Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ITB”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

48 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Performance Cycle Analysis of a Two-Spool, Separate-Exhaust Turbofan With Interstage Turbine Burner

This paper presents the performance cycle analysis of a dual-spool, separate-exhaust turbofan engine, with an Interstage Turbine Burner serving as a secondary combustor. The ITB, which is located at the transition duct between the high- and the low-pressure turbines, is a relatively new concept for increasing specific thrust and lowering pollutant emissions in modern jet engine propulsion. A detailed performance analysis of this engine has been conducted for steady-state engine performance prediction. A code is written and is capable of predicting engine performances (i.e., thrust and thrust specific fuel consumption) at varying flight conditions and throttle settings. Two design-point engines were studied to reveal trends in performance at both full and partial throttle operations. A mission analysis is also presented to assure the advantage of saving fuel by adding ITB.

Liew, K. H.↗
DOE OSTI2026

Density limit in peeling-limited pedestals at and above the Greenwald value in DIII-D high poloidal beta plasmas

High pressure, peeling limited pedestals with pedestal normalized beta β N,ped >2 and pedestal top density n ped at or above the Greenwald density nG have been achieved in DIII-D high poloidal beta plasmas, with high global normalized beta β N >3 and energy confinement H 98 ~1.2-1.7. Higher β N allows higher pedestal density above the Greenwald value and higher pedestal pressure, even with a low injected torque. MHD modeling confirms that the experimental profiles lie near the peeling-mode unstable boundary with high normalized pressure gradient βMHD and high edge current density. Experimental analysis and stability calculations indicate that the high poloidal beta with strong Shafranov shift, high βMHD and weak/negative magnetic shear improves the pedestal stability by decoupling the peeling and ballooning modes and stabilizing the ballooning modes, thus facilitating access to the second stable region of peeling-ballooning mode. The access to the second stable peeling-ballooning stability region opens Super-H-like channels without extremely strong shaping or strong torque injection. The high-pressure peeling pedestal allows the pedestal density to go beyond the Greenwald limit with strong ExB shear maintained: pedestal pressure increases with pedestal density even when n ped >n G , until reaching the ideal MHD instability boundary, where giant ELMs occur. The giant ELMs are dominated by a strong n=1 component and cause a large reduction of the edge pressure, but a negligible change of the core pressure, consistent with kink/peeling-mode induced instability. The pedestal recovers from the collapse and typically sustains a high baseline density, around the Greenwald limit, during the whole discharge duration. Experiments also found that internal transport barriers and n ped ~0.9nG, peeling limited pedestals could be simultaneously achieved in high β N plasmas, while an internal feedback between ITB strength and pedestal performance is found.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Realization of thousand-second improved confinement plasma with Super I-mode in Tokamak EAST

Mastering nuclear fusion, which is an abundant, safe, and environmentally competitive energy, is a great challenge for humanity. Tokamak represents one of the most promising paths toward controlled fusion. Obtaining a high-performance, steady-state, and long-pulse plasma regime remains a critical issue. Recently, a big breakthrough in steady-state operation was made on the Experimental Advanced Superconducting Tokamak (EAST). A steady-state plasma with a world-record pulse length of 1056 s was obtained, where the density and the divertor peak heat flux were well controlled, with no core impurity accumulation, and a new high-confinement and self-organizing regime (Super I-mode = I-mode + e-ITB) was discovered and demonstrated. These achievements contribute to the integration of fusion plasma technology and physics, which is essential to operate next-step devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Assessing Strain Rate Sensitivity of Nanotwinned Al–Zr Alloys through Nanoindentation

Nanotwinned metals have exhibited many enhanced physical and mechanical properties. Twin boundaries have recently been introduced into sputtered Al alloys in spite of their high stacking fault energy. These twinned Al alloys possess unique microstructures composed of vertically aligned Σ3(112) incoherent twin boundaries (ITBs) and have demonstrated remarkable mechanical strengths and thermal stability. However, their strain rate sensitivity has not been fully assessed. A modified nanoindentation method has been employed here to accurately determine the strain rate sensitivity of nanotwinned Al–Zr alloys. The hardness of these alloys reaches 4.2 GPa while simultaneously exhibiting an improved strain rate sensitivity. The nanotwinned Al–Zr alloys have shown grain size-dependent strain rate sensitivity, consistent with previous findings in the literature. This work provides insight into a previously unstudied aspect of nanotwinned Al alloys.

36 MATERIALS SCIENCE↗
NASA NTRS1989

Development and refinement of test bed simulations

Lewis Research Center of NASA, with support from Rocketdyne, was engaged in non-real time computer simulation effort for the Space Station Freedom Electric Power System (EPS) EASY5, a simulation package, is used as the primary tool for this activity. Early in the design of the EPS, two test beds were set up at Lewis. The Integrated Test Bed (ITB), that combines and upgrades these test beds, is in the planning stage. The test beds are designed to functionally represent many of the components of the EPS and their interconnections. The simulation effort is primarily directed towards these test beds. Model verification is performed using test bed data.

Dravid, Narayan V.↗
NASA NTRS1989

Development and refinement of test bed simulations

Lewis Research Center of NASA, with support from Rocketdyne, has engaged in a nonreal-time computer simulation effort for the Space Station Freedom Electric Power System (EPS). EASYS, a simulation package, is used as the primary tool for this activity. Early in the design of the EPS, two test beds were set up at Lewis. The Integrated Test Bed (ITB) that combines and upgrades these test beds is in the planning stage. The test beds are designed to functionally represent many of the components of the EPS and their interconnections. The simulation effort is primarily directed towards these test beds. Model verification is performed using test bed data.

Dravid, N. V.↗
NASA NTRS2005

Joint Test Protocol for Validation of Alternative Low-Emission Surface Preparation/Depainting Technologies for Structural Steel

Headquarters National Aeronautics and Space Administration (NASA) chartered the Acquisition Pollution Prevention (AP2) Office to coordinate agency activities affecting pollution prevention issues identified during system and component acquisition and sustainment processes. The primary objectives of the AP2 Office are to: (1) Reduce or eliminate the use of hazardous materials (HazMats) or hazardous processes at manufacturing, remanufacturing, and sustainment locations. (2) A void duplication of effort in actions required to reduce or eliminate HazMats through joint center cooperation and technology sharing. This project will identify, evaluate and approve alternative surface preparation technologies for use at NASA and Air Force Space Command (AFSPC) installations. Materials and processes will be evaluated with the goal of selecting those processes that will improve corrosion protection at critical systems, facilitate easier maintenance activity, extend maintenance cycles, eliminate flight hardware contamination and reduce the amount of hazardous waste generated. This Joint Test Protocol (JTP) contains the critical requirements and tests necessary to qualify alternative Low-Emission Surface Preparation/Depainting Technologies for Structural Steel Applications. These tests were derived from engineering, performance, and operational impact (supportability) requirements defined by a consensus of NASA and Air Force Space Command (AFSPC) participants. The Field Test Plan (FTP), entitled Joint Test Protocol for Validation of Alternative Low Emission Surface Preparation/Depainting Technologies for Structural Steel, prepared by ITB, defines the field evaluation and testing requirements for validating alternative surface preparation/depainting technologies and supplements the JTP.

Lewis, Pattie↗
NASA NTRS2011

Potential Alternatives Report for Validation of Alternatives to Aliphatic Isocyanate Polyurethanes

Identifying and selecting alternative materials and technologies that have the potential to reduce the identified HazMats and hazardous air pollutants (HAPs), while incorporating sound corrosion prevention and control technologies, is a complicated task due to the fast pace at which new technologies emerge and rules change. The alternatives are identified through literature searches, electronic database and Internet searches, surveys, and/or personal and professional contacts. Available test data was then compiled on the proposed alternatives to determine if the materials meet the test objectives or if further)laboratory or field-testing will be required. After reviewing technical information documented in the PAR, government representatives, technical representatives from the affected facilities, and other stakeholders involved in the process will select the list of viable alternative coatings for consideration and testing under the project's Joint Test Protocol entitled Joint Test Protocol for Validation of Alternatives to Aliphatic Isocyanate Polyurethanes and Field Test Plan entitled Field Evaluations Test Plan for Validation of Alternatives to Aliphatic Isocyanate Polyurethanes, both prepared by ITB. Test results will be reported in a Joint Test Report upon completion oftesting. The selection rationale and conclusions are documented in this PAR. A cost benefit analysis will be prepared to quantify the estimated capital and process costs of coating alternatives and cost savings relative to the current coating processes, however, some initial cost data has been included in this PAR. For this coatings project, isocyanates, as found in aliphatic isocyanate polyurethanes, were identified as the target HazMat to be eliminated. Table 1-1 lists the target HazMats, the related process and application, current specifications, and affected programs.

Lewis, pattie↗
DOE OSTI2025

Recovery of Scandium from Bauxite Residue Using Sulfation Roasting-Assisted Water Leaching Process

Here, this study presents a method for recovering scandium from Indonesian bauxite residue (red mud) through a sulfation roasting-assisted water leaching process. Ammonium sulfate, (NH 4 ) 2 SO 4 , was chosen as the sulfate source for its lower melting point, less corrosivity, decreased toxicity, and the potential for ammonia recovery. A modified mixing system was introduced to improve the distribution of (NH 4 ) 2 SO 4 on red mud particles by combining them in water. A series of experiments were conducted to optimize the sulfation roasting process by examining the effects of the (NH 4 ) 2 SO 4 /red mud ratio, temperature, and roasting time. Subsequently, water leaching was optimized while considering the effect of leaching time and liquid-to-solid (L/S) ratio. The leaching of scandium from the roasted red mud showed rapid kinetics, even when using only water. Under the roasting conditions of 1/1 (g/g) (NH 4 ) 2 SO 4 /red mud ratio, 700°C, 60 min roasting time, and the leaching conditions of 65°C, 60 min, and 10 mL/g (L/S), over 90% of scandium was recovered, along with 64.4% Al leaching and below 8% Fe leaching. These results were further corroborated through comprehensive analyses such as x-ray diffraction (XRD) and scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS). This study offers insights into an alternative, more environmentally friendly method for Sc recovery from red mud, promoting the sustainable use of hazardous waste like red mud.

ammonium sulfate↗
DOE OSTI2020

Theory for transport in magnetized plasmas

We present a two fluid model for anomalous thermal, particle and momentum transport which has been derived from kinetic theory using a small parameter ε~10-2. This small parameter can come from either the ratio of wave frequency to cyclotron frequency or the ratio of potential to thermal energies. This fluid model is strongly nonlinear and has an exact closure within the accuracy ε. It can be used to simulate the full radius of a tokamak including internal and edge transport barriers at the same time without introducing any local assumptions for physics model or grid size. It involves a full transport matrix, thus giving possibility for both density and heat pinches. The model can be derived from the Vlasov equation, adding also close collisions and includes particle pinches of the type found in the magnetosphere and in the Massachusetts Institute of Technology elevated dipole machine. Pinches are also in agreement for the heat pinch experiments on Doublet III D including simultaneous particle and heat pinches. For tokamaks it gives the right scaling of confinement time versus heating power. Finally, we have also recovered the Turbulent Equipartition result that the density scales as inverse safety factor q in typical simulations. Thus this model is both fundamental and of high practical use.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Alfvén eigenmode-driven zonal modes saturate and heat thermal ions by cross-scale interactions

In scenarios where a sustained energetic particle source strongly drives toroidal Alfvén eigenmodes (TAE), and phase-space transport is insufficient to saturate TAE, this novel theory of TAE-zonal mode (ZM)-turbulence—self-regulated by cross-scale interactions (including collisionless ZF damping) – merits consideration. Zonal modes are driven by Reynolds and Maxwell stresses, without the onset of modulational instability. TAE evolution in the presence of ZMs conserves energy and closes the system feedback loop. The saturated zonal shears can be sufficient to suppress ambient drift-ion temperature gradient (ITG) turbulence, achieving an enhanced core confinement regime. The saturated state is regulated by linear and turbulent zonal flow drag. This regulation leads to bursty TAE spectral oscillations, which overshoot while approaching saturation. Heating by both collisional and collisionless ZM damping deposits alpha particle energy into the thermal plasma, achieving effective alpha channeling. This theory offers a mechanism for EP-induced transport barrier formation, and predicts a novel thermal ion heating mechanism.

ITB↗
DOE OSTI2026

On FIRE mode in KSTAR

We report on the status of Fast Ion Regulated Enhancement (FIRE) mode experiments in the Korea Superconducting Tokamak Advanced Research. This regime is being developed for high-performance, steady-state operation which features a stationary ion internal transport barrier, enabling a central ion temperature approaching 10 keV to be sustained for up to 50 s, without the need for delicate profile control and with no significant impurity accumulation. As its key novelty lies in the significant contribution of fast ions that stabilize core turbulence, the regime has been named FIRE mode. To achieve this regime, neutral beam injection is applied at moderate power levels near the L–H power threshold, while maintaining low plasma density to avoid the L–H transition. The scenario is typically established in diverted magnetic configurations. The core features of FIRE mode were investigated through power balance analysis and fluctuation measurements, revealing a clear transport bifurcation in the ion channel. At the plasma edge, FIRE mode occasionally exhibits I-mode characteristics, particularly in unfavorable magnetic null configurations with q 95 ∼ 4, including the presence of weakly coherent modes. In terms of MHD activity, sawtooth oscillations are observed but appear to be stabilized during the high-performance phase. Fast ion-driven Alfvénic eigenmodes (AEs), indicated by strong frequency chirping near 200 kHz, are also observed. Additionally, lower-frequency MHD activities, distinct from the fast ion-driven AEs, are present and have some influence on plasma performance. The enhancement of core confinement is primarily attributed to fast ion effects, which were evaluated with respect to dilution, alpha stabilization, and resonant interactions with turbulence using gyrokinetic analyses. Among these, the dilution effect was found to be the most dominant. The characteristics of FIRE mode were compared with those of other hot ion plasma scenarios, such as supershot and hot ion mode. While they share many similarities, FIRE mode is distinguished by the accessibility to conditions with T i ≈ T e , presence of I-mode edge features, and its long-duration sustainment. Predictive simulations of FIRE mode were performed using integrated transport modeling with TRIASSIC, employing the TGLF anomalous transport model. These simulations confirmed the critical role of fast ions in achieving this regime. The future prospect of FIRE mode for application in fusion reactors is discussed, with an emphasis on possibly extending the regime to higher density operation.

FIRE mode↗