuperLab 2.0 (5-Lab Demo) showcased a major advancement in federated national laboratory collaboration, enabling real-time, cross-laboratory experimentation to coordinate geographically dispersed distributed energy resources (DERs) using various communication protocols and networks. SuperLab 2.0 (5-Lab Demo) built on previous demonstrations conducted between NLR-PNNL and NLR-INL connecting diverse assets including distant protection devices, a SMR simulator, and a high temperature electrolyzer (HTE). Previous demos were based on a single connection between two labs with minimal coordination challenges. The 5-Lab demo with a centralized controller, distributed testbeds across different geographical locations, and use of protocols-based communication represents a scenario closer to real-world grid operations that coordinate resources across a region to meet system needs. This experiment studied how local DER controllers interact with a centralized energy controller during normal and abnormal events to maintain reliability. The SuperLab team across the five labs implemented a notional power system model equivalent of transmission and distribution lines, represented by the data networks interconnecting the labs. Each lab continuously exchanged local parameters (such as P and Q) from its Hardware-In-Loop (CHIL) and Power Hardware-In-Loop (PHIL) assets through centralized energy controller at NLR, enabling real-time interaction and coordination across sites. By leveraging ESnet as the communication backbone, the team successfully operated the distributed assets as a unified power system, with each bus represented by a different laboratory. This setup mirrors how assets interact in real-world power systems across dispersed locations with various protocols and latencies. At each lab site, assets were operated using their own local controllers which were coordinated through an overarching operation and control layer of centralized energy controller, equivalent to how an energy management system (EMS) orchestrates assets across a regional or national grid. SuperLab's federated connectivity utilized a Digital Real-Time Simulators (DRTS)-type gateway to connect Controller Hardware-In-Loop (CHIL) and PHIL assets between labs. To enable this federated connection through ESnet, a deterministic network was established where latency variations were consistent. This consistency allowed the development of digital filters for the power system assets across CHIL and PHIL interfaces to avoid unstable and unreliable grid conditions. This report provides an overview of the cross-laboratory configuration and offers insights into interconnecting geographically distributed research assets to test them as if they were co-located. This experiment represents a step toward linking nine DOE national laboratories, enabling nation-wide simulations that can address utility-driven challenges with grid resilience, flexibility, and modernization.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2026

Outdoor Deployment Data for a Four-Terminal GaAs//Si Tandem Solar Mini-Module

This dataset contains the complete outdoor measurement and analysis data for a mechanically stacked, four-terminal (4T) gallium arsenide (GaAs)//silicon (Si) tandem solar mini-module deployed from October 2019 to January 2021 at the Solar Radiation Research Laboratory (SRRL) in Golden, Colorado, USA. The data support a performance modeling and degradation analysis framework for tandem photovoltaic devices, as described in the accompanying publication. The dataset includes: (1) current–voltage (J–V) characteristics of each sub-cell measured approximately every five minutes, with extracted performance parameters; (2) spectral irradiance from an EKO MS-710 WISER spectroradiometer, along with derived spectral mismatch ratios (SMR) and average photon energy (APE); (3) one-minute resolution meteorological data from the co-located SRRL weather station and GPS-derived precipitable water vapor (PWV); (4) pre-deployment laboratory characterization (external quantum efficiency, J–V curves, standard test conditions parameters); (5) outdoor-extracted temperature and PWV correction coefficients; and (6) PVcircuit equivalent-circuit simulation outputs used for model validation. Degradation rates of −4.1 ± 0.2 %/year (GaAs) and −2.5 ± 0.9 %/year (Si) were determined using a filtering and normalization methodology adapted for fixed-tilt tandem modules. All data are provided in open, portable formats (Apache Parquet, CSV, JSON) to enable full reproducibility of the published analysis.

14 SOLAR ENERGY↗
DOE OSTI2026

Pixel-Registered Multimodal Synchrotron XRF and FTIR Microscopies Reveal Salinity Stress Response Mechanisms in Pistachio

Background: Salinity is a major abiotic stress that negatively affects nearly all plant species at all stages of growth. Drought and poor-quality irrigation cause high soil salinity and salt accumulation via evaporation, reducing crop productivity. Despite its critical importance, the spatial localization of salt ions and associated biochemical changes within plants experiencing high salinity remains largely unknown. In this study, we developed a multimodal imaging pipeline to understand the impact of salinity on the pistachio rootstock UCB-1 (Pistacia atlantica x Pistacia integerrima). We directly link biochemical fingerprints in stem tissue architecture with salt ion localization to provide insights into the strategies pistachio uses to tolerate salinity. Results: We observed that Pistacia spp. exposed to high salt conditions accumulated Ca, Si, Cl, Al and Mg as hotspots within the pith, compared to the control (of which only Ca and Al co-locate). In contrast, there was a decrease in K between the control and salinity treatment. Hotspots of amide I and II were present in the cortex and pith of the salinity treated sample. Additionally, the salinity treatment resulted in an increased abundance of pectin and carbohydrates within the pith compared to the control, and the abundance of esters/carboxylic acid was greater in the salinity treatment. Conclusions: We determined that Cl and K, S and P, and biochemical components polysaccharide and pectin, esters and carboxylic acid, amide I and cellulose are the strongest drivers of salinity- treatment induced variability. In the cortex and phloem/xylem, a negative K-Ca correlation decreases in the salinity treatment. Several hotspots of elements and amide I (proteins) appear under salinity treatment, particularly in the cortex, suggesting an increase in the production of stress-related proteins (in response to high Cl) and/or structural proteins (i.e. Ca). Together, these results indicate that pistachio responds to salinity through ion compartmentalization coupled with a targeted biochemical adjustment, rather than a broadscale tissue-wide response. Overall, these novel, spatially resolved pixel-registered multimodal imaging data provide an enabling platform to understand the mechanisms of salinity tolerance in Pistacia spp and can be broadly applied to studying stress-related phenotype response in various plant tissues.

FTIR spectromicroscopy↗
DOE OSTI2026

Urban agrivoltaics enhance crop resilience and food-energy synergies in a changing climate

Urban agrivoltaics, the synergistic integration of solar photovoltaics with urban agriculture, offers a transformative solution to food and energy insecurity, which are major barriers to sustainable urban development, especially in low-income urban areas facing intensified heat and water stress due to climate change. With 70% of the global population projected to live in cities by 2050, maximizing underutilized urban spaces is critical. Our study presents the first evaluation of ground-based agrivoltaics in an urban context, demonstrating that, while early-season yields may decline due to light reduction in temperate climates, productivity rebounds during periods of extreme heat, extending harvest windows and enhancing crop resilience. As cities seek climate-adaptive infrastructure, converting just a fraction of vacant land and rooftops to urban agrivoltaics can yield significant co-benefits such as generating renewable energy for thousands of households while supplying fresh produce to help alleviate food deserts.

14 SOLAR ENERGY↗
DOE OSTI2025

Scientific frontiers of agrivoltaic cropping systems

Agrivoltaic (AV) systems integrate agriculture with electricity conversion through photovoltaic (PV) modules. Compared with conventional ground-mounted PV systems, AV systems can reduce land-use competition and offer agronomic and economic advantages, such as more stable crop production and additional farm income. However, AV systems can decrease agricultural performance and are typically 20-90% costlier to install than conventional PV systems. Here, in this Review, we analyse the implementation of AV cropping systems to preserve agricultural activities and highlight challenges and barriers. The global electricity potential of AV systems is ~66-385 PWh annually, depending on PV technology and installation density, if deployed in the most suitable areas, without accounting for grid availability. Scaling up has been hindered by crop selection for shading conditions, decreased energy conversion per unit of land area and issues with social acceptance, landscape impact and environmental sustainability. These issues can be addressed by developments such as wavelength-selective PV; system configurations, such as optimizing module spacing to reduce shading; and operational methods, such as optimizing tracking strategies and integrating agricultural infrastructure. Cross-sector policies can support AV systems by addressing the needs of diverse stakeholders over shared land resources. Further development will require collaboration among the design, performance, deployment and systems research communities.

14 SOLAR ENERGY↗