Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Microstructural properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Microstructure-Property Correlations in Fiber Laser Welded Nb-Ti Microalloyed C-Mn Steel

Mechanical Performance of traditional gas-shielded arc welded joints of 700 MPa grade microalloyed C-Mn steel cannot meet service requirements. Laser welding, with its characteristic high energy density, is known to improve the welding performance of experimental steels. In the present study, Nb-Ti microalloyed steel with a thickness of 4.5 mm was welded using a 4 kW fiber laser. The microstructure, precipitation, and mechanical properties of the welded joints were studied. The hardness and tensile strength of the welded joints were higher than those of the base metal (BM). The microstructure of the fusion zone (FZ) and coarse grain heat affected zone (CGHAZ) was lath martensite (LM), while the microstructure of the fine grain HAZ and mixed grain HAZ consisted of ferrite and martensite/austenite islands. Although LM was observed in both the FZ and CGHAZ, the hardness and calculated tensile strength of the FZ were lower than those of the CGHAZ, due to a reduction in solid solution strengthening by element loss and the dissolution of high-hardness precipitates in FZ. Most precipitates such as [(Nb,Ti)C and (Nb,Ti)(C,N)] that were present in the BM were dissolved, which led to an increase in C and N in solid solution in the FZ. Thus, the elastic modulus of the FZ was higher than that of the BM. Similarly, the elastic modulus of the CGHAZ was higher than that of the BM due to the segregation of C and N atoms during the welding process. The toughness of the FZ was superior to that of the BM, and the toughness of the HAZ approached 91% of that of the BM. The change in toughness primarily depended on the microstructural refinement, the increase in the fraction of grains with high misorientation, the residual austenite in the FZ and CGHAZ, and the dissolution of coarse precipitates.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Exploring the Microstructure-Property Relationship of Mg-Al-Mn alloys enhanced via Friction Stir Processing

Friction Stir Processing (FSP) is a solid-state thermomechanical processing technique that enables local grain refinement, densification, and homogenization of microstructure in metallic components. Here, FSP is applied to thin sheets of high-pressure die cast AM60 to address the porosity and heterogeneities inherent to the casting process. In this work, microstructure characterization is correlated to improvements in the static mechanical properties of the Mg-Al-Mn alloy system at various FSP processing conditions. Notably, there is a significant increase in the ductility and ultimate tensile stress of system following FSP. The dominant deformation mechanisms for the as-cast material and the FSP material are investigated. Finally, the fatigue life improvement is correlated to microstructure modifications that may lead to distinct behavior in crack initiation and crack propagation for the as-cast and FSP material.

Garcia, David↗
DOE OSTI2019

BisQue for 3D Materials Science in the Cloud: Microstructure–Property Linkages

Accelerating the design and development of new advanced materials is one of the priorities in modern materials science. These efforts are critically dependent on the development of comprehensive materials cyber-infrastructures which enable effcient data storage, management, sharing, and collaboration as well as integration of computational tools that help establish processing{structure{property relationships. In this contribution, we present implementation of such computational tools into a cloud-based platform called BisQue (Kvilekval et al., 2010). We first describe the current state of BisQue as an open-source platform for multidisciplinary research in the cloud and its potential for 3D materials science. We then demonstrate how new computational tools, primarily aimed at processing{structure{property relationships, can be implemented into the system. Speci cally, in this work, we develop a module for BisQue that enables microstructure-sensitive predictions of effective yield strength of two-phase materials. Towards this end, we present an implementation of a computationally effcient data-driven model into the BisQue platform. The new module is made available online and can be used from a web browser without any special software and with minimal computational requirements on the user end. The capabilities of the module for rapid property screening are demonstrated in case studies with two different methodologies based on datasets containing 3D microstructure information from (i) synthetic generation and (ii) sampling large 3D volumes obtained in experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2019

High-throughput, super-resolution 3D reconstruction of nano-structured solid oxide fuel cell electrodes and quantification of microstructure-property relationships

Nano-structuring methods are actively applied to solid oxide fuel cell electrodes to reduce the operating temperature while preserving a high electro-catalytic activity. The unique nanoscale microstructure is vital to electrochemical performance, yet not well quantified in three dimensions. Here, with a multi-stage recovering principle of distance correlation functions, the three-dimensional microstructures of La 0.8 Sr 0.2 MnO 3-δ nanoparticles infiltrated porous Y 0.16 Zr 0.84 O 2-δ electrodes are reconstructed with a dimension of 1024 × 1024 × 1024 voxels at a resolution of 7.5 nm from one two-dimensional micrograph. The key geometric characteristics, such as tortuosity factors, active surface/interface areas and three-phase boundary length, are calculated from the reconstructed three-dimensional microstructures at various loadings of La 0.8 Sr 0.2 MnO 3-δ . Combining with the analysis of distribution of relaxation times, the active three-phase boundary length is shown to be the main factor governing the electrode impedance, and is related quantitatively to the electrochemical process at high frequency. The accuracy of capturing nanoscale features is validated by the focused ion beam sectioning dataset of a Ni-Y 0.16 Zr 0.84 O 2-δ electrode at nanoscale resolution. Lastly, this work provides a promising strategy for reconstructing three-dimensional heterogeneous nanostructures from one super-resolution two-dimensional micrograph, and demonstrates a quantitative approach for uncovering processing-structure-property relationships of nanostructured electrodes and beyond.

25 ENERGY STORAGE↗
DOE OSTI2019

Combined crystal plasticity and grain boundary modeling of creep in ferritic-martensitic steels: II. The effect of stress and temperature on engineering and microstructural properties

This paper describes a series of physically-based crystal plasticity finite element method (CPFEM) simulations of long-term creep and creep rupture of Grade 91 steel. It is Part 2 of a two part series of papers. Part 1 describes the simulation framework; this part focuses on specific simulations and on how the predicted long-term creep properties of Grade 91 compare to the assumptions used in current high temperature design practices. This work extends the model developed in Part 1 to look at creep properties at different temperatures, principal stresses, and multiaxial stress states. The simulations show that empirically extrapolating creep rupture stresses from short-term experimental data may substantially over predict the actual long-term creep properties of Grade 91. Additionally, the CPFEM calculations predict a transition from notch strengthening creep behavior for high values of maximum principal stress and moderate notch severity to notch weakening behavior for low principal stresses and more severe notches. The latter regime better categorizes conditions in engineering components designed for long term elevated temperature use, which implies Grade 91 may be a notch weakening material in actual service. This would have a significant impact on high temperature design practices, though confirmatory test data on long-life, low stress notched specimens is difficult to obtain. Finally, one advantage of the physically-based modeling approach adopted here is that the simulation results also elucidate the microstructural mechanisms causing the macroscopic trends in engineering properties predicted by the simulations. This paper shows that the detailed micromechanical mechanisms predicted by the CPFEM simulations can be abstracted with a simple micromechanical model that can be used to both explain the detailed results and make improved predictions of engineering properties from experimental data.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Detailed investigation of optoelectronic and microstructural properties of plasma polymerized cyclohexane thin films: Dependence on the radiofrequency power

Optical properties of polymerized cyclohexane films deposited by radiofrequency plasma enhanced chemical vapor deposition technique at different radiofrequency powers onto glass and silicon substrates, are studied and correlated with the microstructure of the films, using a combination of atomic force microscopy, Raman and Fourier Transformer Infrared spectroscopy and optical measurements. The optical constants such as refractive index n, dielectric permittivity ε and extinction k and absorption α coefficients, are extracted from transmission and reflection spectra through the commercial software CODE. These constants lead, by using common theoretical models as Cauchy, Lorentz, Tauc and single effective oscillator, to the determination of the static refractive index n{sub s} and permittivity ε{sub s}, the plasma frequency ω{sub p}, the carrier density to effective mass ratio N/m{sub e}{sup *}, the optical conductivity σ{sub oc}, the optical band gap E{sub g} and the oscillation and dispersion energies E{sub 0} and E{sub d}, respectively. We find that n, ε{sub s}, ω{sub p}, N/m{sub e}{sup *}, E{sub d}, increase with radiofrequency power, while E{sub g} and E{sub 0} decrease in the same range of power. These results are well correlated with those obtained from atomic force microscopy, Raman and infrared measurements. They also indicate that the increase of the radiofrequency power promotes the fragmentation of the precursor and increases the carbon C-sp{sup 2} hybridization proportion, which results in an improvement of the optoelectronic properties of the films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Effect of bioglass 45S5 addition on properties, microstructure and cellular response of tetracalcium phosphate/monetite cements

Tetracalcium phosphate/nanomonetite (TTCPMH) cement composites with 7.5 and 15 wt% addition of melt-derived 45S5 bioactive glass were prepared by mechanical homogenization of powder components and 2% NaH{sub 2}PO{sub 4} solution was used as a hardening liquid. The properties of composites with the acidic (Ca/P ratio equal 1.5) or basic (Ca/P ratio equal 1.67) TTCPMH component were compared. Addition of glass component caused rapid rise in pH of composites up to 10. In microstructure of basic cement composite, the large bioglass particles weakly bounded to surrounding cement matrix were found contrary to a more compact microstructure of acidic cement composites with the high number of spherical silica particles. Both the significant refinement of hydroxyapatite particles and the change to needle-like morphology with rise in the content of bioglass were identified in hydroxyapatite coatings created during soaking of composites in phosphate buffered saline. In acidic cement mixtures, the increase of compressive strength with an amount of bioglass was found whereas the opposite tendency was revealed in the case of basic cement mixtures. The higher concentrations of ions were verified in solutions after immersion of acidic cement composites. The severe cytotoxicity of extracts and composite cement substrates containing 15 wt% of bioglass demonstrated adverse effects of both the ionic concentrations and unappropriate surface texture on proliferation of mesenchymal stem cells. The enhanced ALP activities of cells cultured on composite cements confirmed the positive effect of bioactive glass addition on differentiation of mesenchymal stem cells. - Highlights: • Novel B45S5 bioglass/tetracalcium phosphate/nanomonetite cement composites • Cement basicity negatively affected their microstructure. • Acid composite cements had higher compressive strengths than basic composites. • Fast differentiation of MSC to osteoblast line on composite with 7.5 wt% of bioglass • Severe cytotoxicity of 24 h extracts from composites with 15 wt% of bioglass.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Quantitative Characterization of the Microstructure-Property Relationships in Ni and MIEC Nanocatalyst-Infiltrated Ni/YSZ Anodes

The performance of solid oxide fuel cell (SOFC) anodes can be improved by infiltration of nanoscale electrocatalysts, which increases triple phase boundary (TPB) density, but only when the added TPBs are active. Quantitative characterization of the microstructure of infiltrated nanocatalysts remains a critical challenge in understanding their role in improved performance. This paper explores the relationship between electrochemical performance and microstructure for Ni/YSZ anodes infiltrated with Ni, gadolinium-doped-ceria (GDC), and Ni/GDC nanocatalysts using a combination of electrochemical impedance spectroscopy (EIS), distribution of relaxation times (DRT) analysis, scanning electron microscopy (SEM) microstructural characterization, and three-dimensional (3-D) anode reconstruction. Estimated polarization resistance improvements as a result of nickel nanoparticle infiltration are discussed.

Rix, Jillian↗
DOE OSTI2025

Process-Microstructure-Property Relationships in Low Heat Input Wire-Arc Additive Manufacturing (WAAM) of Ni-Based Superalloy Haynes 282

Conference presentation on WAAM process optimization on Ni-based superalloy Haynes® 282®. This alloy is targeted for advanced power generation systems for its superior high temperature mechanical properties. Wire-arc additive manufacturing (WAAM) offers attractive cost and materials savings with high deposition rates. Based on initial build process optimization, WAAM blocks were made, and screened for defects using high-throughput CT scanning. The microstructural evolution in arc energy range of 250-700 J/mm was characterized in the as-built and aged conditions, using electron microscopy. Results showed self-consistent microstructure across conditions, with grain size dependence on arc energy, MC and M6C carbides in as-built, and blocky grain boundary M23C6 in as-heat-treated condition. Further reductions in as-built porosity were explored through 20+ combinations of H2 and CO2 additions to shielding gas. Initial results show improved wetting behavior, and bead overlap with up to 1% H2 and up to 0.25% CO2. Combination of experimentally determined datasets provided comprehensive understanding of process-structure-property relationships in WAAM Haynes 282.

Haynes 282↗
DOE OSTI2019

Lifetime Stability and Microstructure Properties of Cr/B 4 C X-ray Reflective Multilayer Coatings

Here, this paper demonstrates that highly reflective Cr/B 4 C multilayer interference coatings with nanometric layer thicknesses, designed to operate in the soft X-ray photon energy range, have stable reflective performance for a period of 3 years after deposition. The microstructure and chemical composition of layers and interfaces within Cr/B 4 C multilayers is also examined, with emphasis on the B 4 C-on-Cr interface where a significant diffusion layer is formed and on the oxide in the top B 4 C layer. Lastly, multiple characterization techniques (X-ray reflectivity at different photon energies, X-ray photoelectron spectroscopy, transmission electron microscopy, electron diffraction and X-ray diffraction) are employed and the results reveal a consistent picture of the Cr/B 4 C layer structure.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Biodegradable High-Molecular-Weight Poly(pentylene adipate- co -terephthalate): Synthesis, Thermo-Mechanical Properties, Microstructures, and Biodegradation

Poly(pentylene adipate-co-terephthalate) (PPAT) is a promising biobased and biodegradable polymer that can replace polyethylene in flexible packaging films where biodegradability is desired. High-molecular-weight (100K–145 KDa) aliphatic–aromatic polyester PPAT was successfully synthesized, and the effects of reaction conditions on molecular weight were reported. PPAT polyesters were characterized for polymer compositions, number-average unit length, thermal transitions, and rheological properties. PPAT compression-molded films were characterized for crystallinity and tensile properties to correlate micro- and macroproperties. PPAT compression-molded films exhibited up to a 76% higher tensile modulus than compression-molded films from poly(butylene adipate-co-terephthalate) (PBAT), making PPAT films potentially comparable with compression-molded films from linear low-density polyethylene (LLDPE). Finally, PPAT is biodegradable in soil and freshwater environments with estimated 90% biodegradation times of 504–580 and 604–845 days, respectively, while PBAT takes 971 days in soil and 395 days in freshwater.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Evaluation of statistical variation of microstructural properties and temperature effects on creep fracture of Grade 91

This report describes three improvements made to a physically-based model for creep and creep rupture in Grade 91 steel developed as part of the Advanced Reactor Technologies program: 1. Progress on transitioning the model framework to the MOOSE finite element package to improve parallel scalability, increase the physical size of the simulations, and incorporate multiphysics effects into the model. 2. The development of a physically-based method of scaling the model parameters to accurately capture creep in Grade 91 for temperatures in the range of 450° to 500° C. 3. Extending the model to account for microstructural statistical variations, specifically capturing the effect of grain boundary energy on the physical parameters underling the model for grain boundary void nucleation and cavitation. Put together, these improvements result in an accurate, predictive model for the physical response of Grade 91 steel over the expected use temperature range for the material in future liquid metal cooled fast reactors. The model can be used to more accurately predict engineering properties of the material for very long service lives, which could lead to safer, more economical future advanced reactors.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2019

Prepared σ-MnO{sub 2} thin films by chemical bath deposition methods and study of its optical and microstructure properties

In this work, σ-MnO{sub 2} thin films deposited by chemical bath deposition method at three concentration of solution. The influence of concentration on thickness, micromorphology and optical parameters were investigated by XRD, SEM, UV–Vis spectrophotometer, atomic force microscopic and multifractal analyses. The optical band gap of thin films is decreased with increase in concentration. The optical parameters: refractive index and real part of dielectric constant are increased with increase in concentration, but decrease in extinction coefficient and imaginary parts of dielectric constant are observed. The micromorphology and roughness of layers surface are changed as function of concentration. The studied samples have multifractal properties and can be included in computer algorithms useful for graphical representation of 3-D microtexture surfaces of σ-MnO{sub 2} thin films.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Unraveling the Photovoltaic, Mechanical, and Microstructural Properties and Their Correlations in Simple Poly(3‐pentylthiophene) Solar Cells

Abstract The power conversion efficiency of polythiophene organic solar cells is constantly refreshed. Despite the renewed device efficiency, very few efforts have been devoted to understanding how the type of electron acceptor alters the photovoltaic and mechanical properties of these low‐cost solar cells. Herein, the authors conduct a thorough investigation of photovoltaic and mechanical characteristics of a simple yet less‐explored polythiophene, namely poly(3‐pentylthiophene) (P3PT), in three different types of organic solar cells, where ZY‐4Cl, PC 71 BM, and N2200 are employed as three representative acceptors, respectively. Compared with the reference poly(3‐hexylthiophene) (P3HT)‐based solar cells, P3PT‐based devices, all perform more efficiently. Particularly, the P3PT:ZY‐4Cl blend exhibits the highest efficiency (ca. 10%) among the six combinations and outperforms the prior top‐performance system P3HT:ZY‐4Cl. Furthermore, the blend films based on N2200 exhibit a high crack‐onset strain of ∼38% on average, which is approximately 15‐ and 17‐times higher than those of ZY‐4Cl and PC 71 BM, respectively. The microstructural origins for the above difference are well elucidated by detailed grazing incidence X‐ray scattering and microscopy analysis. This work not only underlines the potential of P3PT in prolific solar cell research but also demonstrates the superior tensile properties of polythiophene‐based all‐polymer blends for the preparation of stretchable solar cells.

Polymer Science↗
DOE OSTI2023

Using Artificial Microstructures to Understand Microstructure Property Relationship-Toughening Mechanisms in Metallic Glass (Final Report)

Metallic glasses are a new class of structural materials which exhibit exciting mechanical properties including high strength and elasticity. In terms of fracture toughness, the material class of metallic glasses spans a wide range; Some metallic glasses are extremely brittle and exhibit near ideal brittle behavior whereas others can be exceptional tough with values comparable to the toughest metals out there. Such large range of observed fracture toughness within the material class of metallic glasses is surprising as they have seemingly a very similar atomic structure. Therefore, we developed “artificial microstructures” which allows to decouple the various contribution of sample geometry, imperfection and structure. Specifically, we decouple variations in the alloys’ chemical composition and the atomic structure and quantified the resulting fracture toughness. Atomic structure of a metallic glass can be modified by the fictive temperature. The fictive temperature of a glass is the temperature at which the liquid metallic glass falls out of equilibrium upon colling and forms a glass. Upon further cooling the structure is maintained only thermal oscillations decrease due to a lower absolute temperature. We found that the effect of fictive temperature (same chemistry, different structural stages of the glass) is comparable to the variations of fracture toughness when the chemistry is varied. Hence, it appears that the subtle differences in the glass structure are responsible for the large range of fracture toughness’s observed. Our results reveal that fracture toughness within the material class of metallic glasses varies significantly and we found some example alloys with exceptional high resistance to fracture and others that are almost ideally brittle. Significant influences on the fracture toughness have the structure of the glass, its chemistry, and some imperfections in the structure.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Experimental study and effect of particulate interference on the microhardness, wear and microstructural properties of ternary doped coating

This paper studies effects of the composite particle infringement of ZnO/Cr{sub 2}O{sub 3} on zinc rich ternary based coating. The corrosion-degradation property in 3.5% NaCl was investigatedusing polarization technique. The structural characteristics of the multilayer produce coatings were evaluated by scanning electron microscope (SEM) equipped with an energy dispersive spectrometer (EDS). The mechanical response of the coated samples was studied using a diamond base Dura –Scan) micro-hardness tester and a MTR-300 dry abrasive wear tester. The combined effect of the coatings gave highly-improved performance on microhardness, corrosion and wear damage. This also implies that protection of wind-energy structures in marine environments can be achieved by composite strengthening capacity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Microstructure–Property Correlation in a Laser Powder Bed Fusion Processed High-Strength AF-9628 Steel

Laser powder bed fusion additive manufacturing (LPBF-AM) of a low-alloy, high-performance AF-9628 steel results in exceptionally high strength and good ductility. The reasons for such mechanical properties are investigated through detailed microscopy performed at several length scales. Thus, the characterization of melt pool, porosity, grain morphology, phases, and dislocations is performed in the as-printed material. The as-printed material consists of only 0.004 vol% of uniformly distributed porosity, single-phase martensitic laths with an average lath size of ≈2.5 μm, the absence of carbides indicating interstitial trapping of C atom, and high dislocation density in the martensitic laths. Experimental data through microscopy are then fed in analytical models for calculating strengthening contributions from various strengthening mechanisms. Calculated yield strength agrees well with experimentally determined value, and therefore, activation of various strengthening mechanisms is established in as-printed AF-9628.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Microstructure–property relationships in a high-strength 51Ni–29Ti–20Hf shape memory alloy

NiTiHf alloys exhibit remarkable shape memory and pseudoelastic properties that are of fundamental interest to a growing number of industries. In this study, differential scanning calorimetry and isothermal compression tests have revealed that the 51Ni–29Ti–20Hf alloy has useful shape memory properties that include a wide range of transformation temperatures as well as highly stable pseudoelastic behavior. These properties are governed by short-term aging conditions, which may be tailored to control transformation temperatures while giving rise to exceptionally high austenite yield strengths which aid transformation stability. The yield strength of the austenite phase can reach 2.1 GPa by aging for 3hrs at 500°C, while aging for 3hrs at 700°C produced an alloy with an austenite finish temperature (A f ) of 146°C. High-resolution scanning transmission electron microscopy has revealed a new precipitate phase, H-phase, under the homogenized and extruded condition and the aged 3 hrs at 500°C condition, but only the previously identified H-phase precipitate was observed after aging at temperatures of 600°C and 700°C for 3 hrs. Finally, dislocation analysis indicated that plastic deformation of the austenite phase occurred by <100> type slip, similar to that observed in binary NiTi.

36 MATERIALS SCIENCE↗