Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRINTED CIRCUIT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1970

Controlled etching of printed-circuit boards

Ferric chloride in an aqueous medium etches copper from the surface of printed-circuit boards. Ferric ions are reduced to ferrous ions resulting in a reduced etching rate.

Kovell, S. P.↗
NASA NTRS1983

Terminal Strip Facilitates Printed-Circuit Board Changes

Laminanted copper and polyimide terminal strip makes it easy to modify printed-circuit (PC) board, after board has been fabricated. When epoxied over conductors or insulating portion of PC board, strip provides series of solder-coated copper conductor pads to which integrated-circuit leads are soldered for functional changes. Terminal strips accommodate leads on dual inline IC package or as staggered single or multiple leads on planar mounted flatpacks.

Pinto, E. A.↗
NASA NTRS1975

Testing of printed circuit board solder joints by optical correlation

An optical correlation technique for the nondestructive evaluation of printed circuit board solder joints was evaluated. Reliable indications of induced stress levels in solder joint lead wires are achievable. Definite relations between the inherent strength of a solder joint, with its associated ability to survive stress, are demonstrable.

Espy, P. N.↗
NASA NTRSDate not supplied

An Overview of Printed Circuit Board Risks and Supplier Capability

This NESC Webinar provides the audience a snapshot of quality variations in printed circuit boards, as assessed, using experiences in processing and risk analysis of PCB structural integrity coupons. The presentation will focus on PCB quality metrics, the relative type and number of non-conformances observed and trend analysis using statistical methods. Trend analysis shows the top five non-conformances observed across suppliers, the associated root cause(s) behind these non-conformance, suggestions of mitigation plans and most importantly – the relation of these non-conformances to end item reliability. The statistical trends will then be matched with the current state of the domestic PCB supplier base, its key challenges and opportunities. The presentation further discusses the methods applied at GSFC for evaluating candidate PCB technologies that promote the adoption of higher throughput and faster processing technology for GSFC missions.

printed cricuit boards, supplier capability, risk ↗
NASA NTRS1977

"Printed-circuit" rectenna

Rectifying antenna is less bulky structure for absorbing transmitted microwave power and converting it into electrical current. Printed-circuit approach, using microstrip technology and circularly polarized antenna, makes polarization orientation unimportant and allows much smaller arrays for given performance. Innovation is particularly useful with proposed electric vehicles powered by beam microwaves.

Dickinson, R. M.↗
NASA NTRSDate not supplied

An Overview of Printed Circuit Board Risks and Supplier Capability (Reuse Document ID 20205007963)

This HDPUG Webinar provides the audience a snapshot of quality variations in printed circuit boards, as assessed, using experiences in processing and risk analysis of PCB structural integrity coupons. The presentation will focus on PCB quality metrics, the relative type and number of non-conformances observed and trend analysis using statistical methods. Trend analysis shows the top five non-conformances observed across suppliers, the associated root cause(s) behind these non-conformance, suggestions of mitigation plans and most importantly – the relation of these non-conformances to end item reliability. The statistical trends will then be matched with the current state of the domestic PCB supplier base, its key challenges and opportunities. The presentation further discusses the methods applied at GSFC for evaluating candidate PCB technologies that promote the adoption of higher throughput and faster processing technology for GSFC missions.

printed cricuit boards, supplier capability, risk ↗
DOE OSTI2025

Adhesively Bonded Copper and Polyimide for Flexible Printed Circuit Boards: A Data-Driven Degradation Study Under Accelerated Aging

The long-term durability of polyimide laminated adhesive based flexible printed circuit boards (PCBs) is critical to the microelectronics industry. The interface of the adhesive layer binding the polyimide and copper layers is particularly vulnerable since decreased bonding strength can lead to deadhesion, performance loss, and premature device failure. Here, in this study, adhesive-bonded polyimide and copper samples are subjected to 1000 h of damp heat exposure (85 °C/85%RH) to evaluate the impact of moisture and copper inclusion on the adhesive bonding performance. Significant copper diffusion through the adhesive layer is observed, which, combined with moisture uptake, is found to substantially weaken interfacial adhesion in copper-containing samples, thereby reducing device lifetime. Observed surface and bulk material changes are correlated to adhesion strength using the network structural equation modeling (netSEM) approach, resulting in a robust predictive model of performance degradation based on measurable materials properties.

Chemistry↗
NASA NTRS1990

Printed-Circuit Tape Measures For X-Ray Inspections

Known pattern impressed on x-ray image for reference. Tapes made by flexible-printed-circuit technology provides identification and position references for x-ray images of weld joints. Proposed tapes consist of etched copper patterns on flexible substrates. X-rays record pattern of tape on film beneath butt-welded panels. Pattern becomes convenient reference for analysis and digitization of x-ray image.

Sullivan, John E., Jr.↗
NASA NTRS2014

Advances in Current Rating Techniques for Flexible Printed Circuits

Twist Capsule Assemblies are power transfer devices commonly used in spacecraft mechanisms that require electrical signals to be passed across a rotating interface. Flexible printed circuits (flex tapes, see Figure 2) are used to carry the electrical signals in these devices. Determining the current rating for a given trace (conductor) size can be challenging. Because of the thermal conditions present in this environment the most appropriate approach is to assume that the only means by which heat is removed from the trace is thru the conductor itself, so that when the flex tape is long the temperature rise in the trace can be extreme. While this technique represents a worst-case thermal situation that yields conservative current ratings, this conservatism may lead to overly cautious designs when not all traces are used at their full rated capacity. A better understanding of how individual traces behave when they are not all in use is the goal of this research. In the testing done in support of this paper, a representative flex tape used for a flight Solar Array Drive Assembly (SADA) application was tested by energizing individual traces (conductors in the tape) in a vacuum chamber and the temperatures of the tape measured using both fine-gauge thermocouples and infrared thermographic imaging. We find that traditional derating schemes used for bundles of wires do not apply for the configuration tested. We also determine that single active traces located in the center of a flex tape operate at lower temperatures than those on the outside edges.

Hayes, Ron↗
NASA NTRS2012

Reducing Printed Circuit Board Emissions with Low-Noise Design Practices

This paper presents the results of an experiment designed to determine the effectiveness of adopting several low-noise printed circuit board (PCB) design practices. Two boards were designed and fabricated, each consisting of identical mixed signal circuitry. Several important differences were introduced between the board layouts: one board was constructed using recommended low-noise practices and the other constructed without such attention. The emissions from the two boards were then measured and compared, demonstrating an improvement in radiated emissions of up to 22 dB.

Bradley, Arthur T.↗
NASA NTRS2004

Printed Circuit Board Design with HDL Designer

Staying up to date with the latest CAD tools both from a cost and time perspective is difficult. Within a given organization there may be experts in Printed Circuit Board Design tools and experts in FPGA/VHDL tools. Wouldn't it be great to have someone familiar with HDL Designer be able to design PCBs without having to learn another tool? This paper describes a limited experiment to do this.

Winkert, Thomas K.↗
NASA NTRS1989

Using multiple sensors for printed circuit board insertion

As more and more activities are performed in space, there will be a greater demand placed on the information handling capacity of people who are to direct and accomplish these tasks. A promising alternative to full-time human involvement is the use of semi-autonomous, intelligent robot systems. To automate tasks such as assembly, disassembly, repair and maintenance, the issues presented by environmental uncertainties need to be addressed. These uncertainties are introduced by variations in the computed position of the robot at different locations in its work envelope, variations in part positioning, and tolerances of part dimensions. As a result, the robot system may not be able to accomplish the desired task without the help of sensor feedback. Measurements on the environment allow real time corrections to be made to the process. A design and implementation of an intelligent robot system which inserts printed circuit boards into a card cage are presented. Intelligent behavior is accomplished by coupling the task execution sequence with information derived from three different sensors: an overhead three-dimensional vision system, a fingertip infrared sensor, and a six degree of freedom wrist-mounted force/torque sensor.

Sood, Deepak↗