Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SSW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Integral Field Probe for Mapping of Curved Magnets

The Single Stretched Wire (SSW) method allows highly precise integral field measurements by recording voltage across a tensioned wire mounted to 2-axis linear stages at either end of the magnet aperture. However, traditional SSW probes are not well suited for curved accelerator magnets, which are essential for steering charged particles along arced trajectories in storage rings or beamlines. The tension required to eliminate sag demands a purely straight path, making them incompatible with non-linear magnet geometries. To address this limitation for curved magnets, a modified approach was developed using a segmented, 3D-printed support structure that incorporates a pre-shaped anti-sag curve. Under its own weight and that of the wire bundle, the structure deforms to lie flat while conforming to the curvature of the magnet in the horizontal plane. The optimal geometry of the probe was derived using an iterative process combining FEA simulations in Ansys Mechanical with testing of various carbon fiber-reinforced filaments. The printed and assembled probe was successfully used to measure the SDD-059 magnet at Fermilab, yielding promising results.

Jakopin, Alexander [Northern Illinois U.]↗

Metal-Catalyzed Thermo-Catalytic Decomposition and Continuous Catalyst Generation

In this study, metal dusting is utilized to initiate a two-stage thermo-catalytic decomposition (TCD) process. Stage 1 starts with metal-catalyzed TCD, and in stage 2 the metal-catalyzed carbon catalyzes additional TCD. TEM is presented of the early- versus late-stage TCD to qualitatively illustrate the second-stage TCD by the metal-catalyzed carbons. Corresponding SEM illustrates differences in growth type and surface density between early versus late reaction times, with backscattered imaging differentiating the first- versus second-stage TCD. TGA supports the microscopic inference of a second carbon phase by the presence of an early (low-temperature) reaction peak, characteristic of low-structure or disordered carbon as the second-stage TCD carbon. Raman analysis confirms that the second-stage carbon deposit is more disordered and unstructured, especially at 1000 °C, supported by the ID/IG and La value changes from 0.068 to 0.936 and 65 nm to 4.7 nm, respectively. To further confirm second-stage TCD occurrence upon pre-catalyzed carbons, two carbon blacks are tested. Exposing a combination of edge and basal or exclusively basal sites for the graphitized form, they afford a direct comparison of TCD carbon nanostructure dependence upon the initial carbon catalyst nanostructure. Pre-oxidation of the stainless-steel wool (SSW) prior to TCD is advantageous, accelerating TCD rates and increasing carbon yield relative to the nascent SSW for an equivalent reaction duration.

Chemistry↗

Solid-State Welding of the Nanostructured Ferritic Alloy 14YWT Using a Capacitive Discharge Resistance Welding Technique

Joining nanostructured ferritic alloys (NFAs) has proved challenging, as the nano-oxides that provide superior strength, creep resistance, and radiation tolerance at high temperatures tend to agglomerate, redistribute, and coarsen during conventional fusion welding. In this study, capacitive discharge resistance welding (CDRW)—a solid-state variant of resistance welding—was used to join end caps and thin-walled cladding tubes of the NFA 14YWT. The resulting solid-state joints were found to be hermetically sealed and were characterized across the weld region using electron microscopy (macroscopic, microscopic, and nanometer scales) and nanoindentation. Microstructural evolution near the weld line was limited to narrow (~50–200 μm) thermo-mechanically affected zones (TMAZs) and to a reduction in pre-existing component textures. Dispersoid populations (i.e., nano-oxides and larger oxide particles) appeared unchanged by all but the highest energy and power CDRW condition, with this extreme producing only minor nano-oxide coarsening (~2 nm → ~5 nm Ø). Despite a minimal microstructural change, the TMAZs were found to be ~10% softer than the surrounding base material. These findings are considered in terms of past solid-state welding (SSW) efforts—cladding applications and NFA-like materials in particular—and in terms of strengthening mechanisms in NFAs and the potential impacts of localized temperature–strain conditions during SSW.

36 MATERIALS SCIENCE↗

Southern Great Plains Merged and Extended Cloud Condensation Nuclei Data

This data set contains best-estimate cloud condensation nuclei (CCN) spectra for five years of data (2009-2013) at the DOE Atmospheric Radiation Measurement Southern Great Plains (SGP) observatory at 45-minute time resolution. All CCN spectra span a wide SSw range, 0.0001% to ~30%, which is not measurable by CCN instrumentation alone. This product has been constructed by combining merged aerosol size distribution data (Marinescu, Peter, and Levin, Ezra. SGP Merged Aerosol Size Distribution (CPC+SMPS+APS). United States: N. p., 2019. Web. doi:10.5439/1511037 discussed in: Marinescu, PJ, EJT Levin, D Collins, SM Kreidenweis, and SC van den Heever. 2019. "Quantifying Aerosol Size Distributions and Their Temporal Variability in the Southern Great Plains, USA." Atmospheric Chemistry and Physics 19(18): 11985–12006, https://doi.org/10.5194/acp-19-11985-2019) with measurements of aerosol hygroscopicity from the humidified tandem differential mobility analyzer (HTDMA) and measured CCN distributions over a limited water supersaturation (SSw) range. Nephelometer and aerosol chemical speciation monitor (ACSM) data are used to resolve discrepancies between the above measurements, and as quality control measures.

54 ENVIRONMENTAL SCIENCES↗

Proto-Examples of Data Access and Visualization Components of a Potential Cloud-Based GEOSS-AI System

Once a research or application problem has been identified, one logical next step is to search for available relevant data products. Thus, an early component of a potential GEOSS-AI system, in the continuum between observations and end point research, applications, and decision making, would be one that enables transparent data discovery and access by users. Such a component might be effected via the systems data agents. Presumably, some kind of data cataloging has already been implemented, e.g., in the GEOSS Common Infrastructure (GCI). Both the agents and cataloging could also leverage existing resources external to the system. The system would have some means to accept and integrate user-contributed agents. The need or desirability for some data format internal to the system should be evaluated. Another early component would be one that facilitates browsing visualization of the data, as well as some basic analyses.Three ongoing projects at the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) provide possible proto-examples of potential data access and visualization components of a cloud-based GEOSS-AI system. 1. Reorganizing data archived as time-step arrays to point-time series (data rods), as well as leveraging the NASA Simple Subset Wizard (SSW), to significantly increase the number of data products available, at multiple NASA data centers, for production as on-the-fly (virtual) data rods. SSWs data discovery is based on OpenSearch. Both pre-generated and virtual data rods are accessible via Web services. 2. Developing Web Feature Services to publish the metadata, and expose the locations, of pre-generated and virtual data rods in the GEOSS Portal and enable direct access of the data via Web services. SSW is also leveraged to increase the availability of both NASA and non-NASA data.3.Federating NASA Giovanni (Geospatial Interactive Online Visualization and Analysis Interface), for multi-sensor data exploration, that would allow each cooperating data center, currently the NASA Distributed Active Archive Centers (DAACs), to configure its own Giovanni deployment, while also allowing all the deployments to incorporate each others data. A federated Giovanni comprises Giovanni Virtual Machines, which can be run on local servers or in the cloud.

access↗

The Salience of Nonlinearities in the Boreal Winter Response to ENSO: Arctic Stratosphere and Europe

The Arctic stratospheric response to El Niño (EN) and La Niña (LN) is evaluated in a 41 member ensemble of the period 1980 to 2009 in the Goddard Earth Observing System Chemistry-Climate Model. We consider whether the responses to EN and LN are equal in magnitude and opposite in sign, whether the responses to moderate and extreme events are proportion-ate, and if the response depends on whether sea surface temperature anomalies (SSTs) peak in the Eastern Pacific (EP) or Central Pacific (CP). There is no indication of any nonlinearities between EN and LN, though in ~ 15% of the ensemble members the stratospheric sudden warming (SSW) frequencies for EN and LN are similar, suggesting that a similar SSW frequency for EN and LN, as has occurred over the past ~ 60 years, can occur by chance. The response to extreme EN events is not proportionate to the amplitude of the underlying SST anomalies in spring. EP EN events preferentially increase zonal wavenumber 1 and decrease zonal wavenumber 2 as compared to CP EN events, however the zonal-mean Arctic stratospheric and subpolar surface response is generally little different between EP EN and CP EN once one accounts for the relative weakness of CP events. These differences between EP and CP events and between moderate and extreme EN events only emerge if at least 25 events are composited, however, due to the small signal-to-noise ratio, and hence these differences may be of little practical benefit.

Sea surface temperature anomalies (SSTs) peak in t↗

Gravity Wave Weakening During the 2019 Antarctic Stratospheric Sudden Warming

A rare Antarctic stratospheric sudden warming (SSW) occurred on August 30, 2019, and was a minor warming event. We investigated variations in gravity wave (GW) activity before and after this Antarctic SSW event using two satellite measurements (AIRS and CIPS) and reanalysis data (GEOS-5 FP). GW activity over the Andes decreased after August 30, although the westerly wind was 40–60 m/s and cannot filter out GWs with small zonal phase speed. This decline over the Andes was probably caused by wave saturation. Zonal mean GW activity over Antarctica and the Southern Ocean likewise decreased, with a weakening of zonal wind. The zonal mean GW activity further decreased around September 8 which coincided with a reversal of the zonal mean zonal wind at 40 km. The decline in the zonal mean GW activity after August 30 was probably caused by wind filtering and polar night jet breaking.

Gravity waves↗

Size, Shape, and Arrangement of Cellulose Microfibril in Higher Plant Cell Walls

Plant cell walls from maize (Zea mays L.) are imaged using atomic force microscopy (AFM) at the sub-nanometer resolution. We found that the size and shape of fundamental cellulose elementary fibril (CEF) is essentially identical in different cell wall types, i.e., primary wall (PW), parenchyma secondary wall (pSW), and sclerenchyma secondary wall (sSW), which is consistent with previously proposed 36-chain model (Ding et al., 2006, J. Agric. Food Chem.). The arrangement of individual CEFs in these wall types exhibits two orientations. In PW, CEFs are horizontally associated through their hydrophilic faces, and the planar faces are exposed, forming ribbon-like macrofibrils. In pSW and sSW, CEFs are vertically oriented, forming layers, in which hemicelluloses are interacted with the hydrophobic faces of the CEF and serve as spacers between CEFs. Lignification occurs between CEF-hemicelluloses layers in secondary walls. Furthermore, we demonstrated quantitative analysis of plant cell wall accessibility to and digestibility by different cellulase systems at real-time using chemical imaging (e.g., stimulated Raman scattering) and fluorescence microscopy of labeled cellulases (Ding et al., 2012, Science, in press).

59 BASIC BIOLOGICAL SCIENCES↗

Hydraulic Properties of Grout Monoliths Containing Organic Ion Exchange Resin - 18369

The Waste Treatment and Immobilization Plant (WTP) at Hanford is being constructed to treat 56 million gallons of radioactive waste currently stored in underground tanks at the Hanford site. Operation of the WTP will generate several solid secondary waste (SSW) streams including spent spherical resorcinol formaldehyde cation exchange resin (IXr). The current plan for safe disposal of IXr is solidification in cementitious material (CM) typically comprised of cement, fly ash and blast furnace slag. Three CM formulations were tested to stabilize IXr for long-term land disposal. Two IXr loading rates, 0.1 and 0.3 v/v IXr:grout were used with the three CM formulations to prepare simulated waste form monoliths for hydraulic property testing. Following curing, the monoliths were removed from molds and tested to determine saturated hydraulic conductivity (K{sub sat}) and water retention properties. K{sub sat} was measured using a standard flexible permeameter method ASTM D-5084-10. A constant vapor pressure (CVP) method was used to determine van Genuchten parameters for desorption moisture retention curves for each of the SSW grout formulations. For the CVP method, vacuum saturated, intact wafers approximately 1.25 cm thick were placed above a saturated salt solution inside a sealed container for equilibration. Each saturated salt solution has an associated vapor pressure related to relative humidity in the container. Visual examination and three-dimensional x-ray micro computed tomography (μCT) indicated that the IXr was uniformly distributed in the cured waste form. Saturated hydraulic conductivity was within the range previously reported by Flach et al. in a study of the hydraulic properties of 98 pastes and grouts. The solidification of IXr in CM resulted in a waste form with water retention properties similar to cementitious pastes. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Secondary recrystallization behavior in strip-cast grain-oriented silicon steel processed by isothermal secondary annealing

Highlights: • Abnormal grain growth was successfully developed after annealing at 1025 °C for 15 min. • The formation mechanism of the Goss and {110}<227> secondary grains was elucidated. • Retention of matrix grain colonies in the interior or at the grain boundaries of secondary grains was explained. - Abstract: The primary annealed sheets of strip-cast grain-oriented silicon steel were isothermally secondary annealed for 15 min under 100% H{sub 2} atmosphere. The microstructure and crystallographic orientation at different annealing temperatures were characterized and the secondary recrystallization behavior was elucidated. It was observed that relatively complete abnormal grain growth occurred at 1025 °C. Incomplete abnormal grain growth developed when the temperature was lower than 1025 °C, and normal grain growth occurred when the temperature was higher than 1025 °C. During the abnormal grain growth, both of the Goss and {110}<227> grains developed because of the rapid decrease of the inhibiting force and the limited annealing time. Considering the high energy boundary (HE), coincidence site lattice boundary (CSL) and solid-state wetting (SSW) models for abnormal grain growth, the first one explained the development of the Goss and {110}<227> grains. Another result was that several matrix grain colonies were observed in the interior or at the boundaries of secondary grains after abnormal grain growth. The grains at the periphery of these colonies showed a large fraction of high energy boundaries (20–45° misorientation) with the surrounding secondary grain and similar grain size with the unconsumed matrix grains. Therefore, these colonies were expected to be consumed by prolonging the annealing time and thus the limited annealing time was responsible for their occurrence. A possible explanation for the dominated high energy boundaries instead of low energy boundaries at the periphery of these colonies was proposed. All of these behaviors promoted the understanding of abnormal grain growth.

36 MATERIALS SCIENCE↗

Unraveling Adsorbate-Induced Structural Evolution of Iron Carbide Nanoparticles

Iron carbide (Fe x C y ) nanoparticles (NPs) are promising candidates for replacing platinum group metals in industrial applications, such as high-temperature Fischer–Tropsch synthesis. However, due to their amorphous nature, characterization of the active sites has been challenging experimentally and computationally. Here, using a combined density functional theory (DFT), neural network interatomic potential-assisted global optimization, and ensemble learning study, we evaluate dynamic surface changes associated with syngas (H and CO) interactions. For this purpose, we have developed a general procedure that we use to model an experimentally relevant 270-atom Fe 182 C 88 NP using the neural network-assisted stochastic surface walk global optimization algorithm (SSW-NN). Once generated, the Fe 182 C 88 NP active sites and particle morphology are thoroughly characterized before the effects of syngas adsorbate interactions are explored by using DFT and molecular dynamics simulations. Lastly, we explore correlations between geometric and electronic features of the active sites and the adsorption of H (H ads ), using a regularized random forest machine learning algorithm. In doing so, we identified the Fe–C coordination number and p orbital occupancy as the most important descriptors affecting H ads . Furthermore, using a combined ML and quantum chemistry approach, our work demonstrates a general and efficient procedure for generating and probing complex surface phenomena on binary nanoparticles.

Adsorption↗

Oceanic fronts shape hemispheric contrasts in polar stratospheric extremes

Sudden Stratospheric Warmings (SSWs) and Polar Stratospheric Clouds (PSCs) exhibit striking inter-hemispheric asymmetries: SSWs are frequent in the Arctic but rare in the Antarctic, while PSCs are more persistent in the Antarctic. Although land–sea thermal contrast and orography (LSCO) have been traditionally invoked to explain these asymmetries, here we show using semi-idealized model experiments that even though LSCO strongly impacts the mean state of SSWs and PSCs, it alone cannot fully account for the observed differences. Using model experiments, we reveal that midlatitude oceanic sea surface temperature (SST) fronts represent a crucial supporting additional driver of the hemispheric stratospheric differences. Like LSCO, SST fronts enhance stratospheric convergence of resolved waves, strengthening the Brewer–Dobson Circulation and inducing high-latitude adiabatic warming. This warming significantly enhances Arctic SSW frequency and strongly suppresses PSC formation. Sub-grid-scale non–resolved wave forcing modulates the stratospheric resolved waves effect. The oceanic impact is dominated by North Pacific SST fronts. Our results highlight the indispensable role of SST fronts in shaping Arctic–Antarctic asymmetries in stratospheric dynamics and associated extremes.

Omrani, Nour-Eddine [Univ. of Bergen (Norway)] (OR↗

Identification of Focal Mechanisms of Seisms Occurring in the San Salvador Volcano-Ilopango Lake Area Between 1994 and March 2005

We studied the geographic area located in the central part of El Salvador, between the San Salvador Volcano (Quezaltepec) and Ilopango Lake. Its latitude is between 13 deg. 36' and 13 deg. 54', and longitude is between -89 deg. 18' and -88 deg. 57'. This area is directly affected by the WNW axis, the most prominent weak tectonic system in the region. Our research aimed to determine the focal mechanisms of seisms occurring in the studied area between 1994 and March 2005. Our analysis provided information about displacement types of the geological faults, using the wave impulse P method and computer applications ARCGIS and SEISAN, with the subroutine FOCMEC. Information of the studied seisms was obtained from the National Service of Territorial Studies (SNET) database. Geographic models used in the preparation of maps are from the geographic information system of the School of Physics at the University of El Salvador. The 37 focal mechanisms on the map of faults were identified in digital seismographs to determinate the arrival polarity of the wave P for each seism station. Data from the focal mechanisms were analyzed and correlated with their replications. The analysis allowed us to identify evidences to consider the fault continuity not reported by the last geological mission in El Salvador conducted in the 1970s. The fault continuity is located northwest of the studied geographical area, between San Salvador City and the San Salvador Volcano. The compression and strain axes for this area are two main horizontal force axes. The average orientation for the strain axis is NNE-SSW, and WNW-SEE for the compression axis. There is also important seismic activity in the Ilopango Lake and surrounding area. However, data did not allow us to make any inference. The tensors distribution resulted in a high dispersion corresponding to typical fauces models.

58 GEOSCIENCES↗

Profiling the Quito basin (Ecuador) using seismic ambient noise

SUMMARY Quito, the capital of Ecuador, with more than 2.5 M inhabitants, is exposed to a high seismic hazard due to its proximity to the Pacific subduction zone and active crustal faults, both capable of generating significant earthquakes. Furthermore, the city is located in an intermontane piggy-back basin prone to seismic wave amplification. To understand the basin’s seismic response and characterize its geological structure, 20 broad and medium frequency band seismic stations were deployed in Quito’s urban area between May 2016 and July 2018 that continuously recorded ambient seismic noise. We first compute horizontal-to-vertical spectral ratios to determine the resonant frequency distribution in the entire basin. Secondly, we cross-correlate seismic stations operating simultaneously to retrieve interstations surface-wave Green’s functions in the frequency range of 0.1–2 Hz. We find that Love waves travelling in the basin’s longitudinal direction (NNE–SSW) show much clearer correlograms than those from Rayleigh waves. We then compute Love wave phase-velocity dispersion curves and invert them in conjunction with the HVSR curves to obtain shear-wave velocity profiles throughout the city. The inversions highlight a clear difference in the basin’s structure between its northern and southern parts. In the centre and northern areas, the estimated basin depth and mean shear-wave velocity are about 200 m and 1800 ms−1, respectively, showing resonance frequency values between 0.6 and 0.7 Hz. On the contrary, the basement’s depth and shear-wave velocity in the southern part are about 900 m and 2500 ms−1, having a low resonance frequency value of around 0.3 Hz. This difference in structure between the centre-north and the south of the basin explains the spatial distribution of low-frequency seismic amplifications observed during the Mw 7.8 Pedernales earthquake in April 2016 in Quito.

Pacheco, D. (ORCID:0000000282355096)↗

$S$ Hmax orientation in the Alpine region from observations of stress-induced anisotropy of nonlinear elasticity

The orientation of $S$ Hmax is commonly estimated from in situ borehole breakouts and earthquake focal mechanisms. Borehole measurements are expensive, and therefore sparse, and earthquake measurements can only be made in regions with many well-characterized earthquakes. Here, we derive the stress-field orientation using stress-induced anisotropy in nonlinear elasticity. In this method, we measure the strain derivative of velocity as a function of azimuth. We use a natural pump-probe (NPP) approach which consists of measuring elastic wave speed using empirical Green’s functions (probe) at different points of the earth tidal strain cycle (pump). The approach is validated using a larger data set in the Northern Alpine Foreland region where the orientation of maximum horizontal compressive stress is known from borehole breakouts and drilling-induced fractures. The technique resolves NNW-SSW to N-S directed $S$ Hmax which is in good agreement with conventional methods and the recent crustal stress model. We confirm that the NPP method can be applied to dense large-scale seismic arrays. The technique is then applied to the Southern Alps to understand the contemporary stress pattern associated with the ongoing deformation due to counterclockwise rotation of the Adriatic plate with respect to the European plate. Our results explain why the two major faults in Northeastern Italy, the Giudicarie Fault and the Periadriatic Line (Pustertal–Gailtal Fault) are currently inactive, while the currently acting stress field allows faults in Slovenia to deform actively. We have demonstrated that the pump-probe method has the potential to fill in the measurement gap left by conventional approaches, both in terms of regional coverage and in depth.

58 GEOSCIENCES↗

Optimal Energy Storage System and Smart Switch Placement in Dynamic Microgrids With Applications to Marine Energy Integration

Here this paper studies a dynamic microgrid (DMG) planning problem that places energy storage systems (ESSs) and smart switches (SSWs) optimally in the system. We apply the proposed methodology to applications concerning marine renewable energy (MRE). MRE is an emerging clean energy resource with enormous capacity but volatile and intermittent energy output profiles. Innovative grid-integration technologies designed to enhance the reliability of an MRE-integrated system are needed. However, there are still limited studies in this regard. Existing works have shown the promising prospect of using a dynamic microgrid (DMG) operational concept to accommodate renewable resources in distribution systems, but they usually assume fixed ESS and SSW installations. To further improve the operational flexibility of DMGs, we propose a DMG planning methodology that optimally places ESSs and SSWs so that a DMG with MRE is warranted with proper resource adequacy and topological flexibility in both the contingency and normal operations. We use realistic case studies based on a real-world distribution network and the U.S. Department of Energy's MRE dataset to verify the value and validity of the proposed work.

25 ENERGY STORAGE↗

Utah FORGE: Well 58-32 Stimulation Conference Paper and Data

The U.S. Department of Energy’s (U.S. DOE) Frontier Observatory for Research in Geothermal Energy (FORGE) is a field laboratory that provides a unique opportunity to develop and test new technologies for characterizing, creating and sustaining Enhanced Geothermal Systems (EGS) in a controlled environment. In 2018, the U.S. DOE selected a site in south-central Utah for the FORGE laboratory. Numerous geoscientific studies have been conducted in the region since the 1970s in support of geothermal development at Roosevelt Hot Springs. A vertical scientific well, 58-32, was drilled and tested to a depth of 2290 m (7515 ft) GL in 2017 on the FORGE site to provide additional characterization of the reservoir rocks. The well encountered a conductive thermal regime and a bottom hole temperature of 199degC (390degF). More than 2000 natural fractures were identified, but measured permeabilities are low, less than 30 micro-darcies. Induced fractures indicate that the maximum horizontal stress trends NNE-SSW, consistent with geologic and well observations from the surrounding area. Approximately 45 m (147 ft) at the base of the well was left uncased. A maximum wellhead pressure of 27.6 MPa (4000 psig) at an injection rate of ~1431 L/min (~9 bpm) was measured during stimulation testing in September 2017. Conventional diagnostic evaluations of the data suggest that hydraulic fracturing and shearing occurred. Estimates of the stress gradient for delta_h_min range from of 16.7 to 17.6 kPa/m (0.74 to 0.78 psi/ft). A gradient of 25.6 kPa/m (1.13psi/ft) was calculated for delta_V. In 2019, the 2017 open-hole stimulation in well 58-32 was repeated with injection rates up to 2385 L/min (15 bpm). Two additional stimulations were conducted in the cased portion of the well; one to stimulate critically stressed fractures and the second to test noncritically stressed fractures. Breakdown of the zone spanning critically-stressed fractures occurred at a surface pressure of approximately 29.0 MPa (4200 psig). Although stimulation of the noncritically stressed fractures was interrupted by failure of the bridge plug beneath the perforated interval, micro-seismic data suggests stimulation of the fractures may have been initiated at a surface pressure of 45.5 MPa (6600 psig). These stimulation results support the conclusion the Mineral Mountains granitoid is an appropriate host for EGS development. Micro-seismicity was monitored during the stimulations using surface and downhole instrumentation. Five seismometers and a nodal array of 150 seismic sensors were deployed on the surface. A Distributed Acoustic Sensing (DAS) cable and a string of 12 geophones were deployed in well 78-32, drilled to a depth of 998 m (3274 ft) GL. A broadband sensor and a high-temperature geophone were deployed in well 68-32, drilled to a depth of 303 m (994 ft) GL. More than 420 micro-seismic events were detected by the geophone string. Other instruments detected fewer events.

15 GEOTHERMAL ENERGY↗